Download or read book Advanced Instrumentation Data Interpretation and Control of Biotechnological Processes written by J.F. van Impe and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the outgrowth of the COMETT II Course on Advanced Instru mentation, Data Interpretation, and Control of Biotechnological Processes organized by the Katholieke Universiteit Leuven and the Universiteit Gent, and held at Gent, Belgium, October 1994. The editors of the present volume were very fortunate to find all invited speakers prepared to write state-of-the-art expositions based on their lec tures. Special thanks are due to all of them. The result is an account of recent advances in instrumentation, data interpretation, and model based op timization and control of bioprocesses. For anyone interested in this emerg ing field, this text is of value and provides comprehensive reviews as well as new and important trends and directions for the future, motivated and illustrated by a wealth of applications. The typesetting of all this material represented a tremendous amount of work. I am most grateful to my wife, Myriam Uyttendaele, and to Kurt Gheys, who did most of the proof-reading. Their efforts have increased a lot the uniformity in style and presentation of the different manuscripts. Many thanks also to the co-editors, for their continued support. Kluwer Academic Publishers is gratefully acknowledged for publishing this book, thus contributing to the transfer of the latest research results into large scale industrial applications.

Download or read book Modelling and Adaptive Control of Biotechnological Processes written by Marie-France Weirig and published by . This book was released on 1998 with total page 113 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modelling And Control of Biotechnological Process written by Johnson A [Ed.] and published by . This book was released on 1974 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Computer Applications in Fermentation Technology Modelling and Control of Biotechnological Processes written by N. M. Fish and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: Richard Fox Chairman, Scientific Programme Committee Between 25th and 29th September, 1988, 243 people who either apply or research the use of computers in fermentation gathered together at Robinson College, Cambridge, UK. They came from 30 countries. The conference brought together two traditions. Firstly, it continued the series on Computer Applications in Fermentation Technology (ICCAFT) inaugurated by Henri Blanchere in Dijon in 1973 and carried forward in Philadelphia and Manchester. Secondly, it brought the expertise of the many members of the International Federation of Automatic Control (IFAC), who focused their attention on biotechnology at Noordwijkerhout in the Netherlands in December, 1985. I am happy to say that the tradition carries on and a successor meeting will hopefully take place in the USA in 1991. If you find these proceedings useful or stimulating, then we hope to see you there. We set out to make ICCAFT4 a close-knit friendly conference. We housed all who cared to in Robinson College itself and organised no parallel sessions. Because we, the organisers, experience difficulty with the jargon of our colleagues from other disciplines, we asked Bruce Beck to present a breakfast tutorial on modern control and modelling techniques, and we set up informal panel discussions after dinner on two evenings. Neville Fish chaired a forum on the microbiological principles behind models, while Professors Derek Linkens and Ron Leigh led a discussion on expert systems in control.

Download or read book Modelling and Control of Biotechnological Processes written by A. Johnson and published by Elsevier. This book was released on 2014-05-17 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modelling and Control of Biotechnological Processes contains the proceedings of the International Federation of Automatic Control's First Symposium on Modeling and Control of Biotechnological Processes held in Noordwijkerhout, The Netherlands, on December 11-13, 1985. The papers explore modeling and control of biotechnological processes such as fermentation and biological wastewater treatment. This book consists of 37 chapters divided into 11 sections and begins with a discussion on the control of fermentation processes; modeling of biotechnical processes; and application of measurement and estimation techniques to biotechnology. The following sections focus on adaptive control theory, applications of adaptive control, and control and modeling of bioreactors. The reader is also introduced to measurement techniques and sensors, with emphasis on pyrolysis mass spectrometry; rapid bioelectrochemical methods; and a self-tuning controller for multiloop controlled fed-batch fermentation. The remaining sections deal with parameter identification and estimation; Kalman filtering techniques; optimization of production processes; modeling of microkinetics; and optimization theory. This monograph will be of interest to researchers and practitioners in the field of biotechnology.

