Download or read book Blowing Agents 99 written by and published by iSmithers Rapra Publishing. This book was released on 1999-12 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Foaming and Blowing Agents written by George Wypych and published by Elsevier. This book was released on 2022-03-12 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Foaming and Blowing Agents, Second Edition includes the most current information on foaming technology, guiding users on the proper selection of formulation, which is highly dependent on the mechanisms of action of blowing agents and foaming agents, as well as dispersion and solubility. The book includes properties of 23 groups of blowing agents and the typical range of technical performance for each group, including general properties, physical-chemical properties, health and safety, environmental impact, and applications in different products and polymers. All information is illustrated by chemical reactions and diagrams. Chapters in the book look at foaming mechanisms with the use of solid blowing agents, which are decomposed to the gaseous products by application of heat, production of gaseous products by chemical reaction, and foaming by gases and evaporating liquids. Introduces the fundamental mechanisms of action of blowing agents and foaming Includes best practice guidance to help engineers and technicians improve the efficiency of their existing foaming processes Enables practitioners to select blowing agents and foaming methods more effectively, thus reducing the risk of poor specification Introduces useful analytical techniques for foaming Discusses the environmental impact of foaming processes
Download or read book Blowing Agents and Foaming Processes 2001 written by and published by iSmithers Rapra Publishing. This book was released on 2001-12-31 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Blowing Agent Systems Formulations and Processing written by and published by iSmithers Rapra Publishing. This book was released on 1998 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Natural Fibre Reinforced Polymer Composites written by Sabu Thomas and published by Archives contemporaines. This book was released on 2009 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Blowing Agents for Polyurethane Foams written by S. N. Singh and published by iSmithers Rapra Publishing. This book was released on 2002 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This review discusses the legal requirements and property specifications for blowing agents in different applications. Each type of blowing agent is described. Key environmental and physical properties are listed, together with advantages and limitations. Foams are described by types and by applications. An additional indexed section containing several hundred abstracts from the Polymer Library gives useful references for further reading.
Download or read book Blowing Agents and Foaming Processes 2003 written by and published by iSmithers Rapra Publishing. This book was released on 2003 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymeric Foams written by Shau-Tarng Lee and published by CRC Press. This book was released on 2004-05-27 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the inaugural volume a series entitled Polymeric Foams: Technology and Applications. Generally, thermoplastic and thermoset foams have been treated as two separate practices in industry. Polymeric Foams: Mechanisms and Materials presents the basics of foaming in general build a strong foundation to those working in both thermoplastic a
Download or read book Blowing Agents and Foaming Processes written by and published by iSmithers Rapra Publishing. This book was released on 2004 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Polymer Foams written by David Eaves and published by iSmithers Rapra Publishing. This book was released on 2004 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook reviews the chemistry, manufacturing methods, properties and applications of the synthetic polymer foams used in most applications. In addition, a chapter is included on the fundamental principles, which apply to all polymer foams. There is also a chapter on the blowing agents used to expand polymers and a chapter is on microcellular foams - a relatively new development where applications are still being explored.
Download or read book Plastics Additives written by Geoffrey Pritchard and published by iSmithers Rapra Publishing. This book was released on 2005 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: The additive families are considered with an outline of the technical issues and the trends driving the markets. The main marketplaces for each additive type are discussed and the trends outlined. It contains an overview of the significant trends in the four largest plastics market sectors: packaging, construction, automotive and electrical and electronics. The report focuses on the important issues within Europe, with comment on the relevant trends in North America and Asia. The report provides discussion of the trends in material consumption and specific additive groups. It also includes brief company news and information for some of the leading additive suppliers.
Download or read book Monthly Catalog of United States Government Publications written by and published by . This book was released on 1999 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Foamability of Thermoplastic Polymeric Materials written by Suprakas Sinha Ray and published by Elsevier. This book was released on 2021-09-24 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Foamability of Thermoplastic Polymeric Materials presents a cutting-edge approach to thermoplastic polymeric foams, drawing on the latest research and guiding the reader through the fundamental science, foamability, structure-property-processing relationship, multi-phase polymeric materials, degradation characteristics of biodegradable foams and advanced applications. Sections provide detailed information on foam manufacturing technologies and the fundamental science behind foaming, present insights on the factors affecting foamability, cover ways of enhancing the foamability of various polymeric materials, with special focus on multi-phase systems, discuss the degradation of biodegradable foams and special morphology development for scaffolds, packaging, acoustic and super-insulation applications, as well as cell seeding studies in scaffolds. Each application has specific requirements in terms of desired properties. This in-depth coverage and analysis helps those looking to move forward with microcellular processing and polymer foaming. This is an ideal resource for researchers, advanced students and professionals interested in the microcellular processing of polymeric materials in the areas of polymer foaming, polymer processing, plastics engineering and materials science. Offers in-depth coverage of factors affecting foamability and methods for enhancing the foamability of polymeric materials Explores innovative applications in a range of areas, including scaffolds, acoustic applications, packaging and super-insulation Provides a comprehensive, critical overview of the state-of-the-art, possible future research directions, and opportunities for industrial application
Download or read book Polymeric Foams Structure Property Performance written by Bernard Obi and published by William Andrew. This book was released on 2017-12-07 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymeric Foams Structure–Property–Performance: A Design Guide is a response to the design challenges faced by engineers in a growing market with evolving standards, new regulations, and an ever-increasing variety of application types for polymeric foam. Bernard Obi, an author with wide experience in testing, characterizing, and applying polymer foams, approaches this emerging complexity with a practical design methodology that focuses on understanding the relationship between structure–properties of polymeric foams and their performance attributes. The book not only introduces the fundamentals of polymer and foam science and engineering, but also goes more in-depth, covering foam processing, properties, and uses for a variety of applications. By connecting the diverse technologies of polymer science to those from foam science, and by linking both micro- and macrostructure–property relationships to key performance attributes, the book gives engineers the information required to solve pressing design problems involving the use of polymeric foams and to optimize foam performance. With a focus on applications in the automotive and transportation industries, as well as uses of foams in structural composites for lightweight applications, the author provides numerous case studies and design examples of real-life industrial problems from various industries and their solutions. Provides the science and engineering fundamentals relevant for solving polymer foam application problems Offers an exceptionally practical methodology to tackle the increasing complexity of real-world design challenges faced by engineers working with foams Discusses numerous case studies and design examples, with a focus on automotive and transportation Utilizes a practical design methodology focused on understanding the relationship between structure-properties of polymeric foams and their performance attributes
Download or read book Polymer Processing with Supercritical Fluids written by Vannessa Goodship and published by iSmithers Rapra Publishing. This book was released on 2005 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: SCFs are currently the subjects of intense research and commercial interest. Applications such as the RESS (rapid expansion of supercritical fluid solutions) process are part of standard industrial practice. In view of their ever-growing importance in the polymer industry there is a need to fully comprehend how supercritical fluids interrelate with polymeric materials to realise the potential that can be gained from their use. The authors review the basic principles of SCFs and their application within the polymer industry: characteristics and properties, extraction of unwanted residual products, polymerisation solvents, and polymer impregnation. Processing applications such as plasticisation, foaming and blending are also considered. There is discussion of the potential within the polymer recycling industry for use of SCFs as cleaning agents or within supercritical oxidation processes. Around 400 references with abstracts from recent global literature accompany this review, sourced from the Polymer Library, to facilitate further reading. A subject index and a company index are included.
Download or read book Polyolefin Foams written by Nigel Mills and published by iSmithers Rapra Publishing. This book was released on 2003 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polyolefin Foams are a relatively recent development compared to the other types of foam. Topics covered in this review include: processing and the properties required for successful foam production, the molecular structures necessary, the mechanical and thermal properties and how these can be used to best advantage, markets and applications. The review is accompanied by around 400 abstracts from the Polymer Library database.
Download or read book Specialized Injection Molding Techniques written by Hans-Peter Heim and published by William Andrew. This book was released on 2015-11-02 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special Injection Molding Techniques covers several techniques used to create multicomponent products, hollow areas, and hard-soft combinations that cannot be produced with standard injection molding processes. It also includes information on the processing techniques of special materials, including foaming agents, bio-based materials, and thermosets. The book describes the most industrially relevant special injection molding techniques, with a detailed focus on understanding the basics of each technique and its main mechanisms, i.e., temperature, mold filling, bonding, residual stresses, and material behavior, also providing an explanation of process routes and their variants, and discussions of the most influencing process parameters. As special molding technologies have the potential to transform plastics processing to a highly-efficient, integrated type of manufacturing, this book provides a timely survey of these technologies, putting them into context, accentuating new opportunities, and giving relevant information on processing. Provides information about the basics needed for understanding several special injection molding techniques, including flow phenomena, bonding mechanisms, and thermal behavior Covers the basics of each technique and its main mechanisms, i.e., temperature, mold filling, bonding, residual stresses, and material behavior Discusses the most relevant processing parameters for each injection molding technique Presents a variety of techniques, including gas and water assisted injection molding, multi component injection molding, hybrid injection molding, injection molding of bio-based materials, and techniques for thermoset