Download or read book Bipolar Transistors for Use in Monolithic Bandgap References and Temperature Transducers written by Koert van der Lingen and published by . This book was released on 1996 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: Zusammenfassung niederländisch.
Download or read book Structured Electronic Design written by Arie van Staveren and published by Springer Science & Business Media. This book was released on 2006-04-18 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analog design still has, unfortunately, a flavor of art. Art can be beautiful. However, art in itself is difficult to teach to students and difficult to transfer from experienced analog designers to new trainee designers in companies. Structured Electronic Design: High-Performance Harmonic Oscillators and Bandgap References aims to systemize analog design. The use of orthogonalization of the design of the fundamental quality aspects (noise, distortion, and bandwidth) and hierarchy in the subsequent design steps, enables designers to achieve high-performance designs, in a relatively short time. As a result of the systematic design procedure, the effect of design decisions on the circuit performance is made clear. Additionally, the use of resources for reaching a specified performance is tracked. This book, therefore, describes the structured electronic design of high-performance harmonic oscillators and bandgap references. The structured design of harmonic oscillators includes the maximization of the carrier-to- noise ratio by means of tapping, i.e. an impedance adaption method for noise matching. The bandgap reference, a popular implementation of a voltage reference, is studied via the unusual concept of the linear combination of base-emitter voltages. The presented method leads to the design of high-performance references in CMOS and Bipolar technology. Using this concept, on a high level of abstraction the quality with respect to, for instance, noise and power-supply rejection can be identified. In this book, it is shown with several design examples that this method provides an excellent starting point for the design of high-performance bandgap references. Auxiliary to the harmonic-oscillator and bandgap reference design are the negative- feedback amplifiers. In this book the systematic design of the dynamic behavior is emphasized. By means of the identification of the dominant poles, it is possible to give an upper limit of the attainable bandwidth, even before the real frequency compensation is accomplished. Structured Electronic Design: High-Performance Harmonic Oscillators and Bandgap References is a valuable book for researchers and designers, as well as students in the field of analog design. It helps both the experienced and trainee designer to come to grips with the design of analog circuits. The presented method is illustrated by several well- described design examples.
Download or read book The Piezojunction Effect in Silicon Integrated Circuits and Sensors written by Fabiano Fruett and published by Springer Science & Business Media. This book was released on 2006-04-18 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes techniques that can reduce mechanical-stress-induced inaccuracy and long-term instability in chips. The authors also show that the piezojunction effect can be applied for new types of mechanical-sensor structures. Thermo-mechanical stress is induced when packaged chips cool down to the temperature of application.
Download or read book Precision Temperature Sensors in CMOS Technology written by Micheal A.P. Pertijs and published by Springer Science & Business Media. This book was released on 2006-12-06 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the analysis and design of precision temperature sensors in CMOS IC technology, focusing on so-called smart temperature sensors, which provide a digital output signal that can be readily interpreted by a computer. The text shows how temperature characteristics can be used to obtain an accurate digital temperature reading. The book ends with a detailed description of three prototypes, one of which achieves the best performance reported to date.
Download or read book Thermal Sensors written by Gerard C. M. Meijer and published by CRC Press. This book was released on 1994-10-27 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Sensors is intended as a comprehensive and accessible reference for designers and users of thermal sensors. Many different physical quantities can be converted easily and accurately into temperature differences using thermal techniques. These temperature differences can be detected with temperature and temperature-difference sensors. In a thermal sensor the thermal converter and the temperature sensor are combined in a single accurate device. This book gives an overview and deals with the design aspects of thermal and temperature sensors, with an emphasis on sensors based on silicon technology. The temperature sensors described are based on the use of various types of sensitive elements, such as platinum resistors, thermistors and special integrated circuits. The thermal sensors described include flow, conductivity, infrared, vacuum, humidity and calorimetric sensors, and ac-dc converters, thus providing a comprehensive overview of all thermal sensors, with practical examples of each type.
Download or read book Structured Electronic Design of High performance Low voltage Low power References written by Arie van Staveren and published by . This book was released on 1997 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Integrated Chemical Microsensor Systems in CMOS Technology written by Andreas Hierlemann and published by Springer Science & Business Media. This book was released on 2005-02-21 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, "Integrated Chemical Microsensor Systems in CMOS Technology", provides a comprehensive treatment of the highly interdisciplinary field of CMOS chemical microsensor systems. It is targeted at students, scientists and engineers who are interested in gaining an introduction to the field of chemical sensing since all the necessary fundamental knowledge is included. However, as it provides detailed information on all important issues related to the realization of chemical microsensors in CMOS technology, it also addresses experts well familiar with the field. After a brief introduction, the fundamentals of chemical sensing are presented. Fabrication and processing steps that are commonly used in the semiconductor industry are then detailed followed by a short description of the microfabrication techniques, and of the CMOS substrate and materials. Thereafter, a comprehensive overview of semiconductor-based and CMOS-based transducer structures for chemical sensors is given. CMOS-technology is then introduced as platform technology, which enables the integration of these microtransducers with the necessary driving and signal conditioning circuitry on the same chip. In a next section, the development of monolithic multisensor arrays and fully developed microsystems with on-chip sensor control and standard interfaces is described. A short section on packaging shows that techniques from the semiconductor industry can be applied to chemical microsensor packaging. The book concludes with a brief outlook on future developments, such as the realization of more complex integrated microsensor systems and methods to interface biological materials, such as cells, with CMOS microelectronics.
