Download or read book Phase Stability and Phase Transformations written by R. Krishnan and published by . This book was released on 1985 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the International Conference on Phase Stability and Phase Transformations, Bombay, India, 1984
Download or read book Phase Transformations in Steels written by Elena Pereloma and published by Elsevier. This book was released on 2012-05-11 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: The processing-microstructure-property relationships in steels continue to present challenges to researchers because of the complexity of phase transformation reactions and the wide spectrum of microstructures and properties achievable. This major two-volume work summarises the current state of research on phase transformations in steels and its implications for the emergence of new steels with enhanced engineering properties.Volume 1 reviews fundamentals and diffusion-controlled phase transformations. After a historical overview, chapters in part one discuss fundamental principles of thermodynamics, diffusion and kinetics as well as phase boundary interfaces. Chapters in part two go on to consider ferrite formation, proeutectoid ferrite and cementite transformations, pearlite formation and massive austenite-ferrite phase transformations. Part three discusses the mechanisms of bainite transformations, including carbide-containing and carbide-free bainite. The final part of the book considers additional driving forces for transformation including nucleation and growth during austenite-to-ferrite phase transformations, dynamic strain-induced ferrite transformations (DIST) as well as the effects of magnetic fields and heating rates.With its distinguished editors and distinguished international team of contributors, the two volumes of Phase transformations in steels is a standard reference for all those researching the properties of steel and developing new steels in such areas as automotive engineering, oil and gas and energy production. - Discusses the fundamental principles of thermodynamics, diffusion and kinetics - Considers various transformations, including ferrite formation, proeutectoid ferrite and cementite transformations - Considers additional driving forces for transformation including nucleation and growth during austenite-to-ferrite phase transformations
Download or read book Bainite in Steels written by Harshad Kumar Dharamshi Hansraj Bhadeshia and published by Maney Publishing. This book was released on 2001 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this modern classic encompasses the latest research, which sees bainitic alloys at the forefront of a new wave of "designed" steels. Contents include: Nomenclature; Introduction; Bainitic Ferrite; Carbide Precipitation; Tempering of Bainite; Thermodynamics; Kinetics; Upper and Lower Bainite; Stress and Strain Effects; Reverse Transformation from Bainite to Austenite; Acicular Ferrite; Other Morphologies of Bainite; Mechanical Properties; Modern Bainitic Alloys;Other Aspects; The Transformation of Steel.
Download or read book Phase Stability in Metals and Alloys written by Battelle Memorial Institute and published by . This book was released on 1967 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Carburizing written by Geoffrey Parrish and published by ASM International. This book was released on 1999-01-01 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Based on his training in metallurgy and experience in a large British gear manufacturing company, Parrish reviews the microstructural features of metal products that have been carbon case-hardened, and the influence of those features on the more important material properties. He is not concerned with the carbonizing process at all. He primarily addresses students of engineering and ferrous metallurgy, but also stress and design engineers who might want to understand more fully the specifications of the materials they are considering for their designs. He wrote the eight articles to summarize the field's literature of the early 1970s for his own convenience, but at invitation, published them as a series in the Heat Treatment of Metals during 1967-77, and collected them for a first edition of the volume in 1980. Annotation copyrighted by Book News, Inc., Portland, OR.
Download or read book Metallurgy for the Non Metallurgist Second Edition written by Arthur C. Reardon and published by ASM International. This book was released on 2011-01-01 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: The completely revised Second Edition of Metallurgy for the Non-Metallurgist provides a solid understanding of the basic principles and current practices of metallurgy. This major new edition is for anyone who uses, makes, buys or tests metal products. For both beginners and others seeking a basic refresher, the new Second Edition of the popular Metallurgy for the Non-Metallurgist gives an all-new modern view on the basic principles and practices of metallurgy. This new edition is extensively updated with broader coverage of topics, new and improved illustrations, and more explanation of basic concepts. Why are cast irons so suitable for casting? Do some nonferrous alloys respond to heat treatment like steels? Why is corrosion so pernicious? These are questions that can be answered in this updated reference with many new illustrations, examples, and descriptions of basic metallurgy.