Download or read book Measurement and Control of Chemical Food and Biotechnological Processes written by Karel Kadlec and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Computer Control of Fermentation Processes written by Daniel R. Omstead and published by CRC Press. This book was released on 2020-11-25 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this volume is to describe the components, assembly, and implementation of computer-based process control systems. Presented in two sections, it illustrates how such systems have been used to monitor and control industrial fermentation processes as a means to improve our understanding of product biosynthesis. This book covers the fields of indirect parameter estimation and fermentation-specific control algorithms. It also includes chapters which describe system architecture and process application, process control, on-line liquid sampling and computer system architecture. This is an ideal source for anyone involved with biotechnology, bioengineering, microbial technology, chemical engineering, and computer control.

Download or read book Process Monitoring and Quality by Design for Biotechnology Products written by Neslihan Delacruz and published by Morgan & Claypool Publishers. This book was released on 2010-12-31 with total page 39 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traditional pharmaceutical development is an unwieldy process requiring extensive experimentation and long lead times before process scientists can fully understand the effect that process parameters such as pH, temperature, cell viability, or process yield may have on the product acceptability. Implementation of quality by design is a science-based approach that allows the operating ranges and the acceptance criteria to be established based on the impact on product quality attributes. During manufacturing, process monitoring becomes part of a continuous verification effort and statistical control limits can be used to signal potential trends or drifts in the process. Single manufacturing batches that are aberrant are readily identified. The melding of scientific understanding, information systems architecture, instrumentation, software, and personnel training provides a large return on investment by ensuring that the manufacturing process produces a consistent pharmaceutical product that meets acceptable release standards for human use.

Download or read book Industrialization of Biology written by National Research Council and published by National Academies Press. This book was released on 2015-06-29 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: The tremendous progress in biology over the last half century - from Watson and Crick's elucidation of the structure of DNA to today's astonishing, rapid progress in the field of synthetic biology - has positioned us for significant innovation in chemical production. New bio-based chemicals, improved public health through improved drugs and diagnostics, and biofuels that reduce our dependency on oil are all results of research and innovation in the biological sciences. In the past decade, we have witnessed major advances made possible by biotechnology in areas such as rapid, low-cost DNA sequencing, metabolic engineering, and high-throughput screening. The manufacturing of chemicals using biological synthesis and engineering could expand even faster. A proactive strategy - implemented through the development of a technical roadmap similar to those that enabled sustained growth in the semiconductor industry and our explorations of space - is needed if we are to realize the widespread benefits of accelerating the industrialization of biology. Industrialization of Biology presents such a roadmap to achieve key technical milestones for chemical manufacturing through biological routes. This report examines the technical, economic, and societal factors that limit the adoption of bioprocessing in the chemical industry today and which, if surmounted, would markedly accelerate the advanced manufacturing of chemicals via industrial biotechnology. Working at the interface of synthetic chemistry, metabolic engineering, molecular biology, and synthetic biology, Industrialization of Biology identifies key technical goals for next-generation chemical manufacturing, then identifies the gaps in knowledge, tools, techniques, and systems required to meet those goals, and targets and timelines for achieving them. This report also considers the skills necessary to accomplish the roadmap goals, and what training opportunities are required to produce the cadre of skilled scientists and engineers needed.

