Download or read book Bioprocessing Safety written by Warren C. Hyer and published by ASTM International. This book was released on 1990 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guidelines for Process Safety in Bioprocess Manufacturing Facilities written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2011-12-28 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book helps advance process safety in a key area of interest. Currently, no literature exists which is solely dedicated to process safety for the bioprocessing industry. There are texts, guidelines, and standards on biosafety at the laboratory level and for industrial hygiene, but no guidelines for large-scale production facilities. In fact, biosafety is largely defined as a field that promotes safe laboratory practices, procedures and use of containment equipment and facilities. Additionally, biomedical engineers, biologists, or other professionals without chemical engineering training or knowledge of inherently safe design are designing many of these facilities.
Download or read book Guidelines for Process Safety in Bioprocess Manufacturing Facilities written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2010-11-23 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book helps advance process safety in a key area of interest. Currently, no literature exists which is solely dedicated to process safety for the bioprocessing industry. There are texts, guidelines, and standards on biosafety at the laboratory level and for industrial hygiene, but no guidelines for large-scale production facilities. In fact, biosafety is largely defined as a field that promotes safe laboratory practices, procedures and use of containment equipment and facilities. Additionally, biomedical engineers, biologists, or other professionals without chemical engineering training or knowledge of inherently safe design are designing many of these facilities.
Download or read book Safety in Bioprocessing written by MA. Foglesong and published by . This book was released on 1990 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: The experience of Eli Lilly and Co. has demonstrated that large-scale bioprocessing can be conducted under conditions that provide safety for the fermentation operator as well as the environment. Thirty years of medical surveillance of workers associated with large-scale bioprocessing has shown no increased incidence of morbidity or mortality associated with these processes. Over 100 000 h of experience with large-scale recombinant DNA fermentations has demonstrated that, with proper design and validation criteria, genetically engineered microorganisms can be developed and the operation scaled to efficient and economical processes with excellent protection to the environment and the operating personnel. Large-scale mammalian cell culture processes, which possess their own unique set of bio-safety issues, are being developed with safeguards that ensure the use of well-characterized cell lines, the inactivation of process streams, and the elimination of risk to the bioprocess operators.
Download or read book Biosafety in Industrial Biotechnology written by P. Hambleton and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: As an industry, biotechnology may be likened to the Hymn Book, being both ancient and modern. Whereas activities such as baking, brewing, the fermenting of foods date from our earliest attempts to control and utilise the environment, the application of recombinant DNA technology is recognised as being at the forefront of novel industrial development. Perhaps because of its association with processing foodstuffs together with the benefits derived from applications in the early organic chemistry and pharmaceutical industries, biotechnology has been regarded as being inherently safe. Yet unlike other modern industries, such as chemical and nuclear, where regulation has followed from incidents or accidents, modern biotechnology has been subject to close scrutiny and regulation almost from its inception. The process of regulation itself is somewhat unusual in that it was initially self-imposed by the very scientists who developed the fundamental techniques of recombinant DNA technology. They recognised the signific ance of their development but were concerned of the effects on humans and the environment of uncontrolled application of the new, powerful technology. Concern about the possible consequences of genetic manipula tion has undoubtedly been the driving force behind the regulations that are now in place in many parts of the world and which are the subject of this book. Safety issues in the biotechnology industry can be categorised under three headings: worker, environmental and consumer (product) safety.
Download or read book Safety in Cell and Tissue Culture written by G. Stacey and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is now more than half a century since animal cells first came into regular use in the laboratory. Instances of laboratory acquired infection and con tamination of therapeutic products, derived from the use of animal cell cultures are rare. The use of animal cells, in addition to an established role in the production of vaccines and therapeutic proteins, has many new medical applications including gene therapy, tissue engineering and cell therapy. Furthermore, C;ldvances in molecular and cell biology are enabling rapid development and application of these technologies and the development of new and more sensitive methods, such as nucleic acid amplification, for the characterisation of cells and the detection of adven titious agents. However, it is clear that there is no room for complacency in this field and the recent expansion in the use of animal cells in the manufacture of medical products and the development of new biological assays for diagnostic and pharmaco-toxicological screening, underlines the need for vigilance regarding the correct and safe use of animal cells as substrates. This book is therefore very timely and should prove to be a highly valuable text, finding a wider audience beyond those with respon sibility for laboratory safety. The book guides the reader from fundamental cell biology issues and the establishment of new in vitro methods, through testing and validation of cell lines and on to issues in the use of animal cells in manufacturing processes.
Download or read book Safety in Industrial Microbiology and Biotechnology written by C. H. Collins and published by Elsevier. This book was released on 2015-09-03 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety in Industrial Microbiology and Biotechnology reviews the hazards involved in work with both naturally occurring and genetically-modified microorganisms. This text is divided into 12 chapters and begins with an overview of the laboratory- and industry-associated infection hazards. The subsequent chapters deal with the legal issues, containment, risk assessment, and pathogenicity testing of infection related to industrial microbiology and biotechnology. These topics are followed by discussions of the safety considerations in recombinant plasmid preparation, the safe handling of industrially-produced mammalian cells, and some genetic designs that can be applied to processes based on recombinant DNA microorganisms. Other chapters explore the design for safety in bioprocessing and the containment in the development and manufacture of recombinant DNA-derived products. The remaining chapters look into the monitoring and validation in biotechnological processes, as well as the occupational health implications of industrial biotechnology. This book will prove useful to biotechnologists, microbiologists, safety engineers, and researchers.
Download or read book Handbook of Industrial Chemistry and Biotechnology written by James A. Kent and published by Springer Science & Business Media. This book was released on 2013-01-13 with total page 1560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Substantially revising and updating the classic reference in the field, this handbook offers a valuable overview and myriad details on current chemical processes, products, and practices. No other source offers as much data on the chemistry, engineering, economics, and infrastructure of the industry. The Handbook serves a spectrum of individuals, from those who are directly involved in the chemical industry to others in related industries and activities. It provides not only the underlying science and technology for important industry sectors, but also broad coverage of critical supporting topics. Industrial processes and products can be much enhanced through observing the tenets and applying the methodologies found in chapters on Green Engineering and Chemistry (specifically, biomass conversion), Practical Catalysis, and Environmental Measurements; as well as expanded treatment of Safety, chemistry plant security, and Emergency Preparedness. Understanding these factors allows them to be part of the total process and helps achieve optimum results in, for example, process development, review, and modification. Important topics in the energy field, namely nuclear, coal, natural gas, and petroleum, are covered in individual chapters. Other new chapters include energy conversion, energy storage, emerging nanoscience and technology. Updated sections include more material on biomass conversion, as well as three chapters covering biotechnology topics, namely, Industrial Biotechnology, Industrial Enzymes, and Industrial Production of Therapeutic Proteins.
Download or read book Bioprocess Engineering written by Shijie Liu and published by Newnes. This book was released on 2012-11-21 with total page 1001 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioprocess Engineering involves the design and development of equipment and processes for the manufacturing of products such as food, feed, pharmaceuticals, nutraceuticals, chemicals, and polymers and paper from biological materials. It also deals with studying various biotechnological processes. "Bioprocess Kinetics and Systems Engineering" first of its kind contains systematic and comprehensive content on bioprocess kinetics, bioprocess systems, sustainability and reaction engineering. Dr. Shijie Liu reviews the relevant fundamentals of chemical kinetics-including batch and continuous reactors, biochemistry, microbiology, molecular biology, reaction engineering, and bioprocess systems engineering- introducing key principles that enable bioprocess engineers to engage in the analysis, optimization, design and consistent control over biological and chemical transformations. The quantitative treatment of bioprocesses is the central theme of this book, while more advanced techniques and applications are covered with some depth. Many theoretical derivations and simplifications are used to demonstrate how empirical kinetic models are applicable to complicated bioprocess systems. Contains extensive illustrative drawings which make the understanding of the subject easy Contains worked examples of the various process parameters, their significance and their specific practical use Provides the theory of bioprocess kinetics from simple concepts to complex metabolic pathways Incorporates sustainability concepts into the various bioprocesses
- Author : Shang-Tian Yang
- Publisher : John Wiley & Sons
- Release : 2013-05-24
- ISBN : 1118641949
- Pages : 561 pages
Bioprocessing Technologies in Biorefinery for Sustainable Production of Fuels Chemicals and Polymers
Download or read book Bioprocessing Technologies in Biorefinery for Sustainable Production of Fuels Chemicals and Polymers written by Shang-Tian Yang and published by John Wiley & Sons. This book was released on 2013-05-24 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sets the stage for large-scale production of biofuels and bio-based chemicals In response to diminishing supplies as well as the environmental hazards posed by fossil fuels and petrochemicals, interest and demand for green, sustainable biofuels and bio-based chemicals are soaring. Biomass may be the solution. It is an abundant carbon-neutral renewable feedstock that can be used for the production of fuels and chemicals. Currently, biorefineries use corn, soybeans, and sugarcane for bioethanol and biodiesel production; however, there are many challenges facing biorefineries, preventing biomass from reaching its full potential. This book provides a comprehensive review of bioprocessing technologies that use lignocellulosic biomass for the production of biofuels, biochemicals, and biopolymers. It begins with an overview of integrated biorefineries. Next, it covers: Biomass feedstocks, including sugar, starch, oil, and energy crops as well as microalgae Pretreatment technologies for lignocellulosic biomass Hydrolytic enzymes used in biorefineries for the hydrolysis of starch and lignocelluloses Bioconversion technologies for current and future biofuels such as ethanol, biodiesel, butanol, hydrogen, and biogas Specialty chemicals, building block chemicals, and biopolymers produced via fermentation Phytochemicals and functional food ingredients extracted from plant materials All the chapters have been written and edited by leading experts in bioprocessing and biorefining technologies. Contributions are based on a thorough review of the literature as well as the authors' firsthand experience developing and working with bioprocessing technologies. By setting forth the current state of the technology and pointing to promising new directions in research, Bioprocessing Technologies in Biorefinery for Sustainable Production of Fuels, Chemicals, and Polymers will enable readers to move towards large-scale, sustainable, and economical production of biofuels and bio-based chemicals.
Download or read book Fundamentals of Modern Bioprocessing written by Sarfaraz K. Niazi and published by CRC Press. This book was released on 2017-07-27 with total page 746 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biological drug and vaccine manufacturing has quickly become one of the highest-value fields of bioprocess engineering, and many bioprocess engineers are now finding job opportunities that have traditionally gone to chemical engineers. Fundamentals of Modern Bioprocessing addresses this growing demand. Written by experts well-established in the field, this book connects the principles and applications of bioprocessing engineering to healthcare product manufacturing and expands on areas of opportunity for qualified bioprocess engineers and students. The book is divided into two sections: the first half centers on the engineering fundamentals of bioprocessing; while the second half serves as a handbook offering advice and practical applications. Focused on the fundamental principles at the core of this discipline, this work outlines every facet of design, component selection, and regulatory concerns. It discusses the purpose of bioprocessing (to produce products suitable for human use), describes the manufacturing technologies related to bioprocessing, and explores the rapid expansion of bioprocess engineering applications relevant to health care product manufacturing. It also considers the future of bioprocessing—the use of disposable components (which is the fastest growing area in the field of bioprocessing) to replace traditional stainless steel. In addition, this text: Discusses the many types of genetically modified organisms Outlines laboratory techniques Includes the most recent developments Serves as a reference and contains an extensive bibliography Emphasizes biological manufacturing using recombinant processing, which begins with creating a genetically modified organism using recombinant techniques Fundamentals of Modern Bioprocessing outlines both the principles and applications of bioprocessing engineering related to healthcare product manufacturing. It lays out the basic concepts, definitions, methods and applications of bioprocessing. A single volume comprehensive reference developed to meet the needs of students with a bioprocessing background; it can also be used as a source for professionals in the field.
Download or read book Continuous Biomanufacturing written by Ganapathy Subramanian and published by John Wiley & Sons. This book was released on 2017-12-26 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the most comprehensive treatise of this topic available, providing invaluable information on the technological and economic benefits to be gained from implementing continuous processes in the biopharmaceutical industry. Top experts from industry and academia cover the latest technical developments in the field, describing the use of single-use technologies alongside perfusion production platforms and downstream operations. Special emphasis is given to process control and monitoring, including such topics as 'quality by design' and automation. The book is supplemented by case studies that highlight the enormous potential of continuous manufacturing for biopharmaceutical production facilities.
Download or read book Bioprocessing Technology in Food and Health Potential Applications and Emerging Scope written by Deepak Kumar Verma and published by CRC Press. This book was released on 2018-09-21 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: The functional foods market represents one of the fastest growing and most fascinating areas of investigation and innovation in the food sector. This new volume focuses on recent findings, new research trends, and emerging technologies in bioprocessing: making use of microorganisms in the production of food with health and nutritional benefits. The volume is divided into three main parts. Part I discusses functional food production and human health, looking at some newly emerged bioprocessing technological advances in the functional foods (chocolates, whey beverages) in conjunction their prospective health benefits. Part II, on emerging applications of microorganism in safe food production, covers recent breakthroughs in food safety in microbial bioprocessing. Chapters discuss spoilage issues, harmful/pathogenic microorganisms, genetically modified microorganisms, stability and functionality, and potential of food-grade microbes for biodegradation of toxic compounds, such as mycotoxins, pesticides, and polycyclic hydrocarbons. Chapters in Part III, on emerging scope and potential application in the dairy and food industry, explore and investigate the current shortcomings and challenges of the microbially mediated processes at the industrial level. The editors have brought together a group of outstanding international contributors at the forefront of bioprocessing technology to produce a valuable resource for researchers, faculty, students, food nutrition and health practitioners, and all those working in the dairy, food, and nutraceutical industries, especially in the development of functional foods.
Download or read book Perspectives on Opportunities Toward a Hazard Free Bioprocessing Environment written by LJ. Elliott and published by . This book was released on 1990 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical research and commercial applications of biotechnologies are expanding rapidly. The increasing utilization of biotechnology is evident in the areas of clinical research, general medicine, agriculture, chemical synthesis, and waste disposal, to name only a few. In an effort to identify potential occupational health hazards during the early stages of this development, the National Institute for Occupational Safety and Health conducted industrial hygiene surveys at six companies involved in research and development of recombinant DNA (rDNA) techniques applicable to fermentation processes. During each visit potential worker exposures, engineering controls, work practices, and medical surveillance programs were assessed. Varying degrees of proficiency and sophistication were noted in all of the assessed areas. Three companies new to the field (less than ten years old) of industrial fermentation were less sophisticated in their approach to issues involving occupational safety and health than were companies with years of experience (20, 25, and 106 years) in such operations. The three less experienced companies had no operational protocols, conducted limited (if any) environmental monitoring for chemical and microbial hazards, did not conduct preventive maintenance, and had very limited medical surveillance programs. Two of these companies had not conducted any environmental monitoring of the fermentation or product extraction processes. Recommendations were made in the areas of preventive maintenance, environmental monitoring, medical surveillance, and improved containment during fermenter inoculation.
Download or read book Techno Market Survey on Occupational Health Safety and Hazard Management in Bio technology Related Industry written by and published by . This book was released on 1998 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: With reference to India.
Download or read book Comprehensive Biotechnology written by and published by Elsevier. This book was released on 2019-07-17 with total page 4876 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Biotechnology, Third Edition, Six Volume Set unifies, in a single source, a huge amount of information in this growing field. The book covers scientific fundamentals, along with engineering considerations and applications in industry, agriculture, medicine, the environment and socio-economics, including the related government regulatory overviews. This new edition builds on the solid basis provided by previous editions, incorporating all recent advances in the field since the second edition was published in 2011. Offers researchers a one-stop shop for information on the subject of biotechnology Provides in-depth treatment of relevant topics from recognized authorities, including the contributions of a Nobel laureate Presents the perspective of researchers in different fields, such as biochemistry, agriculture, engineering, biomedicine and environmental science
Download or read book Bioprocessing for Cell Based Therapies written by Che J. Connon and published by John Wiley & Sons. This book was released on 2017-02-06 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions from leading, international academics and industrial practitioners, Bioprocessing for Cell-Based Therapies explores the very latest techniques and guidelines in bioprocess production to meet safety, regulatory and ethical requirements, for the production of therapeutic cells, including stem cells. An authoritative, cutting-edge handbook on bioprocessing for the production of therapeutic cells with extensive illustrations in full colour throughout An authoritative, cutting-edge handbook on bioprocessing for the production of therapeutic cells with extensive illustrations in full colour throughout In depth discussion of the application of cell therapy including methods used in the delivery of cells to the patient Includes contributions from experts in both academia and industry, combining a practical approach with cutting edge research The only handbook currently available to provide a state of the art guide to Bioprocessing covering the complete range of cell-based therapies, from experts in academia and industry