Download or read book Encyclopedia of Iron Steel and Their Alloys Online Version written by Rafael Colás and published by CRC Press. This book was released on 2016-01-06 with total page 3918 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first of many important works featured in CRC Press’ Metals and Alloys Encyclopedia Collection, the Encyclopedia of Iron, Steel, and Their Alloys covers all the fundamental, theoretical, and application-related aspects of the metallurgical science, engineering, and technology of iron, steel, and their alloys. This Five-Volume Set addresses topics such as extractive metallurgy, powder metallurgy and processing, physical metallurgy, production engineering, corrosion engineering, thermal processing, metalworking, welding, iron- and steelmaking, heat treating, rolling, casting, hot and cold forming, surface finishing and coating, crystallography, metallography, computational metallurgy, metal-matrix composites, intermetallics, nano- and micro-structured metals and alloys, nano- and micro-alloying effects, special steels, and mining. A valuable reference for materials scientists and engineers, chemists, manufacturers, miners, researchers, and students, this must-have encyclopedia: Provides extensive coverage of properties and recommended practices Includes a wealth of helpful charts, nomograms, and figures Contains cross referencing for quick and easy search Each entry is written by a subject-matter expert and reviewed by an international panel of renowned researchers from academia, government, and industry. Also Available Online This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for researchers, students, and librarians, including: Citation tracking and alerts Active reference linking Saved searches and marked lists HTML and PDF format options Contact Taylor and Francis for more information or to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367; (E-mail) [email protected] International: (Tel) +44 (0) 20 7017 6062; (E-mail) [email protected]
Download or read book Austenitic Stainless Steels written by Wojciech Borek and published by BoD – Books on Demand. This book was released on 2017-12-20 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stainless steel is still one of the fastest growing materials. Today, the austenitic stainless steel with the classic composition of 18% Cr and 8% Ni (grade 304L) is still the most widely used by far in the world. The unique characteristic of stainless steel arises from three main factors. The versatility results from high corrosion resistance, excellent low- and high-temperature properties, high toughness, formability, and weldability. The long life of stainless steels has been proven in service in a wide range of environments, together with low maintenance costs compared to other highly alloyed metallic materials. The retained value of stainless steel results from the high intrinsic value and easy recycling. Stainless steel, especially of austenitic microstructure, plays a crucial role in achieving sustainable development nowadays, so it is also important for further generations.
Download or read book Advanced High Strength Sheet Steels written by Nina Fonstein and published by Springer. This book was released on 2015-11-01 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers all types of advanced high strength steels ranging from dual-phase, TRIP. Complex phase, martensitic, TWIP steels to third generation steels, including promising candidates as carbide free bainitic steels, med Mn and Quenching & Partitioning processed steels. The author presents fundamentals of physical metallurgy of key features of structure and relationship of structure constituents with mechanical properties as well as basics of processing AHSS starting from most important features of intercritical heat treatment, with focus on critical phase transformations and influence of alloying and microalloying. This book intends to summarize the existing knowledge to show how it can be utilized for optimization and adaption of steel composition, processing, and for additional improvement of steel properties that should be recommended to engineering personal of steel designers, producers and end users of AHSS as well as to students of colleges and Universities who deal with materials for auto industry.
Download or read book Modern Physical Metallurgy written by R. E. Smallman and published by Elsevier. This book was released on 2013-10-22 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Physical Metallurgy, Fourth Edition explains the fundamental principles of physical metallurgy and their application, allowing its readers to understand the many important technological phenomena of the field. The book covers topics such as the molecular properties of metals; the different physical methods of metals and alloys; and the structure of alloys. Also covered are topics such as the deformation of metals and alloys; phase transformations; and related processes such as creep, fatigue, fracture, oxidation, and corrosion. The text is recommended for metallurgists, chemists, and engineers who would like to know more about the principles behind metallurgy and its application in different fields.