Download or read book Control in Bioprocessing written by Pablo A. López Pérez and published by John Wiley & Sons. This book was released on 2020-03-10 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Closes the gap between bioscience and mathematics-based process engineering This book presents the most commonly employed approaches in the control of bioprocesses. It discusses the role that control theory plays in understanding the mechanisms of cellular and metabolic processes, and presents key results in various fields such as dynamic modeling, dynamic properties of bioprocess models, software sensors designed for the online estimation of parameters and state variables, and control and supervision of bioprocesses Control in Bioengineering and Bioprocessing: Modeling, Estimation and the Use of Sensors is divided into three sections. Part I, Mathematical preliminaries and overview of the control and monitoring of bioprocess, provides a general overview of the control and monitoring of bioprocesses, and introduces the mathematical framework necessary for the analysis and characterization of bioprocess dynamics. Part II, Observability and control concepts, presents the observability concepts which form the basis of design online estimation algorithms (software sensor) for bioprocesses, and reviews controllability of these concepts, including automatic feedback control systems. Part III, Software sensors and observer-based control schemes for bioprocesses, features six application cases including dynamic behavior of 3-dimensional continuous bioreactors; observability analysis applied to 2D and 3D bioreactors with inhibitory and non-inhibitory models; and regulation of a continuously stirred bioreactor via modeling error compensation. Applicable across all areas of bioprocess engineering, including food and beverages, biofuels and renewable energy, pharmaceuticals and nutraceuticals, fermentation systems, product separation technologies, wastewater and solid-waste treatment technology, and bioremediation Provides a clear explanation of the mass-balance–based mathematical modelling of bioprocesses and the main tools for its dynamic analysis Offers industry-based applications on: myco-diesel for implementing "quality" of observability; developing a virtual sensor based on the Just-In-Time Model to monitor biological control systems; and virtual sensor design for state estimation in a photocatalytic bioreactor for hydrogen production Control in Bioengineering and Bioprocessing is intended as a foundational text for graduate level students in bioengineering, as well as a reference text for researchers, engineers, and other practitioners interested in the field of estimation and control of bioprocesses.

Download or read book Biochemical Engineering and Biotechnology written by Ghasem Najafpour and published by Elsevier. This book was released on 2015-02-24 with total page 669 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biochemical Engineering and Biotechnology, 2nd Edition, outlines the principles of biochemical processes and explains their use in the manufacturing of every day products. The author uses a diirect approach that should be very useful for students in following the concepts and practical applications. This book is unique in having many solved problems, case studies, examples and demonstrations of detailed experiments, with simple design equations and required calculations. Covers major concepts of biochemical engineering and biotechnology, including applications in bioprocesses, fermentation technologies, enzymatic processes, and membrane separations, amongst others Accessible to chemical engineering students who need to both learn, and apply, biological knowledge in engineering principals Includes solved problems, examples, and demonstrations of detailed experiments with simple design equations and all required calculations Offers many graphs that present actual experimental data, figures, and tables, along with explanations

Download or read book Modelling and Control of Biotechnological Processes written by A. Johnson and published by . This book was released on 1986 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Application of Statistical Process Control in the Pharmaceutical and Biotechnology Industries written by T Cochrane and published by Elsevier. This book was released on 2029-01-01 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovative new technology now allows the measurement and collection of data throughout many manufacturing processes previously unavailable. The The Application of Statistical Process Control in the Pharmaceutical and Biotechnology Industries is a starting point for anyone who has been tasked to use technology to measure and collect data to gain an understanding of their processes in order to improve and control lengthy, complex supply chains in the pharmaceutical industry. It is a practical guide on how to apply statistical process control (SPC) within the pharmaceutical industry. It encourages all those involved in the industry - whether it be production, quality or the regulatory bodies - to start assessing data in a different way. This book delivers a way of viewing data that is both simple and easy to understand and relates to our understanding of the world in which we work. The first book to describe SPC in the pharmaceutical and biotechnology industries Highly practical approach Contains many case studies showing the application of SPC

Download or read book Computational Intelligence Techniques for Bioprocess Modelling Supervision and Control written by Maria Carmo Nicoletti and published by Springer. This book was released on 2009-07-09 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Intelligence (CI) and Bioprocess are well-established research areas which have much to offer each other. Under the perspective of the CI area, Biop- cess can be considered a vast application area with a growing number of complex and challenging tasks to be dealt with, whose solutions can contribute to boosting the development of new intelligent techniques as well as to help the refinement and s- cialization of many of the already existing techniques. Under the perspective of the Bioprocess area, CI can be considered a useful repertoire of theories, methods and techniques that can contribute and offer interesting alternative approaches for solving many of its problems, particularly those hard to solve using conventional techniques. Although throughout the past years CI and Bioprocess areas have accumulated substantial specific knowledge and progress has been quick and with a high degree of success, we believe there is still a long way to go in order to use the potentialities of the available CI techniques and knowledge at their full extent, as tools for supporting problem solving in bioprocesses. One of the reasons is the fact that both areas have progressed steadily and have been continuously accumulating and refining specific knowledge; another reason is the high level of technical expertise demanded by each of them. The acquisition of technical skills, experience and good insights in either of the two areas is very demanding and a hard task to be accomplished by any professional.

