Download or read book Controlled Polymerization and Polymeric Structures written by Akihiro Abe and published by Springer. This book was released on 2014-07-08 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Polymer Science enjoys a longstanding tradition and good reputation in its community. Each volume is dedicated to a current topic, and each review critically surveys one aspect of that topic, to place it within the context of the volume. The volumes typically summarize the significant developments of the last 5 to 10 years and discuss them critically, presenting selected examples, explaining and illustrating the important principles, and bringing together many important references of primary literature. On that basis, future research directions in the area can be discussed. Advances in Polymer Science volumes thus are important references for every polymer scientist, as well as for other scientists interested in polymer science - as an introduction to a neighboring field, or as a compilation of detailed information for the specialist.
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2008 with total page 946 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Directed Self assembly of Block Co polymers for Nano manufacturing written by Roel Gronheid and published by Woodhead Publishing. This book was released on 2015-07-17 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: The directed self-assembly (DSA) method of patterning for microelectronics uses polymer phase-separation to generate features of less than 20nm, with the positions of self-assembling materials externally guided into the desired pattern. Directed self-assembly of Block Co-polymers for Nano-manufacturing reviews the design, production, applications and future developments needed to facilitate the widescale adoption of this promising technology. Beginning with a solid overview of the physics and chemistry of block copolymer (BCP) materials, Part 1 covers the synthesis of new materials and new processing methods for DSA. Part 2 then goes on to outline the key modelling and characterization principles of DSA, reviewing templates and patterning using topographical and chemically modified surfaces, line edge roughness and dimensional control, x-ray scattering for characterization, and nanoscale driven assembly. Finally, Part 3 discusses application areas and related issues for DSA in nano-manufacturing, including for basic logic circuit design, the inverse DSA problem, design decomposition and the modelling and analysis of large scale, template self-assembly manufacturing techniques. - Authoritative outlining of theoretical principles and modeling techniques to give a thorough introdution to the topic - Discusses a broad range of practical applications for directed self-assembly in nano-manufacturing - Highlights the importance of this technology to both the present and future of nano-manufacturing by exploring its potential use in a range of fields
Download or read book Out of Equilibrium Supra molecular Systems and Materials written by Nicolas Giuseppone and published by John Wiley & Sons. This book was released on 2021-03-30 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: A must-have resource that covers everything from out-of-equilibrium chemical systems and materials to dissipative self-assemblies Out-of-Equilibrium Supramolecular Systems and Materials presents a comprehensive overview of the synthetic approaches that use supramolecular bonds in various out-of-thermodynamic equilibrium situations. With contributions from noted experts on the topic, the text contains information on the design of dissipative self-assemblies that maintain their structures when fueled by an external source of energy. The contributors also examine molecules and nanoscale objects and materials that can produce mechanical work based on molecular machines. Additionally, the book explores non-equilibrium supramolecular polymers that can be trapped in kinetically stable states, as well as out-of-equilibrium chemical systems and oscillators that are important to understand the emergence of complex behaviors and, in particular, the origin of life. This important book: Offers comprehensive coverage of fields from design of dissipative self-assemblies to non-equilibrium supramolecular polymers Presents information on a highly emerging and interdisciplinary topic Includes contributions from internationally renowned scientists Written for chemists, physical chemists, biochemists, material scientists, Out-of-Equilibrium Supramolecular Systems and Materials is an indispensable resource written by top scientists in the field.
Download or read book Self Assembly of Nano and Micro structured Materials Using Colloidal Engineering written by Dwaipayan Chakrabarti and published by Elsevier. This book was released on 2019-04-25 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: Self-assembly of Nano- and Micro-structured Materials Using Colloidal Engineering, Volume 12, covers the recent breakthroughs in the design and manufacture of functional colloids at the micro- and nanoscale level. In addition, it provides analyses on how these functionalities can be exploited to develop self-assembly pathways towards nano- and micro-structured materials. As we seek increasingly complex functions for colloidal superstructures, in silico design will play a critical role in guiding experimental fabrication by reducing the element of trial-and-error that would otherwise be involved. In addition to novel experimental approaches, recent developments in computational modelling are also presented, along with an overview of the arsenal of designing tools that are available to the modern materials scientist. - Focuses on promoting feedback between experiment, theory and computation in this cross-disciplinary research area - Shows how colloid science plays a crucial role in the bottom-up fabrication of nanostructured materials - Presents recent developments in computational modelling
Download or read book Liquid Dynamics written by John T. Fourkas and published by . This book was released on 2002 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: The dynamics of liquids play a major role in many chemical, physical, and biological processes. However, the strong intermolecular interactions and high degree of disorder that characterize liquids pose a significant challenge to developing a detailed understanding of this state of matter. The chapters of this book describe current research using state-of-the-art techniques in experiment, simulation, and theory to unravel the mysteries of liquid behavior. Sections of the book are devoted to microscopic dynamics, photochemistry, vibrational dynamics, water, metastable liquids, and confined liquids. The introduction includes a detailed background discussion of terminology, major problems, and leading approaches in the context of these different topic areas.
