Download or read book Automated Stream Analysis for Process Control V1 written by Dan Manka and published by Elsevier. This book was released on 2012-12-02 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Automated Stream Analysis for Process Control, Volume 1 provides information pertinent to stream analyzers and its elements, including the system, construction, control, and operation. This book examines the results of the analysis, which must be used properly by the computer in order to regulate the process controls so that the process stream will obtain its ultimate goal. Organized into 12 chapters, this volume starts with an overview of the uses of liquid flow-injection analytical devices in process control applications within the chemical production plant. This text then examines the initial two techniques, namely, ion chromatography and ion exclusion chromatography that are used to analyze over 90 varieties of ions down to part-per-billion in aqueous streams in laboratory applications in academic, government, and industrial laboratories. Other chapters consider monitoring of gas streams generated from process development units. Chemists, chemical engineers, analytical chemists, as well as laboratory and plant managers will find this book extremely useful.
Download or read book Automated Sample Preparation written by Hans-Joachim Hubschmann and published by John Wiley & Sons. This book was released on 2022-02-22 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: An essential guide to the proven automated sample preparation process While the measurement step in sample preparation is automated, the sample handling step is manual and all too often open to risk and errors. The manual process is of concern for accessing data quality as well as producing limited reproducibility and comparability. Handbook of Automated Sample Preparation for CG-MS and LC-MS explores the advantages of implementing automated sample preparation during the handling phase for CG-MS and LC-MS. The author, a noted expert on the topic, includes information on the proven workflows that can be put in place for many routine and regulated analytical methods. This book offers a guide to automated workflows for both on-line and off-line sample preparation. This process has proven to deliver consistent and comparable data quality, increased sample amounts, and improved cost efficiency. In addition, the process follows Standard Operation Procedures that are essential for audited laboratories. This important book: Provides the information and tools needed for the implementation of instrumental sample preparation workflows Offers proven and detailed examples that can be adapted in analytical laboratories Shows how automated sample preparation can reduce cost per sample, increase sample amounts, and produce faster results Includes illustrative examples from various fields such as chemistry to food safety and pharmaceuticals Written for personnel in analytical industry, pharmaceutical, and medical laboratories, Handbook of Automated Sample Preparation for CG-MS and LC-MS offers the much-needed tools for implementing the automated sample preparation for analytical laboratories.
Download or read book Introduction to Analytical Gas Chromatography Revised and Expanded written by Raymond P.W. Scott and published by CRC Press. This book was released on 2017-12-19 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering the principles of chromatographic separation, the chromatographic process from a physical chemical perspective, instrumentation for performing analyses, and operational procedures, this second edition offers information needed for the successful practice of gas chromatography. It contains examples of available apparatus, detectors, columns, stationary phases and operating conditions.
Download or read book Gas Chromatography written by Peter Kusch and published by BoD – Books on Demand. This book was released on 2019-09-04 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas chromatography (GC) is one of the most important types of chromatography used in analytical chemistry for separating and analyzing chemical organic compounds. Today, gas chromatography is one of the most widespread investigation methods of instrumental analysis. This technique is used in the laboratories of chemical, petrochemical, and pharmaceutical industries, in research institutes, and also in clinical, environmental, and food and beverage analysis. This book is the outcome of contributions by experts in the field of gas chromatography and includes a short history of gas chromatography, an overview of derivatization methods and sample preparation techniques, a comprehensive study on pyrazole mass spectrometric fragmentation, and a GC/MS/MS method for the determination and quantification of pesticide residues in grape samples.
Download or read book Comprehensive Two Dimensional Gas Chromatography written by Lourdes Ramos and published by Elsevier. This book was released on 2009-07-22 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book reviews the basic concepts and highlights the most relevant advances and developments that have taken place in the field of comprehensive two dimensional gas chromatography (GC x GC) since its introduction in 1991. The several instrumental and technical approaches assayed and developed during these seventeen years and that have contributed to the development of this powerful separation technique and to its increasing application in many areas is explained and comprehensively illustrated through a number of chapters devoted these specific topics. More specialized aspects of the technique, including theoretical aspects, modelization of the chromatographic process, software developments, and alternative couplings is also covered. Finally, special attention is paid to data treatment, for both qualitative and quantitative analysis. This book will be a practical resource that will explain from basic to specialized concepts of GC x GC and will show the current state-of-the-art and discuss future trends of this technique. - Outlines basic concepts and principles of GCxGC technique for non-specialists to apply the technique to their research - Provides detailed descriptions of recent technical advances and serves as an instructional guide in latest applications in GCxGC - Sets the scene for possible future development and alternative new applications of technique
Download or read book Practical Gas Chromatography written by Katja Dettmer-Wilde and published by Springer. This book was released on 2014-11-05 with total page 904 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas chromatography continues to be one of the most widely used analytical techniques, since its applications today expand into fields such as biomarker research or metabolomics. This new practical textbook enables the reader to make full use of gas chromatography. Essential fundamentals and their implications for the practical work at the instrument are provided, as well as details on the instrumentation such as inlet systems, columns and detectors. Specialized techniques from all aspects of GC are introduced ranging from sample preparation, solvent-free injection techniques, and pyrolysis GC, to separation including fast GC and comprehensive GCxGC and finally detection, such as GC-MS and element-specific detection. Various fields of application such as enantiomer, food, flavor and fragrance analysis, physicochemical measurements, forensic toxicology, and clinical analysis are discussed as well as cutting-edge application in metabolomics is covered.
