Download or read book Boundary Layer and Flow Control written by G. V. Lachmann and published by . This book was released on 1961 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Boundary Layer and Flow Control written by G. V. Lachmann and published by Elsevier. This book was released on 2014-05-12 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Boundary Layer and Flow Control: Its Principles and Application, Volume 2 focuses on the layer of fluid in the immediate area of a bounding surface where the effects of viscosity are substantial. This book is organized into two main topics—boundary layer control for low drag, and shock-induced separation and its prevention by design and boundary layer control. It specifically discusses the nature of transition, effect of two-dimensional and isolated roughness on laminar flow, and progress in the design of low drag aerofoils. The onset of separation effects for aerofoils and wings, shock-induced separation for laminar boundary layers, and shock-induced separation for laminar boundary layers are also deliberated. This volume is recommended to physicists and specialists interested in boundary layer and flow control.
Download or read book Viscous Drag Reduction in Boundary Layers written by and published by AIAA. This book was released on 1990 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analysis of the Effects of Boundary layer Control on the Take off Performance Characteristics of a Liaison type Airplane written by Elmer A. Horton and published by . This book was released on 1948 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: A performance analysis is given to determine whether bondary-layer control by suction might reduce the minimum take-off distance of a four- or five-place airplane. Results indicate that boudary-layer control might be effective in improving the take-off characteristics of this type airplane having wing loading of 10 or more pounds per square foot and aspect ratios of 10 or more.
Download or read book Boundary Layer and Flow Control written by Gustav Victor Lachmann and published by . This book was released on 1961 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Shock Wave Boundary Layer Interactions written by Holger Babinsky and published by Cambridge University Press. This book was released on 2011-09-12 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shock wave-boundary-layer interaction (SBLI) is a fundamental phenomenon in gas dynamics that is observed in many practical situations, ranging from transonic aircraft wings to hypersonic vehicles and engines. SBLIs have the potential to pose serious problems in a flowfield; hence they often prove to be a critical - or even design limiting - issue for many aerospace applications. This is the first book devoted solely to a comprehensive, state-of-the-art explanation of this phenomenon. It includes a description of the basic fluid mechanics of SBLIs plus contributions from leading international experts who share their insight into their physics and the impact they have in practical flow situations. This book is for practitioners and graduate students in aerodynamics who wish to familiarize themselves with all aspects of SBLI flows. It is a valuable resource for specialists because it compiles experimental, computational and theoretical knowledge in one place.
Download or read book Flow Control Techniques and Applications written by Jinjun Wang and published by Cambridge University Press. This book was released on 2018-12-13 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master the theory, applications and control mechanisms of flow control techniques.
Download or read book Boundary Layer Theory written by Hermann Schlichting (Deceased) and published by Springer. This book was released on 2016-10-04 with total page 814 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition of the near-legendary textbook by Schlichting and revised by Gersten presents a comprehensive overview of boundary-layer theory and its application to all areas of fluid mechanics, with particular emphasis on the flow past bodies (e.g. aircraft aerodynamics). The new edition features an updated reference list and over 100 additional changes throughout the book, reflecting the latest advances on the subject.
Download or read book Analysis of the Effects of Boundary layer Control on the Power off Landing Performance Characteristics of a Liaison Type of Airplane written by Elmer A. Horton and published by . This book was released on 1950 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt: An investigation was made to determine the effects of boundary-layer control on the landing performance characteristics of a liaison type of airplane having a payload of 1500 pounds and a flight duration of 5 hours. The aspect ratio was varied from 5 to 15, the wing span from 30 to 100 feet, and the brake horsepower from 300 to 1200. The use of boundary-layer control caused reduction in total landing distance (25 to 40 percent), ground-run distance, gliding speed, and stalling speed whereas sinking speed was increased only slightly.
Download or read book Boundary Layer Theory written by Herrmann Schlichting and published by Springer Science & Business Media. This book was released on 2003-05-20 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: A new edition of the almost legendary textbook by Schlichting completely revised by Klaus Gersten is now available. This book presents a comprehensive overview of boundary-layer theory and its application to all areas of fluid mechanics, with emphasis on the flow past bodies (e.g. aircraft aerodynamics). It contains the latest knowledge of the subject based on a thorough review of the literature over the past 15 years. Yet again, it will be an indispensable source of inexhaustible information for students of fluid mechanics and engineers alike.