Download or read book Chemical Solution Synthesis for Materials Design and Thin Film Device Applications written by Soumen Das and published by Elsevier. This book was released on 2021-01-09 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Solution Synthesis for Materials Design and Thin Film Device Applications presents current research on wet chemical techniques for thin-film based devices. Sections cover the quality of thin films, types of common films used in devices, various thermodynamic properties, thin film patterning, device configuration and applications. As a whole, these topics create a roadmap for developing new materials and incorporating the results in device fabrication. This book is suitable for graduate, undergraduate, doctoral students, and researchers looking for quick guidance on material synthesis and device fabrication through wet chemical routes. - Provides the different wet chemical routes for materials synthesis, along with the most relevant thin film structured materials for device applications - Discusses patterning and solution processing of inorganic thin films, along with solvent-based processing techniques - Includes an overview of key processes and methods in thin film synthesis, processing and device fabrication, such as nucleation, lithography and solution processing
Download or read book Encyclopedia of Polymer Applications 3 Volume Set written by Munmaya Mishra and published by CRC Press. This book was released on 2018-12-17 with total page 2954 pages. Available in PDF, EPUB and Kindle. Book excerpt: Undoubtedly the applications of polymers are rapidly evolving. Technology is continually changing and quickly advancing as polymers are needed to solve a variety of day-to-day challenges leading to improvements in quality of life. The Encyclopedia of Polymer Applications presents state-of-the-art research and development on the applications of polymers. This groundbreaking work provides important overviews to help stimulate further advancements in all areas of polymers. This comprehensive multi-volume reference includes articles contributed from a diverse and global team of renowned researchers. It offers a broad-based perspective on a multitude of topics in a variety of applications, as well as detailed research information, figures, tables, illustrations, and references. The encyclopedia provides introductions, classifications, properties, selection, types, technologies, shelf-life, recycling, testing and applications for each of the entries where applicable. It features critical content for both novices and experts including, engineers, scientists (polymer scientists, materials scientists, biomedical engineers, macromolecular chemists), researchers, and students, as well as interested readers in academia, industry, and research institutions.
Download or read book American Doctoral Dissertations written by and published by . This book was released on 2002 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Soft Matter Characterization written by Redouane Borsali and published by Springer Science & Business Media. This book was released on 2008-07-28 with total page 1490 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 2-volume set includes extensive discussions of scattering techniques (light, neutron and X-ray) and related fluctuation and grating techniques that are at the forefront of this field. Most of the scattering techniques are Fourier space techniques. Recent advances have seen the development of powerful direct imaging methods such as atomic force microscopy and scanning probe microscopy. In addition, techniques that can be used to manipulate soft matter on the nanometer scale are also in rapid development. These include the scanning probe microscopy technique mentioned above as well as optical and magnetic tweezers.
Download or read book The Oxford Handbook of Soft Condensed Matter written by Eugene M. Terentjev and published by OUP Oxford. This book was released on 2015-02-26 with total page 605 pages. Available in PDF, EPUB and Kindle. Book excerpt: Soft condensed matter is a relatively new topic. Condensed matter has typically referred to more traditional liquids, which have a long history of study, or to solids, which have focused more commonly on hard materials, driven in large measure by the importance of structural materials or the metals and semiconductors which drove the rapid evolution of microelectronics. It is only relatively recently, over the past 20 to 30 years, that soft condensed matter has matured into its own identifiable field. However, the field is an amalgam of many subfields, and many of these have themselves much longer histories. This handbook serves as an overview of many of these topics. Because of the great breadth, it is impossible to include them all; nevertheless, the key subjects of soft condensed matter are represented here. Together, they form both an introduction and an overview of the field. Each topic, and its representing Chapter, could have been a full size book - in fact, there are a number of such books on many of the topics covered in the handbook. Our aim here was to give a current snapshot of the field, identify the key principles at play and the most prominent (and promising) ways of its further development, provide essential references for anyone to follow the subject, but not necessarily go into a lot of detail on each topic.
Download or read book Amphiphilic Block Copolymers written by P. Alexandridis and published by Elsevier. This book was released on 2000-10-18 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is the belief of the editors of this book that the recognition of block copolymers as being amphiphilic molecules and sharing common features with other well-studied amphiphiles will prove beneficial to both the surfactant and the polymer communities. An aim of this book is to bridge the two communities and cross-fertilise the different fields. To this end, leading researchers in the field of amphiphilic block copolymer self-assembly, some having a background in surfactant chemistry, and others with polymer physics roots, have agreed to join forces and contribute to this book.The book consists of four entities. The first part discusses theoretical considerations behind the block copolymer self-assembly in solution and in the melt. The second part provides case studies of self-assembly in different classes of block copolymers (e.g., polyethers, polyelectrolytes) and in different environments (e.g., in water, in non-aqueous solvents, or in the absence of solvents). The third part presents experimental tools, ranging from static (e.g., small angle neutron scattering) to dynamic (e.g., rheology), which can prove valuable in the characterization of block copolymer self-assemblies. The fourth part offers a sampling of current applications of block copolymers in, e.g., formulations, pharmaceutics, and separations, applications which are based on the unique self-assembly properties of block copolymers.
