Download or read book Battery Pack Life Estimation through Cell Degradation Data and Pack Thermal Modeling for BAS Li Ion Batteries Cooperative Research and Development Final Report CRADA Number CRD 12 489 written by and published by . This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Battery Life estimation is one of the key inputs required for Hybrid applications for all GM Hybrid/EV/EREV/PHEV programs. For each Hybrid vehicle program, GM has instituted multi-parameter Design of Experiments generating test data at Cell level and also Pack level on a reduced basis. Based on experience, generating test data on a pack level is found to be very expensive, resource intensive and sometimes less reliable. The proposed collaborative project will focus on a methodology to estimate Battery life based on cell degradation data combined with pack thermal modeling. NREL has previously developed cell-level battery aging models and pack-level thermal/electrical network models, though these models are currently not integrated. When coupled together, the models are expected to describe pack-level thermal and aging response of individual cells. GM and NREL will use data collected for GM's Bas+ battery system for evaluation of the proposed methodology and assess to what degree these models can replace pack-level aging experiments in the future.

Download or read book Platform Li Ion Battery Risk Assessment Tool Cooperative Research and Development Final Report CRADA Number CRD 10 407 written by and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Creare was awarded a Phase 1 STTR contract from the US Office of Naval Research, with a seven month period of performance from 6/28/2010 to 1/28/2011. The objectives of the STTR were to determine the feasibility of developing a software package for estimating reliability of battery packs, and develop a user interface to allow the designer to assess the overall impact on battery packs and hostplatforms for cell-level faults. NREL served as sub-tier partner to Creare, providing battery modeling and battery thermal safety expertise.

Download or read book Data Science Based Full Lifespan Management of Lithium Ion Battery written by Kailong Liu and published by Springer Nature. This book was released on 2022-04-08 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book comprehensively consolidates studies in the rapidly emerging field of battery management. The primary focus is to overview the new and emerging data science technologies for full-lifespan management of Li-ion batteries, which are categorized into three groups, namely (i) battery manufacturing management, (ii) battery operation management, and (iii) battery reutilization management. The key challenges, future trends as well as promising data-science technologies to further improve this research field are discussed. As battery full-lifespan (manufacturing, operation, and reutilization) management is a hot research topic in both energy and AI fields and none specific book has focused on systematically describing this particular from a data science perspective before, this book can attract the attention of academics, scientists, engineers, and practitioners. It is useful as a reference book for students and graduates working in related fields. Specifically, the audience could not only get the basics of battery manufacturing, operation, and reutilization but also the information of related data-science technologies. The step-by-step guidance, comprehensive introduction, and case studies to the topic make it accessible to audiences of different levels, from graduates to experienced engineers.

Download or read book Long Term Health State Estimation of Energy Storage Lithium Ion Battery Packs written by Qi Huang and published by Springer Nature. This book was released on 2023-08-18 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book investigates in detail long-term health state estimation technology of energy storage systems, assessing its potential use to replace common filtering methods that constructs by equivalent circuit model with a data-driven method combined with electrochemical modeling, which can reflect the battery internal characteristics, the battery degradation modes, and the battery pack health state. Studies on long-term health state estimation have attracted engineers and scientists from various disciplines, such as electrical engineering, materials, automation, energy, and chemical engineering. Pursuing a holistic approach, the book establishes a fundamental framework for this topic, while emphasizing the importance of extraction for health indicators and the significant influence of electrochemical modeling and data-driven issues in the design and optimization of health state estimation in energy storage systems. The book is intended for undergraduate and graduate students who are interested in new energy measurement and control technology, researchers investigating energy storage systems, and structure/circuit design engineers working on energy storage cell and pack.

