Download or read book Autodesk Inventor 2020 Introduction to Solid Modeling Mixed Units Part 2 written by ASCENT - Center for Technical Knowledge and published by Ascent, Center for Technical Knowledge. This book was released on 2019-03-26 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Note: This book is a continuation of Autodesk(R) Inventor(R) 2020: Introduction to Solid Modeling - Part 1 The Autodesk(R) Inventor(R) 2020: Introduction to Solid Modeling guide provides you with an understanding of the parametric design philosophy through a hands-on, practice-intensive curriculum. You will learn the key skills and knowledge required to design models using Autodesk Inventor, starting with conceptual sketching, through to solid modeling, assembly design, and drawing production. Topics Covered Understanding the Autodesk Inventor software interface Creating, constraining, and dimensioning 2D sketches Creating and editing the solid base 3D feature from a sketch Creating and editing secondary solid features that are sketched and placed Creating equations and working with parameters Manipulating the display of the model Resolving feature failures Duplicating geometry in the model Placing and constraining/connecting parts in assemblies Manipulating the display of components in an assembly Obtaining model measurements and property information Creating Presentation files (Exploded views) Modifying and analyzing the components in an assembly Simulating motion in an assembly Creating parts and features in assemblies Creating and editing an assembly Bill of Materials Working with projects Creating and annotating drawings and views Customizing the Autodesk Inventor environment Prerequisites Access to the 2020 version of the software. The practices and files included with this guide might not be compatible with prior versions. As an introductory guide, Autodesk(R) Inventor(R) 2020: Introduction to Solid Modeling does not assume prior knowledge of any 3D modeling or CAD software. You need to be experienced with the Windows operating system, and having a background in drafting of 3D parts is recommended.

Download or read book Autodesk Inventor 2020 Introduction to Solid Modeling Mixed Units Part 1 written by ASCENT - Center for Technical Knowledge and published by Ascent, Center for Technical Knowledge. This book was released on 2019-03-26 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Note: This book is continued in Autodesk(R) Inventor(R) 2020: Introduction to Solid Modeling - Part 2. The Autodesk(R) Inventor(R) 2020: Introduction to Solid Modeling guide provides you with an understanding of the parametric design philosophy through a hands-on, practice-intensive curriculum. You will learn the key skills and knowledge required to design models using Autodesk Inventor, starting with conceptual sketching, through to solid modeling, assembly design, and drawing production. Topics Covered Understanding the Autodesk Inventor software interface Creating, constraining, and dimensioning 2D sketches Creating and editing the solid base 3D feature from a sketch Creating and editing secondary solid features that are sketched and placed Creating equations and working with parameters Manipulating the display of the model Resolving feature failures Duplicating geometry in the model Placing and constraining/connecting parts in assemblies Manipulating the display of components in an assembly Obtaining model measurements and property information Creating Presentation files (Exploded views) Modifying and analyzing the components in an assembly Simulating motion in an assembly Creating parts and features in assemblies Creating and editing an assembly Bill of Materials Working with projects Creating and annotating drawings and views Customizing the Autodesk Inventor environment Prerequisites Access to the 2020 version of the software. The practices and files included with this guide might not be compatible with prior versions. As an introductory guide, Autodesk(R) Inventor(R) 2020: Introduction to Solid Modeling does not assume prior knowledge of any 3D modeling or CAD software. You need to be experienced with the Windows operating system, and having a background in drafting of 3D parts is recommended.

Download or read book Autodesk Inventor 2023 Introduction to Solid Modeling Part 2 Mixed Units written by ASCENT - Center for Technical Knowledge and published by . This book was released on 2022-03-29 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Autodesk Inventor 2024 Introduction to Solid Modeling Part 2 Mixed Units written by ASCENT - Center for Technical Knowledge and published by ASCENT - Center for Technical Knowledge. This book was released on 2023-03-30 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Autodesk Inventor 2021 Introduction to Solid Modeling Part 2 Mixed Units written by ASCENT - Center for Technical Knowledge and published by . This book was released on 2020-03-30 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Autodesk Inventor 2020 Introduction for Experienced 3D CAD Users Mixed Units Part 2 written by ASCENT - Center for Technical Knowledge and published by . This book was released on 2019-07-11 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Note: This book is a continuation of Autodesk(R) Inventor(R) 2020: Introduction for Experienced 3D CAD Users - Part 1. Both books are required to complete this guide. The Autodesk(R) Inventor(R) 2020: Introduction for Experienced 3D CAD Users learning guide is intended to provide accelerated introductory training in the Autodesk(R) Inventor(R) software. This learning guide is designed for users that have 3D modeling design experience with other 3D CAD software packages (e.g., CATIA(TM), Pro/ENGINEER(R), Creo Parametric(TM), NX(TM), SolidWorks(R), etc.). By leveraging the experience users gain in working with other 3D modeling software packages, this hands-on, practice-intensive guide is developed so that new users in the Autodesk Inventor software can benefit from a shorter, introductory-level, learning guide. You are taught how to find and use the modeling tools associated with familiar modeling strategies that are used in other 3D CAD software. You will acquire the knowledge required to complete the process of creating models from conceptual sketching, through to solid modeling, assembly design, and drawing production. Topics Covered The Autodesk Inventor software interface Obtaining model information Creating sketch and pick and place features Work Features Creating equations and working with parameters Model geometry and model display manipulation Feature duplication techniques Placing and constraining parts in assemblies Assembly component display Presentation files (Exploded views and Animations) Assembly tools Creating parts and features in assemblies Creating and editing assembly Bill of Materials Working with projects Creating and annotating drawings and views Prerequisites Access to the 2020.0 version of the software, to ensure compatibility with this guide. Future software updates that are released by Autodesk may include changes that are not reflected in this guide. The practices and files included with this guide are not compatible with prior versions (i.e., 2019). Prior knowledge of 3D modeling and 3D CAD software. Users with AutoCAD(R) or AutoCAD(R) Mechanical experience are recommended to use the Autodesk Inventor 2020: Introduction to Solid Modeling guide.

Download or read book Autodesk Inventor CAM 2022 Milling Fundamentals Mixed Units written by ASCENT - Center for Technical Knowledge and published by Ascent, Center for Technical Knowledge. This book was released on 2021-09-24 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Autodesk(R) Inventor(R) CAM 2022: Milling Fundamentals guide focuses on instructing new users on how to use the Inventor CAM add-on to create milling toolpaths. The guide begins with an introduction to the overall Inventor interface and explains how to manipulate your 3D model to change its orientation and view display. Through additional hands-on, practice-intensive curriculum, you will learn the key skills and knowledge required to take the 3D model, set it up in the CAM environment, and assign the 2D and 3D milling toolpaths needed to generate the CNC code required by milling machines. Topics Covered Navigate the Inventor software interface to locate and execute commands. Use the model orientation commands to pan, zoom, rotate, and look at a model. Assign visual styles to your models. Locate, modify, and create tools in the Tool Library. Set up machining operations using Inventor CAM. Create 2D Milling, 3D Milling and Drilling toolpaths using the Inventor CAM interface. Use the Simulation option to visualize toolpaths. Import a tool library. Create a toolpath template. Post process an Inventor CAM setup to output the CNC code required to machine a model. Prerequisites Access to the 2022 version of the software, to ensure compatibility with this guide. Future software updates that are released by Autodesk may include changes that are not reflected in this guide. The practices and files included with this guide are not compatible with prior versions (e.g., 2021). As an introductory guide, Autodesk(R) Inventor(R) CAM 2022: Milling Fundamentals does not assume prior knowledge of Autodesk Inventor CAM. However, this guide will not provide instructional content on how to create 3D models using the Inventor modeling tools. Its focus is solely on generating 2D and 3D milling and drilling toolpaths once models are created. The Autodesk(R) Inventor(R) 2022: Introduction to Solid Modeling guide should be used to learn to create 3D models. It is recommended that users have prior experience with the Windows operating system, knowledge of 3D model creation/modification, and an understanding of the CNC milling process.

Download or read book Autodesk Inventor 2020 Advanced Part Modeling Mixed Units written by ASCENT - Center for Technical Knowledge and published by . This book was released on 2019-07-11 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: Autodesk(R) Inventor(R) 2020: Advanced Part Modeling is the second in a series of guides on the Autodesk(R) Inventor(R) software that is published by ASCENT. The goal of this guide is to build on the skills acquired in the Autodesk Inventor: Introduction to Solid Modeling learning guide by taking users to a higher level of productivity when designing part models using the Autodesk Inventor software. In this guide, the user considers various approaches to part design. Specific advanced part modeling techniques covered include: multi-body design, advanced lofts, advanced sweeps, coils, generative shape design, surface modeling, and Freeform modeling. Material aimed at increasing efficiency includes: iFeatures for frequently used design elements, iParts for similar designs, and how to work with imported data. The guide also covers some miscellaneous drawing tools, such as: custom sketches symbols, working with title blocks and borders, and documenting iParts. Topics Covered Advanced model appearance options 2D and 3D sketching techniques Multi-body part modeling Advanced geometry creation tools (work features, area lofts, sweeps, and coils) Analysis tools Generative shape design using Shape Generator Creating and editing basic surfaces, importing surfaces, and surface repair tools iFeatures and iParts Importing data from other CAD systems and making edits Working with AutoCAD DWG files Freeform modeling Emboss and Decal features Advanced Drawing tools (iPart tables, surfaces in drawing views, and custom sketched symbols) Adding notes with the Engineer's Notebook Prerequisites Access to the 2020.0 version of the software (or later). The practices and files included with this guide are not compatible with prior versions. Future software updates that are released by Autodesk may include changes that will not be reflected in this guide. The material assumes a mastery of Autodesk Inventor basics, as taught in Autodesk(R) Inventor(R) Introduction to Solid Modeling. Users should know how to create and edit parts, use work features, create and annotate drawing views, etc. The use of Microsoft Excel is required for this guide.

Download or read book Autodesk Inventor 2020 Introduction for Experienced 3D CAD Users Mixed Units Part 1 written by ASCENT - Center for Technical Knowledge and published by . This book was released on 2019-07-11 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Note: This book is continued in Autodesk(R) Inventor(R) 2020: Introduction for Experienced 3D CAD Users - Part 2. Both books are required to complete this guide. The Autodesk(R) Inventor(R) 2020: Introduction for Experienced 3D CAD Users learning guide is intended to provide accelerated introductory training in the Autodesk(R) Inventor(R) software. This learning guide is designed for users that have 3D modeling design experience with other 3D CAD software packages (e.g., CATIA(TM), Pro/ENGINEER(R), Creo Parametric(TM), NX(TM), SolidWorks(R), etc.). By leveraging the experience users gain in working with other 3D modeling software packages, this hands-on, practice-intensive guide is developed so that new users in the Autodesk Inventor software can benefit from a shorter, introductory-level, learning guide. You are taught how to find and use the modeling tools associated with familiar modeling strategies that are used in other 3D CAD software. You will acquire the knowledge required to complete the process of creating models from conceptual sketching, through to solid modeling, assembly design, and drawing production. Topics Covered The Autodesk Inventor software interface Obtaining model information Creating sketch and pick and place features Work Features Creating equations and working with parameters Model geometry and model display manipulation Feature duplication techniques Placing and constraining parts in assemblies Assembly component display Presentation files (Exploded views and Animations) Assembly tools Creating parts and features in assemblies Creating and editing assembly Bill of Materials Working with projects Creating and annotating drawings and views Prerequisites Access to the 2020.0 version of the software, to ensure compatibility with this guide. Future software updates that are released by Autodesk may include changes that are not reflected in this guide. The practices and files included with this guide are not compatible with prior versions (i.e., 2019). Prior knowledge of 3D modeling and 3D CAD software. Users with AutoCAD(R) or AutoCAD(R) Mechanical experience are recommended to use the Autodesk Inventor 2020: Introduction to Solid Modeling guide.

Download or read book Autodesk Inventor 2020 written by ASCENT - Center for Technical Knowledge and published by . This book was released on 2020-02-05 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Autodesk(R) Inventor(R) 2020: Surface and Freeform Modeling guide teaches you how to incorporate surfacing and freeform modeling techniques into your design environment. You begin with instruction on how to create the splines and 3D sketches commonly used in surface creation. Chapters on surface creation focus on using these sketches or existing geometry to create surfaces for use in your solid models. Freeform modeling is also covered, which enables you to create complex shapes without needing the constraints required in a parametric workflow. To complete the guide, you will learn how to use the Autodesk Inventor surface analysis tools to evaluate the continuity between surfaces and the curvature on a surface, determine if the applied draft is within a specified range, and conduct section analysis to evaluate wall thickness values. The topics covered in this guide are also covered in ASCENT's Autodesk(R) Inventor(R) 2020: Advanced Part Modeling guide, which includes a broader range of advanced learning topics. Topics Covered Create spline and 3D sketched entities. Create planar and three-dimensional surfaces. Combine individual surface features into a single quilted surface. Add or remove material in a model by referencing a surface. Create solid geometry using surface geometry. Remove portions of a surface using a reference surface or work plane. Manipulate the extent of a surface by extending or stretching it. Create a new solid face by replacing an existing solid face with surface geometry. Remove existing surfaces or solid faces from a model. Copy surfaces from one model into another. Create freeform geometry base shapes, faces, and converted geometry. Edit freeform base geometry by manipulating existing geometry or adding new elements to the base shape. Use the surface analysis tools to evaluate continuity between surfaces, check draft values, analyze curvature on a surface, and review sectioned areas of the model. Prerequisites Access to the 2020.0 version of the software, to ensure compatibility with this guide. Future software updates that are released by Autodesk may include changes that are not reflected in this guide. The practices and files included with this guide might not be compatible with prior versions (i.e., 2019). The material covered in this guide assumes a mastery of Autodesk Inventor basics as taught in the Autodesk Inventor: Introduction to Solid Modeling guide.

Download or read book Autodesk Inventor 2019 written by ASCENT - Center for Technical Knowledge and published by . This book was released on 2018-03-25 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Autodesk(R) Inventor(R) 2019: Introduction to Solid Modeling learning guide provides you with an understanding of the parametric design philosophy through a hands-on, practice-intensive curriculum. You will learn the key skills and knowledge needed to design models using Autodesk Inventor, starting with conceptual sketching, through to solid modeling, assembly design, and drawing production. Topics Covered Understanding the Autodesk(R) Inventor(R) software interface Creating, constraining, and dimensioning 2D sketches Creating and editing the solid base 3D feature from a sketch Creating and editing secondary solid features that are sketched and placed Creating equations and working with parameters Manipulating the display of the model Resolving feature failures Duplicating geometry in the model Placing and constraining/connecting parts in assemblies Manipulating the display of components in an assembly Duplicating components in an assembly Obtaining model measurements and property information Creating Presentation files (Exploded views and Animations) Modifying and analyzing the components in an assembly Simulating motion in an assembly Creating parts and features in assemblies Creating and editing an assembly Bill of Materials Working with projects Creating and annotating drawings and views Customizing the Autodesk Inventor environment Prerequisites Access to the 2019 version of the software. The practices and files included with this guide might not be compatible with prior versions. As an introductory learning guide, Autodesk Inventor 2019: Introduction to Solid Modeling does not assume prior knowledge of any 3D modeling or CAD software. Students do need to be experienced with the Windows operating system and a background in drafting of 3D parts is recommended.

