Download or read book SAE Technical Paper Series written by and published by . This book was released on 1999 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Homogeneous Charge Compression Ignition HCCI Engines written by Fuquan Zhao and published by SAE International. This book was released on 2003-01-01 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: The homogeneous charge, compression-ignition (HCCI) combustion process has the potential to significantly reduce NOx and particulate emissions, while achieving high thermal efficiency and the capability of operating with a wide variety of fuels. This makes the HCCI engine an attractive technology that can ostensibly provide diesel-like fuel efficiency and very low emissions, which may allow emissions compliance to occur without relying on lean aftertreatment systems. A profound increase in the level of research and development of this technology has occurred in the last decade. This book gathers contributions from experts in both industry and academia, providing a basic introduction to the state-of-the-art of HCCI technology, a critical review of current HCCI research and development efforts, and perspective for the future. Chapters cover: Gasoline-Fueled HCCI Engines; Diesel-Fueled HCCI Engines; Alternative Fuels and Fuel Additives for HCCI Engines; HCCI Control and Operating Range Extension; Kinetics of HCCI Combustion; HCCI Engine Modeling Approaches.In addition to the extensive overview of terminology, physical processes, and future needs, each chapter also features select SAE papers (a total of 41 are included in the book), as well as a comprehensive list of references related to the subjects. Homogeneous Charge Compression Ignition (HCCI) Engines: Key Research and Development Issues provides a valuable base of information for those interested in learning about this rapidly-progressing technology which has the potential to enhance fuel economy and reduce emissions.
Download or read book Chemical Biological and Environmental Engineering Proceedings of the International Conference on Cbee 2009 written by Li Kai and published by World Scientific. This book was released on 2010 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: Held in Singapore from 9 to 11 October 2009, the 2009 International Conference on Chemical, Biological and Environmental Engineering (CBEE 2009) aims to provide a platform for researchers, engineers, academicians as well as industrial professionals from all over the world to present their research and development activities in chemical, biological and environmental engineering. Conference delegates will also have the opportunity to exchange new ideas and application experiences, establish business or research relations and find global partners for future collaboration. Sample Chapter(s). Chapter 1: The Future of Biopharmaceutics'' Production (92 KB). Contents: Study on Pyrolysis Characteristics of Electronic Waste (J Sun et al.); Application of Noise Mapping on Environmental Management (K-T Tsai et al.); Characteristics and Transport Properties of Two Modified Zero Valent Iron (Y-H Lin et al.); Synthesis of Visible Light Active N-Doped Titania Photocatalyst (C Kusumawardani et al.); CFD-PBM Modeling of Vertical Bubbly Flows (M R Rahimi & H Karimi); Hydrotalcite-Like Synthesis Using Magnesium from Brine Water (E Heraldy et al.); Cement/Activated-Carbon Solidification/Stabilization Treatment of Nitrobenzene (Z Su et al.); Investigation of Fish Species Biodiversity in Haraz River (I Piri et al.); Risk Assessment of Fluoride in Indian Context (V Chaudhary & M Kumar); Light Transmission In Fluidized Bed (E Shahbazali et al.); Drying of Mushroom Using a Solar Tunnel Dryer (M A Basunia et al.); and other papers. Readership: Researchers, engineers, academicians and industrial professionals in related fields of chemical, biological and environmental engineering.
