Download or read book Automatic Control of Bioprocesses written by Denis Dochain and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: Giving an overview of the challenges in the control of bioprocesses, this comprehensive book presents key results in various fields, including: dynamic modeling; dynamic properties of bioprocess models; software sensors designed for the on-line estimation of parameters and state variables; control and supervision of bioprocesses.
Download or read book Control in Bioprocessing written by Pablo A. López Pérez and published by John Wiley & Sons. This book was released on 2020-03-03 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Closes the gap between bioscience and mathematics-based process engineering This book presents the most commonly employed approaches in the control of bioprocesses. It discusses the role that control theory plays in understanding the mechanisms of cellular and metabolic processes, and presents key results in various fields such as dynamic modeling, dynamic properties of bioprocess models, software sensors designed for the online estimation of parameters and state variables, and control and supervision of bioprocesses Control in Bioengineering and Bioprocessing: Modeling, Estimation and the Use of Sensors is divided into three sections. Part I, Mathematical preliminaries and overview of the control and monitoring of bioprocess, provides a general overview of the control and monitoring of bioprocesses, and introduces the mathematical framework necessary for the analysis and characterization of bioprocess dynamics. Part II, Observability and control concepts, presents the observability concepts which form the basis of design online estimation algorithms (software sensor) for bioprocesses, and reviews controllability of these concepts, including automatic feedback control systems. Part III, Software sensors and observer-based control schemes for bioprocesses, features six application cases including dynamic behavior of 3-dimensional continuous bioreactors; observability analysis applied to 2D and 3D bioreactors with inhibitory and non-inhibitory models; and regulation of a continuously stirred bioreactor via modeling error compensation. Applicable across all areas of bioprocess engineering, including food and beverages, biofuels and renewable energy, pharmaceuticals and nutraceuticals, fermentation systems, product separation technologies, wastewater and solid-waste treatment technology, and bioremediation Provides a clear explanation of the mass-balance–based mathematical modelling of bioprocesses and the main tools for its dynamic analysis Offers industry-based applications on: myco-diesel for implementing "quality" of observability; developing a virtual sensor based on the Just-In-Time Model to monitor biological control systems; and virtual sensor design for state estimation in a photocatalytic bioreactor for hydrogen production Control in Bioengineering and Bioprocessing is intended as a foundational text for graduate level students in bioengineering, as well as a reference text for researchers, engineers, and other practitioners interested in the field of estimation and control of bioprocesses.
Download or read book Bioreactors written by Goutam Saha and published by CRC Press. This book was released on 2017-12-01 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioreactors: Animal Cell Culture Control for Bioprocess Engineering presents the design, fabrication, and control of a new type of bioreactor meant especially for animal cell line culture. The new bioreactor, called the "see-saw bioreactor," is ideal for the growth of cells with a sensitive membrane. The see-saw bioreactor derives its name from its principle of operation in which liquid columns in either limb of the reactor alternately go up and down. The working volume of the reactor is small, to within 15 L. However, it can easily be scaled up for large production in volume of cell mass in the drug and pharmaceutical industries. The authors describe the principle of operation of the see-saw bioreactor and how to automatically control the bioprocess. They discuss different control strategies as well as the thorough experimental research they conducted on this prototype bioreactor in which they applied a time delay control for yield maximization. To give you a complete understanding of the design and development of the see-saw bioreactor, the authors cover the mathematical model they use to describe the kinetics of fermentation, the genetic algorithms used for deriving the optimal time trajectories of the bioprocess variables, and the corresponding control inputs for maximizing the product yield. One chapter is devoted to the application of time delay control. Following a description of the bioreactor’s working setup in the laboratory, the authors sum up their investigation and define the future scope of work in terms of design, control, and software sensors.
Download or read book Measurement Monitoring Modelling and Control of Bioprocesses written by Carl-Fredrik Mandenius and published by Springer. This book was released on 2014-07-08 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Automated Measurement and Monitoring of Bioprocesses: Key Elements of the M3C Strategy, by Bernhard Sonnleitner Automatic Control of Bioprocesses, by Marc Stanke, Bernd Hitzmann An Advanced Monitoring Platform for Rational Design of Recombinant Processes, by G. Striedner, K. Bayer Modelling Approaches for Bio-Manufacturing Operations, by Sunil Chhatre Extreme Scale-Down Approaches for Rapid Chromatography Column Design and Scale-Up During Bioprocess Development, by Sunil Chhatre Applying Mechanistic Models in Bioprocess Development, by Rita Lencastre Fernandes, Vijaya Krishna Bodla, Magnus Carlquist, Anna-Lena Heins, Anna Eliasson Lantz, Gürkan Sin and Krist V. Gernaey Multivariate Data Analysis for Advancing the Interpretation of Bioprocess Measurement and Monitoring Data, by Jarka Glassey Design of Pathway-Level Bioprocess Monitoring and Control Strategies Supported by Metabolic Networks, by Inês A. Isidro, Ana R. Ferreira, João J. Clemente, António E. Cunha, João M. L. Dias, Rui Oliveira Knowledge Management and Process Monitoring of Pharmaceutical Processes in the Quality by Design Paradigm, by Anurag S Rathore, Anshuman Bansal, Jaspinder Hans The Choice of Suitable Online Analytical Techniques and Data Processing for Monitoring of Bioprocesses, by Ian Marison, Siobhán Hennessy, Róisín Foley, Moira Schuler, Senthilkumar Sivaprakasam, Brian Freeland
Download or read book Bioprocess Monitoring and Control written by Marie-Noelle Pons and published by Oxford University Press, USA. This book was released on 1992 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first comprehensive volume on bioprocess automation and control. It addresses bioprocess engineers and biotechnologists seeking information about new devices and advanced control techniques, including those who are not be specialists in process control. It also offers guidance for control engineers who are used to classical problems in mechanical, electrical, or chemical engineering but who may not be familiar with the specifics of nonlinear, time-dependent bioprocesses and the instrumentation required to monitor them. The book begins with the development and analysis of control structures and describes available biosensors. Underlying soft sensor estimation techniques are outlined along with methods for using derived information. The coverage of industrial applications treats both low-level control loops (temperature, pH, etc.) and high-level control strategies (setpoint optimization, optimal trajectories, adaptive control, etc.). The international team of authors detail each topic in a thorough and complete manner, and provide an important source of information for both experienced users and those new to computer controlled fermentation systems. The intended readership includes chemical, control and bioprocess engineers; biochemists and biologists; and graduate students in biotechnology.
Download or read book Control in Bioprocessing written by Pablo A. López Pérez and published by John Wiley & Sons. This book was released on 2020-03-10 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Closes the gap between bioscience and mathematics-based process engineering This book presents the most commonly employed approaches in the control of bioprocesses. It discusses the role that control theory plays in understanding the mechanisms of cellular and metabolic processes, and presents key results in various fields such as dynamic modeling, dynamic properties of bioprocess models, software sensors designed for the online estimation of parameters and state variables, and control and supervision of bioprocesses Control in Bioengineering and Bioprocessing: Modeling, Estimation and the Use of Sensors is divided into three sections. Part I, Mathematical preliminaries and overview of the control and monitoring of bioprocess, provides a general overview of the control and monitoring of bioprocesses, and introduces the mathematical framework necessary for the analysis and characterization of bioprocess dynamics. Part II, Observability and control concepts, presents the observability concepts which form the basis of design online estimation algorithms (software sensor) for bioprocesses, and reviews controllability of these concepts, including automatic feedback control systems. Part III, Software sensors and observer-based control schemes for bioprocesses, features six application cases including dynamic behavior of 3-dimensional continuous bioreactors; observability analysis applied to 2D and 3D bioreactors with inhibitory and non-inhibitory models; and regulation of a continuously stirred bioreactor via modeling error compensation. Applicable across all areas of bioprocess engineering, including food and beverages, biofuels and renewable energy, pharmaceuticals and nutraceuticals, fermentation systems, product separation technologies, wastewater and solid-waste treatment technology, and bioremediation Provides a clear explanation of the mass-balance–based mathematical modelling of bioprocesses and the main tools for its dynamic analysis Offers industry-based applications on: myco-diesel for implementing "quality" of observability; developing a virtual sensor based on the Just-In-Time Model to monitor biological control systems; and virtual sensor design for state estimation in a photocatalytic bioreactor for hydrogen production Control in Bioengineering and Bioprocessing is intended as a foundational text for graduate level students in bioengineering, as well as a reference text for researchers, engineers, and other practitioners interested in the field of estimation and control of bioprocesses.
Download or read book Bioprocess Engineering Principles written by Pauline M. Doran and published by Elsevier. This book was released on 1995-04-03 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: The emergence and refinement of techniques in molecular biology has changed our perceptions of medicine, agriculture and environmental management. Scientific breakthroughs in gene expression, protein engineering and cell fusion are being translated by a strengthening biotechnology industry into revolutionary new products and services. Many a student has been enticed by the promise of biotechnology and the excitement of being near the cutting edge of scientific advancement. However, graduates trained in molecular biology and cell manipulation soon realise that these techniques are only part of the picture. Reaping the full benefits of biotechnology requires manufacturing capability involving the large-scale processing of biological material. Increasingly, biotechnologists are being employed by companies to work in co-operation with chemical engineers to achieve pragmatic commercial goals. For many years aspects of biochemistry and molecular genetics have been included in chemical engineering curricula, yet there has been little attempt until recently to teach aspects of engineering applicable to process design to biotechnologists. This textbook is the first to present the principles of bioprocess engineering in a way that is accessible to biological scientists. Other texts on bioprocess engineering currently available assume that the reader already has engineering training. On the other hand, chemical engineering textbooks do not consider examples from bioprocessing, and are written almost exclusively with the petroleum and chemical industries in mind. This publication explains process analysis from an engineering point of view, but refers exclusively to the treatment of biological systems. Over 170 problems and worked examples encompass a wide range of applications, including recombinant cells, plant and animal cell cultures, immobilised catalysts as well as traditional fermentation systems. * * First book to present the principles of bioprocess engineering in a way that is accessible to biological scientists * Explains process analysis from an engineering point of view, but uses worked examples relating to biological systems * Comprehensive, single-authored * 170 problems and worked examples encompass a wide range of applications, involving recombinant plant and animal cell cultures, immobilized catalysts, and traditional fermentation systems * 13 chapters, organized according to engineering sub-disciplines, are groupled in four sections - Introduction, Material and Energy Balances, Physical Processes, and Reactions and Reactors * Each chapter includes a set of problems and exercises for the student, key references, and a list of suggestions for further reading * Includes useful appendices, detailing conversion factors, physical and chemical property data, steam tables, mathematical rules, and a list of symbols used * Suitable for course adoption - follows closely curricula used on most bioprocessing and process biotechnology courses at senior undergraduate and graduate levels.
Download or read book Bioprocessing Technology for Production of Biopharmaceuticals and Bioproducts written by Claire Komives and published by John Wiley & Sons. This book was released on 2018-12-27 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written for industrial and academic researchers and development scientists in the life sciences industry, Bioprocessing Technology for Production of Biopharmaceuticals and Bioproducts is a guide to the tools, approaches, and useful developments in bioprocessing. This important guide: • Summarizes state-of-the-art bioprocessing methods and reviews applications in life science industries • Includes illustrative case studies that review six milestone bio-products • Discuses a wide selection of host strain types and disruptive bioprocess technologies
Download or read book Automatic Control of Bioprocesses written by Denis Dochain and published by Wiley-ISTE. This book was released on 2008-08-25 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Giving an overview of the challenges in the control of bioprocesses, this comprehensive book presents key results in various fields, including: dynamic modeling; dynamic properties of bioprocess models; software sensors designed for the on-line estimation of parameters and state variables; control and supervision of bioprocesses.
Download or read book New Directions in Bioprocess Modeling and Control written by Michael A. Boudreau and published by ISA. This book was released on 2007 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Models offer benefits even before they are put on line. Based on years of experience, the authors reveal in New Directions in Bioprocess Modeling and Control that significant improvements can result from the process knowledge and insight that are gained when building experimental and first-principle models for process monitoring and control. Doing modeling in the process development and early commercialization phases is advantageous because it increases process efficiency and provides ongoing opportunities for improving process control. This technology is important for maximizing benefits from analyzers and control tool investments. If you are a process design, quality control, information systems, or automation engineer in the biopharmaceutical, brewing, or bio-fuel industry, this handy resource will help you define, develop, and apply a virtual plant, model predictive control, first-principle models, neural networks, and multivariate statistical process control. The synergistic knowledge discovery on bench top or pilot plant scale can be ported to industrial scale processes. This learning process is consistent with the intent in the Process Analyzer and Process Control Tools sections of the FDA_s Guidance for Industry PAT _ A Framework for Innovative Pharmaceutical Development, Manufacturing and Quality Assurance. It states in the Process Analyzer section of the FDA_s guidance: _For certain applications, sensor-based measurements can provide a useful process signature that may be related to the underlying process steps or transformations. Based on the level of process understanding these signatures may also be useful for the process monitoring, control, and end point determination when these patterns or signatures relate to product and process quality._
Download or read book Bioprocess Monitoring and Control written by Marie-No?lle Pons and published by Wiley. This book was released on 1993-11-04 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive, contributed work concerned with bioprocess automation and control. Commences with generation and analysis of control structure, emphasizing biosensors with a penetrating look at available devices. Profiles underlying soft sensor estimation techniques as well as those for use in derived information. Illustrated applications treat either low level control loops or high level control strategies. Introduces new trends in process automation such as expert systems and neural networks, discussing their future in biotechnology.
Download or read book Integrated Bioprocess Engineering written by Clemens Posten and published by Walter de Gruyter GmbH & Co KG. This book was released on 2024-07-01 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioprocess engineering employs microorganisms to produce biological products for medical and industrial applications. The book covers engineering tasks around- the cultivation process in bioreactors including media design, feeding strategies, or cell harvesting. All aspects are described from the conceptual considerations to technical realization and provide insight by detailed explanations, drawings, formulas, and example processes.
Download or read book Bioprocess Monitoring and Control written by Bernd Hitzmann and published by . This book was released on 2020-09-10 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process monitoring and control are fundamental to all processes; this holds especially for bioprocesses, due to their complex nature. Usually, bioprocesses deal with living cells, which have their own regulatory systems. It helps to adjust the cell to its environmental condition. This must not be the optimal condition that the cell needs to produce whatever is desired. Therefore, a close monitoring of the cell and its environment is essential to provide optimal conditions for production. Without measurement, no information of the current process state is obtained. In this book, methods and techniques are provided for the monitoring and control of bioprocesses. From new developments for sensors, the application of spectroscopy and modelling approaches, the estimation and observer implementation for ethanol production and the development and scale-up of various bioprocesses and their closed loop control information are presented. The processes discussed here are very diverse. The major applications are cultivation processes, where microorganisms were grown, but also an incubation process of bird's eggs, as well as an indoor climate control for humans, will be discussed. Altogether, in 12 chapters, nine original research papers and three reviews are presented.
Download or read book Computational Intelligence Techniques for Bioprocess Modelling Supervision and Control written by Maria Carmo Nicoletti and published by Springer. This book was released on 2009-07-09 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Intelligence (CI) and Bioprocess are well-established research areas which have much to offer each other. Under the perspective of the CI area, Biop- cess can be considered a vast application area with a growing number of complex and challenging tasks to be dealt with, whose solutions can contribute to boosting the development of new intelligent techniques as well as to help the refinement and s- cialization of many of the already existing techniques. Under the perspective of the Bioprocess area, CI can be considered a useful repertoire of theories, methods and techniques that can contribute and offer interesting alternative approaches for solving many of its problems, particularly those hard to solve using conventional techniques. Although throughout the past years CI and Bioprocess areas have accumulated substantial specific knowledge and progress has been quick and with a high degree of success, we believe there is still a long way to go in order to use the potentialities of the available CI techniques and knowledge at their full extent, as tools for supporting problem solving in bioprocesses. One of the reasons is the fact that both areas have progressed steadily and have been continuously accumulating and refining specific knowledge; another reason is the high level of technical expertise demanded by each of them. The acquisition of technical skills, experience and good insights in either of the two areas is very demanding and a hard task to be accomplished by any professional.
Download or read book Bioprocess Parameter Control written by Pramod Agrawal and published by Springer. This book was released on 1984 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bespreking van fysische en chemische parameters met betrekking tot microbiele groei; analyses van diverse regelprocessen voor "continu" bioreactor (continue toevoer van voedingsstoffen gedurende het proces en ter afvoer van gedeeltes van het medium ter instandhouding van een constant volume); modelstudie en simulatie van bioreactor-procestechniek; bewerkingstechnieken in microbiele processen (toevoeging van voedingsstoffen in de bioreactor, gedurende het proces), waarbij het produkt tot aan het eind van het proces in de reactor aanwezig blijft
Download or read book New Developments in Robotics Automation and Control written by Alex Lazinica and published by BoD – Books on Demand. This book was released on 2008-10-01 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book represents the contributions of the top researchers in the field of robotics, automation and control and will serve as a valuable tool for professionals in these interdisciplinary fields. It consists of 25 chapter that introduce both basic research and advanced developments covering the topics such as kinematics, dynamic analysis, accuracy, optimization design, modelling , simulation and control. Without a doubt, the book covers a great deal of recent research, and as such it works as a valuable source for researchers interested in the involved subjects.
Download or read book On line Estimation and Adaptive Control of Bioreactors written by G. Bastin and published by Elsevier. This book was released on 2013-10-22 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with monitoring and control of biotechnological processes. Different methods are proposed which are based on the nonlinear structure of the process and do not require any a priori knowledge of the fermentation parameters. The theoretical stability and convergence properties of the proposed algorithms are analysed and their performances are illustrated by simulation results and, in many instances, by real life experiments. The concept of software sensors is introduced; these are algorithms based on the nonlinear model of the process and designed for on-line estimation of the biological variables and/or the fermentation parameters. In order to deal with process nonstationarities and parameter uncertainties, reference is made to adaptive estimation and control techniques.The book is the result of an intensive joint research effort by the authors during the last decade. It is intended as a graduate level text for students of bioengineering as well as a reference text for scientists and engineers involved in the design and optimization of bioprocesses.
