Download or read book Containing the Threat from Illegal Bombings written by National Research Council and published by National Academies Press. This book was released on 1998-06-27 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: In response to the rising concern of the American public over illegal bombings, the Bureau of Alcohol, Tobacco, and Firearms asked the National Research Council to examine possible mechanisms for reducing this threat. The committee examined four approaches to reducing the bombing threat: addition of detection markers to explosives for pre-blast detection, addition of identification taggants to explosives for post-blast identification of bombers, possible means to render common explosive materials inert, and placing controls on explosives and their precursors. The book makes several recommendations to reduce the number of criminal bombings in this country.

Download or read book Reducing the Threat of Improvised Explosive Device Attacks by Restricting Access to Explosive Precursor Chemicals written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2018-05-19 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: Improvised explosive devices (IEDs) are a type of unconventional explosive weapon that can be deployed in a variety of ways, and can cause loss of life, injury, and property damage in both military and civilian environments. Terrorists, violent extremists, and criminals often choose IEDs because the ingredients, components, and instructions required to make IEDs are highly accessible. In many cases, precursor chemicals enable this criminal use of IEDs because they are used in the manufacture of homemade explosives (HMEs), which are often used as a component of IEDs. Many precursor chemicals are frequently used in industrial manufacturing and may be available as commercial products for personal use. Guides for making HMEs and instructions for constructing IEDs are widely available and can be easily found on the internet. Other countries restrict access to precursor chemicals in an effort to reduce the opportunity for HMEs to be used in IEDs. Although IED attacks have been less frequent in the United States than in other countries, IEDs remain a persistent domestic threat. Restricting access to precursor chemicals might contribute to reducing the threat of IED attacks and in turn prevent potentially devastating bombings, save lives, and reduce financial impacts. Reducing the Threat of Improvised Explosive Device Attacks by Restricting Access to Explosive Precursor Chemicals prioritizes precursor chemicals that can be used to make HMEs and analyzes the movement of those chemicals through United States commercial supply chains and identifies potential vulnerabilities. This report examines current United States and international regulation of the chemicals, and compares the economic, security, and other tradeoffs among potential control strategies.

Download or read book Rock Fracture and Blasting written by Zong-Xian Zhang and published by Butterworth-Heinemann. This book was released on 2016-04-26 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Fracture and Blasting: Theory and Applications provides the latest on stress waves, shock waves, and rock fracture, all necessary components that must be critically analyzed to maximize results in rock blasting. The positioning of charges and their capacity and sequencing are covered in this book, and must be carefully modeled to minimize impact in the surrounding environment. Through an explanation of these topics, author Professor Zhang’s experience in the field, and his theoretical knowledge, users will find a thorough guide that is not only up-to-date, but complete with a unique perspective on the field. Includes a rigorous exposition of Stress Waves and Shock Waves, as well as Rock Fracture and Fragmentation Provides both Empirical and Hybrid Stress Blasting Modeling tools and techniques for designing effective blast plans Offers advanced knowledge that enables users to choose better blast techniques Includes exercises for learning and training in each chapter

Download or read book High Explosives and Propellants written by S. Fordham and published by Elsevier. This book was released on 2013-10-22 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Explosives and Propellants, Second Edition is a four-part book classified into High Explosives, Blasting Accessories, Application of High Explosives, and Deflagrating and Propellent Explosives. Part I, High Explosives, centers on the general principles, manufacture, design, and assessment of this type of explosive. Part II, Blasting Accessories, describes initiation of explosives and different types of detonators. Part III, Application of High Explosives, deals with the commercial and military applications of high explosives. The last part, Deflagrating and Propellent Explosives, discusses the manufacture, properties, design, and application of propellants.

Download or read book Explosives and Blasting Procedures Manual written by Richard A. Dick and published by . This book was released on 2004-12-01 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Bureau of Mines report covers the latest technology in explosives and blasting procedures. It includes information and procedures developed by Bureau research, explosives manufacturers, and the mining industry. It is intended for use as a guide in developing training programs and also to provide experienced blasters an update on the latest state of technology in the broad field of explosives and blasting. Types of explosives and blasting agents and their key explosive and physical properties are discussed. Explosives selection criteria are described. The features of the traditional initiation systems - electrical, detonating cord, and cap and fuse - are pointed out, and the newer nonelectric initiation systems are discussed. Various blasthole priming techniques are described. Blasthole loading of various explosive types is covered. Blast design, including geologic considerations, for both surface and underground blasting is detailed. Environmental effects of blasting such as flyrock and air and ground vibrations are discussed along with techniques of measuring and alleviating these undesirable side effects. Blasting safety procedures are detailed in the chronological order of the blasting process. The various Federal blasting regulations are enumerated along with their Code of Federal Regulations citations. An extensive glossary of blasting related terms is included along with references to articles providing more detailed information on the aforementioned items. Emphasis in the report has been placed on practical considerations.

Download or read book Emergency Response Guidebook written by U.S. Department of Transportation and published by Simon and Schuster. This book was released on 2013-06-03 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Does the identification number 60 indicate a toxic substance or a flammable solid, in the molten state at an elevated temperature? Does the identification number 1035 indicate ethane or butane? What is the difference between natural gas transmission pipelines and natural gas distribution pipelines? If you came upon an overturned truck on the highway that was leaking, would you be able to identify if it was hazardous and know what steps to take? Questions like these and more are answered in the Emergency Response Guidebook. Learn how to identify symbols for and vehicles carrying toxic, flammable, explosive, radioactive, or otherwise harmful substances and how to respond once an incident involving those substances has been identified. Always be prepared in situations that are unfamiliar and dangerous and know how to rectify them. Keeping this guide around at all times will ensure that, if you were to come upon a transportation situation involving hazardous substances or dangerous goods, you will be able to help keep others and yourself out of danger. With color-coded pages for quick and easy reference, this is the official manual used by first responders in the United States and Canada for transportation incidents involving dangerous goods or hazardous materials.

Download or read book Comprehensive Sampling and Sample Preparation written by Josep M. Bayona and published by Academic Press. This book was released on 2012-12-31 with total page 2998 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Sampling and Sample Preparation is a complete treatment of the theory and methodology of sampling in all physical phases and the theory of sample preparation for all major extraction techniques. It is the perfect starting point for researchers and students to design and implement their experiments and support those experiments with quality-reviewed background information. In its four volumes, fundamentals of sampling and sample preparation are reinforced through broad and detailed sections dealing with Biological and Medical, Environmental and Forensic, and Food and Beverage applications. The contributions are organized to reflect the way in which analytical chemists approach a problem. It is intended for a broad audience of analytical chemists, both educators and practitioners of the art and can assist in the preparation of courses as well in the selection of sampling and sample preparation techniques to address the challenges at hand. Above all, it is designed to be helpful in learning more about these topics, as well as to encourage an interest in sampling and sample preparation by outlining the present practice of the technology and by indicating research opportunities. Sampling and Sample preparation is a large and well-defined field in Analytical Chemistry, relevant for many application areas such as medicine, environmental science, biochemistry, pharmacology, geology, and food science. This work covers all these aspects and will be extremely useful to researchers and students, who can use it as a starting point to design and implement their experiments and for quality-reviewed background information There are limited resources that Educators can use to effectively teach the fundamental aspects of modern sample preparation technology. Comprehensive Sampling and Sample Preparation addresses this need, but focuses on the common principles of new developments in extraction technologies rather than the differences between techniques thus facilitating a more thorough understanding Provides a complete overview of the field. Not only will help to save time, it will also help to make correct assessments and avoid costly mistakes in sampling in the process Sample and sample preparation are integral parts of the analytical process but are often less considered and sometimes even completely disregarded in the available literature. To fill this gap, leading scientists have contributed 130 chapters, organized in 4 volumes, covering all modern aspects of sampling and liquid, solid phase and membrane extractions, as well as the challenges associated with different types of matrices in relevant application areas

Download or read book Encyclopedia of Forensic Sciences written by and published by Academic Press. This book was released on 2012-12-28 with total page 2253 pages. Available in PDF, EPUB and Kindle. Book excerpt: Forensic science includes all aspects of investigating a crime, including: chemistry, biology and physics, and also incorporates countless other specialties. Today, the service offered under the guise of "forensic science’ includes specialties from virtually all aspects of modern science, medicine, engineering, mathematics and technology. The Encyclopedia of Forensic Sciences, Second Edition, Four Volume Set is a reference source that will inform both the crime scene worker and the laboratory worker of each other’s protocols, procedures and limitations. Written by leading scientists in each area, every article is peer reviewed to establish clarity, accuracy, and comprehensiveness. As reflected in the specialties of its Editorial Board, the contents covers the core theories, methods and techniques employed by forensic scientists – and applications of these that are used in forensic analysis. This 4-volume set represents a 30% growth in articles from the first edition, with a particular increase in coverage of DNA and digital forensics Includes an international collection of contributors The second edition features a new 21-member editorial board, half of which are internationally based Includes over 300 articles, approximately 10pp on average Each article features a) suggested readings which point readers to additional sources for more information, b) a list of related Web sites, c) a 5-10 word glossary and definition paragraph, and d) cross-references to related articles in the encyclopedia Available online via SciVerse ScienceDirect. Please visit www.info.sciencedirect.com for more information This new edition continues the reputation of the first edition, which was awarded an Honorable Mention in the prestigious Dartmouth Medal competition for 2001. This award honors the creation of reference works of outstanding quality and significance, and is sponsored by the RUSA Committee of the American Library Association

Download or read book The Chlamydomonas Sourcebook Introduction to Chlamydomonas and Its Laboratory Use written by Elizabeth H. Harris and published by Academic Press. This book was released on 2009-03-07 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dr. Harris has played a major role in the development of this organism as a model system. Her previous version of the Chlamydomonas Sourcebook which published in 1989, has been a classic in the field and is considered required reading for anyone working with this organism. This latest edition has been expanded to include three volumes providing molecular techniques, analysis of the recently sequenced genome, and reviews of the current status of the diverse fields in which Chlamydomonas is used as a model organism. Methods for Chlamydomonas research and best practices for applications in research, including methods for culture, preservation of cultures, preparation of media, lists of inhibitors and other additives to culture media, are included. Additions to this volume also include help with common laboratory problems such as contamination, student demonstrations, and properties of particular strains and mutants. This volume is part of a 3-Volume Set (ISBN: 978-0-12-370873-1) and is also sold individually. - Expanded revision of gold standard reference - Includes latest advances in research, including completion of the genome - Provides broad perspective with studies in cell and molecular biology, genetics, plant physiology and related fields - Available as part of a 3-Volume Set or sold individually

Download or read book High Energy Materials written by Jai Prakash Agrawal and published by John Wiley & Sons. This book was released on 2015-11-20 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authored by an insider with over 40 years of high energy materials (HEMs) experience in academia, industry and defense organizations, this handbook and ready reference covers all important HEMs from the 1950s to the present with their respective properties and intended purposes. Written at an attainable level for professionals, engineers and technicians alike, the book provides a comprehensive view of the current status and suggests further directions for research and development. An introductory chapter on the chemical and thermodynamic basics allows the reader to become acquainted with the fundamental features of explosives, before moving on to the important safety aspects in processing, handling, transportation and storage of high energy materials. With its collation of results and formulation strategies hitherto scattered in the literature, this should be on the shelf of every HEM researcher and developer.

Download or read book Test Methods for Explosives written by Muhamed Suceska and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: It seems that there is no book that treats the measurement of the physical pa rameters of explosives as its only subject, although limited information is avail able in a number of books. Therefore, I have tried to bridge this gap in the lit erature with this book. A large number of various physical parameters have to be determined ex perimentally in order to test or characterise an explosive. Various physical principles have been applied for such measurements. Accordingly, a large number of different experimental methods exist, as well as various testing appa ratuses and procedures. On the other hand, great progress has been made recently in the study of detonation phenomena. New measuring techniques can assess extremely short processes to below nanoseconds scale. They make it possible to determine im portant parameters in detonation physics. I have made a great attempt to cover the available literature data on the subject. Because it would be a highly demanding task to include in a single volume all the methods that are in use by various testing agencies, I have tried to give primarily the principles for determination of individual physical pa rameters of explosives by different measuring methods as well as data treatment procedures.

Download or read book Recommendations on the Transport of Dangerous Goods written by United Nations and published by . This book was released on 2020-01-06 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Manual of Tests and Criteria contains criteria, test methods and procedures to be used for classification of dangerous goods according to the provisions of Parts 2 and 3 of the United Nations Recommendations on the Transport of Dangerous Goods, Model Regulations, as well as of chemicals presenting physical hazards according to the Globally Harmonized System of Classification and Labelling of Chemicals (GHS). As a consequence, it supplements also national or international regulations which are derived from the United Nations Recommendations on the Transport of Dangerous Goods or the GHS. At its ninth session (7 December 2018), the Committee adopted a set of amendments to the sixth revised edition of the Manual as amended by Amendment 1. This seventh revised edition takes account of these amendments. In addition, noting that the work to facilitate the use of the Manual in the context of the GHS had been completed, the Committee considered that the reference to the "Recommendations on the Transport of Dangerous Goods" in the title of the Manual was no longer appropriate, and decided that from now on, the Manual should be entitled "Manual of Tests and Criteria".

Download or read book Existing and Potential Standoff Explosives Detection Techniques written by National Research Council and published by National Academies Press. This book was released on 2004-05-14 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: Existing and Potential Standoff Explosives Detection Techniques examines the scientific techniques currently used as the basis for explosives detection and determines whether other techniques might provide promising research avenues with possible pathways to new detection protocols. This report describe the characteristics of explosives, bombs, and their components that are or might be used to provide a signature for exploitation in detection technology; considers scientific techniques for exploiting these characteristics to detect explosives and explosive devices; discusses the potential for integrating such techniques into detection systems that would have sufficient sensitivity without an unacceptable false-positive rate; and proposes areas for research that might be expected to yield significant advances in practical explosives and bomb detection technology in the near, mid, and long term.

Download or read book Emulsion Explosives written by Xuguang Wang and published by . This book was released on 1994 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Applied Explosives Technology for Construction and Mining written by Stig O. Olofsson and published by . This book was released on 1990 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Chemistry of Explosives written by Jacqueline Akhavan and published by Royal Society of Chemistry. This book was released on 2004 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: Revised and expanded to reflect new developments in the field, this book outlines the basic principles required to understand the chemical processes of explosives. The Chemistry of Explosives provides an overview of the history of explosives, taking the reader to future developments. The text on the classification of explosive materials contains much data on the physical parameters of primary and secondary explosives. The explosive processes of deflagration and detonation, including the theory of 'hotspots' for the detonation process, are introduced and many examples are provided in the detailed description on the thermochemistry of explosives. New material includes coverage of the latest explosive compositions, such as high temperature explosives, nitrocubanes, energetic polymers, plasticizers and insensitive munitions (IM). This concise, readable book is ideal for 'A' level students and new graduates with no previous knowledge of explosive materials. With detailed information on a vast range of explosives in tabular form and an extensive bibliography, this book will also be useful to anyone needing succinct information on the subject.

Download or read book Ammonium Nitrate Explosives for Civil Applications written by Erode G. Mahadevan and published by John Wiley & Sons. This book was released on 2013-02-01 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book describes the science and technology of formulation and manufacturing of non-nitroglycerine explosives with ammonium nitrate as the main ingredient. Based on the author's industry experience of more than thirty years, it provides an unparalleled treatment of one of the commercially most important classes of explosives and therefore stimulates further research and development efforts in the field of explosives for civil applications.