Download or read book Atomic Oxygen Effects on Spacecraft Materials written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-20 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low Earth orbital (LEO) atomic oxygen cannot only erode the external surfaces of polymers on spacecraft, but can cause degradation of surfaces internal to components on the spacecraft where openings to the space environment exist. Although atomic oxygen attack on internal or interior surfaces may not have direct exposure to the LEO atomic oxygen flux, scattered impingement can have can have serious degradation effects where sensitive interior surfaces are present. The effects of atomic oxygen erosion of polymers interior to an aperture on a spacecraft is simulated using Monte Carlo computational techniques. A 2-dimensional model is used to provide quantitative indications of the attenuation of atomic oxygen flux as a function of distance into a parallel walled cavity. The degree of erosion relative is compared between the various interior locations and the external surface of an LEO spacecraft. Banks, Bruce A. and Miller, Sharon K. R. and deGroh, Kim K. and Demko, Rikako Glenn Research Center NASA/TM-2003-212484, NAS 1.15:212484, E-14026
Download or read book Atomic Oxygen Effects on Spacecraft Materials written by and published by . This book was released on 2003 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Material Selection Guidelines to Limit Atomic Oxygen Effects on Spacecraft Surfaces written by D. Dooling and published by . This book was released on 1999 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Protection of Materials and Structures From the Space Environment written by Jacob Kleiman and published by Springer Science & Business Media. This book was released on 2012-09-22 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goals of the 10th International Space Conference on “Protection of Materials and Structures from Space Environment” ICPMSE-10J, since its inception in 1992, have been to facilitate exchanges between members of the various engineering and science disciplines involved in the development of space materials, including aspects of LEO, GEO and Deep Space environments, ground-based qualification, and in-flight experiments and lessons learned from operational vehicles that are closely interrelated to disciplines of the atmospheric sciences, solar-terrestrial interactions and space life sciences. The knowledge of environmental conditions on and around the Moon, Mars, Venus and the low Earth orbit as well as other possible candidates for landing such as asteroids have become an important issue, and protecting both hardware and human life from the effects of space environments has taken on a new meaning in light of the increased interest in space travel and colonization of other planets. And while many material experiments have been carried out on the ground and in open space in the last 50 years (LDEF, MEEP, SARE, MISSE, AOP, DSPSE, ESEM, EURECA, HST, MDIM, MIS, MPID, MPAC and SEED), many questions regarding the environmental impact of space on materials remain either poorly understood or unanswered. The coming generations of scientists will have to continue this work and tackle new challenges, continuing to build the level of confidence humans will need to continue the colonization of space. It is hoped that the proceedings of the ICPMSE-10J presented in this book will constitute a small contribution to doing so.
Download or read book Space Environmental Effects on Spacecraft written by Edward Mark Silverman and published by . This book was released on 1995 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effects of Atomic Oxygen Irradiation on Spacecraft Materials Material Degradation Studies written by Masashi Arita and published by . This book was released on 1990 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Material Selection Guidelines to Limit Atomic Oxygen Effects on Spacecraft Surfaces written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-03 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report provides guidelines in selecting materials for satellites and space platforms, designed to operate within the Low-Earth orbit environment, which limit the effects of atomic oxygen interactions with spacecraft surfaces. This document should be treated as an introduction rather than a comprehensive guide since analytical and flight technologies continue to evolve, flight experiments are conducted as primary or piggyback opportunities arise, and our understanding of materials interactions and protection methods grows. The reader is urged to consult recent literature and current web sites containing information about research and flight results.Dooling, D. and Finckenor, M. M.Marshall Space Flight CenterSPACE PLATFORMS; MATERIALS; LOW EARTH ORBITS; OXYGEN; OXYGEN ATOMS; READERS; PROTECTION
Download or read book Material Selection Guidelines to Limit Atomic Oxygen Effects on Spacecraft Surfaces written by James T. Visentine and published by . This book was released on 1989 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Atomic Oxygen Effects Measurements for Shuttle Missions Sts 8 and 41 G written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-07-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effects of the atomic oxygen interactions upon optical coatings, thin metallized films, and advanced spacecraft materials, such as high temperature coatings for infrared optical systems are summarized. Also included is a description of a generic model proposed by JPL, which may explain the atomic oxygen interaction mechanisms that lead to surface recession and weight loss. Visentine, James T. (Compiler) Johnson Space Center EARTH ORBITAL ENVIRONMENTS; OXIDATION; POSTFLIGHT ANALYSIS; SPACE SHUTTLE MISSION 41-G; SPACECRAFT CONSTRUCTION MATERIALS; SPACECRAFT GLOW; ANGULAR DISTRIBUTION; CHALLENGER (ORBITER); COMPOSITE STRUCTURES; SPACECRAFT CHARGING...