Download or read book Current Sources and Voltage References written by Linden T. Harrison and published by Elsevier. This book was released on 2005-08-22 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current Sources and Voltage References provides fixed, well-regulated levels of current or voltage within a circuit. These are two of the most important "building blocks " of analog circuits, and are typically used in creating most analog IC designs. Part 1 shows the reader how current sources are created, how they can be optimized, and how they can be utilized by the OEM circuit designer. The book serves as a "must-have reference for the successful development of precision circuit applications. It shows practical examples using either BJTs, FETs, precision op amps, or even matched CMOS arrays being used to create highly accurate current source designs, ranging from nanoAmps to Amps. In each chapter the most important characteristics of the particular semiconductor type being studied are carefully reviewed. This not only serves as a helpful refresher for experienced engineers, but also as a good foundation for all EE student coursework, and includes device models and relevant equations.Part 2 focuses on semiconductor voltage references, from their design to their various practical enhancements. It ranges from the simple Zener diode to today's most advanced topologies, including Analog Devices' XFET® and Intersil's FGATM (invented while this book was being written). Over 300 applications and circuit diagrams are shown throughout this easy-to-read, practical reference book.* Discusses how to design low-noise, precision current sources using matched transistor pairs.* Explains the design of high power current sources with power MOSFETs* Gives proven techniques to reduce drift and improve accuracy in voltage references.
Download or read book 1984 IEEE International Symposium on Circuits and Systems Proceedings written by and published by . This book was released on 1984 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings written by and published by . This book was released on 1984 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sensor Technology and Devices written by Ljubiša Ristić and published by Artech House Publishers. This book was released on 1994 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: "A results-oriented book. Quality line drawings, lucid photography, and informative graphs are used generously... The theoretical rigor of each chapter amply supports the real-world design examples that follow". -- Sensors Magazine "One of the few sources to offer such comprehensive coverage". -- IEEE Electrical Insulation
Download or read book Sensors Update 11 written by Henry Baltes and published by Wiley-VCH. This book was released on 2003 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sensors Update ensures that you stay at the cutting edge of the field, presenting the current highlights of sensor and related microelectromechanical systems technology. Coverage includes most recent developments in materials, design, production, and applications of sensors, signal detection and processing, as well as new sensing principles based on micro- and nanotechnology. Each volume is divided into three sections: Sensor Technology reviews highlights in applied and basic research, Sensor Applications covers new or improved applications of sensors and Sensor Markets provides a survey of suppliers and market trends for a particular area. With this unique combination of information in each volume, Sensors Update is of must-have value for scientists and engineers in industry and at universities, to sensors developers, distributors, and users.
Download or read book CMOS Voltage References written by Chi-Wah Kok and published by John Wiley & Sons. This book was released on 2012-12-19 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical overview of CMOS circuit design, this book covers the technology, analysis, and design techniques of voltage reference circuits. The design requirements covered follow modern CMOS processes, with an emphasis on low power, low voltage, and low temperature coefficient voltage reference design. Dedicating a chapter to each stage of the design process, the authors have organized the content to give readers the tools they need to implement the technologies themselves. Readers will gain an understanding of device characteristics, the practical considerations behind circuit topology, and potential problems with each type of circuit. Many design examples are used throughout, most of which have been tested with silicon implementation or employed in real-world products. This ensures that the material presented relevant to both students studying the topic as well as readers requiring a practical viewpoint. Covers CMOS voltage reference circuit design, from the basics through to advanced topics Provides an overview of basic device physics and different building blocks of voltage reference designs Features real-world examples based on actual silicon implementation Includes analytical exercises, simulation exercises, and silicon layout exercises, giving readers guidance and design layout experience for voltage reference circuits Solution manual available to instructors from the book’s companion website This book is highly useful for graduate students in VLSI design, as well as practicing analog engineers and IC design professionals. Advanced undergraduates preparing for further study in VLSI will also find this book a helpful companion text.
Download or read book Index to IEEE Publications written by Institute of Electrical and Electronics Engineers and published by . This book was released on 1990 with total page 848 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues for 1973- cover the entire IEEE technical literature.
Download or read book Sensors and Actuators written by S. Middelhoek and published by . This book was released on 1987 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wide Energy Bandgap Electronic Devices written by Fan Ren and published by World Scientific. This book was released on 2003 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents state-of-the-art GaN and SiC electronic devices, as well as detailed applications of these devices to power conditioning, r. f. base station infrastructure and high temperature electronics.
Download or read book Proceedings of the Technical Conference written by and published by . This book was released on 1987 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt:
