Download or read book Pile Foundation Analysis and Design written by H. G. Poulos and published by Krieger Publishing Company. This book was released on 1990-01-01 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Single Piles and Pile Groups Under Lateral Loading written by Lymon C. Reese and published by CRC Press. This book was released on 2010-12-15 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: The complexities of designing piles for lateral loads are manifold as there are many forces that are critical to the design of big structures such as bridges, offshore and waterfront structures and retaining walls. The loads on structures should be supported either horizontally or laterally or in both directions and most structures have in common t

Download or read book Analysis of Laterally Loaded Piles in Multilayered Soil Deposits written by Dipanjan Basu and published by Purdue University Press. This book was released on 2007-10-01 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report focuses on the development of a new method of analysis of laterally loaded piles embedded in a multi-layered soil deposit treated as a three-dimensional continuum. Assuming that soil behaves as a linear elastic material, the governing differential equations for the deflection of laterally loaded piles were obtained using energy principles and calculus of variations. The differential equations were solved using both the method of initial parameters and numerical techniques. Soil resistance, pile deflection, slope of the deflected pile, bending moment and shear force can be easily obtained at any depth along the entire pile length. The results of the analysis were in very good agreement with three-dimensional finite element analysis results. The analysis was further extended to account for soil nonlinearity. A few simple constitutive relationships that allow for modulus degradation with increasing strain were incorporated into the analysis. The interaction of piles in groups was also studied.

Download or read book Design of Pile Foundations in Liquefiable Soils written by Gopal Madabhushi and published by Imperial College Press. This book was released on 2010 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pile foundations are the most common form of deep foundations that are used both onshore and offshore to transfer large superstructural loads into competent soil strata. This book provides many case histories of failure of pile foundations due to earthquake loading and soil liquefaction. Based on the observed case histories, the possible mechanisms of failure of the pile foundations are postulated. The book also deals with the additional loading attracted by piles in liquefiable soils due to lateral spreading of sloping ground. Recent research at Cambridge forms the backbone of this book with the design methodologies being developed directly based on quantified centrifuge test results and numerical analysis. The book provides designers and practicing civil engineers with a sound knowledge of pile behaviour in liquefiable soils and easy-to-use methods to design pile foundations in seismic regions. For graduate students and researchers, it brings together the latest research findings on pile foundations in a way that is relevant to geotechnical practice. Sample Chapter(s). Foreword (85 KB). Chapter 1: Performance of Pile Foundations (4,832 KB). Contents: Performance of Pile Foundations; Inertial and Kinematic Loading; Accounting for Axial Loading in Level Ground; Lateral Spreading of Sloping Ground; Axial Loading on Piles in Laterally Spreading Ground; Design Examples. Readership: Researchers, academics, designers and graduate students in earthquake engineering, civil engineering and ocean/coastal engineering.

Download or read book Modeling in Geotechnical Engineering written by Pijush Samui and published by Academic Press. This book was released on 2020-12-01 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling in Geotechnical Engineering is a one stop reference for a range of computational models, the theory explaining how they work, and case studies describing how to apply them. Drawing on the expertise of contributors from a range of disciplines including geomechanics, optimization, and computational engineering, this book provides an interdisciplinary guide to this subject which is suitable for readers from a range of backgrounds. Before tackling the computational approaches, a theoretical understanding of the physical systems is provided that helps readers to fully grasp the significance of the numerical methods. The various models are presented in detail, and advice is provided on how to select the correct model for your application. - Provides detailed descriptions of different computational modelling methods for geotechnical applications, including the finite element method, the finite difference method, and the boundary element method - Gives readers the latest advice on the use of big data analytics and artificial intelligence in geotechnical engineering - Includes case studies to help readers apply the methods described in their own work

Download or read book Design of Piles Under Cyclic Loading written by Alain Puech and published by John Wiley & Sons. This book was released on 2017-11-29 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent developments in the fields of energy, transport and industrial engineering have led to the emergence of new types of structures and infrastructures subject to variable stresses, for which the usual methods for designing pile foundations are now inadequate. The recommendations presented in this book will help to partly fill this technical gap by proposing a methodological approach and calculation methods to take account of the effects of cyclic loads in the design of foundations on piles. These are based on both laboratory and full scale experiments, and on modeling carried out within the framework of the national SOLCYP project.

