Download or read book Avoiding Inelastic Strains in Solder Joint Interconnections of IC Devices written by Ephraim Suhir and published by CRC Press. This book was released on 2021-01-28 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Avoiding Inelastic Strains in Solder Joint Interconnections of IC Devices addresses analytical (mathematical) modeling approaches aimed at understanding the underlying physics and mechanics of the behavior and performance of solder materials and solder joint interconnections of IC devices. The emphasis is on design for reliability, including probabilistic predictions of the solder lifetime. Describes how to use the developed methods of analytical predictive modeling to minimize thermal stresses and strains in solder joint of IC devices Shows how to build the preprocessing models in finite-element analyses (FEA) by comparing the FEA and analytical data Covers how to design the most effective test vehicles for testing solder joints Details how to design and organize, in addition to or sometimes even instead of highly accelerated life tests (HALT), highly focused and highly cost-effective failure oriented accelerated testing (FOAT) to understand the physic of failure of solder joint interconnections Outlines how to convert the low cycle fatigue conditions into elastic fatigue conditions and to assess the fatigue lifetime in such cases Illustrates ways to replace time- and labor-consuming, expensive, and possibly misleading temperature cycling tests with simpler and physically meaningful accelerated tests This book is aimed towards professionals in electronic and photonic packaging, electronic and optical materials, materials engineering, and mechanical design.
Download or read book Mechanics of Solder Alloy Interconnects written by Darrel R. Frear and published by Springer Science & Business Media. This book was released on 1994-01-31 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Mechanics of Solder Alloy Interconnects is a resource to be used in developing a solder joint reliability assessment. Each chapter is written to be used as a stand-alone resource for a particular aspect of materials and modeling issues. With this gained understanding, the reader in search of a solution to a solder joint reliability problem knows where in the materials and modeling communities to go for the appropriate answer.
Download or read book Fundamentals of Lead Free Solder Interconnect Technology written by Tae-Kyu Lee and published by Springer. This book was released on 2014-11-05 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique book provides an up-to-date overview of the concepts behind lead-free soldering techniques. Readers will find a description of the physical and mechanical properties of lead-free solders, in addition to lead-free electronics and solder alloys. Additional topics covered include the reliability of lead-free soldering, tin whiskering and electromigration, in addition to emerging technologies and research.
Download or read book Design and Reliability of Solders and Solder Interconnections written by Rao K. Mahidhara and published by Minerals, Metals, & Materials Society. This book was released on 1997 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: The reliability of solders and solder joints is an important factor in the durability and design of electronic packages. This volume addresses issues of reliability such as microstructural stability in service, creep, fatigue, creep/fatigue interactions, and thermomechanical fatigue of bulk solders and solder joints.
Download or read book Avoiding Inelastic Strains in Solder Joint Interconnections of IC Devices written by Ephraim Suhir and published by . This book was released on 2020 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book addresses analytical (mathematical) modeling approaches aimed at understanding the underlying physics and mechanics of the behavior and performance of solder materials and solder joint interconnections of IC devices. The emphasis is on design for reliability, including probabilistic predictions of the solder lifetime.
Download or read book Lead Free Solder written by and published by Springer. This book was released on 2011-10-15 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lead free Solder Interconnect Reliability written by Dongkai Shangguan and published by ASM International(OH). This book was released on 2005 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides the most up-to-date knowledge and data available on the reliability of lead-free solder interconnects. The content has been written by leading experts working in this important technology area. Both fundamental research and practical considerations are addressed.
Download or read book Solder Joint Reliability written by John H. Lau and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solders have given the designer of modern consumer, commercial, and military electronic systems a remarkable flexibility to interconnect electronic components. The properties of solder have facilitated broad assembly choices that have fueled creative applications to advance technology. Solder is the electrical and me chanical "glue" of electronic assemblies. This pervasive dependency on solder has stimulated new interest in applica tions as well as a more concerted effort to better understand materials properties. We need not look far to see solder being used to interconnect ever finer geo metries. Assembly of micropassive discrete devices that are hardly visible to the unaided eye, of silicon chips directly to ceramic and plastic substrates, and of very fine peripheral leaded packages constitute a few of solder's uses. There has been a marked increase in university research related to solder. New electronic packaging centers stimulate applications, and materials engineering and science departments have demonstrated a new vigor to improve both the materials and our understanding of them. Industrial research and development continues to stimulate new application, and refreshing new packaging ideas are emerging. New handbooks have been published to help both the neophyte and seasoned packaging engineer.
Download or read book Lead Free Electronic Solders written by KV Subramanian and published by Springer Science & Business Media. This book was released on 2007-06-28 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Even though the effect of lead contamination on human health has been known for decades, very little attention has been paid to lead-based solders used in electronics until recently. This comprehensive book examines all the important issues associated with lead-free electronic solder. It collects the work of researchers recognized for their significant scientific contributions in the area.
Download or read book Moisture Sensitivity of Plastic Packages of IC Devices written by X.J. Fan and published by Springer Science & Business Media. This book was released on 2010-07-23 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: Moisture Sensitivity of Plastic Packages of IC Devices provides information on the state-of-the-art techniques and methodologies related to moisture issues in plastic packages. The most updated, in-depth and systematic technical and theoretical approaches are addressed in the book. Numerous industrial applications are provided, along with the results of the most recent research and development efforts, including, but not limited to: thorough exploration of moisture's effects based on lectures and tutorials by the authors, consistent focus on solution-based approaches and methodologies for improved reliability in plastic packaging, emerging theories and cutting-edge industiral applications presented by the leading professionals in the field. Moisture plays a key role in the reliability of plastic packages of IC devices, and moisture-induced failures have become an increasing concern with the development of advanced IC devices. This second volume in the Micro- and Opto-Electronic Materials, Structures, and Systems series is a must-read for researchers and engineers alike.
