Download or read book The Handbook of Biomass Combustion and Co firing written by Jaap Koppejan and published by Earthscan. This book was released on 2012-05-16 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique handbook presents both the theory and application of biomass combustion and co-firing, from basic principles to industrial combustion and environmental impact, in a clear and comprehensive manner. It offers a solid grounding on biomass combustion, and advice on improving combustion systems.Written by leading international academics and industrial experts, and prepared under the auspices of the IEA Bioenergy Implementing Agreement, the handbook is an essential resource for anyone interested in biomass combustion and co-firing technologies varying from domestic woodstoves to utility-scale power generation. The book covers subjects including biomass fuel pre-treatment and logistics, modelling the combustion process and ash-related issues, as well as featuring an overview of the current R&D needs regarding biomass combustion.
Download or read book Biomass Combustion Science Technology and Engineering written by Lasse Rosendahl and published by Elsevier. This book was released on 2013-04-04 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: The utilisation of biomass is increasingly important for low- or zero-carbon power generation. Developments in conventional power plant fuel flexibility allow for both direct biomass combustion and co-firing with fossil fuels, while the integration of advanced technologies facilitates conversion of a wide range of biomass feedstocks into more readily combustible fuel. Biomass combustion science, technology and engineering reviews the science and technology of biomass combustion, conversion and utilisation. Part one provides an introduction to biomass supply chains and feedstocks, and outlines the principles of biomass combustion for power generation. Chapters also describe the categorisation and preparation of biomass feedstocks for combustion and gasification. Part two goes on to explore biomass combustion and co-firing, including direct combustion of biomass, biomass co-firing and gasification, fast pyrolysis of biomass for the production of liquids and intermediate pyrolysis technologies. Largescale biomass combustion and biorefineries are then the focus of part three. Following an overview of large-scale biomass combustion plants, key engineering issues and plant operation are discussed, before the book concludes with a chapter looking at the role of biorefineries in increasing the value of the end-products of biomass conversion. With its distinguished editor and international team of expert contributors, Biomass combustion science, technology and engineering provides a clear overview of this important area for all power plant operators, industrial engineers, biomass researchers, process chemists and academics working in this field. Reviews the science and technology of biomass combustion, conversion and utilisation Provides an introduction to biomass supply chains and feedstocks and outlines the principles of biomass combustion for power generation Describes the categorisation and preparation of biomass feedstocks for combustion and gasification
Download or read book Biomass Combustion Systems written by A. S. Tariq and published by Hyperion Books. This book was released on 1994 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: A publication which will be of interest to plant operators and researchers in the field of biomass combustion. It is part of a continuing effort to improve the efficient use of fuelwood and where possible, to encourage replacement of fuelwood with agricultural and forestry residues.
Download or read book Thermochemical Processing of Biomass written by Robert C. Brown and published by John Wiley & Sons. This book was released on 2019-05-28 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive examination of the large number of possible pathways for converting biomass into fuels and power through thermochemical processes Bringing together a widely scattered body of information into a single volume, this book provides complete coverage of the many ways that thermochemical processes are used to transform biomass into fuels, chemicals and power. Fully revised and updated, this new edition highlights the substantial progress and recent developments that have been made in this rapidly growing field since publication of the first edition and incorporates up-to-date information in each chapter. Thermochemical Processing of Biomass: Conversion into Fuels, Chemicals and Power, 2nd Edition incorporates two new chapters covering: condensed phased reactions of thermal deconstruction of biomass and life cycle analysis of thermochemical processing systems. It offers a new introductory chapter that provides a more comprehensive overview of thermochemical technologies. The book also features fresh perspectives from new authors covering such evolving areas as solvent liquefaction and hybrid processing. Other chapters cover combustion, gasification, fast pyrolysis, upgrading of syngas and bio-oil to liquid transportation fuels, and the economics of thermochemically producing fuels and power, and more. Features contributions by a distinguished group of European and American researchers offering a broad and unified description of thermochemical processing options for biomass Combines an overview of the current status of thermochemical biomass conversion as well as engineering aspects to appeal to the broadest audience Edited by one of Biofuels Digest’s "Top 100 People" in bioenergy for six consecutive years Thermochemical Processing of Biomass: Conversion into Fuels, Chemicals and Power, 2nd Edition will appeal to all academic researchers, process chemists, and engineers working in the field of biomass conversion to fuels and chemicals. It is also an excellent book for graduate and advanced undergraduate students studying biomass, biofuels, renewable resources, and energy and power generation.
Download or read book The Handbook of Biomass Combustion and Co firing written by Jaap Koppejan and published by Taylor & Francis. This book was released on 2012-05-16 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique handbook presents both the theory and application of biomass combustion and co-firing, from basic principles to industrial combustion and environmental impact, in a clear and comprehensive manner. It offers a solid grounding on biomass combustion, and advice on improving combustion systems. Written by leading international academics and industrial experts, and prepared under the auspices of the IEA Bioenergy Implementing Agreement, the handbook is an essential resource for anyone interested in biomass combustion and co-firing technologies varying from domestic woodstoves to utility-scale power generation. The book covers subjects including biomass fuel pre-treatment and logistics, modelling the combustion process and ash-related issues, as well as featuring an overview of the current R&D needs regarding biomass combustion.
Download or read book Pollutants Generated by the Combustion of Solid Biomass Fuels written by Jenny M Jones and published by Springer. This book was released on 2014-11-04 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book considers the pollutants formed by the combustion of solid biomass fuels. The availability and potential use of solid biofuels is first discussed because this is the key to the development of biomass as a source of energy. This is followed by details of the methods used for characterisation of biomass and their classification. The various steps in the combustion mechanisms are given together with a compilation of the kinetic data. The chemical mechanisms for the formation of the pollutants: NOx, smoke and unburned hydrocarbons, SOx, Cl compounds, and particulate metal aerosols are given in detail. Combustion kinetics required for the application for design purposes are given. Examples are given of emission levels of a range different types of combustion equipment. Data is given of NOx, particulates and other pollutant arising from combustion of different fuels in fixed bed combustion, fluidized bed combustion and pulverised biomass combustion and co-firing. Modeling methods including computational fluid dynamics for the various pollutants are outlined. The consequential issues arising from the wide scale use of biomass and future trends are then discussed. In particular the role of carbon capture and storage in large biomass combustion plants is considered as well as the opportunity of reducing the concentration of atmospheric concentration of carbon dioxide.
Download or read book Case study biomass combustion systems written by and published by . This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy from Biomass written by Peter Quaak and published by World Bank Publications. This book was released on 1999 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: While energy is essential for development, standard fossil fuels are often in short supply in countries where it is needed most. However, alternative fuel resources abound in the form of agricultural and municipal waste or "biomass." This report reviews the state of the art of biomass combustion and gassification systems, their advantages and disadvantages. It also encourages investment in use of these technologies to enable developing countries to better exploit their biomass resources and help close the gap between their energy needs and their energy supply.
Download or read book Buyer s Guide to Small Commercial Biomass Combustion Systems written by Canada. Natural Resources Canada and published by Natural Resources Canada. This book was released on 2000-01-01 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Biomass combustion science technology and engineering written by S. Caillat and published by Elsevier Inc. Chapters. This book was released on 2013-04-04 with total page 45 pages. Available in PDF, EPUB and Kindle. Book excerpt: For a long time biomass was combusted mostly on a small scale. Now the largest biomass boilers are over 500 MWth. This chapter tries to outline the main methods for large-scale biomass combustion. The main boiler types are the grate and bubbling-fluidised bed boilers although circulating-fluidised bed and pulverised firing do play a role. Particular emphasis has been placed on emissions, the effect of fuel quality and operating issues.
Download or read book Renewable Energy Systems written by Martin Kaltschmitt and published by Springer. This book was released on 2012-12-06 with total page 1898 pages. Available in PDF, EPUB and Kindle. Book excerpt: Humanity is facing a steadily diminishing supply of fossil fuels, causing researchers, policy makers, and the population as a whole to turn increasingly to alternative and especially renewable sources of energy to make up this deficit. Gathering over 80 peer-reviewed entries from the Encyclopedia of Sustainability Science and Technologies, Renewable Energy Systems provides an authoritative introduction to a wide variety of renewable energy sources. State-of-the-art coverage includes geothermal power stations, ocean energy, renewable energy from biomass, waste to energy, and wind power. This comprehensive, two-volume work provides an excellent introduction for those entering these fields, as well as new insights for advanced researchers, industry experts, and decision makers.
Download or read book Biomass and Alternate Fuel Systems written by Thomas F. McGowan and published by John Wiley & Sons. This book was released on 2011-09-20 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains characteristics of renewable fuels, especially biomass and wood, and the cost-effective and environment-friendly methods of handling, storing and burning these fuels. It is complete with the economic evaluation method, introduction of the pollution control equipment for limiting the emission from fuel combustion, case studies, and costs and carbon emission comparisons between conventional and alternate fuels. Many case studies are introduced here too. This book is an update and expansion of the Industrial Wood Energy Handbook by a team from the Georgia Institute of Technology in 1984. It introduces new technologies new technologies not available at the time of the early version.
