Download or read book Biostatistics and Computer based Analysis of Health Data using R written by Christophe Lalanne and published by Elsevier. This book was released on 2016-07-13 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biostatistics and Computer-Based Analysis of Health Data Using the R Software addresses the concept that many of the actions performed by statistical software comes back to the handling, manipulation, or even transformation of digital data. It is therefore of primary importance to understand how statistical data is displayed and how it can be exploited by software such as R. In this book, the authors explore basic and variable commands, sample comparisons, analysis of variance, epidemiological studies, and censored data. With proposed applications and examples of commands following each chapter, this book allows readers to apply advanced statistical concepts to their own data and software. - Features useful commands for describing a data table composed made up of quantitative and qualitative variables - Includes measures of association encountered in epidemiological studies, odds ratio, relative risk, and prevalence - Presents an analysis of censored data, the key main tests associated with the construction of a survival curve (log-rank test or Wilcoxon), and the Cox regression model

Download or read book Biostatistics and Computer based Analysis of Health Data using Stata written by Christophe Lalanne and published by Elsevier. This book was released on 2016-09-06 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of the Biostatistics and Health Sciences Set focuses on statistics applied to clinical research. The use of Stata for data management and statistical modeling is illustrated using various examples. Many aspects of data processing and statistical analysis of cross-sectional and experimental medical data are covered, including regression models commonly found in medical statistics. This practical book is primarily intended for health researchers with basic knowledge of statistical methodology. Assuming basic concepts, the authors focus on the practice of biostatistical methods essential to clinical research, epidemiology and analysis of biomedical data (including comparison of two groups, analysis of categorical data, ANOVA, linear and logistic regression, and survival analysis). The use of examples from clinical trials and epideomological studies provide the basis for a series of practical exercises, which provide instruction and familiarize the reader with essential Stata packages and commands. - Provides detailed examples of the use of Stata for common biostatistical tasks in medical research - Features a work program structured around the four previous chapters and a series of practical exercises with commented corrections - Includes an appendix to help the reader familiarize themselves with additional packages and commands - Focuses on the practice of biostatistical methods that are essential to clinical research, epidemiology, and analysis of biomedical data

Download or read book Biostatistics and Computer based Analysis of Health Data Using SAS written by Christophe Lalanne and published by Elsevier. This book was released on 2017-06-22 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of the Biostatistics and Health Sciences Set focuses on statistics applied to clinical research.The use of SAS for data management and statistical modeling is illustrated using various examples. Many aspects of data processing and statistical analysis of cross-sectional and experimental medical data are covered, including regression models commonly found in medical statistics. This practical book is primarily intended for health researchers with a basic knowledge of statistical methodology. Assuming basic concepts, the authors focus on the practice of biostatistical methods essential to clinical research, epidemiology and analysis of biomedical data (including comparison of two groups, analysis of categorical data, ANOVA, linear and logistic regression, and survival analysis). The use of examples from clinical trials and epidemiological studies provide the basis for a series of practical exercises, which provide instruction and familiarize the reader with essential SAS commands. - Presents the use of SAS software in the statistical approach for the management of data modeling - Includes elements of the language and descriptive statistics - Supplies measures of association, comparison of means, and proportions for two or more samples - Explores linear and logistic regression - Provides survival data analysis

Download or read book Biostatistics for Epidemiology and Public Health Using R written by Bertram K.C. Chan, PhD and published by Springer Publishing Company. This book was released on 2015-11-05 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since it first appeared in 1996, the open-source programming language R has become increasingly popular as an environment for statistical analysis and graphical output. In addition to being freely available, R offers several advantages for biostatistics, including strong graphics capabilities, the ability to write customized functions, and its extensibility. This is the first textbook to present classical biostatistical analysis for epidemiology and related public health sciences to students using the R language. Based on the assumption that readers have minimal familiarity with statistical concepts, the author uses a step-bystep approach to building skills. The text encompasses biostatistics from basic descriptive and quantitative statistics to survival analysis and missing data analysis in epidemiology. Illustrative examples, including real-life research problems and exercises drawn from such areas as nutrition, environmental health, and behavioral health, engage students and reinforce the understanding of R. These examples illustrate the replication of R for biostatistical calculations and graphical display of results. The text covers both essential and advanced techniques and applications in biostatistics that are relevant to epidemiology. This text is supplemented with teaching resources, including an online guide for students in solving exercises and an instructor's manual. KEY FEATURES: First overview biostatistics textbook for epidemiology and public health that uses the open-source R program Covers essential and advanced techniques and applications in biostatistics as relevant to epidemiology Features abundant examples and exercises to illustrate the application of R language for biostatistical calculations and graphical displays of results Includes online student solutions guide and instructor's manual