Download or read book Advanced Concepts for Boundary Layer Control written by and published by . This book was released on 2000 with total page 69 pages. Available in PDF, EPUB and Kindle. Book excerpt: A series of numerical experiments were performed to explore new control strategies suitable for distributed control. All numerical experiments were performed in a fully developed turbulent channel flow. Three different control schemes were developed. These include applications of a neural network, a suboptimal control theory and systems control theory. In all cases, substantial drag reductions were achieved. A simple feedback law obtained from the neural network was implemented into a chip, which contains microelectronics (for the control logic), microsensors and microactuators (cu M chip). All cases used surface blowing and suction as control input. Development of a new numerical method for simulating a turbulent flow over distributed microflap actuators is included.
Download or read book Boundary layer Transition Results from the F 16XL 2 Supersonic Laminar Flow Control Experiment written by Laurie A. Marshall and published by . This book was released on 1999 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt: A variable-porosity suction glove has been flown on the F-16XL-2 aircraft to demonstrate the feasibility of this technology for the proposed High-Speed Civil Transport (HSCT). Boundary-layer transition data have been obtained on the titanium glove primarily at Mach 2.0 and altitudes of 53,000-55,000 ft. The objectives of this supersonic laminar flow control flight experiment have been to achieve 50- to 60-percent-chord laminar flow on a highly swept wing at supersonic speeds and to provide data to validate codes and suction design. The most successful laminar flow results have not been obtained at the glove design point (Mach 1.9 at an altitude of 50,000 ft). At Mach 2.0 and an altitude of 53,000 ft, which corresponds to a Reynolds number of 22.7 multiplied by 10[factor 6], optimum suction levels have allowed long runs of a minimum of 46-percent-chord laminar flow to be achieved. This paper discusses research variables that directly impact the ability to obtain laminar flow and techniques to correct for these variables.
Download or read book Evaluation of Porous Materials for Boundary layer Control written by Battelle Memorial Institute and published by . This book was released on 1956 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Experimental Investigation of Boundary layer Control for Drag Reduction of a Swept wing Section at Low Speed and High Reynolds Numbers written by Donald E. Gault and published by . This book was released on 1960 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Natural Laminar Flow and Laminar Flow Control written by R.W. Barnwell and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research on laminar flow and its transition to turbulent flow has been an important part of fluid dynamics research during the last sixty years. Since transition impacts, in some way, every aspect of aircraft performance, this emphasis is not only understandable but should continue well into the future. The delay of transition through the use of a favorable pressure gradient by proper body shaping (natural laminar flow) or the use of a small amount of suction (laminar flow control) was recognized even in the early 1930s and rapidly became the foundation of much of the laminar flow research in the U.S. and abroad. As one would expect, there have been many approaches, both theoretical and experimental, employed to achieve the substantial progress made to date. Boundary layer stability theories have been formu lated and calibrated by a good deal of wind tunnel and flight experiments. New laminar now airfoils and wings have been designed and many have been employed in aircraft designs. While the early research was, of necessity, concerned with the design of subsonic aircraft interest has steadily moved to higher speeds including those appropriate to planetary entry. Clearly, there have been substantial advances in our understanding of transition physics and in the development and application of transition prediction methodolo gies to the design of aircraft.
Download or read book Flight Experiments on Boundary layer Control for Low Drag written by M. R. Head and published by . This book was released on 1957 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Drag Reduction by Shock and Boundary Layer Control written by Egon Stanewsky and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: The survival of the Aeronautical Industries of Europe in the highly competitive World Aviation Market is strongly dependent on such factors as time-to-market of a new or derivative aircraft and on its manufacturing costs but also on the achievement of a competitive technological advantage by which an increased market share can be gained. Recognizing this, cooperative research is continuously encouraged and co-financed by the European Union in order to strengthen the scientific and technological base of the Aeronautical Industries thus providing - among others - the technological edge needed for survival. Corresponding targets of research within Area 3, Technologies for Transport Means, and here in particular Area 3A, Aeronautics Technologies, of the Industrial and Materials Technologies Program ( Brite -EuRam III, 1994 -1998) have been identified to be aircraft efficiency, cost effectiveness and environmental impact. Concerning aircraft efficiency - relevant to the present research - a reduction in aircraft drag of 10%, a reduction in aircraft fuel consumption of 30%, and a reduction in airframe, engine and system weight of 20% are envisaged. Meeting these objectives has, of course, also a strong positive impact on the environment.