Download or read book Basic Structured Grid Generation written by M Farrashkhalvat and published by Elsevier. This book was released on 2003-02-11 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finite element, finite volume and finite difference methods use grids to solve the numerous differential equations that arise in the modelling of physical systems in engineering. Structured grid generation forms an integral part of the solution of these procedures. Basic Structured Grid Generation provides the necessary mathematical foundation required for the successful generation of boundary-conforming grids and will be an important resource for postgraduate and practising engineers.The treatment of structured grid generation starts with basic geometry and tensor analysis before moving on to identify the variety of approaches that can be employed in the generation of structured grids. The book then introduces unstructured grid generation by explaining the basics of Delaunay triangulation and advancing front techniques. A practical, straightforward approach to this complex subject for engineers and students. A key technique for modelling physical systems.
Download or read book Handbook of Grid Generation written by Joe F. Thompson and published by CRC Press. This book was released on 1998-12-29 with total page 1136 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Grid Generation addresses the use of grids (meshes) in the numerical solutions of partial differential equations by finite elements, finite volume, finite differences, and boundary elements. Four parts divide the chapters: structured grids, unstructured girds, surface definition, and adaption/quality. An introduction to each section provides a roadmap through the material. This handbook covers: Fundamental concepts and approaches Grid generation process Essential mathematical elements from tensor analysis and differential geometry, particularly relevant to curves and surfaces Cells of any shape - Cartesian, structured curvilinear coordinates, unstructured tetrahedra, unstructured hexahedra, or various combinations Separate grids overlaid on one another, communicating data through interpolation Moving boundaries and internal interfaces in the field Resolving gradients and controlling solution error Grid generation codes, both commercial and freeware, as well as representative and illustrative grid configurations Handbook of Grid Generation contains 37 chapters as well as contributions from more than 100 experts from around the world, comprehensively evaluating this expanding field and providing a fundamental orientation for practitioners.
Download or read book Grid Generation Methods written by Vladimir D. Liseikin and published by Springer Science & Business Media. This book was released on 2013-04-18 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is an introduction to methods of grid generation technology in scientific computing. Special attention is given to methods developed by the author for the treatment of singularly-perturbed equations, e.g. in modeling high Reynolds number flows. Functionals of conformality, orthogonality, energy and alignment are discussed.
Download or read book Grid Generation Methods written by Vladimir D. Liseikin and published by Springer Science & Business Media. This book was released on 2009-10-27 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is an introduction to methods of grid generation technology in scientific computing. Special attention is given to methods developed by the author for the treatment of singularly-perturbed equations, e.g. in modeling high Reynolds number flows. Functionals of conformality, orthogonality, energy and alignment are discussed.
Download or read book Fundamentals of Grid Generation written by Patrick Knupp and published by CRC Press. This book was released on 2020-12-17 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Grid Generation is an outstanding text/reference designed to introduce students in applied mathematics, mechanical engineering, and aerospace engineering to structured grid generation. It provides excellent reference material for practitioners in industry, and it presents new concepts to researchers. Readers will learn what boundary-conforming grids are, how to generate them, and how to devise their own methods. The text is written in a clear, intuitive style that doesn't get bogged down in unnecessary abstractions. Topics covered include planar, surface, and 3-D grid generation; numerical techniques; solution adaptivity; the finite volume approach to discretization of hosted equations; concepts from elementary differential geometry; and the transformation of differential operators to general coordinate systems. The book also reviews the literature on algebraic, conformal, orthogonal, hyperbolic, parabolic, elliptic, biharmonic, and variational approaches to grid generation. This unique volume closes with the author's original methods of variational grid generation.
Download or read book Structured Grid Generation written by Miles and published by . This book was released on 2000-07 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Computational Differential Geometry Approach to Grid Generation written by Vladimir D. Liseikin and published by Springer Science & Business Media. This book was released on 2006-09-12 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: The process of breaking up a physical domain into smaller sub-domains, known as meshing, facilitates the numerical solution of partial differential equations used to simulate physical systems. In an updated and expanded Second Edition, this monograph gives a detailed treatment based on the numerical solution of inverted Beltramian and diffusion equations with respect to monitor metrics for generating both structured and unstructured grids in domains and on surfaces.
Download or read book Fundamentals of Grid Generation written by Patrick M. Knupp and published by . This book was released on 1993 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Grid Generation is an outstanding text/reference designed to introduce students in applied mathematics, mechanical engineering, and aerospace engineering to structured grid generation. It provides excellent reference material for practitioners in industry, and it presents new concepts to researchers. Readers will learn what boundary-conforming grids are, how to generate them, and how to devise their own methods. The text is written in a clear, intuitive style that doesn't get bogged down in unnecessary abstractions. Topics covered include planar, surface, and 3-D grid generation; numerical techniques; solution adaptivity; the finite volume approach to discretization of hosted equations; concepts from elementary differential geometry; and the transformation of differential operators to general coordinate systems. The book also reviews the literature on algebraic, conformal, orthogonal, hyperbolic, parabolic, elliptic, biharmonic, and variational approaches to grid generation. This unique volume closes with the author's original methods of variational grid generation.
Download or read book Introduction to Computational Fluid Dynamics written by Anil W. Date and published by Cambridge University Press. This book was released on 2005-08-08 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Computational Fluid Dynamics is a textbook for advanced undergraduate and first year graduate students in mechanical, aerospace and chemical engineering. The book emphasizes understanding CFD through physical principles and examples. The author follows a consistent philosophy of control volume formulation of the fundamental laws of fluid motion and energy transfer, and introduces a novel notion of 'smoothing pressure correction' for solution of flow equations on collocated grids within the framework of the well-known SIMPLE algorithm. The subject matter is developed by considering pure conduction/diffusion, convective transport in 2-dimensional boundary layers and in fully elliptic flow situations and phase-change problems in succession. The book includes chapters on discretization of equations for transport of mass, momentum and energy on Cartesian, structured curvilinear and unstructured meshes, solution of discretised equations, numerical grid generation and convergence enhancement. Practising engineers will find this particularly useful for reference and for continuing education.
Download or read book Delaunay Mesh Generation written by Siu-Wing Cheng and published by CRC Press. This book was released on 2016-04-19 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by authors at the forefront of modern algorithms research, Delaunay Mesh Generation demonstrates the power and versatility of Delaunay meshers in tackling complex geometric domains ranging from polyhedra with internal boundaries to piecewise smooth surfaces. Covering both volume and surface meshes, the authors fully explain how and why thes
Download or read book An Unstructured Grid Generation and Adaptive Solution Technique for High Reynolds number Compressible Flows written by Gregory Allan Ashford and published by . This book was released on 1996 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Fluid Dynamics written by Jiri Blazek and published by Elsevier. This book was released on 2005-12-20 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Fluid Dynamics (CFD) is an important design tool in engineering and also a substantial research tool in various physical sciences as well as in biology. The objective of this book is to provide university students with a solid foundation for understanding the numerical methods employed in today’s CFD and to familiarise them with modern CFD codes by hands-on experience. It is also intended for engineers and scientists starting to work in the field of CFD or for those who apply CFD codes. Due to the detailed index, the text can serve as a reference handbook too. Each chapter includes an extensive bibliography, which provides an excellent basis for further studies.
Download or read book Finite Element Mesh Generation written by Daniel S.H. Lo and published by CRC Press. This book was released on 2015-01-15 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: Highlights the Progression of Meshing Technologies and Their Applications Finite Element Mesh Generation provides a concise and comprehensive guide to the application of finite element mesh generation over 2D domains, curved surfaces, and 3D space. Organised according to the geometry and dimension of the problem domains, it develops from the basic meshing algorithms to the most advanced schemes to deal with problems with specific requirements such as boundary conformity, adaptive and anisotropic elements, shape qualities, and mesh optimization. It sets out the fundamentals of popular techniques, including: Delaunay triangulation Advancing-front (ADF) approach Quadtree/Octree techniques Refinement and optimization-based strategies From the geometrical and the topological aspects and their associated operations and inter-relationships, each approach is vividly described and illustrated with examples. Beyond the algorithms, the book also explores the practice of using metric tensor and surface curvatures for generating anisotropic meshes on parametric space. It presents results from research including 3D anisotropic meshing, mesh generation over unbounded domains, meshing by means of intersection, re-meshing by Delaunay-ADF approach, mesh refinement and optimization, generation of hexahedral meshes, and large scale and parallel meshing, along with innovative unpublished meshing methods. The author provides illustrations of major meshing algorithms, pseudo codes, and programming codes in C++ or FORTRAN. Geared toward research centers, universities, and engineering companies, Finite Element Mesh Generation describes mesh generation methods and fundamental techniques, and also serves as a valuable reference for laymen and experts alike.
Download or read book Progress in Grid Generation written by Meng-Sing Liou and published by . This book was released on 1994 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Finite Volume Method in Computational Fluid Dynamics written by F. Moukalled and published by Springer. This book was released on 2015-08-13 with total page 799 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook explores both the theoretical foundation of the Finite Volume Method (FVM) and its applications in Computational Fluid Dynamics (CFD). Readers will discover a thorough explanation of the FVM numerics and algorithms used for the simulation of incompressible and compressible fluid flows, along with a detailed examination of the components needed for the development of a collocated unstructured pressure-based CFD solver. Two particular CFD codes are explored. The first is uFVM, a three-dimensional unstructured pressure-based finite volume academic CFD code, implemented within Matlab. The second is OpenFOAM®, an open source framework used in the development of a range of CFD programs for the simulation of industrial scale flow problems. With over 220 figures, numerous examples and more than one hundred exercise on FVM numerics, programming, and applications, this textbook is suitable for use in an introductory course on the FVM, in an advanced course on numerics, and as a reference for CFD programmers and researchers.
Download or read book Modeling Mesh Generation and Adaptive Numerical Methods for Partial Differential Equations written by Ivo Babuska and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: With considerations such as complex-dimensional geometries and nonlinearity, the computational solution of partial differential systems has become so involved that it is important to automate decisions that have been normally left to the individual. This book covers such decisions: 1) mesh generation with links to the software generating the domain geometry, 2) solution accuracy and reliability with mesh selection linked to solution generation. This book is suited for mathematicians, computer scientists and engineers and is intended to encourage interdisciplinary interaction between the diverse groups.
Download or read book Mathematical Aspects of Numerical Grid Generation written by Jose E. Castillo and published by SIAM. This book was released on 1991-01-01 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: The mathematical aspects of grid generation are discussed to provide a deeper understanding of the algorithms and their imitations.