Download or read book In Space Technology Development written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-07-05 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earlier Shuttle flight experiments have shown atomic oxygen within the orbital environment can interact with many materials to produce surface recession and mass loss and combine catalytically with other constituents to generate visible and infrared glows. In addition to these effects, examinations of returned satellite hardware have shown many spacecraft materials are also susceptible to damage from high velocity impacts with orbital space debris. These effects are of particular concern for large, multi-mission spacecraft, such as Space Station and SDI operational satellites, that will operate in low-Earth orbit (LEO) during the late 1990's. Not only must these spacecraft include materials and exterior coatings that are resistant to atomic oxygen surface interactions, but these materials must also provide adequate protection against erosion and pitting that could result from numerous impacts with small particles (less than 100 microns) of orbital space debris. An overview of these concerns is presented, and activities now underway to develop materials and coatings are outlined that will provide adequate atomic protection for future spacecraft. The report also discusses atomic oxygen and orbital debris flight experiments now under development to expand our limited data base, correlate ground-based measurments with flight results, and develop an orbital debris collision warning system for use by future spacecraft. Visentine, James T. and Potter, Andrew E., Jr. Johnson Space Center ...
Download or read book In space Technology Development Atomic Oxygen and Orbital Debris Effects written by James T. Visentine and published by . This book was released on 1989 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Effects of Atomic Oxygen on the Outgassing Properties of Spacecraft Materials written by Eli Z. Gurnee and published by . This book was released on 2014 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: The space environment contains many harsh characteristics that are harmful to spacecraft and threaten the success of space missions. Atomic oxygen (AO) and outgassing are among the chief concerns that spacecraft engineers must design for in order to ensure the safety of a spacecraft. AO is monatomic oxygen (O1) that is created when Ultraviolet (UV) radiation photochemically disassociates diatomic oxygen (O2) in space. AO is the dominant atmospheric constituent between 175 and 600 km, and is a great concern in low earth orbits. Orbital AO has an average impact energy of 4.5 ± 1 eV with orbiting spacecraft and is also very reactive; this makes AO very corrosive to spacecraft materials. Outgassing is the process by which trapped and adsorbed gases are expelled from materials. The high temperatures and low pressure of the spacecraft environment exacerbate the process of outgassing. Outgassing is problematic for spacecraft because outgassed material can condense on sensitive surfaces such as optical and thermal surfaces, or the material can create clouds that impede sensors ability to observe their target. While it has been shown that many aspects of the spacecraft environment act synergistically together to further degrade spacecraft performance, there is very little information and data available on the interactions between AO and outgassing. Cal Poly’s Space Environments Lab is equipped with an AO simulation vacuum chamber (MAX) and an outgas testing chamber (Micro-VCM) which is capable of testing materials for total mass loss (TML) and collected volatile condensable mass (CVCM) outgassing values. MAX and Micro-VCM were used in tandem to test different spacecraft materials in order to determine if AO exposure had any effect on the respective materials TML and CVCM values. Prior to conducting testing, Micro-VCM was refurbished and validated since it was recently donated to Cal Poly and was not in working order upon arrival. Three Sheldahl materials were tested: aluminum coated 1.0 mil Kapton tape, 2.0 mil Kapton film coated with ITO on one side and aluminum on the other, and 2.0 Kapton film coated with aluminum. The materials were exposed to an average AO fluence of 1.33 ± 0.130 × 1021 atoms/cm2 for AO testing. The TML and CVCM results from four of the six tests did not show any significant changes between AO samples and control samples, partially due to large error bars that stem from using a semi-microbalance instead of a full microbalance. However, the AO exposed ITO-Kapton-Al did show an increase in TML from -0.03 ± 0.09% to 0.19 ± 0.08% for one procedure, while the aluminum Kapton tape CVCM decreased from 0.81 ± 0.12% to 0.63 ± 0.12% for another procedure. These results show that two materials exhibited a change in their outgassing properties after AO exposure. More testing on the subject is warranted and should be conducted in order to collect more data points and begin defining trend lines that can further describe the effects of AO on outgassing.