Download or read book Multiway Data Analysis written by R. Coppi and published by North Holland. This book was released on 1989 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book collects together 45 papers covering various aspects of the analysis of multiway data arrays. Mathematical properties of three-way and multiway arrays are investigated and their utilization for the statistical interpretation of complex data sets is emphasized. The volume is divided into 5 chapters. A specific introduction to each chapter has been prepared by the Editorial Board. Different methods of analysis are considered including: longitudinal and multimode factor analysis, generalized canonical analysis, multidimensional scaling, multiway classification techniques, model based approaches. The reader can find many original contributions to this area, as well as interesting applications in several fields of research such as psychology, economics, sociology and bio-medicine.
Download or read book Basic Gas Chromatography written by Harold M. McNair and published by John Wiley & Sons. This book was released on 2011-09-20 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: The New Edition of the Well-Regarded Handbook on Gas Chromatography Since the publication of the highly successful first edition of Basic Gas Chromatography, the practice of chromatography has undergone several notable developments. Basic Gas Chromatography, Second Edition covers the latest in the field, giving readers the most up-to-date guide available, while maintaining the first edition's practical, applied approach to the subject and its accessibility to a wide range of readers. The text provides comprehensive coverage of basic topics in the field, such as stationary phases, packed columns and inlets, capillary columns and inlets, detectors, and qualitative and quantitative analysis. At the same time, the coverage also features key additions and updated topics including: Gas chromatography-mass spectrometry (GC-MS) Sampling methods Multidimensional gas chromatography Fast gas chromatography Gas chromatography analysis of nonvolatile compounds Inverse gas chromatography and pyrolysis gas chromatography Along with these new and updated topics, the references, resources, and Web sites in Basic Gas Chromatography have been revised to reflect the state of the field. Concise and fundamental in its coverage, Basic Gas Chromatography, Second Edition remains the standard handbook for everyone from undergraduates studying analytical chemistry to working industrial chemists.
Download or read book Automated Stream Analysis for Process Control written by Dan P. Manka and published by . This book was released on 1982 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modern Practice of Gas Chromatography written by Robert L. Grob, PhD and published by John Wiley & Sons. This book was released on 2004-08-04 with total page 1059 pages. Available in PDF, EPUB and Kindle. Book excerpt: The bible of gas chromatography-offering everything the professional and the novice need to know about running, maintaining, and interpreting the results from GC Analytical chemists, technicians, and scientists in allied disciplines have come to regard Modern Practice of Gas Chomatography as the standard reference in gas chromatography. In addition to serving as an invaluable reference for the experienced practitioner, this bestselling work provides the beginner with a solid understanding of gas chromatographic theory and basic techniques. This new Fourth Edition incorporates the most recent developments in the field, including entirely new chapters on gas chromatography/mass spectrometry (GC/MS); optimization of separations and computer assistance; high speed or fast gas chromatography; mobile phase requirements: gas system requirements and sample preparation techniques; qualitative and quantitative analysis by GC; updated information on detectors; validation and QA/QC of chromatographic methods; and useful hints for good gas chromatography. As in previous editions, contributing authors have been chosen for their expertise and active participation in their respective areas. Modern Practice of Gas Chromatography, Fourth Edition presents a well-rounded and comprehensive overview of the current state of this important technology, providing a practical reference that will greatly appeal to both experienced chomatographers and novices.
Download or read book Plant Metabolomics written by Kazuki Saito and published by Springer Science & Business Media. This book was released on 2006-06-29 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metabolomics – which deals with all metabolites of an organism – is a rapidly-emerging sector of post-genome research fields. It plays significant roles in a variety of fields from medicine to agriculture and holds a fundamental position in functional genomics studies and their application in plant biotechnology. This volume comprehensively covers plant metabolomics for the first time. The chapters offer cutting-edge information on analytical technology, bioinformatics and applications. They were all written by leading researchers who have been directly involved in plant metabolomics research throughout the world. Up-to-date information and future developments are described, thereby producing a volume which is a landmark of plant metabolomics research and a beneficial guideline to graduate students and researchers in academia, industry, and technology transfer organizations in all plant science fields.
Download or read book Automatic Chemical Analysis written by Ralph Holcombe Müller and published by . This book was released on 1960 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Automatic Methods of Analysis written by M. Valcárcel and published by Elsevier. This book was released on 1988-08-01 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new monograph provides a comprehensive overview of the state of the art of the automation of laboratory processes in analytical chemistry. The topics have been chosen according to such criteria as the degree of consolidation, scope of application and most promising trends.The first part of the book begins with the basic principles behind the automation of laboratory processes, then describes automatic systems for sampling and sample treatment. In the second part the principal types of analysers are discussed: continuous, batch and robotic. The third part is devoted to the automation of analytical instrumentation: spectroscopic, electroanalytical and chromatographic techniques and titrators. The last part presents some examples of the application of automation to clinical chemistry, environmental pollution monitoring and industrial process control.The text is supplemented by 290 figures and 800 literature references. It is written primarily for scientists directly involved in laboratory work and those responsible for industrial planning and control, research centres, etc. It will also be of interest to analytical chemists wishing to update their knowledge in this area, and will be of especial interest to scientists directly related to environmental sciences or clinical chemistry.