Download or read book American Made Challenges Battery Voucher Program Cooperative Research and Development Agreement Cooperative Research and Development Final Report CRADA Number CRD 21 17533 written by and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Renewance is a Phase II winner of the U.S. Department of Energy Lithium-ion Battery Recycling Prize. The Prize is designed to incentivize American entrepreneurs to develop and demonstrate processes that, when scaled, have the potential to profitably capture 90% of all discarded or spent lithium-based batteries (LIB) in the Unites States for eventual recovery of key materials for re-introductions into the U.S. supply chain. The objective of this work is to enable a more efficient evaluation of battery sources for second life applications prior to ultimately being recycled, through evaluation of chemistry characteristics, projected battery lifetime, and application history. This work will develop the capability to identify groups of batteries that may be useful for second life and reduce the cost of end-of-life (EOL) LIB evaluation and repurposing. To meet the objective, NREL will use existing and new data to create a refined algorithm that could be used to evaluate batches of batteries for potential reuse based on manufacturing date and historical use characteristics. Based on current battery market prices and compiled literature data, a starting-point estimate of the market value of the batteries for reuse based on expected lifetime will be included in the algorithm. With the projected surge in LIB demand, battery second life is a new area ripe for development and investment from companies like Renewance. With so few large format batteries reaching EOL to date, this is a new market with a variety of areas for optimization and adding value. This work with Renewance is an example of how existing expertise in battery degradation at NREL can be used to reduce the cost of shifting a battery into a second life application. With these cost reductions, this work is also facilitating the development of a battery circular economy in the United States. A robust circular economy can maximize the utilization of critical metals demanded by battery technology such as nickel and cobalt while also reducing the costs of batteries in the marketplace for the many end-uses needed for the green energy transition. The supply of these metals is limited, and we face a supply chain shortage both domestically and globally unless we can ensure they are being used to their maximum potential. This research can improve the economics of a battery circular economy to make it a more likely path for EOL batteries with critical metals. CRADA benefit to DOE, Participant, and US Taxpayer: assists laboratory in achieving programmatic scope competencies, uses the laboratory's core competencies.

Download or read book Modeling and State Estimation of Automotive Lithium Ion Batteries written by Shunli Wang and published by CRC Press. This book was released on 2024-07-16 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to evaluate and improve the state of charge (SOC) and state of health (SOH) of automotive lithium-ion batteries. The authors first introduce the basic working principle and dynamic test characteristics of lithium-ion batteries. They present the dynamic transfer model, compare it with the traditional second-order reserve capacity (RC) model, and demonstrate the advantages of the proposed new model. In addition, they propose the chaotic firefly optimization algorithm and demonstrate its effectiveness in improving the accuracy of SOC and SOH estimation through theoretical and experimental analysis. The book will benefit researchers and engineers in the new energy industry and provide students of science and engineering with some innovative aspects of battery modeling.

Download or read book Modeling and Simulation of Lithium ion Power Battery Thermal Management written by Junqiu Li and published by Springer Nature. This book was released on 2022-05-09 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the thermal management technology of lithium-ion batteries for vehicles. It introduces the charging and discharging temperature characteristics of lithium-ion batteries for vehicles, the method for modeling heat generation of lithium-ion batteries, experimental research and simulation on air-cooled and liquid-cooled heat dissipation of lithium-ion batteries, lithium-ion battery heating method based on PTC and wide-line metal film, self-heating using sinusoidal alternating current. This book is mainly for practitioners in the new energy vehicle industry, and it is suitable for reading and reference by researchers and engineering technicians in related fields such as new energy vehicles, thermal management and batteries. It can also be used as a reference book for undergraduates and graduate students in energy and power, electric vehicles, batteries and other related majors.

Download or read book Advances in Lithium Ion Batteries for Electric Vehicles written by Haifeng Dai and published by Elsevier. This book was released on 2024-02-15 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Lithium-Ion Batteries for Electric Vehicles: Degradation Mechanism, Health Estimation, and Lifetime Prediction examines the electrochemical nature of lithium-ion batteries, including battery degradation mechanisms and how to manage the battery state of health (SOH) to meet the demand for sustainable development of electric vehicles. With extensive case studies, methods and applications, the book provides practical, step-by-step guidance on battery tests, degradation mechanisms, and modeling and management strategies. The book begins with an overview of Li-ion battery aging and battery aging tests before discussing battery degradation mechanisms and methods for analysis. Further methods are then presented for battery state of health estimation and battery lifetime prediction, providing a range of case studies and techniques. The book concludes with a thorough examination of lifetime management strategies for electric vehicles, making it an essential resource for students, researchers, and engineers needing a range of approaches to tackle battery degradation in electric vehicles. - Evaluates the cause of battery degradation from the material level to the cell level - Explains key battery basic lifetime test methods and strategies - Presents advanced technologies of battery state of health estimation