Download or read book Analysis in Nutrition Research written by George Pounis and published by Academic Press. This book was released on 2018-10-19 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis in Nutrition Research: Principles of Statistical Methodology and Interpretation of the Results describes, in a comprehensive manner, the methodologies of quantitative analysis of data originating specifically from nutrition studies. The book summarizes various study designs in nutrition research, research hypotheses, the proper management of dietary data, and analytical methodologies, with a specific focus on how to interpret the results of any given study. In addition, it provides a comprehensive overview of the methodologies used in study design and the management and analysis of collected data, paying particular attention to all of the available, modern methodologies and techniques. Users will find an overview of the recent challenges and debates in the field of nutrition research that will define major research hypotheses for research in the next ten years. Nutrition scientists, researchers and undergraduate and postgraduate students will benefit from this thorough publication on the topic. - Provides a comprehensive presentation of the various study designs applied in nutrition research - Contains a parallel description of statistical methodologies used for each study design - Presents data management methodologies used specifically in nutrition research - Describes methodologies using both a theoretical and applied approach - Illustrates modern techniques in dietary pattern analysis - Summarizes current topics in the field of nutrition research that will define major research hypotheses for research in the next ten years

Download or read book R for Health Data Science written by Ewen Harrison and published by CRC Press. This book was released on 2020-12-31 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this age of information, the manipulation, analysis, and interpretation of data have become a fundamental part of professional life; nowhere more so than in the delivery of healthcare. From the understanding of disease and the development of new treatments, to the diagnosis and management of individual patients, the use of data and technology is now an integral part of the business of healthcare. Those working in healthcare interact daily with data, often without realising it. The conversion of this avalanche of information to useful knowledge is essential for high-quality patient care. R for Health Data Science includes everything a healthcare professional needs to go from R novice to R guru. By the end of this book, you will be taking a sophisticated approach to health data science with beautiful visualisations, elegant tables, and nuanced analyses. Features Provides an introduction to the fundamentals of R for healthcare professionals Highlights the most popular statistical approaches to health data science Written to be as accessible as possible with minimal mathematics Emphasises the importance of truly understanding the underlying data through the use of plots Includes numerous examples that can be adapted for your own data Helps you create publishable documents and collaborate across teams With this book, you are in safe hands – Prof. Harrison is a clinician and Dr. Pius is a data scientist, bringing 25 years’ combined experience of using R at the coal face. This content has been taught to hundreds of individuals from a variety of backgrounds, from rank beginners to experts moving to R from other platforms.

Download or read book Biostatistical Design and Analysis Using R written by Dr Murray Logan and published by John Wiley & Sons. This book was released on 2011-09-20 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: R — the statistical and graphical environment is rapidly emerging as an important set of teaching and research tools for biologists. This book draws upon the popularity and free availability of R to couple the theory and practice of biostatistics into a single treatment, so as to provide a textbook for biologists learning statistics, R, or both. An abridged description of biostatistical principles and analysis sequence keys are combined together with worked examples of the practical use of R into a complete practical guide to designing and analyzing real biological research. Topics covered include: simple hypothesis testing, graphing exploratory data analysis and graphical summaries regression (linear, multi and non-linear) simple and complex ANOVA and ANCOVA designs (including nested, factorial, blocking, spit-plot and repeated measures) frequency analysis and generalized linear models. Linear mixed effects modeling is also incorporated extensively throughout as an alternative to traditional modeling techniques. The book is accompanied by a companion website www.wiley.com/go/logan/r with an extensive set of resources comprising all R scripts and data sets used in the book, additional worked examples, the biology package, and other instructional materials and links.

Download or read book Using R for Biostatistics written by Thomas W. MacFarland and published by Springer Nature. This book was released on 2021-03-02 with total page 929 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the open source R software language that can be implemented in biostatistics for data organization, statistical analysis, and graphical presentation. In the years since the authors’ 2014 work Introduction to Data Analysis and Graphical Presentation in Biostatistics with R, the R user community has grown exponentially and the R language has increased in maturity and functionality. This updated volume expands upon skill-sets useful for students and practitioners in the biological sciences by describing how to work with data in an efficient manner, how to engage in meaningful statistical analyses from multiple perspectives, and how to generate high-quality graphics for professional publication of their research. A common theme for research in the diverse biological sciences is that decision-making depends on the empirical use of data. Beginning with a focus on data from a parametric perspective, the authors address topics such as Student t-Tests for independent samples and matched pairs; oneway and twoway analyses of variance; and correlation and linear regression. The authors also demonstrate the importance of a nonparametric perspective for quality assurance through chapters on the Mann-Whitney U Test, Wilcoxon Matched-Pairs Signed-Ranks test, Kruskal-Wallis H-Test for Oneway Analysis of Variance, and the Friedman Twoway Analysis of Variance. To address the element of data presentation, the book also provides an extensive review of the many graphical functions available with R. There are now perhaps more than 15,000 external packages available to the R community. The authors place special emphasis on graphics using the lattice package and the ggplot2 package, as well as less common, but equally useful, figures such as bean plots, strip charts, and violin plots. A robust package of supplementary material, as well as an introduction of the development of both R and the discipline of biostatistics, makes this ideal for novice learners as well as more experienced practitioners.