Download or read book Quantitative Gas Chromatography for Laboratory Analyses and On Line Process Control written by G. Guiochon and published by Elsevier. This book was released on 1988-06-01 with total page 811 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here is an invaluable new book on quantitative gas chromatography which explains how the method can - or should - be used for accurate and precise analysis. Gas chromatography is firmly established as one of the few major methods for the quantitative analysis of complex mixtures. It is fast, accurate and inexpensive, with a broad range of applications. It has however become very complex and involved: over 200 stationary phases, more than 10 detector principles and several very different column types are available from among the catalogs of over 100 manufacturers and major retailers. The progressive changes in the nature of gas chromatography have created new needs for information which are not satisfied by the literature presently available.This book provides a complete discussion of all the problems involved in the achievement of quantitative analysis by gas chromatography, whether in the research laboratory, in the routine analysis laboratory or in process control. For this reason the presentation of theoretical concepts has been limited to the essential, while extensive explanations have been devoted to the various steps involved in the derivation of precise and accurate data. This starts with the selection of the instrumentation and column, continues with the choice of optimum experimental conditions, then calibration and ends with the use of correct procedures for data acquisition and calculations. Finally, there is almost always a way to reduce errors and an entire chapter deals with this single issue. Numerous relevant examples are presented.The first part of the book presents the theoretical background, simple enough to be understood by all analytical chemists, but still complete and up-to-date. It discusses the problems of flow dynamics, retention and band broadening. The changes in band profile associated with column overloading are explained without much recourse to mathematics. The second part describes the gas chromatograph and discusses the properties of each of its parts: gas flow and pressure controller sampling system, oven, column switching valves, detectors. The different implementations, their advantages and drawbacks are discussed and compared. In addition, three chapters present packed column technology, open tubular column technology and some sophisticated new phase systems, respectively. The new phase systems described use adsorbents, modified by coating or grafting organic phase, and carrier gases containing vapors which are sorbed by the stationary phase and modify it, such as steam. The third part discusses the applications in qualitative and quantitative analysis. Calibration, peak integration, sources of errors arising from the various parts of the instrument as well as from the measurement process itself are carefully described in four detailed chapters. Methods to carry out accurate and precise analysis are presented. A last chapter is devoted to process control analysis and gives a number of detailed examples of applications. A lexicon explaining the most important chromatographic terms and a detailed index complete the book.This is a book which no chemical analyst should be without. It should be on the library shelf of all universities, instrument companies and any laboratory and plant where gas chromatography is used.
Download or read book Gas Chromatography written by Colin Poole and published by Elsevier. This book was released on 2021-04-20 with total page 938 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas Chromatography, Second Edition, offers a single source of authoritative information on all aspects relating to the practice of gas chromatography. A focus on short, topic-focused chapters facilitates the identification of information that will be of immediate interest for familiar or emerging uses of gas chromatography. The book gives those working in both academia and industry the opportunity to learn, refresh and deepen their understanding of fundamental and instrumental aspects of gas chromatography and tools for the interpretation and management of chromatographic data. Users will find a consolidated guide to the selection of separation conditions and the use of auxiliary techniques. This new edition restores the contemporary character of the book with respect to those involved in advancing the technology, analyzing the data produced, or applying the technique to new application areas. New topics covered include hyphenated spectroscopic detectors, micromachined instrument platforms, derivatization and related microchemical techniques, petrochemical applications, volatile compounds in the atmosphere, and more. - Includes chapters written by recognized authoritative and visionary experts in the field, thus providing an overview and focused treatments on a single topic - Provides comprehensive coverage of modern gas chromatography, from theory, to methods and selected applications - Places modern developments in research literature into a general context not always apparent to inexperienced users of the techniques
Download or read book Analytical Instrumentation Handbook written by Jack Cazes and published by CRC Press. This book was released on 2004-11-30 with total page 1066 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compiled by the editor of Dekker's distinguished Chromatographic Science series, this reader-friendly reference is as a unique and stand-alone guide for anyone requiring clear instruction on the most frequently utilized analytical instrumentation techniques. More than just a catalog of commercially available instruments, the chapters are wri
Download or read book Ewing s Analytical Instrumentation Handbook Fourth Edition written by Nelu Grinberg and published by CRC Press. This book was released on 2019-02-21 with total page 1523 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is a guide for workers in analytical chemistry who need a starting place for information about a specific instrumental technique. It gives a basic introduction to the techniques and provides leading references on the theory and methodology for an instrumental technique. This edition thoroughly expands and updates the chapters to include concepts, applications, and key references from recent literature. It also contains a new chapter on process analytical technology.
