Download or read book Bone Cements and Cementing Technique written by U. Henze and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: G. H. I. M. WALENKAMP, D. W. MURRAY Since the first use of bone cement, there has been much discussion about this important tool in arthroplasty. Many authors consider the cemented prosthesis as the gold standard when evaluating the outcome of primary prostheses. In a large number of total hip arthroplasties, as registered in the Scandi navian Hip Registers, important differences in revision risks have been docu mented between hospitals. These differences are partly due to the use of di verse cement techniques. In the analysis of data, the influence of these tech niques, as well as the different cement types, is clear. A recent disaster with a newly developed cement also illustrated that the quality of the cement must be assured, and that the introduction of a new material must be carefully prepared and followed-up. The new Palamed cement has been developed by the makers of the well known Palacos and Refobacin Palacos, which appeared to be the best ce ments in the Swedish register. An improvement was noted in slightly better handling characteristics, but the end product is the same as Palacos. As men tioned, this cement will be carefully followed-up in the near future. However, its introduction is a good reason to gather the expertise of some of the lead ing figures in the field in this book. II History of Bone Cements CHAPTER 2. 1 Industrial Development of Bone Cement Twenty-Five Years of Experience w. EGE, K. D.
Download or read book The Well Cemented Total Hip Arthroplasty written by Steffen Breusch and published by Springer Science & Business Media. This book was released on 2006-02-08 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cemented Total Hip Arthroplasty (THA) remains one of the most successful procedures in Orthopaedic surgery. It has become very clear that it is the surgical expertise, in particular the quality of the cementing technique, which will affect long-term outcome and success. It is the intention of this book to provide an up-to-date comprehensive assessment of the entire field of cemented THA. Special emphasis has been given to practice-relevant aspects: well-illustrated and detailed operative steps as a practical guideline, a basic science chapter and long-term outcome data are provided. Minimally invasive surgery, modern perioperative management and patient fast tracking are covered. A number of highly respected experts have contributed to this in-depth compilation of the "state of the art" in 2005. This book is written and intended for both, trainees and established arthroplasty surgeons who are dedicated to perform a well-cemented THA.
Download or read book Bone Cements written by Klaus-Dieter Kühn and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: Methyl methacrylate (MMA) is the basic component of bone cements. To use it, a dough is prepared from the liquid and powder by mixing right before application, which is normally done by the operating team. During its working phase the dough is then inserted into the tissue where polymerization is completed. Thus, the final implant polymethyl methacrylate (PMMA) is only created at the implantation site. Besides methyl methacrylate, bone cements sometimes contain other methacrylates, such as butyl methacrylate. To achieve X-ray opacity, radiopacifiers (zirconium dioxide or barium sulfate) are added to the powder. Both the liquid and powder components contain additives (initiator and activator) that launch polymerization and control the set ting when mixed together. Moreover, softener and emulsifiers are some times used. The addition of antibiotics to the powder component in order to prevent or treat infections has become especially important. Commercial bone cements differ in composition and the course of curing. Some are designed for high and others for low viscosity. The way the user handles and applies the cement always crucially influences the quality of the implant. This is why clear and comprehensive information about the cements should be available to show the user how all the relevant factors work It should also be possible together and how they depend on each other.
Download or read book Handbook of Bioceramics and Biocomposites written by Iulian Vasile Antoniac and published by Springer. This book was released on 2016-05-05 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook describes several current trends in the development of bioceramics and biocomposites for clinical use in the repair, remodelling, and regeneration of bone tissue. Comprehensive coverage of these materials allows fundamental aspects of the science and engineering to be seen in close relation to the clinical performance of dental and orthopaedic implants. Bioceramics and biocomposites appear to be the most dynamic area of materials development for both tissue engineering and implantable medical devices. Almost all medical specialties will continue to benefit from these developments, but especially dentistry and orthopaedics. In this Handbook, leading researchers describe the use of bionanomaterials to create new functionalities when interfaced with biological molecules or structures. Also described are technologies for bioceramics and biocomposites processing in order to fabricate medical devices for clinical use. Another important section of the book is dedicated to tissue regeneration with development of new matrices. A targeted or personalized treatment device reduces drug consumption and treatment expenses, resulting in benefits to the patient and cost reductions for public health systems. This authoritative reference on the state-of-the-art in the development and use of bioceramics and biocomposites can also serve as the basis of instructional course lectures for audiences ranging from advanced undergraduate students to post-graduates in materials science and engineering and biomedical engineering.
Download or read book Orthopaedic Bone Cements written by S Deb and published by Elsevier. This book was released on 2008-10-16 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bone cements are widely used in orthopaedic applications to anchor implants to existing bone, reconstruct bone and deliver bioactive agents to the body. With an increasing number of bone cements available, it is vital that the correct material is selected for specific clinical procedures. Orthopaedic bone cements reviews the most recent research in this field.Part one discusses the current uses of orthopaedic bone cements with chapters on such topics as hip replacements, verteboplasty and wear particles and osteolysis. Part two reviews materials and types of cement such as acrylic, polymethylmethacrylate and calcium phosphate cements. Chapters in Part three address the mechanical properties of bone cements such as fracture toughness and dynamic creep. The final section examines methods to enhance the properties of bone cements with coverage of themes such as antibiotic loaded bone cements and bioactive cements.With its eminent editor and multidisciplinary team of international contributors, Orthopaedic bone cements is an invaluable reference for materials scientists, medical researchers and all those involved in the development of bone cements for orthopaedic applications and joint replacement. - Provides a review of recent research focussing on improving the mechanical and biological performance of bone cements - Discusses the current applications of bone cements particularly in hip replacement, verteboplasty and wear particles - Reviews types of materials and acrylic, polymethlymethacrylate and calcium phosphate as types of cements
Download or read book Joint Replacement Technology written by Peter A. Revell and published by Elsevier. This book was released on 2008-07-09 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: Joint replacement has been one of the major successes of modern medicine. Its continued success depends on effective collaboration between clinicians and researchers across many different areas in science and medicine. This important book brings together the wide range of research in this area and its implications for clinical practice.The book sets the scene with introductory chapters on joint biomechanics and tribology, materials for joint replacement and their interactions with the body, and regulatory issues. Part two reviews the use of metals and ceramics as joint replacement materials, joint design, bone cements and cementless fixation techniques, failure mechanisms and ways of predicting the lifetime of replacement joints. The third part of the book summarises research on how prosthetic joints interact with the body, including biological causes of joint failure, sterilisation techniques and the use of drug delivery systems to enhance joint replacement. The final group of chapters reviews key issues in replacing particular joints including the hip, knee, ankle, shoulder and elbow as well as developments in intervertebral disc and tempero-mandibular joint replacement technology.With its distinguished editor and international team of contributors, Joint replacement technology is a standard reference for the engineering and materials scientific communities, as well as surgeons seeking the best treatment for their patients. - Reviews joint biomechanics and tribology - Considers the use of metals and ceramics as joint replacement materials, joint design and bone cements - Summarises research on prosthetic interaction with the body
Download or read book Essentials of Cemented Knee Arthroplasty written by Erik Hansen and published by Springer Nature. This book was released on 2021-12-30 with total page 771 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Editors of “Essentials of Cemented Knee Arthroplasty” have compiled a comprehensive textbook on what many consider the most successful surgical procedure of the century. This book rounds out the compendium previously published by Springer on arthroplasty related topics: “The Well Cemented Total Hip Arthroplasty”, “PMMA Cements”, and “Management of Periprosthetic Joint Infection”. Unique to this text is the high quality contributions from over 160 world wide experts in the field, and provides a unique international perspective on the multifaceted topic of knee replacement surgery. Sections include a focus on Surgical Indications, Implant Design, Novel Technologies, Complications, and Cementing Technique, amongst others. Each Chapter not only draws on the most current literature on the subject, but also crystalizes the most important points into clinically relevant, practically applicable “take home messages”. This singular text is notable for not only its breadth, but also its depth, and will be an invaluable resource for knee arthroplasty surgeons throughout the globe.