Download or read book Pile Design and Construction Practice Fifth Edition written by Michael Tomlinson and published by CRC Press. This book was released on 2007-12-06 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: This international handbook is essential for geotechnical engineers and engineering geologists responsible for designing and constructing piled foundations. It explains general principles and practice and details current types of pile, piling equipment and methods. It includes calculations of the resistance of piles to compressive loads, pile groups under compressive loading, piled foundations for resisting uplift and lateral loading and the structural design of piles and pile groups. Marine structures, miscellaneous problems (including machinery foundations, underpinning, mining subsidence areas, contracts and frozen ground), durability of piled foundations, ground investigations, and pile testing are also covered. It introduces the 2005 version of Eurocode7, BS 8004 and other codes, and refers to BS 6349 on maritime structures, and new forms of civil engineering contracts suitable for piling projects. It includes numerous worked examples to the codes, many based on actual problems. It also gives very comprehensive information for students.

Download or read book Advanced Design of Pile Foundations Under Lateral Loading written by Wei Dong Guo and published by CRC Press. This book was released on 2023-12-15 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents models that capture the nonlinear response of piles subjected to lateral forces. Utilising a consistent approach encompassing new mathematical models, it offers solutions presented as closed-form expressions and underpinned by the same set of 3-5 measurable soil-input parameters. These focus on nonlinear response of mono piles, anchored piles, pile groups, and torsional piles, as well as passive piles subjected to soil movement induced in shearing, sliding slopes or excavation, and earthquake shaking. The models can also be used for pipelines and similar beam structures. Solutions are provided in the form of design charts, with each parameter obtained using available test data and illustrated with real-world cases. The models reveal, for the first time, the mysterious mechanisms of amplification resulting from back-rotation, which have incurred the collapse of structures such as the Showa Bridge and Nicoll Highway, as well as the distortion of piles during earthquakes. Advanced Design of Pile Foundations Under Lateral Loading is ideal for practicing foundation engineers and students at graduate level. Wei Dong Guo is co-founder of Hans Innovation Group and former Associate Professor at the University of Wollongong, Australia. He is a Chartered Professional Engineer and is a Fellow of Engineers Australia by whom he was awarded the 2012 Warren Medal.

Download or read book Pile groups under cyclic lateral loading written by Christoph Niemann and published by BoD – Books on Demand. This book was released on 2020-01-01 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is the aim of this research work is to investigate and to assess quatitatively as well as quantitatively the bearing behaviour of pile groups subjected to cyclic lateral loading. In this context, the influences of different boundary conditions, in particular the soil properties and the pile group geometry are to be analysed experimentally and numerically. Based on a brief literature review in chapter 2, model tests (centrifuge and small-scale at 1g) and numerical investigations have been carried out to contribute to a better understanding of the cyclic behaviour of pile groups. Chapter 3 describes the test procedure and summarises the results of centrifuge tests, which have been carried out at the Centre for Offshore Foundation Systems (COFS) in Perth, Australia. Further investigations have been carried out by means of smallscale model tests at 1g in the testing facilities at the University of Kassel, Germany, with the results as summarised in chapter 4. A comparison of individual results of both test series is provided in chapter 5. The numerical studies in chapter 6 have been carried out in order to analyse the general ability of numerical simulations to calculate the response of pile groups to cyclic lateral loading. Based on the previously derived results, chapter 7 provides equations that can be applied to estimate the cyclic accumulation of lateral displacements of pile groups as well as the cyclic changes of the load distribution within pile groups.

Download or read book The Pressuremeter written by Jean-Louis Briaud and published by Routledge. This book was released on 2019-07-16 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic title deals presents all one needs to know about pressuremeter test, a soil and rock test used in civil engineering. It consists of placing a cylindrical probe in the ground and expanding the probe to pressurize the soil or the rock horizontally. The pressure on the soil and the relative increase in cavity radius are obtained and give an in situ stress strain curve. The pressuremeter test is repeated at various depths in order to obtain profiles of soil parameters. The design applications of the preboring pressuremeter test include: shallow foundations under vertical loads, deep foundations under vertical and horizontal loads, ground anchors, cantilever drilled shaft walls and anchored bulkheads, pavements, stone columns, ground improvement and compaction control.