Download or read book Green Energy and Technology written by Hatim Machrafi and published by Bentham Science Publishers. This book was released on 2012 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Energy is indispensable in present society. All depend on a constant and reliable source of energy, whether it be for transport, industrial or home applications. The use of such energy sources can present some inconveniences, such as source depletion, pol"
Download or read book Energy Research Abstracts written by and published by . This book was released on 1994-04 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Homogeneous Charge Compression Ignition Engines 2007 written by and published by . This book was released on 2007 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Combustion Engineering written by Kenneth Bryden and published by CRC Press. This book was released on 2022-05-26 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion Engineering, Third Edition introduces the analysis, design, and building of combustion energy systems. It discusses current global energy, climate, and air pollution challenges and considers the increasing importance of renewable energy sources, such as biomass fuels. Mathematical methods are presented, along with qualitative descriptions of their use, which are supported by numerous tables with practical data and formulae, worked examples, chapter-end problems, and updated references. The new edition features new and updated sections on solid biofuels, spark-ignition, compression-ignition, soot and black carbon formation, and current energy policies. Features include: Builds a strong foundation for design and engineering of combustion systems. Provides fully updated coverage of alternative and renewable fuel topics throughout the text. Features new and updated sections on solid biofuels, spark-ignition, compression-ignition, soot and black carbon formation, and current energy policies. Includes updated data and formulae, worked examples, and additional chapter-end problems. Includes a Solutions Manual and figures slides for adopting instructors. This text is intended for undergraduate and first-year graduate mechanical engineering students taking introductory courses in combustion. Practicing heating engineers, utility engineers, and engineers consulting in energy and environmental areas will find this book a useful reference.
Download or read book Assessment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2011-06-03 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various combinations of commercially available technologies could greatly reduce fuel consumption in passenger cars, sport-utility vehicles, minivans, and other light-duty vehicles without compromising vehicle performance or safety. Assessment of Technologies for Improving Light Duty Vehicle Fuel Economy estimates the potential fuel savings and costs to consumers of available technology combinations for three types of engines: spark-ignition gasoline, compression-ignition diesel, and hybrid. According to its estimates, adopting the full combination of improved technologies in medium and large cars and pickup trucks with spark-ignition engines could reduce fuel consumption by 29 percent at an additional cost of $2,200 to the consumer. Replacing spark-ignition engines with diesel engines and components would yield fuel savings of about 37 percent at an added cost of approximately $5,900 per vehicle, and replacing spark-ignition engines with hybrid engines and components would reduce fuel consumption by 43 percent at an increase of $6,000 per vehicle. The book focuses on fuel consumption-the amount of fuel consumed in a given driving distance-because energy savings are directly related to the amount of fuel used. In contrast, fuel economy measures how far a vehicle will travel with a gallon of fuel. Because fuel consumption data indicate money saved on fuel purchases and reductions in carbon dioxide emissions, the book finds that vehicle stickers should provide consumers with fuel consumption data in addition to fuel economy information.
Download or read book HCCI and CAI Engines for the Automotive Industry written by Hua Zhao and published by CRC Press. This book was released on 2007-09-10 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Homogeneous charge compression ignition (HCCI)/controlled auto-ignition (CAI) has emerged as one of the most promising engine technologies with the potential to combine fuel efficiency and improved emissions performance, offering reduced nitrous oxides and particulate matter alongside efficiency comparable with modern diesel engines. Despite the considerable advantages, its operational range is rather limited and controlling the combustion (timing of ignition and rate of energy release) is still an area of on-going research. Commercial applications are, however, close to reality. HCCI a.
Download or read book Advanced Developments in Ultra Clean Gasoline Powered Vehicles written by Fuquan Zhao and published by SAE International. This book was released on 2004-03-08 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last several years, significant efforts have been directed toward the development of ultra-clean, gasoline-powered vehicles in the automotive industry. With the coming of increasingly stringent emissions legislation, this development is more critical now than ever before. This has lead to an increase in the technical information available. Advanced Developments in Ultra-Clean Gasoline-Powered Vehicles provides the reader with technical information including a description of fundamental processes, insight on technical issues, key trends, and future R&D directions.
Download or read book Motor Gasolines written by and published by . This book was released on 1975 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Alcohol as an Alternative Fuel for Internal Combustion Engines written by Pravesh Chandra Shukla and published by Springer Nature. This book was released on 2021-05-15 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: div="" This book covers different aspects related to utilization of alcohol fuels in internal combustion (IC) engines with a focus on combustion, performance and emission investigations. The focal point of this book is to present engine combustion, performance and emission characteristics of IC engines fueled by alcohol blended fuels such as methanol, ethanol and butanol. The contents also highlight the importance of alcohol fuel for reducing emission levels. Possibility of alcohol fuels for marine applications has also been discussed. This book is a useful guide for researchers, academics and scientists. ^
Download or read book Mathematical Modelling of Gas Phase Complex Reaction Systems Pyrolysis and Combustion written by and published by Elsevier. This book was released on 2019-06-07 with total page 1034 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical Modelling of Gas-Phase Complex Reaction Systems: Pyrolysis and Combustion, Volume 45, gives an overview of the different steps involved in the development and application of detailed kinetic mechanisms, mainly relating to pyrolysis and combustion processes. The book is divided into two parts that cover the chemistry and kinetic models and then the numerical and statistical methods. It offers a comprehensive coverage of the theory and tools needed, along with the steps necessary for practical and industrial applications.
Download or read book Turbulent Combustion written by Norbert Peters and published by Cambridge University Press. This book was released on 2000-08-15 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: The combustion of fossil fuels remains a key technology for the foreseeable future. It is therefore important that we understand the mechanisms of combustion and, in particular, the role of turbulence within this process. Combustion always takes place within a turbulent flow field for two reasons: turbulence increases the mixing process and enhances combustion, but at the same time combustion releases heat which generates flow instability through buoyancy, thus enhancing the transition to turbulence. The four chapters of this book present a thorough introduction to the field of turbulent combustion. After an overview of modeling approaches, the three remaining chapters consider the three distinct cases of premixed, non-premixed, and partially premixed combustion, respectively. This book will be of value to researchers and students of engineering and applied mathematics by demonstrating the current theories of turbulent combustion within a unified presentation of the field.
Download or read book Review of the 21st Century Truck Partnership written by National Research Council and published by National Academies Press. This book was released on 2008-10-19 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 21st Century Truck Partnership (21CTP), a cooperative research and development partnership formed by four federal agencies with 15 industrial partners, was launched in the year 2000 with high hopes that it would dramatically advance the technologies used in trucks and buses, yielding a cleaner, safer, more efficient generation of vehicles. Review of the 21st Century Truck Partnership critically examines and comments on the overall adequacy and balance of the 21CTP. The book reviews how well the program has accomplished its goals, evaluates progress in the program, and makes recommendations to improve the likelihood of the Partnership meeting its goals. Key recommendations of the book include that the 21CTP should be continued, but the future program should be revised and better balanced. A clearer goal setting strategy should be developed, and the goals should be clearly stated in measurable engineering terms and reviewed periodically so as to be based on the available funds.
Download or read book Automotive Fuels Reference Book written by Paul Richards and published by SAE International. This book was released on 2014-03-05 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first two editions of this title, published by SAE International in 1990 and 1995, have been best-selling definitive references for those needing technical information about automotive fuels. This long-awaited new edition has been thoroughly revised and updated, yet retains the original fundamental fuels information that readers find so useful. This book is written for those with an interest in or a need to understand automotive fuels. Because automotive fuels can no longer be developed in isolation from the engines that will convert the fuel into the power necessary to drive our automobiles, knowledge of automotive fuels will also be essential to those working with automotive engines. Small quantities of fuel additives increasingly play an important role in bridging the gap that often exists between fuel that can easily be produced and fuel that is needed by the ever-more sophisticated automotive engine. This book pulls together in a single, extensively referenced volume, the three different but related topics of automotive fuels, fuel additives, and engines, and shows how all three areas work together. It includes a brief history of automotive fuels development, followed by chapters on automotive fuels manufacture from crude oil and other fossil sources. One chapter is dedicated to the manufacture of automotive fuels and fuel blending components from renewable sources. The safe handling, transport, and storage of fuels, from all sources, are covered. New combustion systems to achieve reduced emissions and increased efficiency are discussed, and the way in which the fuels’ physical and chemical characteristics affect these combustion processes and the emissions produced are included. There is also discussion on engine fuel system development and how these different systems affect the corresponding fuel requirements. Because the book is for a global market, fuel system technologies that only exist in the legacy fleet in some markets are included. The way in which fuel requirements are developed and specified is discussed. This covers test methods from simple laboratory bench tests, through engine testing, and long-term test procedures.