Download or read book Implants for Surgery Acrylic Resin Cements written by British Standards Institute Staff and published by . This book was released on 2002-06-24 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: Implants (surgical), Cements, Acrylic resins, Surgical equipment, Orthopaedic equipment, Orthopaedics, Prosthetic devices, Packaging, Marking
Download or read book Postgraduate Orthopaedics written by Paul A. Banaszkiewicz and published by Cambridge University Press. This book was released on 2012-08-16 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: The must-have book for candidates preparing for the oral component of the FRCS (Tr and Orth).
Download or read book Computational Biomechanics of the Hip Joint written by Mohammed Rafiq Abdul Kadir and published by Springer Science & Business Media. This book was released on 2013-09-19 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents analyses of the most commonly reported failure modes of hip stems: loosening and thigh pain; both are attributed to the relative motion and instability at the bone-implant interface due to failure to achieve sufficient primary fixation. The book investigates various factors that could affect primary stability and therefore the long-term outcome of hip arthroplasty. The results complement experimental work carried out in this area as in-vitro experiments have several limitations that could be addressed through computer simulations.
Download or read book Prosthetic Joint Infections written by Trisha Peel and published by Springer. This book was released on 2017-11-28 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book outlines the most updated clinical guidelines that are vital for the prevention infections and care of patients with joint infections following a replacement surgery, one of the highest volume medical interventions globally. Sections address the diagnosis, management approaches and prevention of prosthetic joint infections. Written by experts in the field, this text provides a brief overview of the literature and current recommendations in each of the specified areas. Given the rapidly evolving state-of-play in this clinical area, this compendium grows increasingly important to clinicians in their management decisions. Prosthetic Joint Infections is a valuable resource for infectious disease specialists, epidemiologists, surgeons, and orthopedic specialists who may work with patients with prosthetic joint infections.
Download or read book Bone Repair Biomaterials written by Kendell Pawelec and published by Woodhead Publishing. This book was released on 2018-11-29 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bone Repair Biomaterials: Regeneration and Clinical Applications, Second Edition, provides comprehensive reviews on materials science, engineering principles and recent advances. Sections review the fundamentals of bone repair and regeneration, discuss the science and properties of biomaterials used for bone repair, including metals, ceramics, polymers and composites, and discuss clinical applications and considerations, with chapters on such topics as orthopedic surgery, tissue engineering, implant retrieval, and ethics of bone repair biomaterials. This second edition includes more chapters on relevant biomaterials and a greatly expanded section on clinical applications, including bone repair applications in dental surgery, spinal surgery, and maxilo-facial and skull surgery. In addition, the book features coverage of long-term performance and failure of orthopedic devices. It will be an invaluable resource for researchers, scientists and clinicians concerned with the repair and restoration of bone. - Provides a comprehensive review of the materials science, engineering principles and recent advances in this important area - Presents new chapters on Surface coating of titanium, using bone repair materials in dental, spinal and maxilo-facial and skull surgery, and advanced manufacturing/3D printing - Reviews the fundamentals of bone repair and regeneration, addressing social, economic and clinical challenges - Examines the properties of biomaterials used for bone repair, with specific chapters assessing metals, ceramics, polymers and composites
Download or read book Bioceramics and their Clinical Applications written by Tadashi Kokubo and published by Elsevier. This book was released on 2008-03-25 with total page 785 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioceramics have been used very successfully within the human body for many years. They are commonly used in orthopaedic surgery and dentistry but they are potentially suitable for a wide range of important applications within the medical device industry. This important book reviews the range of bioceramics, their properties and range of clinical uses.Chapters in the first section of the book discusses issues of significance to a range of bioceramics such as their structure, mechanical properties and biological interactions. The second part reviews the fabrication, microstructure and properties of specific bioceramics and glasses, concentrating on the most promising materials. These include alumina and zirconia ceramics, bioactive glasses and bioactive glass-ceramics, calcium sulphate, tricalcium phosphate-based ceramics, hydroxyapatite, tricalcium phosphate/hydroxyapatite biphasic ceramics, si-substrated hydroxyapatite, calcium phosphate cement, calcium phosphate coating, titania-based materials, ceramic-polymer composites, dental ceramics and dental glass-ceramics. The final group of chapters reviews the clinical applications of bioceramics in joint replacement, bone grafts, tissue engineering and dentistry.Bioceramics and their clinical applications is written by leading academics from around the world and it provides an authoritative review of this highly active area of research. This book is a useful resource for biomaterials scientists and engineers, as well as for clinicians and the academic community. - Provides an authoritative review of this highly active area of research - Discusses issues of significance of a range of bioceramics such as their structure, mechanical properties and biological interactions - Reviews the clinical applications of bioceramics in joint replacement, bone grafts, tissue engineering and dentistry
Download or read book Manual of Cementing Technique written by K. Draenert and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions by numerous experts
Download or read book Arthroplasty written by Plamen Kinov and published by IntechOpen. This book was released on 2013-02-20 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: New technologies, developments in implant design and advances in surgical technique have improved outcomes after joint replacement and decreased rate of complications. It is not a surprise that the number of arthroplasties increases steadily every year and nowadays more than one million patients undergo the procedure annually worldwide. This book is a sequel of a successful series dedicated to one of the fastest growing fields in orthopedics - arthroplasty. Aiming at dissemination of scientific research this book provides a profound overview of the recent evolution of technology and surgical techniques. New developments of implant design and current treatment strategies have been critically discussed by the contributing authors. The process of improving care for patients and standards of treatment requires straightforward access to up-to-date research and knowledge. The format of the publication allows easy and quick reference to shared ideas and concepts. We hope, that the current book will add significant contribution to the success of this endeavor.
Download or read book Biomedical Composites written by Luigi Ambrosio and published by Elsevier. This book was released on 2009-11-23 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biocomposites are widely used in the medical industry to repair and restore bone, tooth, cartilage skin and other tissues. Biomedical composites, provides a thorough review of the current status, recent progress and future trends in composites for biomedical applications.Part one discusses the fundamentals of biocomposites with chapters on natural composites, design and fabrication of biocomposites, and hard and soft tissue applications of biocomposites. Part two then reviews applications of biocomposites. Chapters discuss composites for bone repair, composite coatings for implants, composites for spinal implants, injectable composites and composites for tissue engineered scaffolds. Chapters in part three discuss the biocompatibility, mechanical behaviour and failure of biocomposites with such topics as cellular response, testing of biocomposites and tribology of biocomposites. Finally part four reviews the future for biocomposites with chapters on nano-structured biocomposites, developing biocomposites as scaffolds and biocomposites in tissue engineering and regenerative medicine.With its distinguished editor and team of international contributors, Biomedical composites is an essential reference to materials scientists and researchers in industry and academia, as well as all those concerned with this increasingly important field. - Provides a thorough review of the current status, recent progress and future trends in composites for biomedical applications - Discusses the fundamentals of biocomposites with chapters on natural composites, design and fabrication of biocomposites and their applications - Chapters address composites for bone repair, spinal implants and various other applications and discuss biocompatability, mechanical behaviour and failure of biocomposites
Download or read book Total Hip Replacement Surgery written by S. K. S. Marya and published by JP Medical Ltd. This book was released on 2010-10-09 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and authoritative book on total hip replacement surgery which focuses on surgical technique and also discusses preoperative planning, clinical assessment, hip scoring, radiology, templating and preparation. It includes extensive coverage of surgical techniques including cemented and un-cemented THR, post-operative recovery, planning and management of rehabilitation and physiotherapy.