Download or read book Modern Physical Metallurgy and Materials Engineering written by R. E. Smallman and published by Elsevier. This book was released on 1999-11-22 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: For many years, various editions of Smallman's Modern Physical Metallurgy have served throughout the world as a standard undergraduate textbook on metals and alloys. In 1995, it was rewritten and enlarged to encompass the related subject of materials science and engineering and appeared under the title Metals & Materials: Science, Processes, Applications offering a comprehensive amount of a much wider range of engineering materials. Coverage ranged from pure elements to superalloys, from glasses to engineering ceramics, and from everyday plastics to in situ composites, Amongst other favourable reviews, Professor Bhadeshia of Cambridge University commented: "Given the amount of work that has obviously gone into this book and its extensive comments, it is very attractively priced. It is an excellent book to be recommend strongly for purchase by undergraduates in materials-related subjects, who should benefit greatly by owning a text containing so much knowledge."The book now includes new chapters on materials for sports equipment (golf, tennis, bicycles, skiing, etc.) and biomaterials (replacement joints, heart valves, tissue repair, etc.) - two of the most exciting and rewarding areas in current materials research and development. As in its predecessor, numerous examples are given of the ways in which knowledge of the relation between fine structure and properties has made it possible to optimise the service behaviour of traditional engineering materials and to develop completely new and exciting classes of materials. Special consideration is given to the crucial processing stage that enables materials to be produced as marketable commodities. Whilst attempting to produce a useful and relatively concise survey of key materials and their interrelationships, the authors have tried to make the subject accessible to a wide range of readers, to provide insights into specialised methods of examination and to convey the excitement of the atmosphere in which new materials are conceived and developed.
Download or read book Principles of heat treatment of steels written by Romesh C. Sharma and published by New Age International. This book was released on 2003 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat Treatment Of Steels As An Art To Improve Their Service Performance Has Been Practised Ever Since It Started To Be Used As Tools And Weapons.However, The Scientific Basis Of Heat Treatment Of Steels Became More Apparent Only In The First Half Of This Century And Still Some Gaps Remain In Its Complete Understanding.Earlier Books On Heat Treatment Of Steels Mainly Emphasised The Art And The Empirically Arrived Principles Of Heat Treatment. In The Last Few Decades, Our Understanding Of Phase Transformations And Mechanical Behaviour Of Steels, And Consequently Of Heat Treatment Of Steels, Has Considerably Increased.In This Book On Principles Of Heat Treatment Of Steels The Emphasis Is On The Scientific Principles Behind The Various Heat Treatment Processes Of Steels. Though It Is Expected That The Reader Has Sufficient Background In Phase Transformations And Mechanical Behaviour Of Materials, First Few Chapters Review These Topics With Specific Reference To Steels. Basic Principles Of Various Heat Treatment Processes Of Steels Including Surface Hardening Processes, Are Then Covered In Sufficient Detail To Give A Good Overall Understanding Of These Processes. The Detail Engineering Aspects Are, However, Omitted. These Are Easily Available In Various Handbooks On Heat Treatment. The Book Also Covers Heat Treatment Of Tool Steels And Cast Irons.The Book Has Been Well Written And Can Be Used A Textbook On Heat Treatment For Undergraduate Students. It Is Also A Good Reference Book For Teachers And Researchers In This Area And Engineers In The Industry.
Download or read book Thin Film Structures and Phase Stability Volume 187 written by Bruce M. Clemens and published by . This book was released on 1990 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: The MRS Symposium Proceeding series is an internationally recognised reference suitable for researchers and practitioners.
Download or read book Steels Processing Structure and Performance Second Edition written by George Krauss and published by ASM International. This book was released on 2015-03-01 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: George Krauss, University Emeritus Professor, Colorado School of Mines and author of the best-selling ASM book Steels: Processing, Structure, and Performance, discusses some of the important additions and updates to the new second edition.
Download or read book Martensitic Transformation written by Zenji Nishiyama and published by Elsevier. This book was released on 2012-12-02 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Martensitic Transformation examines martensitic transformation based on the known crystallographical data. Topics covered range from the crystallography of martensite to the transformation temperature and rate of martensite formation. The conditions for martensite formation and stabilization of austenite are also discussed, along with the crystallographic theory of martensitic transformations. Comprised of six chapters, this book begins with an introduction to martensite and martensitic transformation, with emphasis on the basic properties of martensite in steels such as carbon steels. The next two chapters deal with the crystallography of martensite and discuss the martensitic transformation behavior of the second-order transition; lattice imperfections in martensite; and close-packed layer structures of martensites produced from ? phase in noble-metal-base alloys. Thermodynamical problems and kinetics are also analysed, together with conditions for the nucleation of martensite and problems concerning stabilization of austenite. The last chapter discusses the theory of the mechanism underlying martensitic transformation. This monograph will be of interest to metallurgists and materials scientists.
Download or read book Advanced High Strength Steels written by Mahmoud Y. Demeri and published by ASM International. This book was released on 2013-08-01 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines the types, microstructures and attributes of AHSSAlso reviews the current and future applications, the benefits, trends and environmental and sustainability issues.