Download or read book Clinical Trial Data Analysis Using R written by Ding-Geng (Din) Chen and published by CRC Press. This book was released on 2010-12-14 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Too often in biostatistical research and clinical trials, a knowledge gap exists between developed statistical methods and the applications of these methods. Filling this gap, Clinical Trial Data Analysis Using R provides a thorough presentation of biostatistical analyses of clinical trial data and shows step by step how to implement the statistical methods using R. The book’s practical, detailed approach draws on the authors’ 30 years of real-world experience in biostatistical research and clinical development. Each chapter presents examples of clinical trials based on the authors’ actual experiences in clinical drug development. Various biostatistical methods for analyzing the data are then identified. The authors develop analysis code step by step using appropriate R packages and functions. This approach enables readers to gain an understanding of the analysis methods and R implementation so that they can use R to analyze their own clinical trial data. With step-by-step illustrations of R implementations, this book shows how to easily use R to simulate and analyze data from a clinical trial. It describes numerous up-to-date statistical methods and offers sound guidance on the processes involved in clinical trials.

Download or read book Biostatistics with R written by Babak Shahbaba and published by Springer Science & Business Media. This book was released on 2011-12-15 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biostatistics with R is designed around the dynamic interplay among statistical methods, their applications in biology, and their implementation. The book explains basic statistical concepts with a simple yet rigorous language. The development of ideas is in the context of real applied problems, for which step-by-step instructions for using R and R-Commander are provided. Topics include data exploration, estimation, hypothesis testing, linear regression analysis, and clustering with two appendices on installing and using R and R-Commander. A novel feature of this book is an introduction to Bayesian analysis. This author discusses basic statistical analysis through a series of biological examples using R and R-Commander as computational tools. The book is ideal for instructors of basic statistics for biologists and other health scientists. The step-by-step application of statistical methods discussed in this book allows readers, who are interested in statistics and its application in biology, to use the book as a self-learning text.

Download or read book Clinical Trial Data Analysis Using R and SAS written by Ding-Geng (Din) Chen and published by CRC Press. This book was released on 2017-06-01 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Review of the First Edition "The goal of this book, as stated by the authors, is to fill the knowledge gap that exists between developed statistical methods and the applications of these methods. Overall, this book achieves the goal successfully and does a nice job. I would highly recommend it ...The example-based approach is easy to follow and makes the book a very helpful desktop reference for many biostatistics methods."—Journal of Statistical Software Clinical Trial Data Analysis Using R and SAS, Second Edition provides a thorough presentation of biostatistical analyses of clinical trial data with step-by-step implementations using R and SAS. The book’s practical, detailed approach draws on the authors’ 30 years’ experience in biostatistical research and clinical development. The authors develop step-by-step analysis code using appropriate R packages and functions and SAS PROCS, which enables readers to gain an understanding of the analysis methods and R and SAS implementation so that they can use these two popular software packages to analyze their own clinical trial data. What’s New in the Second Edition Adds SAS programs along with the R programs for clinical trial data analysis. Updates all the statistical analysis with updated R packages. Includes correlated data analysis with multivariate analysis of variance. Applies R and SAS to clinical trial data from hypertension, duodenal ulcer, beta blockers, familial andenomatous polyposis, and breast cancer trials. Covers the biostatistical aspects of various clinical trials, including treatment comparisons, time-to-event endpoints, longitudinal clinical trials, and bioequivalence trials.

Download or read book Introduction to Data Analysis and Graphical Presentation in Biostatistics with R written by Thomas W. MacFarland and published by Springer Science & Business Media. This book was released on 2013-11-19 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: Through real-world datasets, this book shows the reader how to work with material in biostatistics using the open source software R. These include tools that are critical to dealing with missing data, which is a pressing scientific issue for those engaged in biostatistics. Readers will be equipped to run analyses and make graphical presentations based on the sample dataset and their own data. The hands-on approach will benefit students and ensure the accessibility of this book for readers with a basic understanding of R. Topics include: an introduction to Biostatistics and R, data exploration, descriptive statistics and measures of central tendency, t-Test for independent samples, t-Test for matched pairs, ANOVA, correlation and linear regression, and advice for future work.

Download or read book Analyzing Health Data in R for SAS Users written by Monika Maya Wahi and published by CRC Press. This book was released on 2017-11-22 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analyzing Health Data in R for SAS Users is aimed at helping health data analysts who use SAS accomplish some of the same tasks in R. It is targeted to public health students and professionals who have a background in biostatistics and SAS software, but are new to R. For professors, it is useful as a textbook for a descriptive or regression modeling class, as it uses a publicly-available dataset for examples, and provides exercises at the end of each chapter. For students and public health professionals, not only is it a gentle introduction to R, but it can serve as a guide to developing the results for a research report using R software. Features: Gives examples in both SAS and R Demonstrates descriptive statistics as well as linear and logistic regression Provides exercise questions and answers at the end of each chapter Uses examples from the publicly available dataset, Behavioral Risk Factor Surveillance System (BRFSS) 2014 data Guides the reader on producing a health analysis that could be published as a research report Gives an example of hypothesis-driven data analysis Provides examples of plots with a color insert

Download or read book Statistical Methods for the Analysis of Biomedical Data written by Robert F. Woolson and published by John Wiley & Sons. This book was released on 2011-01-25 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dieser Band behandelt eine Reihe statistischer Themen, die bei der Analyse biologischer und medizinischer Daten allgemein Anwendung finden. Diese 2. Auflage wurde komplett überarbeitet, aktualisiert und erweitert. Einige Kapitel sind neu hinzugekommen, u.a. zur multiplen linearen Regression in der biomedizinischen Forschung. Der Stoff ist so gegliedert, dass der Leser den Text unabhängig von der jeweiligen statistischen Methode leicht nach Problemstellungen durchsuchen kann. Mit zahlreichen durchgearbeiteten Beispielen, die detaillierte Lösungsangaben zu Problemen aus der Praxis liefern.

Download or read book Statistical Analytics for Health Data Science with SAS and R written by Jeffrey Wilson and published by CRC Press. This book was released on 2023-03-27 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to compile typical fundamental-to-advanced statistical methods to be used for health data sciences. Although the book promotes applications to health and health-related data, the models in the book can be used to analyze any kind of data. The data are analyzed with the commonly used statistical software of R/SAS (with online supplementary on SPSS/Stata). The data and computing programs will be available to facilitate readers’ learning experience. There has been considerable attention to making statistical methods and analytics available to health data science researchers and students. This book brings it all together to provide a concise point-of-reference for the most commonly used statistical methods from the fundamental level to the advanced level. We envisage this book will contribute to the rapid development in health data science. We provide straightforward explanations of the collected statistical theory and models, compilations of a variety of publicly available data, and illustrations of data analytics using commonly used statistical software of SAS/R. We will have the data and computer programs available for readers to replicate and implement the new methods. The primary readers would be applied data scientists and practitioners in any field of data science, applied statistical analysts and scientists in public health, academic researchers, and graduate students in statistics and biostatistics. The secondary readers would be R&D professionals/practitioners in industry and governmental agencies. This book can be used for both teaching and applied research.

Download or read book Statistical Analysis of Microbiome Data with R written by Yinglin Xia and published by Springer. This book was released on 2018-10-20 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique book addresses the statistical modelling and analysis of microbiome data using cutting-edge R software. It includes real-world data from the authors’ research and from the public domain, and discusses the implementation of R for data analysis step by step. The data and R computer programs are publicly available, allowing readers to replicate the model development and data analysis presented in each chapter, so that these new methods can be readily applied in their own research. The book also discusses recent developments in statistical modelling and data analysis in microbiome research, as well as the latest advances in next-generation sequencing and big data in methodological development and applications. This timely book will greatly benefit all readers involved in microbiome, ecology and microarray data analyses, as well as other fields of research.

Download or read book Molecular Data Analysis Using R written by Csaba Ortutay and published by John Wiley & Sons. This book was released on 2017-02-06 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the difficulties experienced by wet lab researchers with the statistical analysis of molecular biology related data. The authors explain how to use R and Bioconductor for the analysis of experimental data in the field of molecular biology. The content is based upon two university courses for bioinformatics and experimental biology students (Biological Data Analysis with R and High-throughput Data Analysis with R). The material is divided into chapters based upon the experimental methods used in the laboratories. Key features include: • Broad appeal--the authors target their material to researchers in several levels, ensuring that the basics are always covered. • First book to explain how to use R and Bioconductor for the analysis of several types of experimental data in the field of molecular biology. • Focuses on R and Bioconductor, which are widely used for data analysis. One great benefit of R and Bioconductor is that there is a vast user community and very active discussion in place, in addition to the practice of sharing codes. Further, R is the platform for implementing new analysis approaches, therefore novel methods are available early for R users.