Download or read book Bioprocess Engineering Principles written by Pauline M. Doran and published by Elsevier. This book was released on 1995-04-03 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: The emergence and refinement of techniques in molecular biology has changed our perceptions of medicine, agriculture and environmental management. Scientific breakthroughs in gene expression, protein engineering and cell fusion are being translated by a strengthening biotechnology industry into revolutionary new products and services. Many a student has been enticed by the promise of biotechnology and the excitement of being near the cutting edge of scientific advancement. However, graduates trained in molecular biology and cell manipulation soon realise that these techniques are only part of the picture. Reaping the full benefits of biotechnology requires manufacturing capability involving the large-scale processing of biological material. Increasingly, biotechnologists are being employed by companies to work in co-operation with chemical engineers to achieve pragmatic commercial goals. For many years aspects of biochemistry and molecular genetics have been included in chemical engineering curricula, yet there has been little attempt until recently to teach aspects of engineering applicable to process design to biotechnologists. This textbook is the first to present the principles of bioprocess engineering in a way that is accessible to biological scientists. Other texts on bioprocess engineering currently available assume that the reader already has engineering training. On the other hand, chemical engineering textbooks do not consider examples from bioprocessing, and are written almost exclusively with the petroleum and chemical industries in mind. This publication explains process analysis from an engineering point of view, but refers exclusively to the treatment of biological systems. Over 170 problems and worked examples encompass a wide range of applications, including recombinant cells, plant and animal cell cultures, immobilised catalysts as well as traditional fermentation systems. * * First book to present the principles of bioprocess engineering in a way that is accessible to biological scientists * Explains process analysis from an engineering point of view, but uses worked examples relating to biological systems * Comprehensive, single-authored * 170 problems and worked examples encompass a wide range of applications, involving recombinant plant and animal cell cultures, immobilized catalysts, and traditional fermentation systems * 13 chapters, organized according to engineering sub-disciplines, are groupled in four sections - Introduction, Material and Energy Balances, Physical Processes, and Reactions and Reactors * Each chapter includes a set of problems and exercises for the student, key references, and a list of suggestions for further reading * Includes useful appendices, detailing conversion factors, physical and chemical property data, steam tables, mathematical rules, and a list of symbols used * Suitable for course adoption - follows closely curricula used on most bioprocessing and process biotechnology courses at senior undergraduate and graduate levels.

Download or read book Current Developments in Biotechnology and Bioengineering written by Christian Larroche and published by Elsevier. This book was released on 2016-09-17 with total page 852 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current Developments in Biotechnology and Bioengineering: Bioprocesses, Bioreactors and Controls provides extensive coverage of new developments, state-of-the-art technologies, and potential future trends, reviewing industrial biotechnology and bioengineering practices that facilitate and enhance the transition of processes from lab to plant scale, which is becoming increasingly important as such transitions continue to grow in frequency. Focusing on industrial bioprocesses, bioreactors for bioprocesses, and controls for bioprocesses, this title reviews industrial practice to identify bottlenecks and propose solutions, highlighting that the optimal control of a bioprocess involves not only maximization of product yield, but also taking into account parameters such as quality assurance and environmental aspects. Describes industrial bioprocesses based on the reaction media Lists the type of bioreactors used for a specific bioprocess/application Outlines the principles of control systems in various bioprocesses

Download or read book Genetic Engineering and Calorespirometric Process Control for Biotechnological Bulk Cemical Production from Methanol written by Maria-Teresa Rohde and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: