Download or read book Bioinspired Sinusoidal Finger Joint Synergies for a Dexterous Robotic Hand to Screw and Unscrew Objects written by Nareen Karnati and published by . This book was released on 2012 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work deals with the complex task of unscrewing and screwing a threaded bottle cap with a dexterous anthropomorphic robotic hand in two cases: i.e, with the thumb-first finger and also with the thumb-little finger. To that end, human motion profiles of nine test subjects were recorded while unscrewing and screwing a bottle cap with five different orientations of their hand with respect to the bottle. Results showed that the periodic motions exhibited by the finger joints shared a common frequency for each subject, but differed in amplitude and phase. From the gathered data, a set of sinusoidal trajectories were developed to approximate this motion for a robotic hand. Because the joint trajectories share the same frequency, a family of sinusoidal inputs can be used in the path planning of the robot to unscrew and screw threaded objects. This significantly reduces the computational cost and complexity of the task. Additionally, the unscrewing data appears highly similar to the mirror image of the screwing data. This implies that the transition to or from screwing or unscrewing motions can be achieved simply by increasing or decreasing the time vector within the family of sinusoids. Simulation results show that the developed sinusoidal trajectories show a close correlation with the motion profiles seen from human experiments. Furthermore, this solution is broadened to two cases. Case1: objects with wide variations in diameters by relating joint angle offsets of the hand to diameter size through the forward kinematics equations. Additional experiments are performed with different object diameters to show the versatility of the concept. The sinusoidal trajectories are all implemented within a PID sliding mode controller to ensure overall system stability. Using the developed sinusoidal joint angle trajectories, the robotic hand successfully unscrewed and screwed four different objects in all trials conducted with each object diameter size. Case2: An adaptive synergy controller is presented which autonomously modulates the finger synergies of a dexterous robotic hand according to the relative orientation of a grasped object. The adaptive synergy controller is derived from approximating the human motion of unscrewing a bottle cap with sinusoids to replicate the task with a robotic hand. Data from human experiments were used to develop an adaptive synergy controller that autonomously modulates the artificial robotic finger motions in accordance with the orientation angle of the manipulator with respect to the grasped object. By choosing appropriate phase and amplitude parameters for the sinusoids used to drive the adaptive synergy controller, the complex motions involved in performing this task can be controlled by a single input. Experimental results of the adaptive synergy controller show that the control strategy successfully allows a dexterous robotic hand to unscrew and screw objects in multiple orientations using only a single input.
Download or read book Trends in Intelligent Robotics Automation and Manufacturing written by S.G. Poonambalam and published by Springer. This book was released on 2012-11-28 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the First International Conference on Intelligent Robotics and Manufacturing, IRAM 2012, held in Kuala Lumpur, Malaysia, in November 2012. The 64 revised full papers included in this volume were carefully reviewed and selected from 102 initial submissions. The papers are organized in topical sections named: mobile robots, intelligent autonomous systems, robot vision and robust, autonomous agents, micro, meso and nano-scale automation and assembly, flexible manufacturing systems, CIM and micro-machining, and fabrication techniques.
Download or read book The Future of Humanoid Robots written by Riadh Zaier and published by BoD – Books on Demand. This book was released on 2012-01-20 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides state of the art scientific and engineering research findings and developments in the field of humanoid robotics and its applications. It is expected that humanoids will change the way we interact with machines, and will have the ability to blend perfectly into an environment already designed for humans. The book contains chapters that aim to discover the future abilities of humanoid robots by presenting a variety of integrated research in various scientific and engineering fields, such as locomotion, perception, adaptive behavior, human-robot interaction, neuroscience and machine learning. The book is designed to be accessible and practical, with an emphasis on useful information to those working in the fields of robotics, cognitive science, artificial intelligence, computational methods and other fields of science directly or indirectly related to the development and usage of future humanoid robots. The editor of the book has extensive R
Download or read book ROMANSY 21 Robot Design Dynamics and Control written by Vincenzo Parenti-Castelli and published by Springer. This book was released on 2016-06-29 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume contains papers that have been selected after review for oral presentation at ROMANSY 2016, the 21th CISM-IFToMM Symposium on Theory and Practice of Robots and Manipulators. These papers cover advances on several aspects of the wide field of Robotics as concerning Theory and Practice of Robots and Manipulators. ROMANSY 2016 is the 21st event in a series that started in 1973 as one of the first conference activities in the world on Robotics. The first event was held at CISM (International Centre for Mechanical Science) in Udine, Italy on 5-8 September 1973. It was also the first topic conference of IFToMM (International Federation for the Promotion of Mechanism and Machine Science) and it was directed not only to the IFToMM community.
Download or read book The Grasping Hand written by C.L. MacKenzie and published by Elsevier. This book was released on 1994-02-03 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: The simple task of grasping objects has been studied for centuries by scientists, therapists and engineers who have tried to understand and duplicate the versatility of the human hand. Using an interdisciplinary approach and new framework for looking at prehension, the authors uncover the subleties of the amazing interaction between the hand and the brain. They draw from such diverse fields as experimental psychology, kinesiology, robotics, neural networks, artificial intelligence, neuropsychology and rehabilitation. A triangle strategy is presented, starting from conceptual models that suggest both experimental and computational models. Chapters describe the multiple postures established by the hand, phases in the dynamic process of reaching for, grasping and manipulating various objects, and the constraints acting on such activity. Appendices provide the complete anatomy of the upper limb, the basics of computational modelling, and the fundamentals of prosthetic and dextrous robot hands. The ultimate goal of this book is to develop a common vocabularly for multidisciplinary researchers who strive to understand a system as complex as the hand under the control of the human brain.
Download or read book Distributed Autonomous Robotic Systems 3 written by Tim Lueth and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distributed autonomous robotic systems (DARS) are systems composed of multiple autonomous units such as modules, cells, processors, agents, and robots. Combination or cooperative operation of multiple autonomous units is expected to lead to desirable features such as flexibility, fault tolerance, and efficiency. The DARS is the leading established conference on distributed autonomous systems. All papers have the common goal to contribute solutions to the very demanding task of designing distributed systems to realize robust and intelligent robotic systems.
Download or read book Wearable Robotics written by Jacob Rosen and published by Academic Press. This book was released on 2019-11-16 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wearable Robotics: Systems and Applications provides a comprehensive overview of the entire field of wearable robotics, including active orthotics (exoskeleton) and active prosthetics for the upper and lower limb and full body. In its two major sections, wearable robotics systems are described from both engineering perspectives and their application in medicine and industry. Systems and applications at various levels of the development cycle are presented, including those that are still under active research and development, systems that are under preliminary or full clinical trials, and those in commercialized products. This book is a great resource for anyone working in this field, including researchers, industry professionals and those who want to use it as a teaching mechanism. Provides a comprehensive overview of the entire field, with both engineering and medical perspectives Helps readers quickly and efficiently design and develop wearable robotics for healthcare applications
Download or read book Adaptive Motion of Animals and Machines written by Hiroshi Kimura and published by Springer Science & Business Media. This book was released on 2006-07-28 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: • Motivation It is our dream to understand the principles of animals’ remarkable ability for adaptive motion and to transfer such abilities to a robot. Up to now, mechanisms for generation and control of stereotyped motions and adaptive motions in well-known simple environments have been formulated to some extentandsuccessfullyappliedtorobots.However,principlesofadaptationto variousenvironmentshavenotyetbeenclari?ed,andautonomousadaptation remains unsolved as a seriously di?cult problem in robotics. Apparently, the ability of animals and robots to adapt in a real world cannot be explained or realized by one single function in a control system and mechanism. That is, adaptation in motion is induced at every level from thecentralnervoussystemtothemusculoskeletalsystem.Thus,weorganized the International Symposium on Adaptive Motion in Animals and Machines(AMAM)forscientistsandengineersconcernedwithadaptation onvariouslevelstobebroughttogethertodiscussprinciplesateachleveland to investigate principles governing total systems. • History AMAM started in Montreal (Canada) in August 2000. It was organized by H. Kimura (Japan), H. Witte (Germany), G. Taga (Japan), and K. Osuka (Japan), who had agreed that having a small symposium on motion control, with people from several ?elds coming together to discuss speci?c issues, was worthwhile. Those four organizing committee members determined the scope of AMAM as follows.