Download or read book Electrical Electronics Abstracts written by and published by . This book was released on 1997 with total page 1948 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials for Advanced Packaging written by Daniel Lu and published by Springer. This book was released on 2016-11-18 with total page 974 pages. Available in PDF, EPUB and Kindle. Book excerpt: Significant progress has been made in advanced packaging in recent years. Several new packaging techniques have been developed and new packaging materials have been introduced. This book provides a comprehensive overview of the recent developments in this industry, particularly in the areas of microelectronics, optoelectronics, digital health, and bio-medical applications. The book discusses established techniques, as well as emerging technologies, in order to provide readers with the most up-to-date developments in advanced packaging.
Download or read book Surface Mount Technology written by Ray Prasad and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 791 pages. Available in PDF, EPUB and Kindle. Book excerpt: A foreword is usually prepared by someone who knows the author or who knows enough to provide additional insight on the purpose of the work. When asked to write this foreword, I had no problem with what I wanted to say about the work or the author. I did, however, wonder why people read a foreword. It is probably of value to know the background of the writer of a book; it is probably also of value to know the background of the individual who is commenting on the work. I consider myself a good friend of the author, and when I was asked to write a few words I felt honored to provide my view of Ray Prasad, his expertise, and the contribution that he has made to our industry. This book is about the industry, its technology, and its struggle to learn and compete in a global market bursting with new ideas to satisfy a voracious appetite for new and innovative electronic products. I had the good fortune to be there at the beginning (or almost) and have witnessed the growth and excitement in the opportunities and challenges afforded the electronic industries' engineering and manufacturing talents. In a few years my involve ment will span half a century.
Download or read book Applied Probability for Engineers and Scientists written by Ephraim Suhir and published by McGraw-Hill Professional Publishing. This book was released on 1996-12-31 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is a concise guide to the principles of probability as used in the design and anlysis of engineered products and systems. With today's demand for total quality, products must be enigneered to have an extended lifetime, operating effectivly at all times to match the user's expectations. This book covers probabilistic methods and approaches used in engineering design and analysis in such disciplines as mechanical, civil, electrical, communications and quality engineering. Its emphasis is on structural analysis and mechanical design as well as practical applications.
Download or read book Benefiting from Thermal and Mechanical Simulation in Micro Electronics written by L.J. Ernst and published by Springer Science & Business Media. This book was released on 2000-12-31 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Benefiting from Thermal and Mechanical Simulation inMicro-Electronics" presents papers from the first internationalconference on this topic, EuroSimE2000. For the first time, peoplefrom the electronics industry, research institutes, software companiesand universities joined together to discuss present and possiblefuture thermal and mechanical related problems and challenges inmicro-electronics; the state-of-the-art methodologies for thermal &mechanical simulation and optimization of micro-electronics; and theperspectives of future simulation and optimization methodologydevelopment.Main areas covered are: - "Benefiting from Thermal and""Mechanical Simulation in Micro-Electronics" is suitable forstudents at graduate level and beyond, and for researchers, designersand specialists in the fields of microelectronics and mechanics.
Download or read book Assembly and Reliability of Lead Free Solder Joints written by John H. Lau and published by Springer Nature. This book was released on 2020-05-29 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the assembly and reliability of lead-free solder joints. Both the principles and engineering practice are addressed, with more weight placed on the latter. This is achieved by providing in-depth studies on a number of major topics such as solder joints in conventional and advanced packaging components, commonly used lead-free materials, soldering processes, advanced specialty flux designs, characterization of lead-free solder joints, reliability testing and data analyses, design for reliability, and failure analyses for lead-free solder joints. Uniquely, the content not only addresses electronic manufacturing services (EMS) on the second-level interconnects, but also packaging assembly on the first-level interconnects and the semiconductor back-end on the 3D IC integration interconnects. Thus, the book offers an indispensable resource for the complete food chain of electronics products.
Download or read book Die Attach Materials for High Temperature Applications in Microelectronics Packaging written by Kim S. Siow and published by Springer. This book was released on 2019-01-29 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the scientific principles, processing conditions, probable failure mechanisms, and a description of reliability performance and equipment required for implementing high-temperature and lead-free die attach materials. In particular, it addresses the use of solder alloys, silver and copper sintering, and transient liquid-phase sintering. While different solder alloys have been used widely in the microelectronics industry, the implementation of sintering silver and transient liquid-phase sintering remains limited to a handful of companies. Hence, the book devotes many chapters to sintering technologies, while simultaneously providing only a cursory coverage of the more widespread techniques employing solder alloys. Addresses the differences between sintering and soldering (the current die-attach technologies), thereby comprehensively addressing principles, methods, and performance of these high-temperature die-attach materials; Emphasizes the industrial perspective, with chapters written by engineers who have hands-on experience using these technologies; Baker Hughes, Bosch and ON Semiconductor, are represented as well as materials suppliers such as Indium; Simultaneously provides the detailed science underlying these technologies by leading academic researchers in the field.