Download or read book Improved Battery Pack Thermal Management to Reduce Cost and Increase Energy Density Cooperative Research and Development Final Report CRADA Number CRD 12 499 written by and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Under this CRADA NREL will support Creare's project for the Department of Energy entitled 'Improved Battery Pack Thermal Management to Reduce Cost and Increase Energy Density' which involves the development of an air-flow based cooling product that increases energy density, safety, and reliability of hybrid electric vehicle battery packs.

Download or read book Battery Performance Thermal and Life Modeling for Southern California Edison Cooperative Research and Development Final Report CRADA Number CRD 17 00656 written by and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this project is to develop battery performance models, thermal models and life models for SCE to use in simulation and analysis of grid services involving energy storage. NREL will fit the models to three separate chemistries using test data provided by SCE. The dataset for each chemistry will include electrical, thermal and aging response to different temperatures and cycling conditions, measured under a variety of cell-level and module-level experiments described in SCE test protocol documents. Once tuned to a test dataset, the battery system model software will provide predictions of battery energy and power loss, and thus cycle and calendar life, for any energy storage grid service power profile of interest to SCE. The automated battery life modeling and simulation tool can also be applied to any other grid battery systems as long as necessary input data is available to accelerate battery model development and battery lifetime analysis.

Download or read book Platform Li Ion Battery Risk Assessment Tool Cooperative Research and Development Final Report CRADA Number CRD 01 406 written by and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The pressure within a lithium-ion cell changes due to various chemical reactions. When a battery undergoes an unintended short circuit, the pressure changes are drastic - and often lead to uncontrolled failure of the cells. As part of work for others with Oceanit Laboratories Inc. for the NAVY STTR, NREL built Computational Fluid Dynamic (CFD) simulations that can identify potential weak spots inthe battery during such events, as well as propose designs to control violent failure of batteries.

Download or read book Multidimensional Lithium Ion Battery Status Monitoring written by Shunli Wang and published by CRC Press. This book was released on 2022-12-28 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multidimensional Lithium-Ion Battery Status Monitoring focuses on equivalent circuit modeling, parameter identification, and state estimation in lithium-ion battery power applications. It explores the requirements of high-power lithium-ion batteries for new energy vehicles and systematically describes the key technologies in core state estimation based on battery equivalent modeling and parameter identification methods of lithium-ion batteries, providing a technical reference for the design and application of power lithium-ion battery management systems. Reviews Li-ion battery characteristics and applications. Covers battery equivalent modeling, including electrical circuit modeling and parameter identification theory Discusses battery state estimation methods, including state of charge estimation, state of energy prediction, state of power evaluation, state of health estimation, and cycle life estimation Introduces equivalent modeling and state estimation algorithms that can be applied to new energy measurement and control in large-scale energy storage Includes a large number of examples and case studies This book has been developed as a reference for researchers and advanced students in energy and electrical engineering.

