Download or read book Automotive Technician Training Entry Level 3 written by Tom Denton and published by Routledge. This book was released on 2014-11-13 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: A blended learning approach to automotive engineering at foundation level Used alongside the ATT Training online learning resources, this textbook covers everything that students need to learn in order to pass Introduction to Motor Vehicle Engineering (EL3) automotive courses. This book takes a blended learning approach, using interactive features that make learning more enjoyable as well as more effective. When linked with the ATT Training online resources it provides a comprehensive package that includes activities, animations, assessments and further reading. Information and activities are set out in sequence so as to meet teacher and learner needs as well as qualification requirements.
Download or read book Automotive Technician Training Entry Level 3 written by Tom Denton and published by Routledge. This book was released on 2014-11-13 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: A blended learning approach to automotive engineering at foundation level Used alongside the ATT Training online learning resources, this textbook covers everything that students need to learn in order to pass Introduction to Motor Vehicle Engineering (EL3) automotive courses. This book takes a blended learning approach, using interactive features that make learning more enjoyable as well as more effective. When linked with the ATT Training online resources it provides a comprehensive package that includes activities, animations, assessments and further reading. Information and activities are set out in sequence so as to meet teacher and learner needs as well as qualification requirements.
Download or read book Automotive Technician Training Practical Worksheets Level 3 written by Tom Denton and published by Routledge. This book was released on 2015-06-12 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: Automotive practical worksheets and assessments for students at Level 3 This Level 3 Student Worksheets book contains tasks that help you develop practical skills and prepare you for assessment. The tasks also reinforce the automotive theory that you will learn online and in the classroom. Each worksheet covers individual topics in a step-by-step manner, detailing how to carry out all of the most important tasks contained within the syllabus. Alongside each of these worksheets is a job card that can be filled in and used as evidence towards your qualification. Endorsed by the Institute of the Motor Industry for all of their Level 3 automotive courses. Step-by-step guides to the practical tasks required at all Level 3 qualifications. Job sheets for students to complete and feedback sheets for assessors to complete.
Download or read book Automotive Technician Training Theory written by Tom Denton and published by Taylor & Francis. This book was released on 2021-09-21 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: Automotive Technician Training is the definitive student textbook for automotive engineering. It covers all the theory and technology sections that students need to learn in order to pass levels 1, 2 and 3 automotive courses. It is recommended by the Institute of the Motor Industry and is ideal for courses and exams run by other awarding bodies. This revised edition overhauls the coverage of general skills and advanced diagnostic techniques, and includes a new chapter about electric and hybrid vehicles and advanced driver-assistance systems. Information and activities are set out in sequence to meet teacher and learner needs, as well as qualification requirements. The book has been written to be used on its own or as part of a blended-learning approach. It also includes links to interactive activities, assessments and video footage on the IMI eLearning platform, for which a separate subscription is required.
Download or read book Math for Automotive Technicians written by Luke D. Thompson and published by Goodheart-Wilcox Publisher. This book was released on 2018-02-13 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Math for Automotive Technicians is designed to help you learn and apply basic math skills. The first part of the text provides 12 lessons that develop a mastery of basic math skills in the context of automotive service. Coverage includes whole number operations, decimals, greater than/less than, tape measure fractions, conversion, graphs and tables, formulas, measurement, and comparing to specifications. The second part consists of 96 case studies that apply and extend the basic math skills with actual vehicle procedures, data, and specifications. For ease of integration with curricula based on the NATEF standards, the case studies are grouped into automotive service areas, such as chassis systems, engine mechanical, electrical, etc. Answers to odd-numbered practice problems are listed in the back of the text. Math for Automotive Technicians is well-suited for use as either the core text in a dedicated applied math course or a supplemental text in an automotive technology program.
Download or read book Automotive Technician Training written by Tom Denton and published by Routledge. This book was released on 2021 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Automotive Technician Training is the definitive student textbook for automotive engineering. It covers all the theory and technology sections that students need to learn in order to pass levels 1, 2 and 3 automotive courses. It is recommended by the Institute of the Motor Industry and is ideal for courses and exams run by other awarding bodies. This revised edition overhauls the coverage of general skills and advanced diagnostic techniques. It also includes a new chapter about electric and hybrid vehicles and advanced driver-assistance systems, along with new online learning activities. Unlike current textbooks on the market, this takes a blended-learning approach, using interactive features that make learning more enjoyable and effective. It is ideal to use on its own but when linked with IMI eLearning online resources, it provides a comprehensive package that includes activities, video footage, assessments and further reading. Information and activities are set out in sequence to meet teacher and learner needs, as well as qualification requirements.
Download or read book Automotive Technician Training written by ATT Training and published by . This book was released on 2014 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This textbook covers all the theory and technology sections that students need to learn in order to pass level 1, 2 and 3 automotive courses from the Institute of Motor Industry, City & Guilds and other exam boards. It has been produced in partnership with ATT Training and is a companion to their online learning resources. Learning is made more enjoyable and effective as the topics in the book are supported with online activities, video footage, assessments and further reading. If you are using ATT Training materials then this is the ideal textbook for your course"--
Download or read book Advanced Automotive Engine Performance written by Michael Klyde and published by Jones & Bartlett Learning. This book was released on 2020-04-17 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Automotive Engine Performance is designed to prepare novice technicians for the challenge of diagnosing today’s highly technical electronic engine controls. Using this curriculum, learners will gain familiarity with the operation and variations of emissions systems and associated onboard monitors. The curriculum especially focuses on applying diagnostic strategy to and performing service procedures for emissions systems faults. Learners will also develop an understanding of IM testing and an ability to interpret IM test reports to aid in diagnosis. This objective-based curriculum will prepare learners for the challenges of servicing engine management systems in the shop today. This is a complete curriculum solution for Advanced Automotive Engine Performance. Online courseware is available and is rich in video and animation to support understanding of complex systems. This solution is available in print-plus-digital, or digital-only offerings, providing eBook and online course pairing with mobile-friendly adaptability. Complete tests, tasksheets, and instructor resources make this curriculum easy to adopt and integrate into any automotive program.
Download or read book Fundamentals of Automotive Maintenance and Light Repair written by Kirk VanGelder and published by Jones & Bartlett Learning. This book was released on 2019-01-29 with total page 1424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed to prepare new technicians for ASE G1 Certification, Fundamentals of Automotive Maintenance and Light Repair, Second Edition covers the foundational theory and skills necessary to prepare entry-level technicians to maintain and repair today's light duty vehicles.
Download or read book Engine Repair A1 written by Delmar Cengage Learning and published by ASE Test Prep: Automotive Tech. This book was released on 2011-06 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews topics covered on the exam, offers test taking tips, and includes six practice exams.
Download or read book Auto Collision Repair and Refinishing written by Michael Crandell and published by Goodheart-Wilcox Publisher. This book was released on 2015-12-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Auto Collision Repair and Refinishing details the latest collision repair and refinishing techniques. This comprehensive textbook presents both the theoretical and practical aspects of collision repair and refinishing in an easy-to-understand manner. It includes information on structural repair, nonstructural repair, mechanical and electrical repair, refinishing, and estmaing. Auto Collison Repar and Refinishing is an indispensable resource for those preparing for a career in collision repair and refinishing, as well as experienced technicians preparing for the ASE collision repair and refinishing certification tests. Organized around the NATEF Collision Repair Task List. Detailed chapters on mechanical systems allow you to recognize and repair common types of mechanical damage encountered in the collision repair shop. The extensive estimating chapter provides unsurpassed instruction on this vital task. Full-color photographs and illustrations are used throughout to enhance understanding. Chapter reviews contain both conventional questions and ASE-type questions.
Download or read book Automotive Technician Training Practical Worksheets Level 1 written by Tom Denton and published by Routledge. This book was released on 2015-06-12 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt: Automotive practical worksheets and assessments for students at Level 1 This Level 1 Student Worksheets book contains tasks that help you develop practical skills and prepare you for assessment. The tasks also reinforce the automotive theory that you will learn online and in the classroom. Each worksheet covers individual topics in a step-by-step manner, detailing how to carry out all of the most important tasks contained within the syllabus. Alongside each of these worksheets is a job card that can be filled in and used as evidence towards your qualification. Endorsed by the Institute of the Motor Industry for all of their Level 1 automotive courses. Step-by-step guides to the practical tasks required at all Level 1 qualifications. Job sheets for students to complete and feedback sheets for assessors to complete.
Download or read book Automotive Mechanic Entry written by and published by . This book was released on 1969 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Automotive Technician Training Level 3 written by Tom Denton and published by Routledge. This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Auto Fundamentals written by Martin W. Stockel and published by Goodheart-Wilcox Publisher. This book was released on 1996 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the most popular automotive theory texts available, "Auto Fundamentals" provides a study of the design, construction, and operation of all major automotive systems. Content centers around the theory of automotive operation--how and why systems interact.
Download or read book Automotive Technician Training Practical Worksheets Level 2 written by Tom Denton and published by Routledge. This book was released on 2015-06-12 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Automotive practical worksheets and assessments for students at Level 2 This Level 2 Student Worksheets book contains tasks that help you develop practical skills and prepare you for assessment. The tasks also reinforce the automotive theory that you will learn online and in the classroom. Each worksheet covers individual topics in a step-by-step manner, detailing how to carry out all of the most important tasks contained within the syllabus. Alongside each of these worksheets is a job card that can be filled in and used as evidence towards your qualification. Endorsed by the Institute of the Motor Industry for all of their Level 2 automotive courses. Step-by-step guides to the practical tasks required at all Level 2 qualifications. Job sheets for students to complete and feedback sheets for assessors to complete.
Download or read book A Practical Approach to Motor Vehicle Engineering and Maintenance written by Allan Bonnick and published by Routledge. This book was released on 2011-05-26 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fully updated and in line with latest specifications, this textbook integrates vehicle maintenance procedures, making it the indispensable first classroom and workshop text for all students of motor vehicle engineering, apprentices and keen amateurs. Its clear, logical approach, excellent illustrations and step-by-step development of theory and practice make this an accessible text for students of all abilities. With this book, students have information that they can trust because it is written by an experienced practitioner and lecturer in this area. This book will provide not only the information required to understand automotive engines but also background information that allows readers to put this information into context. The book contains flowcharts, diagnostic case studies, detailed diagrams of how systems operate and overview descriptions of how systems work. All this on top of step-by-step instructions and quick reference tables. Readers won't get bored when working through this book with questions and answers that aid learning and revision included.