Download or read book Piling Engineering written by Ken Fleming and published by CRC Press. This book was released on 1994-03-17 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Piling is a fast-moving field and in recent years there have been major advances in theory, methods, testing procedures and equipment. Some of these changes have been driven by the need for economies by improved efficiency, reduced spoil production and new methods of pile bore support. Advances in theoretical analyses allow pile design to be refined so that piles and pile groups perform to better advantage.

Download or read book Theory and Practice of Pile Foundations written by Wei Dong Guo and published by CRC Press. This book was released on 2012-11-14 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pile Foundations are an essential basis for many structures. It is vital that they be designed with the utmost reliability, because the cost of failure is potentially huge. Covering a whole range of design issues relating to pile design, this book presents economical and efficient design solutions and demonstrates them using real world examples. Coverage includes nonlinear response of single piles to vertical or torsional loading and to cyclic lateral loading, as well as prediction of nonlinear response of lateral pile groups, vertically loaded pile groups and the design of slope stabilising piles. Most solutions are provided as closed-form expressions. Theory and Practice of Pile Foundations is: illustrated with case studies accompanied by practical applications in Excel and MathCad the first book to incorporate nonlinear interaction into pile design. A valuable resource for students of geotechnical engineering taking courses in foundations and a vital tool for engineers designing pile foundations.

Download or read book Dynamics of Soil and Modelling of Geotechnical Problems written by C. N. V. Satyanarayana Reddy and published by Springer Nature. This book was released on 2022-01-17 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides information on the latest technological developments taking place in Geotechnical engineering, pertaining to Soil Dynamics and Modelling of Geotechnical Problems. The book is useful for the academicians and working professionals with coverage of both theoretical and practical aspects of Dynamics of Soil and Modelling studies on Geotechnical problems based on research findings and site specific inputs. The book serves as a useful reference resource for graduate and postgraduate students of civil engineering and contents of the book are helpful to the postgraduate students and research scholars in carrying out the research.

Download or read book Modern Trends in Geomechanics written by Wei Wu and published by Springer Science & Business Media. This book was released on 2006-11-22 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is loaded with rich and stimulating articles by a roster of brilliant scholars, reflecting some recent trends in the frontier research of geomechanics. This collection of 32 contributions stems from an international workshop on "Modern Trends of Geomechanics" held in Vienna. The contributions span a wide range of topics and an enormous range of physical scales, from micromechanics at grain scale to engineering problems at large scale; from laboratory and field testing over constitutive modelling to numerical analysis. The key features of this book are: thermodynamics, multiphase continua and transport phenomena; constitutive modelling, localized bifurcation, micropolar theory, unsaturated soil, viscous and cyclic behaviour; numerical and analytical methods; discrete element method, micromechanics, grain crushing and damage; laboratory and field testing, foundation and mining engineering. This book will be rewarding for anyone interested in the frontier research in geomechanics and geotechnical engineering, appealing to graduate students, researchers and engineers alike.

Download or read book Laterally Loaded Deep Foundations written by James A. Langer and published by ASTM International. This book was released on 1984 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Offshore Geotechnics written by Sumanta Haldar and published by Springer Nature. This book was released on 2020-09-03 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select proceedings of the First Indian Symposium on Offshore Geotechnics. It addresses state of the art and emerging challenges in offshore design and construction. The theme papers from leading academicians and practitioners provide a comprehensive overview of the broad topics encompassing various challenges in offshore geotechnical engineering. It covers various aspects pertaining to offshore geotechnics, such as offshore site investigation, soil characterization, geotechnics related to offshore renewable energy converters, offshore foundations and anchoring systems, pipelines, and deep sea explorations. This volume provides a comprehensive reference for professionals and researchers in offshore, civil and maritime engineering and for soil mechanics specialists.

Download or read book Geotechnical Centrifuge Technology written by R.N. Taylor and published by CRC Press. This book was released on 2003-09-02 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough review of this powerful and sophisticated technique for modelling soil structure interactions. It has been written by an international team of authors.