Download or read book Boundary Element Technology VII written by C.A. Brebbia and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 911 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seventh International Conference on Boundary Element Technology 'Betech 92', held at the University of New Mexico in Albuquerque, June 1992
Download or read book The Boundary Element Method Volume 2 written by M. H. Aliabadi and published by John Wiley & Sons. This book was released on 2002-04-29 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: The boundary element method (BEM) is a modern numerical technique, which has enjoyed increasing popularity over the last two decades, and is now an established alternative to traditional computational methods of engineering analysis. The main advantage of the BEM is its unique ability to provide a complete solution in terms of boundary values only, with substantial savings in modelling effort. This two-volume book set is designed to provide the readers with a comprehensive and up-to-date account of the boundary element method and its application to solving engineering problems. Each volume is a self-contained book including a substantial amount of material not previously covered by other text books on the subject. Volume 1 covers applications to heat transfer, acoustics, electrochemistry and fluid mechanics problems, while volume 2 concentrates on solids and structures, describing applications to elasticity, plasticity, elastodynamics, fracture mechanics and contact analysis. The early chapters are designed as a teaching text for final year undergraduate courses. Both volumes reflect the experience of the authors over a period of more than twenty years of boundary element research. This volume, Applications in Solids and Structures, provides a comprehensive presentation of the BEM from fundamentals to advanced engineering applications and encompasses: Elasticity for 2D, 3D and Plates and Shells Non-linear, Transient and Thermal Stress Analysis Crack Growth and Multi-body Contact Mechanics Sensitivity Analysis and Optimisation Analysis of Assembled Structures. An important feature of this book is the in-depth presentation of BEM formulations in all the above fields, including detailed discussions of the basic theory, numerical algorithms and where possible simple examples are included, as well as test results for practical engineering applications of the method. Although most of the methods presented are the latest developments in the field, the author has included some simple techniques, which are helpful in understanding the computer implementation of BEM. Another notable feature is the comprehensive presentation of a new generation of boundary elements known as the Dual Boundary Element Method. Written by an internationally recognised authority in the field, this is essential reading for postgraduates, researchers and practitioners in Aerospace, Mechanical and Civil Engineering and Applied Mathematics.
Download or read book Symmetric Galerkin Boundary Element Method written by Alok Sutradhar and published by Springer Science & Business Media. This book was released on 2008-09-26 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Symmetric Galerkin Boundary Element Method presents an introduction as well as recent developments of this accurate, powerful, and versatile method. The formulation possesses the attractive feature of producing a symmetric coefficient matrix. In addition, the Galerkin approximation allows standard continuous elements to be used for evaluation of hypersingular integrals. FEATURES • Written in a form suitable for a graduate level textbook as well as a self-learning tutorial in the field. • Covers applications in two-dimensional and three-dimensional problems of potential theory and elasticity. Additional basic topics involve axisymmetry, multi-zone and interface formulations. More advanced topics include fluid flow (wave breaking over a sloping beach), non-homogeneous media, functionally graded materials (FGMs), anisotropic elasticity, error estimation, adaptivity, and fracture mechanics. • Presents integral equations as a basis for the formulation of general symmetric Galerkin boundary element methods and their corresponding numerical implementation. • Designed to convey effective unified procedures for the treatment of singular and hypersingular integrals that naturally arise in the method. Symbolic codes using Maple® for singular-type integrations are provided and discussed in detail. • The user-friendly adaptive computer code BEAN (Boundary Element ANalysis), fully written in Matlab®, is available as a companion to the text. The complete source code, including the graphical user-interface (GUI), can be downloaded from the web site http://www.ghpaulino.com/SGBEM_book. The source code can be used as the basis for building new applications, and should also function as an effective teaching tool. To facilitate the use of BEAN, a video tutorial and a library of practical examples are provided.