Download or read book Applications of Advanced Technology to Ash Related Problems in Boilers written by L. Baxter and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 655 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the behavior of inorganic material in combustion systems. The past decade has seen unprecedented improvements in understanding the rates and mecha nisms of inorganic transformations and in developing analytical tools to predict them. These tools range from improved fuel analysis procedures to predictive computer codes. While this progress has been met with great enthusiasm within the research community, the practices of the industrial community remain largely unchanged. The papers in this book were selected from those presented at an Engineering Foundation Conference of the same title. All have been peer reviewed. The intent of the conference was to illustrate the application of advanced technology to ash-related problems in boilers and, by so doing, engage the research and industrial communities in more productive dialog. Those attending the conference generally felt that we were successful on these counts. We also engaged the industrial community to a greater extent than ever before in the conference discussion and presentation. We hope these proceedings will facilitate a continued and improved interaction between industrial and research communities. Behavior of inorganic material has long been recognized as one of the major considerations affecting the design and operation of boilers that burn ash-producing fuels. The practical problems associated with the behavior are sometimes catastrophic and spec tacular, ranging from major slag falls that damage the bottom of furnaces to complete plugging of convection passes.
Download or read book Biomass combustion science technology and engineering written by H. Widell and published by Elsevier Inc. Chapters. This book was released on 2013-04-04 with total page 33 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomass-fired steam boilers are finding increasing use in industrial-scale applications for both heat and power generation. This chapter compares the main technologies for biomass combustion – spreader stoker, mass burn and biomass bubbling fluidised bed (BFB)/circulating fluidised bed (CFB) – and discusses specific issues to be addressed in the design of biomass-fired steam boiler plants. Examples of recent biomass-to-energy plants are given in order to illustrate how project-specific factors influenced the design. A section is dedicated to non-wood biomass fuels and how their characteristics affect plant design. Conversion of existing coal-fired boilers to biomass firing is also discussed. The final part of the chapter deals with operational issues of biomass-fired plants.
Download or read book Biomass combustion science technology and engineering written by C. Yin and published by Elsevier Inc. Chapters. This book was released on 2013-04-04 with total page 31 pages. Available in PDF, EPUB and Kindle. Book excerpt: Co-firing biomass with fossil fuels in existing power plants is an attractive option for significantly increasing renewable energy resource utilization and reducing CO2 emissions. This chapter mainly discusses three direct co-firing technologies: pulverized-fuel (PF) boilers, fluidized-bed combustion (FBC) systems, and grate-firing systems, which are employed in about 50%, 40%, and 10% of all the co-firing plants, respectively. Their basic principles, process technologies, advantages, and limitations are presented, followed by a brief comparison of these technologies when applied to biomass co-firing. This chapter also briefly introduces indirect co-firing and parallel co-firing and their application status.
Download or read book Impact of Mineral Impurities in Solid Fuel Combustion written by R. Gupta and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains papers presented at the Engineering Foundation Conference on mineral matter in fuels held on November 2-7, 1997 in Kona, Hawaii. The conference is one of a continuing series that was initiated by the CEGB Mar- wood Engineering Laboratories in 1963. The conference was to be eventually organised by the Engineering Foundation as the need for multi-disciplinary work related to c- trolling ash effects in combustors became apparent. The conference covers both the science and the applications. The papers also present case histories, particularly for current fuel technologies, developments in advanced technologies for power generation and mathematical modelling of these processes. Developments since 1963 have been slow, but steady, due to the complexity of the chemical and physical processes involved. However, the research presented here displays great improvement in our understanding of the mechanisms by which mineral matter will influence fuel use. Steve Benson from EERC presented a review and current status of issues related to ash deposition in coal combustion and gasification. The application of new analytical tools, which have been detailed in the previous conferences, is presented. These include CCSEM, as well as new techniques for char- terising sintering of ash, such as TMA, image analysis, X-ray diffraction crystallography and thermal analysis. The new analytical techniques were extended to encompass widely differing fuels such as biomass. Ole H Larsen from ELSAM Denmark presented a review of these advanced techniques.
Download or read book Biomass Energy with Carbon Capture and Storage BECCS written by Clair Gough and published by John Wiley & Sons. This book was released on 2018-09-24 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: An essential resource for understanding the potential role for biomass energy with carbon capture and storage in addressing climate change Biomass Energy with Carbon Capture and Storage (BECCS) offers a comprehensive review of the characteristics of BECCS technologies in relation to its various applications. The authors — a team of expert professionals — bring together in one volume the technical, scientific, social, economic and governance issues relating to the potential deployment of BECCS as a key approach to climate change mitigation. The text contains information on the current and future opportunities and constraints for biomass energy, explores the technologies involved in BECCS systems and the performance characteristics of a variety of technical systems. In addition, the text includes an examination of the role of BECCS in climate change mitigation, carbon accounting across the supply chain and policy frameworks. The authors also offer a review of the social and ethical aspects as well as the costs and economics of BECCS. This important text: Reveals the role BECCS could play in the transition to a low-carbon economy Discusses the wide variety of technical and non-technical constraints of BECCS Presents the basics of biomass energy systems Reviews the technical and engineering issues pertinent to BECCS Explores the societal implications of BECCS systems Written for academics and research professionals, Biomass Energy with Carbon Capture and Storage (BECCS) brings together in one volume the issues surrounding BECCS in an accessible and authoritative manner.
