Download or read book Automation written by Microsoft Corporation and published by . This book was released on 1997 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Automation Programmer s Reference written by Microsoft Corporation and published by . This book was released on 1997 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Newly revised and expanded to include such topics as ActiveX controls, exposing and accessing ActiveX objects, Remote Automation, and Windows NT 4.0, "Automation Programmer's Reference" is the comprehensive and official reference documentation on Automation.
Download or read book OLE Automation Programmer s Reference written by Microsoft Press and published by . This book was released on 1996 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the comprehensive and official reference documentation on OLE, revised to incorporate OLE enhancements and bring them in line with 32-bit Windows 95 and Windows NT. Volume 2 concentrates on OLE Automation, the revolutionary capability of OLE that makes it possible to manipulate an application's objects from outside the application.
Download or read book Outlook 2000 VBA Programmer s Reference written by Dwayne Gifford and published by Wrox Press. This book was released on 1999 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: Outlook 2000 is an important part of the Office 2000 program suite, and is available in the Premium, Professional, Standard and Small Business editions of Office 2000. At present, most people use Outlook for sending and receiving emails and little else, however, Outlook 2000 is set to become a very powerful organizational tool. Outlook 2000 now hosts VBA (Visual Basic for Applications) and hence there is a strong emphasis on between-application automation, Using VBA, the user can program his or her own programmes in what is a subset of the Visual Basic programming languages.
Download or read book IEC 61131 3 Programming Industrial Automation Systems written by Karl-Heinz John and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: IEC 61131-3 gives a comprehensive introduction to the concepts and languages of the new standard used to program industrial control systems. A summary of the special programming requirements and the corresponding features in the IEC 61131-3 standard make it suitable for students as well as PLC experts. The material is presented in an easy-to-understand form using numerous examples, illustrations, and summary tables. There is also a purchaser's guide and a CD-ROM containing two reduced but functional versions of programming systems.
Download or read book OLE 2 Programmer s Reference Creating programmable applications with OLE automation written by Microsoft Corporation and published by . This book was released on 1993 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume II introduces OLE Automation, the hot new capability that makes it possible to manipulate an application's objects from outside the application. This book is key to learning how to create applications that expose programmable objects, and how to create tools that access and manipulate objects. Includes a reference of Automation interfaces and tools.
Download or read book Access 2010 Programmer s Reference written by Teresa Hennig and published by John Wiley & Sons. This book was released on 2010-10-28 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to programming for Access 2010 and 2007 Millions of people use the Access database applications, and hundreds of thousands of developers work with Access daily. Access 2010 brings better integration with SQL Server and enhanced XML support; this Wrox guide shows developers how to take advantage of these and other improvements. With in-depth coverage of VBA, macros, and other programming methods for building Access applications, this book also provides real-world code examples to demonstrate each topic. Access 2010 Programmer's Referenceis a comprehensive guide to the best-of-breed techniques for programming Access applications. Coverage Includes: Introduction to Microsoft Access 2010 New Features Upgrading and Converting to Access 2010 Macros in Access 2010 Using the VBA Editor VBA Basics Using VBA in Access Creating Classes in VBA Extending VBA with APIs Working with the Windows Registry Using DAO to Access Data Using ADO to Access Data Using SQL with VBA Using VBA to Enhance Forms Enhancing Reports with VBA Customizing the Ribbon Customizing the Office Backstage Working with Office 2010 Working with SharePoint Working with .NET Building Client-Server Applications with Access The Access 2010 Templates Access Runtime Deployment Database Security Access 2010 Security Features
Download or read book Access 2007 VBA Programmer s Reference written by Teresa Hennig and published by John Wiley & Sons. This book was released on 2011-06-01 with total page 1154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Access 2007 VBA Programmer's Reference covers a wide spectrum of programming topics relevant to Access. Although it assumes the reader has some familiarity with VBA programming language, it begins with a brief introduction to VBA. And to help you leverage the tools that Access provides, a chapter highlights the new features in Microsoft Office Access 2007 — including new wizards and GUI (graphical user interface) elements that previously required VBA code, as well as new VBA features. The book also discusses how to create and name variables, how to use Data Access Object (DAO) and ActiveX Data Object (ADO) to manipulate data both within Access and within other applications, proper error handling techniques, and advanced functions such as creating classes and using APIs. Key new objects such as using Macros and the Ribbon are explored, too, as are forms and reports, the two most powerful tools for working with and displaying data. Working with other applications is covered extensively both in a general nature and for working specifically with Microsoft Office applications, Windows SharePoint Services, and SQL Server. Of course, this book wouldn’t be complete without discussing security issues and the Developer Extensions.
Download or read book Windows Script Host Programmer s Reference written by Dino Esposito and published by Addison-Wesley Longman. This book was released on 1999 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Windows Scripting Host (WSH) is Microsoft's evolutionary answer to a much-needed programming environment for the Windows desktop. This reference is for system administrators and programmers who want to automate and have control over their Windows environment without writing compiled VB and VC++ applications.
Download or read book Elsevier s Dictionary of Automation Technics written by B. Zhelyazova and published by Elsevier. This book was released on 2005-04-28 with total page 1009 pages. Available in PDF, EPUB and Kindle. Book excerpt: This dictionary contains 13,000 terms with more than 4,000 cross-references used in the following fields: automation, technology of management and regulation, computing machine and data processing, computer control, automation of industry, laser technology, theory of information and theory of signals, theory of algorithms and programming, philosophical bases of cybernetics, cybernetics and mathematical methods.Automation pertains to the theory, art, or technique of making a machine, a process or a device more fully automatic. Computers and information processing equipment play a large role in the automation of a process because of the inherent ability of a computer to develop decision that will, in effect, control or govern the process from the information received by the computer concerning the status of the process. Thus automation pertains to both the theory, and techniques of using automatic systems in industrial applications and the processes of investigation, design and conversion to automatic methods. Automatic control, automatic materials handling, automatic testing, automatic packaging, for continuous as well as batch processing, are all considered parts of the overall or completely automatic process.The Dictionary consists of two parts, Basic Table and Indexes. In the first part the English terms are listed alphabetically, numbered consecutively and followed by its German, French and Russian equivalents. English synonyms appear as cross-references to the main entries in their proper alphabetical order. The second part of the Dictionary, the Indexes, contains separate alphabetical indexes of the German, French and Russian terms. The reference number(s) with each term stands for the number of the English term(s) in the basic table.Elsevier's Dictionary of Automatic Technics will be a valuable tool for specialists, scientists, students and everyone who takes interest in the problems of investigation devoted to the design, development, and applications of methods and techniques for rendering a process of group of machines self-actuating, self-moving, or self-controlling.
Download or read book The Pragmatic Programmer written by Andrew Hunt and published by Addison-Wesley Professional. This book was released on 1999-10-20 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: What others in the trenches say about The Pragmatic Programmer... “The cool thing about this book is that it’s great for keeping the programming process fresh. The book helps you to continue to grow and clearly comes from people who have been there.” — Kent Beck, author of Extreme Programming Explained: Embrace Change “I found this book to be a great mix of solid advice and wonderful analogies!” — Martin Fowler, author of Refactoring and UML Distilled “I would buy a copy, read it twice, then tell all my colleagues to run out and grab a copy. This is a book I would never loan because I would worry about it being lost.” — Kevin Ruland, Management Science, MSG-Logistics “The wisdom and practical experience of the authors is obvious. The topics presented are relevant and useful.... By far its greatest strength for me has been the outstanding analogies—tracer bullets, broken windows, and the fabulous helicopter-based explanation of the need for orthogonality, especially in a crisis situation. I have little doubt that this book will eventually become an excellent source of useful information for journeymen programmers and expert mentors alike.” — John Lakos, author of Large-Scale C++ Software Design “This is the sort of book I will buy a dozen copies of when it comes out so I can give it to my clients.” — Eric Vought, Software Engineer “Most modern books on software development fail to cover the basics of what makes a great software developer, instead spending their time on syntax or technology where in reality the greatest leverage possible for any software team is in having talented developers who really know their craft well. An excellent book.” — Pete McBreen, Independent Consultant “Since reading this book, I have implemented many of the practical suggestions and tips it contains. Across the board, they have saved my company time and money while helping me get my job done quicker! This should be a desktop reference for everyone who works with code for a living.” — Jared Richardson, Senior Software Developer, iRenaissance, Inc. “I would like to see this issued to every new employee at my company....” — Chris Cleeland, Senior Software Engineer, Object Computing, Inc. “If I’m putting together a project, it’s the authors of this book that I want. . . . And failing that I’d settle for people who’ve read their book.” — Ward Cunningham Straight from the programming trenches, The Pragmatic Programmer cuts through the increasing specialization and technicalities of modern software development to examine the core process--taking a requirement and producing working, maintainable code that delights its users. It covers topics ranging from personal responsibility and career development to architectural techniques for keeping your code flexible and easy to adapt and reuse. Read this book, and you'll learn how to Fight software rot; Avoid the trap of duplicating knowledge; Write flexible, dynamic, and adaptable code; Avoid programming by coincidence; Bullet-proof your code with contracts, assertions, and exceptions; Capture real requirements; Test ruthlessly and effectively; Delight your users; Build teams of pragmatic programmers; and Make your developments more precise with automation. Written as a series of self-contained sections and filled with entertaining anecdotes, thoughtful examples, and interesting analogies, The Pragmatic Programmer illustrates the best practices and major pitfalls of many different aspects of software development. Whether you're a new coder, an experienced programmer, or a manager responsible for software projects, use these lessons daily, and you'll quickly see improvements in personal productivity, accuracy, and job satisfaction. You'll learn skills and develop habits and attitudes that form the foundation for long-term success in your career. You'll become a Pragmatic Programmer.
Download or read book Industrial Robots Programming written by J. Norberto Pires and published by Springer Science & Business Media. This book was released on 2007-04-03 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Robots Programming focuses on designing and building robotic manufacturing cells, and explores the capabilities of today’s industrial equipment as well as the latest computer and software technologies. Special attention is given to the input devices and systems that create efficient human-machine interfaces, and how they help non-technical personnel perform necessary programming, control, and supervision tasks. Drawing upon years of practical experience and using numerous examples and illustrative applications, J. Norberto Pires covers robotics programming as it applies to: The current industrial robotic equipment including manipulators, control systems, and programming environments. Software interfaces that can be used to develop distributed industrial manufacturing cells and techniques which can be used to build interfaces between robots and computers. Real-world applications with examples designed and implemented recently in the lab. Industrial Robots Programming has been selected for indexing by Scopus. For more information about Industrial Robotics, please find the author's Industrial Robotics collection at the iTunesU University of Coimbra channel.
Download or read book Object Oriented Programming with SIMOTION written by Michael Braun and published by John Wiley & Sons. This book was released on 2017-06-27 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: In mechanical engineering the trend towards increasingly flexible solutions is leading to changes in control systems. The growth of mechatronic systems and modular functional units is placing high demands on software and its design. In the coming years, automation technology will experience the same transition that has already taken place in the PC world: a transition to more advanced and reproducible software design, simpler modification, and increasing modularity. This can only be achieved through object-oriented programming. This book is aimed at those who want to familiarize themselves with this development in automation technology. Whether mechanical engineers, technicians, or experienced automation engineers, it can help readers to understand and use object-oriented programming. From version 4.5, SIMOTION provides the option to use OOP in accordance with IEC 61131-3 ED3, the standard for programmable logic controllers. The book supports this way of thinking and programming and offers examples of various object-oriented techniques and their mechanisms. The examples are designed as a step-by-step process that produces a finished, ready-to-use machine module. Contents: Developments in the field of control engineering - General principles of object-oriented programming - Function blocks, methods, classes, interfaces - Modular software concepts - Object-oriented design, reusable and easy-to-maintain software, organizational and legal aspects, software tests - I/O references, namespaces, general references - Classes in SIMOTION, instantiation of classes and function blocks, compatible and efficient software - Introduction to SIMOTION and SIMOTION SCOUT.
Download or read book Software for Automation written by Jonas Berge and published by ISA. This book was released on 2005 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Network Programmability and Automation written by Matt Oswalt and published by "O'Reilly Media, Inc.". This book was released on 2022-06-23 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt: Network engineers are finding it harder than ever to rely solely on manual processes to get their jobs done. New protocols, technologies, delivery models, and the need for businesses to become more agile and flexible have made network automation essential. The updated second edition of this practical guide shows network engineers how to use a range of technologies and tools, including Linux, Python, APIs, and Git, to automate systems through code. This edition also includes brand new topics such as network development environments, cloud, programming with Go, and a reference network automation architecture. Network Programmability and Automation will help you automate tasks involved in configuring, managing, and operating network equipment, topologies, services, and connectivity. Through the course of the book, you'll learn the basic skills and tools you need to make this critical transition. You'll learn: Programming skills with Python and Go: data types, conditionals, loops, functions, and more How to work with Linux-based systems, the foundation for modern networking and cloud platforms Data formats and models: JSON, XML, YAML, and YANG Jinja templating for creating network device configurations The role of application programming interfaces (APIs) in network automation Source control with Git to manage code changes during the automation process Cloud-native technologies like Docker and Kubernetes How to automate network devices and services using Ansible, Salt, and Terraform Tools and technologies for developing and continuously integrating network automation
Download or read book Dictionary of Acronyms and Technical Abbreviations written by Jakob Vlietstra and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 703 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Dictionary covers information and communication technology (ICT), including hardware and software; information networks, including the Internet and the World Wide Web; automatic control; and ICT-related computer-aided fields. The Dictionary also lists abbreviated names of relevant organizations, conferences, symposia and workshops. This reference is important for all practitioners and users in the areas mentioned above, and those who consult or write technical material. This Second Edition contains 10,000 new entries, for a total of 33,000.
Download or read book The Automated Lighting Programmer s Handbook written by Brad Schiller and published by Taylor & Francis. This book was released on 2004 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: From basic principles of automated lighting, to pre-production preparations, the text details concepts, procedures, and guidelines to ensure a successful production. Then the author continues with in-depth explanations for beginning, intermediate, and advanced programmers. Additional sections explore troubleshooting principles, working relationships, and future technologies. For the final chapter of the book, the author interviewed many respected lighting industry veterans including John Broderick, Christian Choi, Laura Frank, Jim Lenahan, and Arnold Serame.