Download or read book BETECH International Conference on Boundary Element Technology 7 written by and published by . This book was released on 1992 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Boundary Element Technology VI written by C. A. Brebbia and published by . This book was released on 1991 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Boundary Element Methods for Heat Transfer with Phase Change Problems Theory and Application written by S. G. Ahmed and published by Bentham Science Publishers. This book was released on 2022-06-30 with total page 647 pages. Available in PDF, EPUB and Kindle. Book excerpt: The mathematical modelling of free and moving boundary problems are an important topic in engineering, industry, technology and theoretical sciences. These models allow us to make calculations involved in phase change transitions of materials due to heat transfer. Boundary layer applications are widespread in research and industry. Boundary Element Methods for Heat Transfer with Phase Change Problems: Theory and Application equips the reader with information about heat transfer problems occurring during phase changes. The book covers several boundary element methods, including methods for phase changes, fixed and moving domains and new approaches. The contents are rounded off with chapters on numerical results and industrial applications. Key features: - Simple, didactic presentation of boundary layer problems for heat transfer problems - Covers a wide range of boundary element methods - Includes methods for fixed and moving domains - Explains industrial applications of the methods - Includes solutions to numerical problems The book serves as a textbook for students of advanced mathematics and engineering. It is also a handbook for researchers working on numerical analysis, who require a focused volume on boundary element methods for heat transfer applications.
Download or read book Boundary Element Methods for Electrical Engineers written by Dragan Poljak and published by WIT Press. This book was released on 2005 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents Boundary Element Method (BEM) in a simple fashion in order to help the beginner to understand the very basic principles of the method. This book initially derives BEM for the simplest potential problems, and subsequently builds on these to formulate BEM for a wide range of applications in electromagnetics.
Download or read book The Boundary Element Method Volume 1 written by L. C. Wrobel and published by John Wiley & Sons. This book was released on 2002-04-22 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The boundary element method (BEM) is a modern numerical techniquewhich has enjoyed increasing popularity over the last two decades,and is now an established alternative to traditional computationalmethods of engineering analysis. The main advantage of the BEM isits unique ability to provide a complete solution in terms ofboundary values only, with substantial savings in modelling effort. This two-volume book set is designed to provide the readers with acomprehensive and up-to-date account of the boundary element methodand its application to solving engineering problems. Each volume isa self-contained book including a substantial amount of materialnot previously covered by other text books on the subject. Volume 1covers applications to heat transfer, acoustics, electrochemistryand fluid mechanics problems, while volume 2 concentrates on solidsand structures, describing applications to elasticity, plasticity,elastodynamics, fracture mechanics and contact analysis. The earlychapters are designed as a teaching text for final yearundergraduate courses. Both volumes reflect the experience of theauthors over a period of more than twenty years of boundary element research. This volume, Applications in Thermo-Fluids and Acoustics, provides acomprehensive presentation of the BEM from fundamentals to advancedengineering applications and encompasses: Steady and transient heat transfer Potential and viscous fluid flows Frequency and time-domain acoustics Corrosion and other electrochemical problems. A unique feature of this book is an in-depth presentation of BEMformulations in all the above fields, including detaileddiscussions of the basic theory, numerical algorithms and practicalengineering applications of the method. Written by an internationally recognised authority in the field,this is essential reading for postgraduates, researchers andpractitioners in civil, mechanical and chemical engineering andapplied mathematics.
Download or read book Hydraulic and Civil Engineering Technology VII written by M. Yang and published by IOS Press. This book was released on 2022-12-23 with total page 1428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering technology is of crucial importance to the infrastructure on which modern societies depend, and keeping abreast of the latest research and developments in the field is of vital importance. This book presents the proceedings of HCET 2022, the 7th International Technical Conference on Frontiers of Hydraulic and Civil Engineering Technology, originally due to be held, in Sanya, China, from 25-27 September 2022, but instead held as a fully virtual event on Zoom due to continued uncertainty related to the Covid 19 pandemic. HCET is a platform for the dissemination of research results on the latest advances in the areas of hydraulic and civil engineering technology and environmental engineering, and provides an opportunity for scientists, researchers and engineers from around the world to exchange their findings, discuss developments, and possibly establish a basis for collaboration. A total of 275 submissions were received from international contributors, and all were subjected to a rigorous peer-review process, with each paper reviewed by a minimum of two experts. Papers were also checked for quality and plagiarism, after which, 163 papers were accepted for presentation and publication. Topics covered include the research and development of concrete structure design and analysis, structural mechanics and structural engineering, geological exploration and earthquake engineering, building technology, urban planning, energy, environment and advanced engineering science and applications. The book offers a state-of-the-art overview of recent developments, and will be of interest to all those working in the fields of hydraulic and civil engineering technology.
Download or read book Modelling of Cathodic Protection Systems written by R. A. Adey and published by WIT Press. This book was released on 2005-11-04 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an introduction to the state-of-the-art in computer modelling of corrosion and related electrochemical processes. Aimed at corrosion engineers, physicists, and model developers, this book contains contributions from the researchers and developers of corrosion modelling tools and users who apply the technology in their industry.
Download or read book Contemporary Research in Engineering Science written by Romesh C. Batra and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue failures occur in aerospace,marine,nuclear structures and automobile com ponents from initiation and propagation of cracks from holes,scratches or defects in the material. To design against these failures, crack propagation life and fracture strength need to be accurately predicted. It is reported in the literature, that these failures often initiate as surface cracks, corner cracks and cracks emanating from fastner holes. Such cracks are with elliptic or nearly elliptic in shapes. The deviation from elliptic shape is due to varying constraint effect along the crack front. Even in situations, when the cracks are through the thickness of the material, there would be thicknesswise variation of constraint effects leading to three dimensional nature of crack growth. Accurate predictions of the crack growth in these cases by numerical methods can be made only by solving three-dimensional boundary value problems. Empirical relationships have been developed [1] based on Linear Elastic Fracture Mechanics over years describing fatigue crack growth response. Some of these empirical relationships required modifications in the later stages, to meet the design applications. The Crack closure phenomenon discovered by Elber[2, 3] during the crack growth phase is mainly attributed to the local material yielding near the crack tip and the consequent residual plastic wake behind the crack tip. It helped considerably in understanding several aspects of fatigue crack growth and rewrite these relations.
Download or read book The Boundary Element Method with Programming written by Gernot Beer and published by Springer Science & Business Media. This book was released on 2008-09-03 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thorough yet understandable introduction to the boundary element method presents an attractive alternative to the finite element method. It not only explains the theory but also presents the implementation of the theory into computer code, the code in FORTRAN 95 can be freely downloaded. The book also addresses the issue of efficiently using parallel processing hardware in order to considerably speed up the computations for large systems. The applications range from problems of heat and fluid flow to static and dynamic elasto-plastic problems in continuum mechanics.
Download or read book e Engineering Digital Enterprise Technology VII written by Kai Cheng and published by Trans Tech Publications Ltd. This book was released on 2009-10-12 with total page 1470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). During the past decade, digital manufacturing science and technology have experienced very rapid development. These have not only provided industry with new methods, new tools and new digitalized products - which have transformed everything from design, materials processing to operational and management procedures - but are also changing the intercommunications, modes of thought and working environments of everybody in the manufacturing field. Digital manufacturing has brought remarkable and fundamental improvements to manufacturing industry and related research.
Download or read book Boundary Elements written by C. A. Brebbia and published by WIT Press. This book was released on 1994-05-31 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: This best-selling text provides a simple introduction to the Boundary Element Method. Based on the authors' long teaching experience it is designed to convey in the most effective manner the fundamentals of the method. The book is presented in a way which makes it accessible to both undergraduate and graduate students as well as to practising engineers who want to learn the foundations of the technique. Of particular interest is the way in which Boundary Element concepts are introduced and immediately applied in simple, but useful, computer codes to facilitate understanding. A CD with the complete listing of program codes in Fortran is also included.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1987 with total page 934 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Practical Guide to Boundary Element Methods with the Software Library BEMLIB written by C. Pozrikidis and published by CRC Press. This book was released on 2002-05-15 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: The boundary-element method is a powerful numerical technique for solving partial differential equations encountered in applied mathematics, science, and engineering. The strength of the method derives from its ability to solve with notable efficiency problems in domains with complex and possibly evolving geometry where traditional methods can be d
Download or read book Boundary Element Technology XV written by C. A. Brebbia and published by WIT Press (UK). This book was released on 2003 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Featuring papers from the Fifteenth International Conference on Boundary Element Technology (BETECH), this book presents some of the most interesting and recent developments in the method, including its use in solving a variety of industrial problems.