Download or read book Rock socketed Shafts for Highway Structure Foundations written by John P. Turner and published by Transportation Research Board. This book was released on 2006 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRB's National Cooperative Highway Research Program (NCHRP) Synthesis 360: Rock-Socketed Shafts for Highway Structure Foundations explores current practices pertaining to each step of the design process, along with the limitations; identifies emerging and promising technologies; examines the principal challenges in advancing the state of the practice; and investigates future developments and potential improvements in the use and design of rock-socketed shafts.
Download or read book Drilled Shafts in Rock written by Lianyang Zhang and published by CRC Press. This book was released on 2004-05-15 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drilled shafts in rock are widely used as foundations of heavy structures such as highway bridges and tall buildings. Although much has been learned about the analysis and design of drilled shafts in rock, all the major findings are published in the form of reports and articles in technical journals and conference proceedings. This book i
Download or read book Drilled Shafts written by Michael W. O'Neill and published by . This book was released on 1999 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Drilled Shafts in Rock written by Lianyang Zhang and published by CRC Press. This book was released on 2004-05-15 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drilled shafts in rock are widely used as foundations of heavy structures such as highway bridges and tall buildings. Although much has been learned about the analysis and design of drilled shafts in rock, all the major findings are published in the form of reports and articles in technical journals and conference proceedings. This book i
Download or read book Drilled Shaft Design and Construction Guidelines Manual written by Lymon C. Reese and published by . This book was released on 1977 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Principles of Foundation Engineering written by Braja M. Das and published by Cengage Learning. This book was released on 2018-10-03 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master the core concepts and applications of foundation analysis and design with Das/Sivakugan’s best-selling PRINCIPLES OF FOUNDATION ENGINEERING, 9th Edition. Written specifically for those studying undergraduate civil engineering, this invaluable resource by renowned authors in the field of geotechnical engineering provides an ideal balance of today's most current research and practical field applications. A wealth of worked-out examples and figures clearly illustrate the work of today's civil engineer, while timely information and insights help readers develop the critical skills needed to properly apply theories and analysis while evaluating soils and foundation design. Important Notice: Media content referenced within the product description or the product text may not be available in the ebook version.
Download or read book Standard Specifications for Highway Bridges written by American Association of State Highway and Transportation Officials and published by AASHTO. This book was released on 2002 with total page 1054 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Drilled Shaft Design and Construction Guidelines Manual Reese L C and Allen J D Structural analysis and design for lateral loading written by Lymon C. Reese and published by . This book was released on 1977 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Model Uncertainties in Foundation Design written by Chong Tang and published by CRC Press. This book was released on 2021-03-17 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model Uncertainties in Foundation Design is unique in the compilation of the largest and the most diverse load test databases to date, covering many foundation types (shallow foundations, spudcans, driven piles, drilled shafts, rock sockets and helical piles) and a wide range of ground conditions (soil to soft rock). All databases with names prefixed by NUS are available upon request. This book presents a comprehensive evaluation of the model factor mean (bias) and coefficient of variation (COV) for ultimate and serviceability limit state based on these databases. These statistics can be used directly for AASHTO LRFD calibration. Besides load test databases, performance databases for other geo-structures and their model factor statistics are provided. Based on this extensive literature survey, a practical three-tier scheme for classifying the model uncertainty of geo-structures according to the model factor mean and COV is proposed. This empirically grounded scheme can underpin the calibration of resistance factors as a function of the degree of understanding – a concept already adopted in the Canadian Highway Bridge Design Code and being considered for the new draft for Eurocode 7 Part 1 (EN 1997-1:202x). The helical pile research in Chapter 7 was recognised by the 2020 ASCE Norman Medal.
Download or read book Drilled Shaft Design and Construction Guidelines Manual Construction procedures and design for axial loading written by Lymon C. Reese and published by . This book was released on 1977 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Drilled Shafts written by National Highway Institute (U.S.) and published by . This book was released on 1988 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document was written as a resource for participants in a short course covering the topic of construction and design of drilled shaft foundations for bridges and other structures. It is the second edition of a Federal Highway Administration workbook on construction and design of drilled shafts. The first edition was written in 1988 (FHWA-SA-HI-88-042). While introductory material from the 1988 edition was retained, the emphasis in this document is on providing relatively comprehensive information for engineers who already have some experience with drilled shaft construction and/or design. The initial chapters cover an overview of the characteristics of drilled shafts, site investigations for drilled shafts (to collect information for both construction and design), and details of drilled shaft construction. These chapters are followed by several chapters on the design of drilled shafts in soil and rock for both axial and lateral loading, with examples. Both allowable stress design and load and resistance factor design principles are addressed. Details of design calculations procedures are provided in the appendices.
Download or read book Introduction to Rock Mechanics written by Richard E. Goodman and published by John Wiley & Sons. This book was released on 1991-01-16 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduces a new approach to rock mechanics called ``block theory,'' which formalizes procedures for selecting proper shapes and orientations for excavations in hard jointed rock. Applies block theory to rock slopes and underground excavations, and covers the Q theory of rock classification, the empirical criterion of joint shear strength, rock bolting, properties of weak rocks, statistical frequency of jointing, an empirical criterion of rock strength, and design of underground supports. Contains many new problems with worked-out solutions.
Download or read book Correlations of Soil and Rock Properties in Geotechnical Engineering written by Jay Ameratunga and published by Springer. This book was released on 2015-12-11 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a one-stop reference to the empirical correlations used extensively in geotechnical engineering. Empirical correlations play a key role in geotechnical engineering designs and analysis. Laboratory and in situ testing of soils can add significant cost to a civil engineering project. By using appropriate empirical correlations, it is possible to derive many design parameters, thus limiting our reliance on these soil tests. The authors have decades of experience in geotechnical engineering, as professional engineers or researchers. The objective of this book is to present a critical evaluation of a wide range of empirical correlations reported in the literature, along with typical values of soil parameters, in the light of their experience and knowledge. This book will be a one-stop-shop for the practising professionals, geotechnical researchers and academics looking for specific correlations for estimating certain geotechnical parameters. The empirical correlations in the forms of equations and charts and typical values are collated from extensive literature review, and from the authors' database.
Download or read book The Foundation Engineering Handbook written by Manjriker Gunaratne and published by CRC Press. This book was released on 2006-01-13 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: Great strides have been made in the art of foundation design during the last two decades. In situ testing, site improvement techniques, the use of geogrids in the design of retaining walls, modified ACI codes, and ground deformation modeling using finite elements are but a few of the developments that have significantly advanced foundation engineering in recent years. What has been lacking, however, is a comprehensive reference for foundation engineers that incorporates these state-of-the-art concepts and techniques. The Foundation Engineering Handbook fills that void. It presents both classical and state-of-the-art design and analysis techniques for earthen structures, and covers basic soil mechanics and soil and groundwater modeling concepts along with the latest research results. It addresses isolated and shallow footings, retaining structures, and modern methods of pile construction monitoring, as well as stability analysis and ground improvement methods. The handbook also covers reliability-based design and LRFD (Load Resistance Factor Design)-concepts not addressed in most foundation engineering texts. Easy-to-follow numerical design examples illustrate each technique. Along with its unique, comprehensive coverage, the clear, concise discussions and logical organization of The Foundation Engineering Handbook make it the one quick reference every practitioner and student in the field needs.
Download or read book Geotechnical Problem Solving written by John C. Lommler and published by John Wiley & Sons. This book was released on 2012-01-26 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Devised with a focus on problem solving, Geotechnical Problem Solving bridges the gap between geotechnical and soil mechanics material covered in university Civil Engineering courses and the advanced topics required for practicing Civil, Structural and Geotechnical engineers. By giving newly qualified engineers the information needed to apply their extensive theoretical knowledge, and informing more established practitioners of the latest developments, this book enables readers to consider how to confidently approach problems having thought through the various options available. Where various competing solutions are proposed, the author systematically leads through each option, weighing up the benefits and drawbacks of each, to ensure the reader can approach and solve real-world problems in a similar manner The scope of material covered includes a range of geotechnical topics, such as soil classification, soil stresses and strength and soil self-weight settlement. Shallow and deep foundations are analyzed, including special articles on laterally loaded piles, retaining structures including MSE and Tieback walls, slope and trench stability for natural, cut and fill slopes, geotechnical uncertainty, and geotechnical LRFD (Load and Resistance Factor Design).
Download or read book Design of Reinforced Concrete Foundations written by P. C. Varghese and published by PHI Learning Pvt. Ltd.. This book was released on 2009-12 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: It explains step-by-step procedure for the design of each type of foundation with the help of a large number of worked-out examples. The book provides an in-depth analysis of topics, such as wall footings, balanced footings, raft foundations, beam and slab rafts, pile caps and pile foundations.
Download or read book Foundation Drilling written by and published by . This book was released on 2002 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt:
