Download or read book Biomechanics and Mechanobiology of Aneurysms written by Tim McGloughlin and published by Springer Science & Business Media. This book was released on 2011-09-15 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cardiovascular disease is the leading cause of morbidity and premature death of modern era medicine. It is estimated that approximately 81 million people in the United States (US) currently have one or more of the many forms of cardiovascular disease, resulting in 1 in every 2.8 deaths, or 900,000 deaths per year. 40% of all deaths in Europe are a result of cardiovascular disease in people under the age of 75. Aneurysms form a significant portion of these cardiovascular related deaths and are defined as a permanent and irreversible localised dilation of a blood vessel greater than 50% of its normal diameter. Although aneurysms can form in any blood vessel, the more lethal aneurysms develop in the cranial arteries, and in the thoracic aorta and abdominal aorta. Frequently aneurysms are undetected and if left untreated may eventually expand until rupture with very high levels of morbidity and mortality. The biomechanics and mechanobiology of aneursymal diseases are not fully understood and this monograph aims to provide new insights into aneurysm aetiology and behavior based on the most recent biomechanics research related to this important topic. The contributors to this volume bring together a unique blend of expertise in experimental, computational and tissue biomechanics relating to aneurysm behavior and enable the reader to gain a fresh understanding of key factors influencing aneurysm behavior and treatment. Biological risk factors such as tobacco smoking, sex, age, hypertension, family history and mechanobiological risk factors such as aneurysm geometry and shape as well as mechanical properties of the diseased tissues are considered in detail as are many of the diagnostic and treatment options.
Download or read book Biomechanics of the Aorta written by T. Christian Gasser and published by Elsevier. This book was released on 2024-06-18 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomechanics of the Aorta: Modelling for Patient Care is a holistic analysis of the aorta towards its biomechanical description. The book addresses topics such as physiology, clinical imaging, tissue and blood flow modeling, along with knowledge that is needed in diagnostics, aortic rupture prediction, assist surgical planning, and more. It encompasses a wide range of topics from the basic sciences (Vascular biology, Continuum mechanics, Image analysis) to clinical applications, as well as describing and presenting computational studies and experimental benches to mimic, understand and propose the best treatment of aortic pathologies. The book begins with an introduction to the fundamental aspects of the anatomy, biology and physiopathology of the aorta and proceeds to present the main computational fluid dynamic studies and biomechanical and mechanobiological models developed over the last decade. With approaches, methodologies and findings from contributors all over the world, this new volume in the Biomechanics of Living Organs series will increase understanding of aortic function as well as improve the design of medical devices and clinical interventions, including surgical procedures. Represents a comprehensive means for those involved in the aortic research and the related developments in the industry Introduces the most recent imaging technologies to characterize factors, such as aortic geometry, mechanical properties of the aortic tissue, and the local cellular activity in the vessel wall Synthesizes advances in vascular biomechanics, medical imaging and computational finite element fluid and solid models to increase understanding of aorta function
Download or read book Biomechanics of Abdominal Aortic Aneurysms written by Jianhua Tong and published by . This book was released on 2013 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Biomechanics of Ascending Aortic Aneurysms written by Alexander Emmott and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: "The aorta is the largest artery in the body and serves as the conduit for systemic blood flow from the heart. Its central property is its passive elastic behaviour that converts fluid energy to elastic potential during systole and subsequently returns that stored potential to maintain systemic circulation during diastole. With disease the pathological remodelling of the wall can result in an impairment of its elastic function, particularly in the case of an aortic aneurysm. If left unrepaired, aortic aneurysms carry significant risk of tearing and often result in death or serious disability. Clinical guidelines for surgical intervention are based on aortic diameter thresholds, but unfortunately these criteria are insufficient and an estimated 40% of dissection and rupture cases occur at diameters below the surgical guidelines. Aortic diameter criteria do not fully relay the risk that elastic impairment and pathological remodelling contribute to dissection or rupture. Herein, this thesis tested the hypothesis that the elastic or mechanical properties of the aortic wall can be used as a marker of ascending aortic dysfunction and contribute added information beyond size to identify at-risk patients. In this work we used transesophageal echocardiography, an application of ultrasound imaging to the heart and great vessels, to assess the mechanical properties of the ascending aorta and subsequently validated this methodology with ex vivo tensile analysis on resected tissue. Specifically, we developed novel in vivo stiffness metrics termed the Cardiac Cycle Pressure Modulus (CCPM) and the Cardiac Cycle Stress Modulus (CCSM) that were compared with aortic wall histology and ex vivo stiffness and energy loss parameters that have been widely reported, previously. This approach was applied globally (i.e., circumference averaged) and regionally at four distinct foci around the aortic circumference. Global CCPM and CCSM were significantly predictive of ex vivo mechanical indices and histopathology and could be used to identify patients with adverse aortic remodelling who did not meet standard surgical criteria of ≥5.5 cm diameter. Regional analysis demonstrated that heterogeneity in CCPM and CCSM increased with medial degeneration creating uneven distribution of physiological stress in the aortic wall. Furthermore, both tensile and compressive strain patterns were observed simultaneously in neighbouring regions of some patients suggesting a more complex physio-mechanical environment than had previously been appreciated. Ultimately, this work proposes a novel assessment technique to follow patients with ascending aortic aneurysms that may provide a crucial added dimension to surgical management of patients." --
Download or read book Biomechanics of Soft Tissue in Cardiovascular Systems written by Gerhard A. Holzapfel and published by Springer. This book was released on 2014-05-04 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is written by leading experts in the field presenting an up-to-date view of the subject matter in a didactically sound manner. It presents a review of the current knowledge of the behaviour of soft tissues in the cardiovascular system under mechanical loads, and the importance of constitutive laws in understanding the underlying mechanics is highlighted. Cells are also described together with arteries, tendons and ligaments, heart, and other biological tissues of current research interest in biomechanics. This includes experimental, continuum mechanical and computational perspectives, with the emphasis on nonlinear behaviour, and the simulation of mechanical procedures such as balloon angioplasty.
Download or read book Calcific Aortic Valve Disease written by Elena Aikawa and published by BoD – Books on Demand. This book was released on 2013-06-12 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to population aging, calcific aortic valve disease (CAVD) has become the most common heart valve disease in Western countries. No therapies exist to slow this disease progression, and surgical valve replacement is the only effective treatment. Calcific Aortic Valve Disease covers the contemporary understanding of basic valve biology and the mechanisms of CAVD, provides novel insights into the genetics, proteomics, and metabolomics of CAVD, depicts new strategies in heart valve tissue engineering and regenerative medicine, and explores current treatment approaches. As we are on the verge of understanding the mechanisms of CAVD, we hope that this book will enable readers to comprehend our current knowledge and focus on the possibility of preventing disease progression in the future.
Download or read book Transport in Biological Media written by Sid M. Becker and published by Newnes. This book was released on 2013-05-21 with total page 575 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transport in Biological Media is a solid resource of mathematical models for researchers across a broad range of scientific and engineering problems such as the effects of drug delivery, chemotherapy, or insulin intake to interpret transport experiments in areas of cutting edge biological research. A wide range of emerging theoretical and experimental mathematical methodologies are offered by biological topic to appeal to individual researchers to assist them in solving problems in their specific area of research. Researchers in biology, biophysics, biomathematics, chemistry, engineers and clinical fields specific to transport modeling will find this resource indispensible. Provides detailed mathematical model development to interpret experiments and provides current modeling practices Provides a wide range of biological and clinical applications Includes physiological descriptions of models
Download or read book Cardiovascular Biomechanics written by Peter R. Hoskins and published by Springer. This book was released on 2017-02-16 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a balanced presentation of the fundamental principles of cardiovascular biomechanics research, as well as its valuable clinical applications. Pursuing an integrated approach at the interface of the life sciences, physics and engineering, it also includes extensive images to explain the concepts discussed. With a focus on explaining the underlying principles, this book examines the physiology and mechanics of circulation, mechanobiology and the biomechanics of different components of the cardiovascular system, in-vivo techniques, in-vitro techniques, and the medical applications of this research. Written for undergraduate and postgraduate students and including sample problems at the end of each chapter, this interdisciplinary text provides an essential introduction to the topic. It is also an ideal reference text for researchers and clinical practitioners, and will benefit a wide range of students and researchers including engineers, physicists, biologists and clinicians who are interested in the area of cardiovascular biomechanics.
Download or read book An Introduction to Biomechanics written by Jay D. Humphrey and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed to meet the needs of undergraduate students, "Introduction to Biomechanics" takes the fresh approach of combining the viewpoints of both a well-respected teacher and a successful student. With an eye toward practicality without loss of depth of instruction, this book seeks to explain the fundamental concepts of biomechanics. With the accompanying web site providing models, sample problems, review questions and more, Introduction to Biomechanics provides students with the full range of instructional material for this complex and dynamic field.
Download or read book Material Parameter Identification and Inverse Problems in Soft Tissue Biomechanics written by Stéphane Avril and published by Springer. This book was released on 2016-10-12 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: The articles in this book review hybrid experimental-computational methods applied to soft tissues which have been developed by worldwide specialists in the field. People developing computational models of soft tissues and organs will find solutions for calibrating the material parameters of their models; people performing tests on soft tissues will learn what to extract from the data and how to use these data for their models and people worried about the complexity of the biomechanical behavior of soft tissues will find relevant approaches to address this complexity.
Download or read book Aortic Dissection and Related Syndromes written by Ragavendra Baliga and published by Springer Science & Business Media. This book was released on 2007-04-03 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: This state-of the-art publication is a result of the combined efforts of participants from the International Registry of Aortic Dissection (IRAD). It is the most comprehensive reference on aortic dissection The book has been divided into sections. Each chapter provides a succinct overview of the current clinical literature and incorporates illustrations for further explanation.
Download or read book Cardiovascular Mechanics written by Michel R. Labrosse and published by CRC Press. This book was released on 2018-09-13 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to illustrate in specific detail how cardiovascular mechanics stands as a common pillar supporting such different clinical successes as drugs for high blood pressure, prosthetic heart valves and coronary artery bypass grafting, among others. This information is conveyed through a comprehensive treatment of the overarching principles and theories that are behind mechanobiological processes, aortic and arterial mechanics, atherosclerosis, blood and microcirculation, hear valve mechanics, as well as medical devices and drugs. Examines all major theoretical and practical aspects of mechanical forces related to the cardiovascular system. Discusses a unique coverage of mechanical changes related to an aging cardiovascular system. Provides an overview of experimental methods in cardiovascular mechanics. Written by world-class researchers from Canada, the US and EU. Extensive references are provided at the end of each chapter to enhance further study. Michel R. Labrosse is the founder of the Cardiovascular Mechanics Laboratory at the University of Ottawa, where he is a full professor within the Department of Mechanical Engineering. He has been an active researcher in academia along with being heavily associated with the University of Ottawa Heart Institute. He has authored or co-authored over 90 refereed communications, and supervised or co-supervised over 40 graduate students and post-docs.
Download or read book Computational Biomechanics for Medicine written by Barry Doyle and published by Springer. This book was released on 2014-05-24 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the greatest challenges facing the computational engineering community is to extend the success of computational mechanics to fields outside traditional engineering, in particular to biology, the biomedical sciences and medicine. The Computational Biomechanics for Medicine series provides an opportunity for specialists in computational biomechanics to present their latest methodologies and advancements. This 5th edition comprises nine of the latest developments in both fundamental science and patient-specific applications, from researchers in Australia, New Zealand, USA, UK, France, Ireland and China. Some of the interesting topics discussed are: cellular mechanics; tumor growth and modeling; medical image analysis and both patient-specific fluid dynamics and solid mechanic simulations.
Download or read book Computational Biomechanics written by Kozaburo Hayashi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: The combination of readily available computing power and progress in numerical techniques has made nonlinear systems - the kind that only a few years ago were ignored as too complex - open to analysis for the first time. Now realistic models of living systems incorporating the nonlinear variation and anisotropic nature of physical properties can be solved numerically on modern computers to give realistically usable results. This has opened up new and exciting possibilities for the fusing of ideas from physiology and engineering in the burgeoning new field that is biomechanics. Computational Biomechanics presents pioneering work focusing on the areas of orthopedic and circulatory mechanics, using experimental results to confirm or improve the relevant mathematical models and parameters. Together with two companion volumes, Biomechanics: Functional Adaptation and Remodeling and the Data Book on Mechanical Properties of Living Cells, Tissues, and Organs, this monograph will prove invaluable to those working in fields ranging from medical science and clinical medicine to biomedical engineering and applied mechanics.
Download or read book Multiscale Mechanobiology of Bone Remodeling and Adaptation written by Peter Pivonka and published by Springer. This book was released on 2017-06-20 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents state-of-the-art developments in multiscale modeling and latest experimental data on multiscale mechanobiology of bone remodeling and adaptation including fracture healing applications. The multiscale models include musculoskeletal models describing bone-muscle interactions during daily activities such as walking or running, micromechanical models for estimation of bone mechanical properties, bone remodeling and adaptation models, cellular models describing the complex bone-cell interactions taking into account biochemical and biomechanical regulatory factors. Also subcellular processes are covered including arrangement of actin filaments due to mechanical loading and change of receptor configurations.
Download or read book Mechanical Properties of Arteries written by Jan-Lucas Gade and published by Linköping University Electronic Press. This book was released on 2019-08-29 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this Licentiate of Engineering thesis, a method is proposed that identi?es the mechanical properties of arteries in vivo. The mechanical properties of an artery are linked to the development of cardiovascular diseases. The possibility to identify the mechanical properties of an artery inside the human body could, thus, facilitate disease diagnostization, treatment and monitoring. Supplied with information obtainable in the clinic, typically limited to time- resolved pressure-radius measurement pairs, the proposed in vivo parameter identi- ?cation method calculates six representative parameters by solving a minimization problem. The artery is treated as a homogeneous, incompressible, residual stress- free, thin-walled tube consisting of an elastin dominated matrix with embedded collagen ?bers referred to as the constitutive membrane model. To validate the in vivo parameter identi?cation method, in silico arteries in the form of ?nite element models are created using published data for the human abdominal aorta. With these in silico arteries which serve as mock experiments with pre-de?ned material parameters and boundary conditions, in vivo-like pressure-radius data sets are generated. The mechanical properties of the in silico arteries are then determined using the proposed parameter identi?cation method. By comparing the identi?ed and the pre-de?ned parameters, the identi?cation method is quantitatively validated. The parameters for the radius of the stress-free state and the material constant associated with elastin show high agreement in case of healthy arteries. Larger di?erences are obtained for the material constants associated with collagen, and the largest discrepancy occurs for the in situ axial prestretch. For arteries with a pathologically small elastin content, incorrect parameters are identi?ed but the presence of a diseased artery is revealed by the parameter identi?cation method. Furthermore, the identi?ed parameters are used in the constitutive membrane model to predict the stress state of the artery in question. The stress state is thereby decomposed into an isotropic and an anisotropic component which are primarily associated with the elastin dominated matrix and the collagen ?bers, respectively. In order to assess the accuracy of the predicted stress, it is compared to the known stress state of the in silico arteries. The comparison of the predicted and the in silico decomposed stress states show a close agreement for arteries exhibiting a low transmural stress gradient. With increasing transmural stress gradient the agreement deteriorates. The proposed in vivo parameter identi?cation method is capable of identifying adequate parameters and predicting the decomposed stress state reasonably well for healthy human abdominal aortas from in vivo-like data. In diesem Lizentiat der Ingenieurwissenschaften wird eine Methode zur Identifikation der mechanischen Eigenschaften von Arterien in vivo vorgestellt. Die mechanischen Eigenschaften einer Arterie sind mit der Ausbildung kardiovaskulärer Krankheiten verknüpft und deren Identifikation hat daher das Potenzial die Diagnose, die Behandlung und die Überwachung dieser Krankheiten zu verbessern. Basierend auf klinisch möglichen Messungen, die üblicherweise auf ein zeitaufgelöstes Druck-Radiussignal limitiert sind, werden sechs repräsentative Parameter durch Lösen eines Minimierungsproblems berechnet. Die sechs Parameter sind dabei die Eingangsparameter des zur Hilfe gezogenen konstitutiven Schalenmodells welches eine Arterie als eine homogene, inkompressible, restspannungsfreie und dünnwandige Röhre beschreibt. Weiterhin wird angenommen, dass die Arterienwand aus einer elastindominierten Matrix mit eingebetteten Kollagenfasern besteht. Um die in vivo Parameteridentifikationsmethode zu validieren, werden in silico Arterien in Form von Finite Elemente Modellen erstellt. Diese in silico Arterien beruhen auf publizierten Materialparametern der menschlichen Abdominalaorta und dienen als Pseudoexperimente mit vordefinierten mechanischen Eigenschaften und Randbedingungen. Mit diesen Arterien werden in vivo-ähnliche Druck-Radiussignale erstellt und anschliesend werden ihre mechanischen Eigenschaften mit Hilfe der Parameteridentifikationsmethode bestimmt. Der Vergleich der identifizierten und der vordefinierten Parameter ermöglicht die quantitative Validierung der Methode. Die Parameter des spannungsfreien Radius und der Materialkonstanten für Elastin weisen hohe Übereinstummung im Falle gesunder Arterien auf. Die Abweichung der Materialkonstanten für Kollagen sind etwas gröser und der gröste Unterschied tritt beim axialen in situ Stretch auf. Für Arterien mit einem pathologisch geringen Elastinbestandteil werden falsche Parameter identifiziert, wobei die Parameteridentifikationsmethode eine krankhafte Arterie offenlegt. Weiterhin werden mit Hilfe der identifizierten Parameter und des konstitutiven Schalenmodells der Spannungszustand in der Arterienwand berechnet. Dieser ist dabei aufgeteilt in einen isotropen und einen anisotropen Anteil. Der isotrope Anteil wird mit der elastindomierten Matrix und der anisotrope Anteil mit den Kollagenfasern verknüpft. Um die Genauigkeit des berechneten Spannungszustandes beurteilen zu können, wird dieser mit dem Zustand in den in silico Arterien verglichen. Im Fall von Arterien, die einen geringen transmuralen Spannungsgradienten aufweisen, entspricht der berechnete Spannungszustand dem in silico Zustand. Mit zunehmendem transmuralen Spannungsgradienten lässt die Übereinstimmung nach. Für die gesunde menschliche Abdominalaorta ist die entwickelte in vivo Parameteridentifikationsmethode in der Lage, basierend auf in vivo-ähnlichen Messsignalen, adäquate Parameter zu identifizieren und einen zufriedenstellenden Spannungszustand zu berechnen. I denna licentiatavhandling föreslås en metod för att identifiera mekaniska egenskaper hos artärer in vivo. De mekaniska egenskaperna är kopplade till utvecklingen av hjärt-kärlsjukdomar, och möjligheten att identifiera dessa egenskaper skulle således kunna underlätta diagnostisering, behandling och uppföljning av dessa sjukdomar. Den förslagna metoden använder kliniskt mätbara tryck-radie-signaler och löser ett minimeringsproblem för att bestämma sex parametrar som beskriver kärlets mekaniska egenskaper. Artären modelleras som ett homogent, inkompressibelt och spänningsfritt tunnväggigt rör där kärlväggen utgörs av en elastindominerad matris armerad med inbäddade kollagenfibrer. För att validera parameteridentifieringen skapas en uppsättning representativa, virtuella artärer med hjälp av finita element. Dessa in silico-artärer baseras på publicerade data för mänsklig bukaorta och används för att generera fiktiva tryckradie-signaler vilka sedan matas in i den förslagna modellen. Genom att parametrar och randvillkor för in silico-artärerna är kända fungerar dessa som en kontroll mot vilka resultatet från parameteridentifieringen kan jämföras. Parametrarna som beskriver den icke trycksatta radien och den elastindominerade matrisen visar god överensstämmelse med de in silico-artärerna för friska kärl. Större diskrepans erhålls för de parametrar som associeras med kollagenet, och den största avvikelsen erhålls för den parameter som beskriver den axiella försträckningen. För artärer med patologiskt lågt elastininnehåll identifieras felaktiga parametrar, men resultatet avslöjar ändå tydligt en sjuk artär. De identifierade parametrarna har också använts för att jämföra spänningstillst åndet i membranmodellen och in silico-artäreren. Spänningstillståndet har delats upp i en isotrop och en anisotrop komponent svarande mot, i huvudsak, den elastindominerade matrisen samt kollagenfibrerna. Resultatet visar en mycket god överensstämmelse för bägge komponenterna hos in silico-artärer med låg spänningsgradient genom väggen. Med ökande spänningsgradient försämras dock överensstämmelsen. Resultatet visar att den förslagna metoden är kapabel att identifiera adekvata parametrar och att förutsäga spänningskomponenterna i en frisk aorta.
Download or read book Principles and Biomechanics of Aligner Treatment E Book written by Ravindra Nanda and published by Elsevier Health Sciences. This book was released on 2021-09-21 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Improve patient outcomes with the latest advances in aligner treatment and orthodontics! Principles and Biomechanics of Aligner Treatment describes how to use and adjust the materials involved in tooth alignment. Featuring full-color photos and illustrations, this book provides a clear overview of tooth alignment techniques along with step-by-step instructions for both normal and unusual cases. An Expert Consult website includes access to the fully searchable eBook. From a team of active clinicians and researchers led by Ravindra Nanda, this expert resource takes your orthodontic skills to the next level. Protocols for treatment describe how to manage aligner orthodontics cases in almost every clinical situation. Full-color photos and illustrations show clinical cases. Expert, international authors represent the top fields of aligner orthodontics and provide the latest thinking and the most current procedures. Explanation of biological science makes it easier to understand the principles behind aligner treatment. Coverage of mechanical properties clearly explains the materials used in aligner orthodontics. Tips and tricks provide advice and insight into technical adjustment. Expert Consult website includes fully searchable access to the entire text with each new print purchase.