Download or read book Exploring DraftSight written by Randy Shih and published by SDC Publications. This book was released on 2012-07-27 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: DraftSight is a free, two-dimensional Computer Aided Design (CAD) program that can create, edit and view DWG files. DraftSight is a fully featured, free alternative to other, more expensive 2D CAD software packages. The primary goal of Exploring DraftSight is to introduce the aspects of Engineering Graphics with the use of modern Computer Aided Design package – DraftSight. This text is intended to be used as a training guide for students and professionals. The chapters in this text proceed in a pedagogical fashion to guide you from constructing basic shapes to making complete sets of engineering drawings. This text takes a hands-on, exercise-intensive approach to all the important concepts of Engineering Graphics, as well as in-depth discussions of CAD techniques. This textbook contains a series of twelve chapters, with detailed step-by-step tutorial style lessons, designed to introduce beginning CAD users to the graphic language used in all branches of technical industry. The CAD techniques and concepts discussed in this text are also designed to serve as the foundation to the more advanced parametric feature-based CAD packages such as SolidWorks and CATIA. This book does not attempt to cover all of DraftSight’s features, only to provide an introduction to the software. It is intended to help you establish a good basis for exploring and growing in the exciting field of Computer Aided Engineering.

Download or read book Autodesk Inventor 2024 Introduction to Solid Modeling Part 1 Mixed Units written by ASCENT - Center for Technical Knowledge and published by . This book was released on 2023-03-30 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Technical Drawing 101 with AutoCAD 2016 written by Antonio Ramirez and published by SDC Publications. This book was released on 2015-05 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technical Drawing 101 covers topics ranging from the most basic, such as making freehand, multiview sketches of machine parts, to the advanced—creating an AutoCAD dimension style containing the style settings defined by the ASME Y14.5-2009 Dimensioning and Tolerancing standard. But unlike the massive technical drawing reference texts on the market, Technical Drawing 101 aims to present just the right mix of information and projects that can be reasonably covered by faculty, and assimilated by students, in one semester. Both mechanical and architectural projects are introduced to capture the interest of more students and to offer a broader appeal. The authors have also created extensive video training (120 videos, 15 hours total) that is included with every copy of the book. In these videos the authors start off by getting students comfortable with the user interface and demonstrating how to use many of AutoCAD's commands and features. The videos progress to more advanced topics where the authors walk students through completing several of the projects in the book. The CAD portion of the text incorporates drafting theory whenever possible and covers the basics of drawing setup (units, limits, and layers), the tools of the Draw, Modify, and Dimension toolbars, and the fundamentals of 3D modeling. By focusing on the fundamental building blocks of CAD, Technical Drawing 101 provides a solid foundation for students going on to learn advanced CAD concepts and techniques (paper space, viewports, xrefs, annotative scaling, etc.) in intermediate CAD courses. In recognition of the diverse career interests of our students, Technical Drawing 101 includes projects in which students create working drawings for a mechanical assembly as well as for an architectural project. We include architectural drawing because our experience has shown that many (if not most) first-semester drafting students are interested in careers in the architectural design field, and that a traditional technical drawing text, which focuses solely on mechanical drawing projects, holds little interest for these students. The multidisciplinary approach of this text and its supporting materials are intended to broaden the appeal of the curriculum and increase student interest and, it is hoped, future enrollments.

Download or read book Autodesk Inventor 2021 Introduction to Solid Modeling Part 1 Mixed Units written by ASCENT - Center for Technical Knowledge and published by . This book was released on 2020-03-30 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Technical Drawing 101 with AutoCAD 2022 written by Ashleigh Congdon-Fuller and published by SDC Publications. This book was released on 2021-07 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: • Blends technical drawing and an introduction to AutoCAD 2022 • Covers both mechanical and architectural projects • Twenty six hours of video instruction is included with each book • Drafting theory is incorporated throughout the text • Designed to be used in a single semester, instructor led course • Each chapter contains key terms, unit summaries, review questions and drawing projects Technical Drawing 101 covers topics ranging from the most basic, such as making freehand, multiview sketches of machine parts, to the advanced—creating an AutoCAD dimension style containing the style settings defined by the ASME Y14.5-2009 Dimensioning and Tolerancing standard. But unlike the massive technical drawing reference texts on the market, Technical Drawing 101 aims to present just the right mix of information and projects that can be reasonably covered by faculty, and assimilated by students, in one semester. Both mechanical and architectural projects are introduced to capture the interest of more students and to offer a broader appeal. The authors have also created extensive video training (176 videos, 26 hours total) that is included with every copy of the book. In these videos the authors start off by getting students comfortable with the user interface and demonstrating how to use many of AutoCAD's commands and features. The videos progress to more advanced topics where the authors walk students through completing several of the projects in the book. The CAD portion of the text incorporates drafting theory whenever possible and covers the basics of drawing setup (units, limits, and layers), the tools of the Draw, Modify, and Dimension toolbars, and the fundamentals of 3D modeling. By focusing on the fundamental building blocks of CAD, Technical Drawing 101 provides a solid foundation for students going on to learn advanced CAD concepts and techniques (paper space, viewports, xrefs, annotative scaling, etc.) in intermediate CAD courses. In recognition of the diverse career interests of our students, Technical Drawing 101 includes projects in which students create working drawings for a mechanical assembly as well as for an architectural project. We include architectural drawing because our experience has shown that many (if not most) first-semester drafting students are interested in careers in the architectural design field, and that a traditional technical drawing text, which focuses solely on mechanical drawing projects, holds little interest for these students. The multidisciplinary approach of this text and its supporting materials are intended to broaden the appeal of the curriculum and increase student interest and, it is hoped, future enrollments.

Download or read book Technical Drawing 101 with AutoCAD 2017 written by Ashleigh Fuller and published by SDC Publications. This book was released on 2016-05 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technical Drawing 101 covers topics ranging from the most basic, such as making freehand, multiview sketches of machine parts, to the advanced—creating an AutoCAD dimension style containing the style settings defined by the ASME Y14.5-2009 Dimensioning and Tolerancing standard. But unlike the massive technical drawing reference texts on the market, Technical Drawing 101 aims to present just the right mix of information and projects that can be reasonably covered by faculty, and assimilated by students, in one semester. Both mechanical and architectural projects are introduced to capture the interest of more students and to offer a broader appeal. The authors have also created extensive video training (120 videos, 15 hours total) that is included with every copy of the book. In these videos the authors start off by getting students comfortable with the user interface and demonstrating how to use many of AutoCAD's commands and features. The videos progress to more advanced topics where the authors walk students through completing several of the projects in the book. The CAD portion of the text incorporates drafting theory whenever possible and covers the basics of drawing setup (units, limits, and layers), the tools of the Draw, Modify, and Dimension toolbars, and the fundamentals of 3D modeling. By focusing on the fundamental building blocks of CAD, Technical Drawing 101 provides a solid foundation for students going on to learn advanced CAD concepts and techniques (paper space, viewports, xrefs, annotative scaling, etc.) in intermediate CAD courses. In recognition of the diverse career interests of our students, Technical Drawing 101 includes projects in which students create working drawings for a mechanical assembly as well as for an architectural project. We include architectural drawing because our experience has shown that many (if not most) first-semester drafting students are interested in careers in the architectural design field, and that a traditional technical drawing text, which focuses solely on mechanical drawing projects, holds little interest for these students. The multidisciplinary approach of this text and its supporting materials are intended to broaden the appeal of the curriculum and increase student interest and, it is hoped, future enrollments.