Download or read book Chemical Dynamics in Extreme Environments written by Rainer A. Dressler and published by World Scientific. This book was released on 2001 with total page 631 pages. Available in PDF, EPUB and Kindle. Book excerpt: As computing power increases, a growing number of macroscopic phenomena are modeled at the molecular level. Consequently, new requirements are generated for the understanding of molecular dynamics in exotic conditions. This book illustrates the importance of detailed chemical dynamics and the role it plays in the phenomenology of a number of extreme environments. Each chapter addresses one or more extreme environments, outlines the associated chemical mechanisms of relevance, and then covers the leading edge science that elucidates the chemical coupling. The chapters exhibit a balance between theory and experiment, gas phase, solid state, and surface dynamics, and geophysical and technical environments.
Download or read book Atomic Oxygen Interaction with Spacecraft Materials written by and published by . This book was released on 1991 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effects of atomic oxygen on boron nitride, silicon nitride, solar cell interconnects used on the Intelsat 6 satellite, organic polymers, and MoS2 and WS2 dry lubricant have been studied in low Earth orbit (LEO) flight experiments and in our ground-based simulation facility at Los Alamos National Laboratory. Both the in-flight and ground-based experiments employed in situ electrical resistance measurements to detect penetration of atomic oxygen through materials and ESCA analysis to measure chemical composition changes. In the presence of atomic oxygen, silver oxidizes to form silver oxide, which has a much higher electrical resistance than pure silver. Permeation of atomic oxygen through BN overcoated on thin silver was observed. No permeation of atomic oxygen through Si3N4 was observed. Test results on the Intelsat 6 satellite interconnects used on its photovoltaic array indicate that more than 60--80% of the original thickness of silver should remain after completion of the proposed Space Shuttle rescue/reboost mission. Gas phase reaction products produced by the interaction of high kinetic energy atomic oxygen (AO) with Kapton were found to be H2, H2O, CO, and CO2 with NO being a possible secondary product. Hydrogen abstraction at high AO kinetic energy is postulated to be the key reaction controlling the erosion rate of Kapton. An Arrhenius-like expression having an activation barrier of 0.4 eV can be fit to the data, which suggests that the rate limiting step in the AO/Kapton reaction mechanism can be overcome by translational energy. Oxidation of MoS2 and WS2 dry lubricants in both ground-based and orbital exposures indicated the formation of MoO3 and WO3 respectively. A protective oxide layer is formed (almost equal to)30 monolayers thick which has a high initial friction coefficient until the layer is worn off.
Download or read book Atomic Oxygen and Its Effect on Materials in Space written by Roderick Clarence Tennyson and published by . This book was released on 1992 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Atomic Oxygen Exposure of Power System and Other Spacecraft Materials written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-08-16 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to test their reactivity with Atomic Oxygen, twenty five materials were flown on the EOIM-3 (Evaluation of Oxygen Interactions with Materials) portion of the STS-46 Mission. These materials include refractory metals, candidate insulation materials, candidate radiator coatings, and a selection of miscellaneous materials. This report documents the results of the pre- and post-flight analysis of these materials. Morton, Thomas L. and Ferguson, Dale C. Glenn Research Center NASA-TM-107427, NAS 1.15:107427, E-10673 RTOP 506-41-23...
Download or read book Atomic Oxygen Protection of Materials in Low Earth Orbit written by and published by . This book was released on 2002 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: