Download or read book Blended Wing Body Bwb Boundary Layer Ingestion Bli Inlet Configuration and System Studies written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-24 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: A study was conducted to determine the potential reduction in fuel burned for BLI (boundary layer ingestion) inlets on a BWB (blended wing body) airplane employing AFC (active flow control). The BWB is a revolutionary type airplane configuration with engines on the aft upper surface where thick boundary layer offers the greatest opportunity for ram drag reduction. AFC is an emerging technology for boundary layer control. Several BLI inlet configurations were analyzed in the NASA-developed RANS Overflow CFD code. The study determined that, while large reductions in ram drag result from BLI, lower inlet pressure recovery produces engine performance penalties that largely offset this ram drag reduction. AFC could, however, enable a short BLI inlet that allows surface mounting of the engine which, when coupled with a short diffuser, would significantly reduce drag and weight for a potential 10% reduction in fuel burned. Continuing studies are therefore recommended to achieve this reduction in fuel burned considering the use of more modest amounts of BLI coupled with both AFC and PFC (Passive Flow Control) to produce a fail-operational system. Kawai, Ronald T. and Friedman, Douglas M. and Serrano, Leonel Langley Research Center NASA/CR-2006-214534
Download or read book Power Based Study of Boundary Layer Ingestion for Aircraft Application written by Peijian Lv and published by Springer Nature. This book was released on 2022-09-14 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents research on Boundary Layer Ingestion (BLI). BLI is an aircraft-engine integration technique that aims at integrating the aircraft and the propulsion system such that the overall aircraft fuel consumption can be reduced. In this research, theoretical analysis suggests that the minimization of total power consumption should be used as a design criterion for aircraft utilizing BLI rather than focusing on the minimization of drag. Numerical simulations are performed, and the simulation results are processed using the PBM to support the theoretical analysis. Furthermore, an experimental study is carried out with a focus on the power conversion processes involved for a propulsor operating in the wake. Stereoscopic PIV is employed in order to visualize the flow and understand the physics. The so-called Power-based Method is used to quantify the power conversion mechanisms. The results prove that the dominant mechanism responsible for the efficiency enhancement is due to the utilization of body wake energy by the wake ingesting propeller. In short, the importance of wake energy flow rate in understanding the BLI phenomenon is highlighted. This book will be useful for researchers in the field of aircraft propulsion, aircraft aerodynamics, and airframe propulsion integration.
Download or read book Green Aviation written by Ramesh Agarwal and published by John Wiley & Sons. This book was released on 2016-09-20 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: Green Aviation is the first authoritative overview of both engineering and operational measures to mitigate the environmental impact of aviation. It addresses the current status of measures to reduce the environmental impact of air travel. The chapters cover such items as: Engineering and technology-related subjects (aerodynamics, engines, fuels, structures, etc.), Operations (air traffic management and infrastructure) Policy and regulatory aspects regarding atmospheric and noise pollution. With contributions from leading experts, this volume is intended to be a valuable addition, and useful resource, for aerospace manufacturers and suppliers, governmental and industrial aerospace research establishments, airline and aviation industries, university engineering and science departments, and industry analysts, consultants, and researchers.
Download or read book AIAA Aerospace Sciences Meeting and Exhibit 42nd written by and published by . This book was released on 2004 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Distributed Propulsion Technology written by Amir S. Gohardani and published by Nova Science Publishers. This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distributed propulsion technology is one of the revolutionary candidates for future aircraft propulsion. In this book, which serves as the very first reference book on distributed propulsion technology, the potential role of distributed propulsion technology in future aviation is investigated. Following a historical journey that revisits distributed propulsion technology in unmanned air vehicles, commercial aircrafts, and military aircrafts, features of this specific technology are highlighted in synergy with an electric aircraft concept and a first-of-its-kind comparison between commercial and military aircrafts employing distributed propulsion arrangements. In light of propulsionairframe integration and complementary technologies, such as boundary layer ingestion, thrust vectoring and circulation control, transpired opportunities and challenges are addressed in addition to a number of identified research directions proposed for future aircrafts. Moreover, a diverse set of distributed propulsion arrangements are considered. These include: small engines, gas-driven multi-fan architectures, turboelectric systems featuring superconductive and non-superconducting electrical machine technology, and electromagnetic fans. This book features contributions by the National Aeronautics and Space Administration (NASA) and the United States Air Force (USAF), and includes the first proposed official definition for distributed propulsion technology in subsonic fixed wing aircrafts.
Download or read book Aerial Robots written by Omar D Lopez Mejia and published by BoD – Books on Demand. This book was released on 2017-09-06 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: Few years ago, the topic of aerial robots was exclusively related to the robotics community, so a great number of books about the dynamics and control of aerial robots and UAVs have been written. As the control technology for UAVs advances, the great interaction that exists between other systems and elements that are as important as control such as aerodynamics, energy efficiency, acoustics, structural integrity, and applications, among others has become evident. Aerial Robots - Aerodynamics, Control, and Applications is an attempt to bring some of these topics related to UAVs together in just one book and to look at a selection of the most relevant problems of UAVs in a broader engineering perspective.
Download or read book Journal of Aircraft written by and published by . This book was released on 2009 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Propulsion and Power written by Joachim Kurzke and published by Springer. This book was released on 2018-05-28 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is written for engineers and students who wish to address the preliminary design of gas turbine engines, as well as the associated performance calculations, in a practical manner. A basic knowledge of thermodynamics and turbomachinery is a prerequisite for understanding the concepts and ideas described. The book is also intended for teachers as a source of information for lecture materials and exercises for their students. It is extensively illustrated with examples and data from real engine cycles, all of which can be reproduced with GasTurb (TM). It discusses the practical application of thermodynamic, aerodynamic and mechanical principles. The authors describe the theoretical background of the simulation elements and the relevant correlations through which they are applied, however they refrain from detailed scientific derivations.
Download or read book The Proceedings of the 2021 Asia Pacific International Symposium on Aerospace Technology APISAT 2021 Volume 1 written by Sangchul Lee and published by Springer Nature. This book was released on 2022-08-30 with total page 1027 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceeding comprises peer-reviewed papers of the 2021 Asia-Pacific International Symposium on Aerospace Technology (APISAT 2021), held from 15-17 November 2021 in Jeju, South Korea. This book deals with various themes on computational fluid dynamics, wind tunnel testing, flow visualization, UAV design, flight simulation, satellite attitude control, aeroelasticity and control, combustion analysis, fuel injection, cooling systems, spacecraft propulsion and so forth. So, this book can be very helpful not only for the researchers of universities and academic institutes, but also for the industry engineers who are interested in the current and future advanced topics in aerospace technology.
Download or read book Internal Flow written by E. M. Greitzer and published by Cambridge University Press. This book was released on 2007-02-26 with total page 739 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the analysis and behaviour of internal flows encountered in propulsion systems, fluid machinery (compressors, turbines and pumps) and ducts (diffusers, nozzles and combustion chambers). The focus is on phenomena that are important in setting the performance of a broad range of fluid devices. The authors show that even for complex processes one can learn a great deal about the behaviour of such devices from a clear understanding and rigorous use of basic principles. Throughout the book they illustrate theoretical principles by reference to technological applications. The strong emphasis on fundamentals, however, means that the ideas presented can be applied beyond internal flow to other types of fluid motion. The book equips students and practising engineers with a range of new analytical tools. These tools offer enhanced interpretation and application of both experimental measurements and the computational procedures that characterize modern fluids engineering.
Download or read book Introduction to the Theory of Flow Machines written by Albert Betz and published by Elsevier. This book was released on 2014-05-16 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to the Theory of Flow Machines details the fundamental processes and the relations that have a significant influence in the operating mechanism of flow machines. The book first covers the general consideration in flow machines, such as pressure, stress, and cavitation. In the second chapter, the text deals with ducts; this chapter discusses the general remarks, types of flow, and mixing process. Next, the book tackles the types of cascades, along with its concerns. The closing chapter covers the flow machine and its components, such as turbine, wheels, engines, and propellers. The text will be of great use to mechanical engineers and technicians.
Download or read book Variational Analysis and Aerospace Engineering written by Giuseppe Buttazzo and published by Springer Science & Business Media. This book was released on 2009-08-21 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Variational Analysis and Aerospace Engineering conference held in Erice, Italy in September 2007 at International School of Mathematics, Guido Stampacchia provided a platform for aerospace engineers and mathematicians to discuss the problems requiring an extensive application of mathematics. This work contains papers presented at the workshop.
Download or read book Aviation Noise Impact Management written by Laurent Leylekian and published by Springer. This book was released on 2022-03-15 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book provides a view into the state-of-the-art research on aviation noise and related annoyance. The book will primarily focus on the achievements of the ANIMA project (Aviation Noise Impact Management through Novel Approaches), but not exclusively. The content has a broader theme in order to encompass. regulation issues, the ICAO (International Civil Aviation Organization) balanced approach, progresses made on technologies and reduction of noise at source, impact of possible future civil supersonic aircraft, land-use planning issues, as well as the core topics of the ANIMA project, i.e. impact on human beings, annoyance, quality of life, health and findings of the project in this respect. This book differs from traditional research programmes on aviation noise as the authors endeavour, not to lower noise at source, but to reduce the annoyance. This book examines these non-acoustic factors in an effort to help those most affected by aviation noise – communities living close to airports, and also help airport managers, policy-makers, local authorities and researchers to deal with this issue holistically. The book concludes with some recommendations for EU, national and local policy-makers, airport and aviation authorities, and more broadly a scientifically literate audience. These recommendations may help to identify gaps for progress in terms of research but also genuine implementation actions for political and regulatory authorities.
Download or read book Intake Aerodynamics written by J. Seddon and published by AIAA (American Institute of Aeronautics & Astronautics). This book was released on 1999 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Intake Aerodynamics, Second Edition" presents computational advancements and discoveries in intake aerodynamics. A companion volume to "Practical Intake Aerodynamic Design," this important text considers the problem of airflow, both internal and external to air intake, as applied to civil and military aircraft. It covers the aerodynamics of subsonic and supersonic intakes in real flows, maintaining a progression through the transonic range. Also considered is the joint perspective of the airframe designer and the propulsion specialist in practical cases. Readers will gain insight into the fluid mechanics behind the deceleration of air from free stream to engine velocity, and an understanding of air compression and external drag in extensively revised chapters reflecting progress in the field. More than 300 drawings and diagrams help to illustrate the points defined throughout the book. Copublished with Blackwell Science Ltd. Outside the United States and Canada, order from Blackwell Science Ltd., United Kingdom, tel 44 1865 206 206.
Download or read book Aerospace Mechatronics and Control Technology written by Huafeng Ding and published by Springer Nature. This book was released on 2022-01-20 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book collects chapters on Aerospace Mechatronics and Control Technology as selected contributions from the 7th Asia Conference on Mechanical Engineering and Aerospace Engineering (MEAE) in 2021. The book focuses on novel techniques for aviation infrastructure in aerospace mechatronics and avionics systems, mechanical engineering in aerospace, and mechanical design and control system domains. The contents make valuable contributions to academic researchers and engineers in the industry. The MEAE 2021 provides a forum to discuss the latest trends and advances in mechanical engineering and aerospace engineering and related fields, and foster the exchange of ideas and international collaboration in the field.
Download or read book How Mechanics Shaped the Modern World written by David Allen and published by Springer Science & Business Media. This book was released on 2013-09-24 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique book presents a nontechnical view of the history of mechanics, from the Big Bang to present day. The impact of mechanics on the evolution of a variety of subjects is vividly illustrated, including astronomy, geology, astrophysics, anthropology, archeology, ancient history, Renaissance art, music, meteorology, modern structural engineering, mathematics, medicine, warfare, and sports. While enormous in scope, the subject matter is covered (with ample photographic support) at a level designed to capture the interest of both the learned and the curious. The book concludes with a creative and thoughtful examination of the current state of mechanics and possibilities for the future of mechanics.
Download or read book Advanced Aircraft Design written by Egbert Torenbeek and published by John Wiley & Sons. This book was released on 2013-05-28 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the overall appearance of modern airliners has not changed a lot since the introduction of jetliners in the 1950s, their safety, efficiency and environmental friendliness have improved considerably. Main contributors to this have been gas turbine engine technology, advanced materials, computational aerodynamics, advanced structural analysis and on-board systems. Since aircraft design became a highly multidisciplinary activity, the development of multidisciplinary optimization (MDO) has become a popular new discipline. Despite this, the application of MDO during the conceptual design phase is not yet widespread. Advanced Aircraft Design: Conceptual Design, Analysis and Optimization of Subsonic Civil Airplanes presents a quasi-analytical optimization approach based on a concise set of sizing equations. Objectives are aerodynamic efficiency, mission fuel, empty weight and maximum takeoff weight. Independent design variables studied include design cruise altitude, wing area and span and thrust or power loading. Principal features of integrated concepts such as the blended wing and body and highly non-planar wings are also covered. The quasi-analytical approach enables designers to compare the results of high-fidelity MDO optimization with lower-fidelity methods which need far less computational effort. Another advantage to this approach is that it can provide answers to “what if” questions rapidly and with little computational cost. Key features: Presents a new fundamental vision on conceptual airplane design optimization Provides an overview of advanced technologies for propulsion and reducing aerodynamic drag Offers insight into the derivation of design sensitivity information Emphasizes design based on first principles Considers pros and cons of innovative configurations Reconsiders optimum cruise performance at transonic Mach numbers Advanced Aircraft Design: Conceptual Design, Analysis and Optimization of Subsonic Civil Airplanes advances understanding of the initial optimization of civil airplanes and is a must-have reference for aerospace engineering students, applied researchers, aircraft design engineers and analysts.