Download or read book Nanostructured Polymer Blends written by Sabu Thomas and published by William Andrew. This book was released on 2013-11-28 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over 30% of commercial polymers are blends or alloys or one kind or another. Nanostructured blends offer the scientist or plastics engineer a new range of possibilities with characteristics including thermodynamic stablility; the potential to improve material transparency, creep and solvent resistance; the potential to simultaneously increase tensile strength and ductility; superior rheological properties; and relatively low cost. Nanostructured Polymer Blends opens up immense structural possibilities via chemical and mechanical modifications that generate novel properties and functions and high-performance characteristics at a low cost. The emerging applications of these new materials cover a wide range of industry sectors, encompassing the coatings and adhesives industry, electronics, energy (photovoltaics), aerospace and medical devices (where polymer blends provide innovations in biocompatible materials). This book explains the science of nanostructure formation and the nature of interphase formations, demystifies the design of nanostructured blends to achieve specific properties, and introduces the applications for this important new class of nanomaterial. All the key topics related to recent advances in blends are covered: IPNs, phase morphologies, composites and nanocomposites, nanostructure formation, the chemistry and structure of additives, etc. - Introduces the science and technology of nanostructured polymer blends – and the procedures involved in melt blending and chemical blending to produce new materials with specific performance characteristics - Unlocks the potential of nanostructured polymer blends for applications across sectors, including electronics, energy/photovoltaics, aerospace/automotive, and medical devices (biocompatible polymers) - Explains the performance benefits in areas including rheological properties, thermodynamic stablility, material transparency, solvent resistance, etc.
Download or read book Foundations of Molecular Modeling and Simulation written by Edward J. Maginn and published by Springer Nature. This book was released on 2021-03-25 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This highly informative and carefully presented book comprises select proceedings of Foundation for Molecular Modelling and Simulation (FOMMS 2018). The contents are written by invited speakers centered on the theme Innovation for Complex Systems. It showcases new developments and applications of computational quantum chemistry, statistical mechanics, molecular simulation and theory, and continuum and engineering process simulation. This volume will serve as a useful reference to researchers, academicians and practitioners alike.
Download or read book Polymer and Polymer Hybrid Nanoparticles written by Stanislav Rangelov and published by CRC Press. This book was released on 2013-08-28 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymeric and hybrid nanoparticles have received increased scientific interest in terms of basic research as well as commercial applications, promising a variety of uses for nanostructures in fields including bionanotechnology and medicine. Condensing the relevant research into a comprehensive reference, Polymer and Polymer-Hybrid Nanoparticles: From Synthesis to Biomedical Applications covers an array of topics from synthetic procedures and macromolecular design to possible biomedical applications of nanoparticles and materials based on original and unique polymers. The book presents a well-rounded picture of objects ranging from simple polymeric micelles to complex hybrid polymer-based nanostructures, detailing synthetic procedures, techniques for characterization and analysis, properties, and behavior in selective solvents and dispersions. Each chapter contains background and introductory information, summarizing generalities on the nanosystems being discussed. The chapters also describe representative works of experts and provide in-depth, focused discussions. The authors present current knowledge on the following topics: Designed synthesis of functional polymers Construction of block copolymer micellar and nonmicellar self-assembled structures Construction of organic–organic hybrid nanosized particles Construction of organic–inorganic hybrid nanoparticles and nanoassemblies The final chapter addresses biological applications of polymeric nanoparticles, including delivery of low-molecular-weight drugs, macromolecular drugs, imaging and diagnostics, and photodynamic therapy. Summarizing important developments in the field, the authors condense relevant research into a comprehensive resource.
Download or read book Nanoparticle block Copolymer Self assembly written by Scott Charles Warren and published by . This book was released on 2007 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gyroid Optical Metamaterials written by James A. Dolan and published by Springer. This book was released on 2018-11-04 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis explores the fabrication of gyroid-forming block copolymer templates and the optical properties of the resulting gyroid optical metamaterials, significantly contributing to our understanding of both. It demonstrates solvent vapour annealing to improve the long-range order of the templates, and investigates the unique crystallisation behaviour of their semicrystalline block. Furthermore, it shows that gyroid optical metamaterials that exhibit only short-range order are optically equivalent to nanoporous gold, and that the anomalous linear dichroism of gyroid optical metamaterials with long-range order is the result of the surface termination of the bulk gyroid morphology. Optical metamaterials are artificially engineered materials that, by virtue of their structure rather than their chemistry, may exhibit various optical properties not otherwise encountered in nature (e.g. a negative refractive index). However, these structures must be significantly smaller than the wavelength of visible light and are therefore challenging to fabricate using traditional “top down” techniques. Instead, a “bottom up” approach can be used, whereby optical metamaterials are fabricated via templates created by the self-assembly of block-copolymers. One such morphology is the gyroid, a chiral, continuous and triply periodic cubic network found in a range of natural and synthetic self-assembled systems.