Download or read book Mimesis and Sacrifice written by Marcia Pally and published by Bloomsbury Publishing. This book was released on 2019-10-17 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Central to identity, personal responsibility, economic systems, theology, and the political and military imaginaries, the practice of sacrifice has inspired, disturbed, and abused. Mimesis and Sacrifice brings together scholars from the humanities, military, business, and social sciences to examine the role that sacrifice plays in different present-day settings, from economics to gender relations. Inspired by Rene Girard's work, chapters explore (i) the extent to which the social character of human living makes us mimetic, (ii) whether mimesis necessarily leads to competitive aggression, (iii) whether aggression must be defused by aggressive sacrificial rituals-and whether all sacrifice has this aim, and (iv) the role of the “second lesson of the cross” (as Girard called it), the lesson of self-giving for others, in addressing present societal problems. By investigating sacrifice across this span of arenas and questions yet within one volume, Mimesis and Sacrifice presents a new appreciation of its influence and consequences in the world today, contributing not only to mimetic theory but to greater understanding of which societal arrangement enable us to live well together and what hobbles that goal.
Download or read book Embodied Artificial Intelligence written by Fumiya Iida and published by Springer Science & Business Media. This book was released on 2004-07-08 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originating from a Dagstuhl seminar, the collection of papers presented in this book constitutes on the one hand a representative state-of-the-art survey of embodied artificial intelligence, and on the other hand the papers identify the important research trends and directions in the field. Following an introductory overview, the 23 papers are organized into topical sections on - philosophical and conceptual issues - information, dynamics, and morphology - principles of embodiment for real-world applications - developmental approaches - artificial evolution and self-reconfiguration
Download or read book The Human Hand as an Inspiration for Robot Hand Development written by Ravi Balasubramanian and published by Springer. This book was released on 2014-01-03 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: “The Human Hand as an Inspiration for Robot Hand Development” presents an edited collection of authoritative contributions in the area of robot hands. The results described in the volume are expected to lead to more robust, dependable, and inexpensive distributed systems such as those endowed with complex and advanced sensing, actuation, computation, and communication capabilities. The twenty-four chapters discuss the field of robotic grasping and manipulation viewed in light of the human hand’s capabilities and push the state-of-the-art in robot hand design and control. Topics discussed include human hand biomechanics, neural control, sensory feedback and perception, and robotic grasp and manipulation. This book will be useful for researchers from diverse areas such as robotics, biomechanics, neuroscience, and anthropologists.
Download or read book Handbook of Biomechatronics written by Jacob Segil and published by Academic Press. This book was released on 2018-11-29 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Biomechatronics provides an introduction to biomechatronic design as well as in-depth explanations of some of the most exciting and ground-breaking biomechatronic devices in the world today. Edited by Dr. Jacob Segil and written by a team of biomechatronics experts, the work begins with broad topics concerning biomechatronic design and components, followed by more detailed discussions of specific biomechatronic devices spanning many disciplines. This book is structured into three main parts: biomechatronic design, biomechatronic components, and biomechatronic devices. The biomechatronic design chapter discusses the history of biomechatronics, conceptual design theory, biomechatronic design methods, and design tools. The next section discusses the technologies involved in the following components: sensors, actuators, and control systems. The biomechatronic devices chapters contains distinct examples of biomechatronic devices spanning visual prostheses to brain-machine interfaces. Each chapter presents the development of these biomechatronic devices followed by an in-depth discussion of the current state of the art The only book that covers biomechatronic design, components, and devices in one comprehensive text Accessible for readers in multiple areas of study, such as bioengineering, computer science, electrical engineering, mechanical engineering, and chemical engineering Includes the most recent and groundbreaking advances and work in the biomechatronics field through industry and academic contributors