Download or read book Techno Economic Impact of a Smart Battery Sorting System Cooperative Research and Development Final Report CRADA Number CRD 21 17531 written by and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Create analytical framework to capture costs and benefits of the automated sorting into battery recycling including the development and deployment of various types of battery recycling technologies such as pyrometallurgical, hydrometallurgical, and direct recycling. Li Industries, Inc. is a Virginia startup company focused on reinventing how lithium-ion batteries (LIBs) are recycled. Li Industries is focused on developing direct LIB recycling and automated battery sorting technologies in order to reduce the environmental impact of the LIB lifecycle. This work is to be conducted in support of the American-Made Challenges Lithium-Ion Battery Recycling Prize. Li Industries and NREL will work together to understand how novel technologies, such as those being developed by Li Industries, can impact the development and economics of the battery recycling industry. This voucher is being used to evaluate the profitability of an automated sorting system developed by Li Industries and the potential effect this increased value could have on the domestic lithium-ion battery (LIB) recycling industries in the United States. NREL has developed the Lithium-Ion Battery Resources Assessment (LIBRA) system dynamics model to project the future viability of the US LIB manufacturing and recycling industries under varying technoeconomic conditions and battery adoption scenarios over the coming decades. Additional logic was added to LIBRA to analyze the role automated sorting of recycling feedstock could play in the buildout of the industry and the impacts it has on the recovery of end-of-life (EOL) battery materials. This report summarizes the outcomes of this modeling analysis in the US context through a series of sensitivity analyses run for a range of values of a given input dimension and compared across the unsorted or automated sorting cases for LIB recycling feedstock. For greater detail on the process and analysis, the researchers are publishing a forthcoming journal article titled Techno-Economic Impact of a Smart Battery Sorting System for Lithium-Ion Battery Recycling and Mineral Recovery in the United States by Weigl, et al. In the event the article is not accepted by any currently seeking publication in academic or industry journal, it may be published by NREL. CRADA benefit to DOE, Participant, and US Taxpayer: assists laboratory in achieving programmatic scope competencies, uses the laboratory's core competencies.

Download or read book Multiscale Modeling of Degradation in Lithium ion Batteries written by Fridolin Röder and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive methodology for multiscale simulation of degradation in lithium-ion batteries. The work helps to understand battery degradation processes by revealing complex multiscale effects, which cannot be taken into account by single-scale models. A novel numerical method is presented, which dynamically couples molecular models based on kinetic Monte Carlo method with macroscopic models. Moreover, the work provides mathematical models of degradation on various length scales, e.g. heterogeneous side reactions on molecular scale and the restructuring of particle size distributions on electrode scale. Instead of describing processes separately, the multiscale methodology systematically analyzes interaction of degradation processes and cell operation. The presented methodology is certainly applicable to other electrochemical systems with considerable multi-scale nature.

Download or read book Multi node Thermal System Model for Lithium ion Battery Packs written by Ying Shi and published by . This book was released on 2015 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: Temperature is one of the main factors that controls the degradation in lithium ion batteries. Accurate knowledge and control of cell temperatures in a pack helps the battery management system (BMS) to maximize cell utilization and ensure pack safety and service life. In a pack with arrays of cells, a cells temperature is not only affected by its own thermal characteristics but also by its neighbors, the cooling system and pack configuration, which increase the noise level and the complexity of cell temperatures prediction. This work proposes to model lithium ion packs thermal behavior using a multi-node thermal network model, which predicts the cell temperatures by zones. The model was parametrized and validated using commercial lithium-ion battery packs. neighbors, the cooling system and pack configuration, which increase the noise level and the complexity of cell temperatures prediction. This work proposes to model lithium ion packs thermal behavior using a multi-node thermal network model, which predicts the cell temperatures by zones. The model was parametrized and validated using commercial lithium-ion battery packs.

Download or read book Modeling and State Estimation of Lithium Ion Battery Packs for Application in Battery Management Systems written by Manoj Mathew and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: As lithium-ion (Li-Ion) battery packs grow in popularity, so do the concerns of its safety, reliability, and cost. An efficient and robust battery management system (BMS) can help ease these concerns. By measuring the voltage, temperature, and current for each cell, the BMS can balance the battery pack, and ensure it is operating within the safety limits. In addition, these measurements can be used to estimate the remaining charge in the battery (state-of-charge (SOC)) and determine the health of the battery (state-of-health (SOH)). Accurate estimation of these battery and system variables can help improve the safety and reliability of the energy storage system (ESS). This research aims to develop high-fidelity battery models and robust SOC and SOH algorithms that have low computational cost and require minimal training data. More specifically, this work will focus on SOC and SOH estimation at the pack-level, as well as modeling and simulation of a battery pack. An accurate and computationally efficient Li-Ion battery model can be highly beneficial when developing SOC and SOH algorithms on the BMS. These models allow for software-in-the-loop (SIL) and hardware-in-the-loop (HIL) testing, where the battery pack is simulated in software. However, development of these battery models can be time-consuming, especially when trying to model the effect of temperature and SOC on the equivalent circuit model (ECM) parameters. Estimation of this relationship is often accomplished by carrying out a large number of experiments, which can be too costly for many BMS manufacturers. Therefore, the first contribution of this research is to develop a comprehensive battery model, where the ECM parameter surface is generated using a set of carefully designed experiments. This technique is compared with existing approaches from literature, and it is shown that by using the proposed method, the same degree of accuracy can be obtained while requiring significantly less experimental runs. This can be advantageous for BMS manufacturers that require a high-fidelity model but cannot afford to carry out a large number of experiments. Once a comprehensive model has been developed for SIL and HIL testing, research was carried out in advancing SOH and SOC algorithms. With respect to SOH, research was conducted in developing a steady and reliable SOH metric that can be determined at the cell level and is stable at different battery operating conditions. To meet these requirements, a moving window direct resistance estimation (DRE) algorithm is utilized, where the resistance is estimated only when the battery experiences rapid current transients. The DRE approach is then compared with more advanced resistance estimation techniques such as extended Kalman filter (EKF) and recursive least squares (RLS). It is shown that by using the proposed algorithm, the same degree of accuracy can be achieved as the more advanced methods. The DRE algorithm does, however, have a much lower computational complexity and therefore, can be implemented on a battery pack composed of hundreds of cells. Research has also been conducted in converting these raw resistance values into a stable SOH metric. First, an outlier removal technique is proposed for removing any outliers in the resistance estimates; specifically, outliers that are an artifact of the sampling rate. The technique involves using an adaptive control chart, where the bounds on the control chart change as the internal resistance of the battery varies during operation. An exponentially weighted moving average (EWMA) is then applied to filter out the noise present in the raw estimates. Finally, the resistance values are filtered once more based on temperature and battery SOC. This additional filtering ensures that the SOH value is independent of the battery operating conditions. The proposed SOH framework was validated over a 27-day period for a lithium iron phosphate (LFP) battery. The results show an accurate estimation of battery resistance over time with a mean error of 1.1% as well as a stable SOH metric. The findings are significant for BMS developers who have limited computational resources but still require a robust and reliable SOH algorithm. Concerning SOC, most publications in literature examine SOC estimation at the cell level. Determining the SOC for a battery pack can be challenging, especially an estimate that behaves logically to the battery user. This work proposes a three-level approach, where the final output from the algorithm is a well-behaved pack SOC estimate. The first level utilizes an EKF for estimating SOC while an RLS approach is used to adapt the model parameters. To reduce computational time, both algorithms will be executed on two specific cells: the first cell to charge to full and the first cell to discharge to empty. The second level consists of using the SOC estimates from these two cells and estimating a pack SOC value. Finally, a novel adaptive coulomb counting approach is proposed to ensure the pack SOC estimate behaves logically. The accuracy of the algorithm is tested using a 40 Ah Li-Ion battery. The results show that the algorithm produces accurate and stable SOC estimates. Finally, this work extends the developed comprehensive battery model to examine the effect of replacing damaged cells in a battery pack with new ones. The cells within the battery pack vary stochastically, and the performance of the entire pack is evaluated under different conditions. The results show that by changing out cells in the battery pack, the SOH of the pack can be maintained indefinitely above a specific threshold value. In situations where the cells are checked for replacement at discrete intervals, referred to as maintenance event intervals, it is found that the length of the interval is dependent on the mean time to failure of the individual cells. The simulation framework, as well as the results from this paper, can be utilized to better optimize Li-ion battery pack design in electric vehicles (EVs) and make long-term deployment of EVs more economically feasible.

Download or read book Lifetime Prediction on Lithium ion Battery Cell and System Level written by Severin Lukas Hahn and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: