Download or read book Automation and Control Trends written by Pedro Ponce and published by BoD – Books on Demand. This book was released on 2016-10-12 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an overview of the different paths automation and control engineering have taken lately, from a modern point of view. Built up with example chapters, this book provides some insight into the use of artificial intelligence and control theory on manufacturing, comfort analysis, reliability of modern digital systems, and the use of unusual reference and feedback signals as those coming from the brain. Nonetheless, some chapters are also devoted to a more traditional point of view of control theory, addressing complex problems where human intervention must be limited. Overall, this book is an effort to show that modern automation and control engineering are comprised by many diverse areas, which should interact in order to provide a complete result. In this way, as the systems become more complex and the control objectives more subjective, both, formal analytic and intelligent approaches, should be seen as complementary tools, not unrelated competitors. This books aim is precisely that of showing how broad and diverse the control objectives have become and how the abilities of the control engineer should be extended.

Download or read book Automation and Control Trends written by Pedro Ponce Cruz and published by . This book was released on 2016 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Robotics and Automation in Construction written by Carlos Balaguer and published by IntechOpen. This book was released on 2008-10-01 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses several issues related to the introduction of automaton and robotics in the construction industry in a collection of 23 chapters. The chapters are grouped in 3 main sections according to the theme or the type of technology they treat. Section I is dedicated to describe and analyse the main research challenges of Robotics and Automation in Construction (RAC). The second section consists of 12 chapters and is dedicated to the technologies and new developments employed to automate processes in the construction industry. Among these we have examples of ICT technologies used for purposes such as construction visualisation systems, added value management systems, construction materials and elements tracking using multiple IDs devices. This section also deals with Sensorial Systems and software used in the construction to improve the performances of machines such as cranes, and in improving Human-Machine Interfaces (MMI). Authors adopted Mixed and Augmented Reality in the MMI to ease the construction operations. Section III is dedicated to describe case studies of RAC and comprises 8 chapters. Among the eight chapters the section presents a robotic excavator and a semi-automated façade cleaning system. The section also presents work dedicated to enhancing the force of the workers in construction through the use of Robotic-powered exoskeletons and body joint-adapted assistive units, which allow the handling of greater loads.

Download or read book Intelligent Automation and Control written by Mohammad Jamshidi and published by . This book was released on 2000 with total page 725 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Industry 4 0 written by Carolina Machado and published by CRC Press. This book was released on 2020-05-17 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industry 4.0 is a challenge for today’s businesses. It’s a concept that encompasses the technological innovations of automation, control, and information technology, as it’s applied to manufacturing processes. It’s a new topic that recently emerged in academia and industry, with few books that target both management and engineering. This book will cover the new advances and the way to manage competitive organizations. The chapters will include terms of theory, evidence, and/or methodology, and significantly advance social scientific research. This book: Focuses on the latest and most recent research findings occurring on the topic of Industry 4.0 Presents the ways companies around the world are facing today's technological challenges Assists researchers and practitioners in selecting the correct options and strategies to manage competitive organizations Provides recent advances in international studies Encompasses the main technological innovations in the fields of automation, control, and information technology applied to the manufacturing processes Industry 4.0: Challenges, Trends, and Solutions in Manangment and Engineering is designed to increase the knowledge and effectiveness of all managers and engineers in all organizations and activity sectors Carolina Machado has been teaching in the Human Resources Management subjects since 1989 at University of Minho, Portugal. She has been an associate professor since 2004, with experience and research interest areas in the field of Human Resource Management, International Human Resource Management, Human Resource Management in SMEs, Training and Development, Emotional Intelligence, Management Change, Knowledge Management, and Management/HRM in the Digital Age. She is head of the Department of Management and head of the Human Resources Management Work Group at University of Minho, as well as chief editor of the International Journal of Applied Management Sciences and Engineering (IJAMSE). J. Paulo Davim is a professor at the Department of Mechanical Engineering of the University of Aveiro, Portugal. He has more than 30 years of teaching and research experience in Manufacturing, Materials, Mechanical, and Industrial Engineering, with special emphasis in Machining & Tribology. He has also interest in Management, Engineering Education, and Higher Education for Sustainability. He has worked as evaluator of projects for ERC (European Research Council) and other international research agencies.

Download or read book Drives and Control for Industrial Automation written by Kok Kiong Tan and published by Springer Science & Business Media. This book was released on 2010-11-16 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drives and Control for Industrial Automation presents the material necessary for an understanding of servo control in automation. Beginning with a macroscopic view of its subject, treating drives and control as parts of a single system, the book then pursues a detailed discussion of the major components of servo control: sensors, controllers and actuators. Throughout, the mechatronic approach – a synergistic integration of the components – is maintained, in keeping with current practice. The authors’ holistic approach does not preclude the reader from learning in a step-by-step fashion – each chapter contains material that can be studied separately without compromising understanding. Drives are described in several chapters according to the way they are usually classified in industry, each comprised of its actuators and sensors. The controller is discussed alongside. Topics of recent and current interest – piezoelectricity, digital communications and future trends – are detailed in their own chapters.

Download or read book Trends in Advanced Intelligent Control Optimization and Automation written by Wojciech Mitkowski and published by Springer. This book was released on 2017-06-06 with total page 883 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of the KKA 2017 – the 19th Polish Control Conference, organized by the Department of Automatics and Biomedical Engineering, AGH University of Science and Technology in Kraków, Poland on June 18–21, 2017, under the auspices of the Committee on Automatic Control and Robotics of the Polish Academy of Sciences, and the Commission for Engineering Sciences of the Polish Academy of Arts and Sciences. Part 1 deals with general issues of modeling and control, notably flow modeling and control, sliding mode, predictive, dual, etc. control. In turn, Part 2 focuses on optimization, estimation and prediction for control. Part 3 is concerned with autonomous vehicles, while Part 4 addresses applications. Part 5 discusses computer methods in control, and Part 6 examines fractional order calculus in the modeling and control of dynamic systems. Part 7 focuses on modern robotics. Part 8 deals with modeling and identification, while Part 9 deals with problems related to security, fault detection and diagnostics. Part 10 explores intelligent systems in automatic control, and Part 11 discusses the use of control tools and techniques in biomedical engineering. Lastly, Part 12 considers engineering education and teaching with regard to automatic control and robotics.

Download or read book Automation Trends in the Modern Production Market written by Automation and published by . This book was released on 1965 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Smart Connected Buildings Design Automation written by Mehdi Maasoumy and published by . This book was released on 2016-01-05 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: An in-depth overview of research activities in the field of smart buildings modeling, design automation and control. It will be of interest to industry professionals and researchers who work in the area of smart buildings, smart cities, and smart grid.

Download or read book Intelligent Automation and Control written by and published by . This book was released on 1998 with total page 851 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book CONTROL SYSTEMS ROBOTICS AND AUTOMATION Volume XIX written by Heinz D. Unbehauen and published by EOLSS Publications. This book was released on 2009-10-11 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Encyclopedia of Control Systems, Robotics, and Automation is a component of the global Encyclopedia of Life Support Systems EOLSS, which is an integrated compendium of twenty one Encyclopedias. This 22-volume set contains 240 chapters, each of size 5000-30000 words, with perspectives, applications and extensive illustrations. It is the only publication of its kind carrying state-of-the-art knowledge in the fields of Control Systems, Robotics, and Automation and is aimed, by virtue of the several applications, at the following five major target audiences: University and College Students, Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers and NGOs.

Download or read book Robotics Automation and Control in Industrial and Service Settings written by Luo, Zongwei and published by IGI Global. This book was released on 2015-09-10 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: ###############################################################################################################################################################################################################################################################

Download or read book Automation Technology and Human Performance written by Mark W. Scerbo and published by CRC Press. This book was released on 1998-10-01 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last 20 years, human factors researchers and developers have begun to examine more closely the impact that automation technology has on human performance. Many of the promises of automation have been realized in increased efficiency and in extending human capabilities. On the other hand, automation has fallen short of expectations of issues of safety and workload reduction. Recent research shows that automation alters the roles of operators and machines. As automated systems perform more and varied functions, humans are left with new kinds of responsibilities that often lead to decreases in situation awareness, increased mental workload, poorer monitoring efficiency, and a degraded ability to intervene and exercise manual control when automated systems fail. The papers in this volume are from the Third Automation Technology and Human Performance Conference held in Norfolk, VA, on March 25-28, 1998. They are a representative sample of current experimental and investigative research concerned with the effects of automation and technology on human performance. Topics cover a variety of domains such as aviation, air traffic control, medical systems, and surface transportation, as well as user concerns such as situation awareness, stress and workload, and monitoring and vigilance behavior. Other sections address methodology and design issues. Further, the topics address both theoretical and applied aspects of human interaction with technology.

Download or read book Intelligent Automation and Control written by Mohammad Jamshidi and published by . This book was released on 1996 with total page 832 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Drives and Control for Industrial Automation written by Kok Kiong Tan and published by Springer. This book was released on 2011-04-08 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drives and Control for Industrial Automation presents the material necessary for an understanding of servo control in automation. Beginning with a macroscopic view of its subject, treating drives and control as parts of a single system, the book then pursues a detailed discussion of the major components of servo control: sensors, controllers and actuators. Throughout, the mechatronic approach – a synergistic integration of the components – is maintained, in keeping with current practice. The authors’ holistic approach does not preclude the reader from learning in a step-by-step fashion – each chapter contains material that can be studied separately without compromising understanding. Drives are described in several chapters according to the way they are usually classified in industry, each comprised of its actuators and sensors. The controller is discussed alongside. Topics of recent and current interest – piezoelectricity, digital communications and future trends – are detailed in their own chapters.

Download or read book Disruptive Trends in Automation Technology written by and published by . This book was released on 2024-05-28 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book EAI International Conference on Automation and Control in Theory and Practice written by Michal Balog and published by Springer Nature. This book was released on 2023-09-09 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 15th EAI International Conference on Automation and Control in Theory and Practice (ARTEP 2023), held in Stará Lesná, Slovakia, February 8-10, 2023. The aim of the conference was to meet the experts in the field of control, industrial automation and ICT in the industry from universities, colleges, and practice. The conference aims to draw attention to modern trends in the field, to enable experts, pedagogues and scientific researchers to present the results achieved in their work, to exchange experiences and establish working contacts between meeting participants. The ARTEP proceedings includes papers on automation and control and their integration of technologies such as Industry 4.0, robotics, and IoT. ARTEP is primarily a conference for scientists and practitioners who develop and study automation, management, and technologies.