Download or read book Biologically Inspired Control of Humanoid Robot Arms written by Adam Spiers and published by Springer. This book was released on 2016-05-19 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book investigates a biologically inspired method of robot arm control, developed with the objective of synthesising human-like motion dynamically, using nonlinear, robust and adaptive control techniques in practical robot systems. The control method caters to a rising interest in humanoid robots and the need for appropriate control schemes to match these systems. Unlike the classic kinematic schemes used in industrial manipulators, the dynamic approaches proposed here promote human-like motion with better exploitation of the robot’s physical structure. This also benefits human-robot interaction. The control schemes proposed in this book are inspired by a wealth of human-motion literature that indicates the drivers of motion to be dynamic, model-based and optimal. Such considerations lend themselves nicely to achievement via nonlinear control techniques without the necessity for extensive and complex biological models. The operational-space method of robot control forms the basis of many of the techniques investigated in this book. The method includes attractive features such as the decoupling of motion into task and posture components. Various developments are made in each of these elements. Simple cost functions inspired by biomechanical “effort” and “discomfort” generate realistic posture motion. Sliding-mode techniques overcome robustness shortcomings for practical implementation. Arm compliance is achieved via a method of model-free adaptive control that also deals with actuator saturation via anti-windup compensation. A neural-network-centered learning-by-observation scheme generates new task motions, based on motion-capture data recorded from human volunteers. In other parts of the book, motion capture is used to test theories of human movement. All developed controllers are applied to the reaching motion of a humanoid robot arm and are demonstrated to be practically realisable. This book is designed to be of interest to those wishing to achieve dynamics-based human-like robot-arm motion in academic research, advanced study or certain industrial environments. The book provides motivations, extensive reviews, research results and detailed explanations. It is not only suited to practising control engineers, but also applicable for general roboticists who wish to develop control systems expertise in this area.
Download or read book Advances in Computational Algorithms and Data Analysis written by Sio-Iong Ao and published by Springer Science & Business Media. This book was released on 2008-09-28 with total page 575 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Computational Algorithms and Data Analysis offers state of the art tremendous advances in computational algorithms and data analysis. The selected articles are representative in these subjects sitting on the top-end-high technologies. The volume serves as an excellent reference work for researchers and graduate students working on computational algorithms and data analysis.
Download or read book Fabricate 2020 written by Jane Burry and published by UCL Press. This book was released on 2020-04-06 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fabricate 2020 is the fourth title in the FABRICATE series on the theme of digital fabrication and published in conjunction with a triennial conference (London, April 2020). The book features cutting-edge built projects and work-in-progress from both academia and practice. It brings together pioneers in design and making from across the fields of architecture, construction, engineering, manufacturing, materials technology and computation. Fabricate 2020 includes 32 illustrated articles punctuated by four conversations between world-leading experts from design to engineering, discussing themes such as drawing-to-production, behavioural composites, robotic assembly, and digital craft.
Download or read book Action to Language via the Mirror Neuron System written by Michael A. Arbib and published by Cambridge University Press. This book was released on 2006-09-07 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, internationally recognised experts from child development, computer science, linguistics, neuroscience, primatology and robotics discuss the role of the mirror neuron system for the recognition of hand actions and the evolutionary basis for the brain mechanisms that support language.
Download or read book Wearable Robotics Challenges and Trends written by José González-Vargas and published by Springer. This book was released on 2016-10-04 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book reports on advanced topics in the areas of wearable robotics research and practice. It focuses on new technologies, including neural interfaces, soft wearable robots, sensors and actuators technologies, and discusses important regulatory challenges, as well as clinical and ethical issues. Based on the 2nd International Symposium on Wearable Robotics, WeRob2016, held October 18-21, 2016, in Segovia, Spain, the book addresses a large audience of academics and professionals working in government, industry, and medical centers, and end-users alike. It provides them with specialized information and with a source of inspiration for new ideas and collaborations. It discusses exemplary case studies highlighting practical challenges related to the implementation of wearable robots in a number of fields. One of the focus is on clinical applications, which was encouraged by the colocation of WeRob2016 with the International Conference on Neurorehabilitation, INCR2016. Additional topics include space applications and assistive technologies in the industry. The book merges together the engineering, medical, ethical and political perspectives, thus offering a multidisciplinary, timely snapshot of the field of wearable technologies.
