Download or read book Engineering Plastics Handbook written by James Margolis and published by McGraw Hill Professional. This book was released on 2005-11-16 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tougher and cheaper than other materials, thermoplastic resins are used in applications ranging from aircraft frames to glass windows. This is the first authoritative source for building and evaluating new product lines. Written by a top team of international experts, this reference incorporates the chemical, mechanical, and physical data necessary to compare and evaluate existing product lines with new and emerging products.

Download or read book Plastics Determination of Izod Impact Strength written by British Standards Institute Staff and published by . This book was released on 2001-03-15 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics, Plastics and rubber technology, Physical testing, Izod impact tests, Impact testing, Notches, Brittleness, Mechanical properties of materials, Toughness, Thermoplastic polymers, Thermosetting polymers, Reinforced materials, Fibres, Specimen preparation, Dimensions

Download or read book Weathering of Plastics written by George Wypych and published by William Andrew. This book was released on 1999-12-31 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: In spite of extensive efforts, material weathering testing still requires improvement. This book presents findings and opinions of experts in material degradation testing. The aim is to improve testing methods and procedures. Materials are presented to show that photochemical degradation rate depends on a combination of environmental factors such as UV radiation, temperature, humidity, rain, stress, and concentration of reactive pollutants. The potential effect of each parameter of degradation on data gathered is discussed based on known results from a long experience in testing. This book contains data obtained in laboratories of the largest manufacturers of UV stabilizers and chemical companies that manufacture durable materials. The book gives details of testing procedures and choice of parameters of exposure which are crucial for obtaining laboratory results correlating with environmental performance of materials.In addition to exposure conditions, the book contains many suggestions on sample preparation and post-exposure testing. The effective use of these methods shortens testing time of materials and determines acceleration rate of testing. The book also gives examples of complete, well-designed weathering experiments which may be used as patterns for selection of parameters and techniques for new studies. The areas of research that still require more attention in future studies are clearly indicated.

Download or read book Standard Specification for Cold Weather Concreting ACI 306 1 90 written by ACI Committee 306 and published by . This book was released on 1998 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Plastics Acrylonitrile Butadiene Styrene ABS Moulding and Extrusion Materials Designation System and Basis for Specifications written by British Standards Institute Staff and published by . This book was released on 2002-10-22 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics, Polymers, Thermoplastic polymers, Acrylonitrile butadiene styrene, Moulding (process), Extruding, Designations, Classification systems, Softening point, Viscosity, Temperature, Impact strength, Modulus of elasticity, Styrene, Particulate materials

Download or read book Engineering Thermoplastics written by Margolis and published by CRC Press. This book was released on 1985-04-18 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This timely reference fills a large void in the range of information on engineering thermoplastics. It is the only comprehensive data source to examine the benefits and applications of major, high-performance engineering thermoplastics. Organized into separate chapters for each specific type of plastic, Engineering Thermoplastics thoroughly details the properties, advantages, and applications of each thermoplastic, facilitating comparisons between different types ... addresses subjects, such as the selection of the proper thermoplastic for each individual application, which are current and important to both research and commercial development ... provides you with the "inside" information and expertise of contributors who represent the leading plastics manufacturers. This authoritative volume -- edited by an expert with 25 years of industry and consulting experience -- is mandatory reading for plastics, design, materials, chemical, and mechanical engineers and managers in plastics, resins, and metals industries; automotive, appliance, electronics, building products, and related manufacturing industries; and organic and polymer chemists. The book is also ideal reading for advanced undergraduate and graduate plastics engineering, chemical engineering, and mechanical engineering students. Book jacket.

Download or read book Polymer Blends and Alloys written by George P. Simon and published by Routledge. This book was released on 2019-07-16 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distinguishing among blends, alloys and other types of combinations, clarifying terminology and presenting data on new processes and materials, this work present up-to-date and effective compounding techniques for polymers. It offers extensive analyses on the challenging questions that surround miscibility, compatibility, dynamic processing, interaction/phase behaviour, and computer simulations for predicting behaviours of polymer mixture and interaction.

Download or read book ACI 347R 14 Guide to Formwork for Concrete written by ACI Committee 347--Formwork for Concrete and published by . This book was released on 2014 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Environmental Management Systems written by Standards Association of Australia and published by . This book was released on 1996 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Thermoplastic Material Selection written by Eric R. Larson and published by William Andrew. This book was released on 2015-04-30 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermoplastic Material Selection: A Practical Guide presents current information on how proper material selection is a critical component of any manufactured product. The text is a practical guide to a difficult process, giving the reader a fundamental grounding in thermoplastic materials and providing the tools they need to save time, money, and frustration. The book provides an overview of the most commonly used thermoplastic materials, including discussions of the different chemical families, plastics categories, and material grades - and the implications of these differences on the material selection process. It provides fresh insights on the traditional methods of material selection based on performance and cost, and also discusses the use of non-traditional methods based on subjective evaluation. Subsequent sections include references on tools that can be used to conduct further exploration, how to accurately select the most suitable material, writing an effective material specification, and working with material suppliers and distributors. - Presents current information on how proper thermoplastics material selection is a critical component of any manufactured product - A practical guide to a difficult process, giving the reader a fundamental grounding in thermoplastics material selection and providing the tools they need to save time, money, and frustration - Delivers insights on the traditional methods of material selection based on performance and cost, and introduces nontraditional methods based on size, form, appearance, and feel

Download or read book Plastics Design Handbook written by Marlene G. Rosato and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 697 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a simplified and practical approach to designing with plastics that funda mentally relates to the load, temperature, time, and environment subjected to a product. It will provide the basic behaviors in what to consider when designing plastic products to meet performance and cost requirements. Important aspects are presented such as understanding the advantages of different shapes and how they influence designs. Information is concise, comprehensive, and practical. Review includes designing with plastics based on material and process behaviors. As de signing with any materials (plastic, steel, aluminum, wood, etc.) it is important to know their behaviors in order to maximize product performance-to-cost efficiency. Examples of many different designed products are reviewed. They range from toys to medical devices to cars to boats to underwater devices to containers to springs to pipes to buildings to aircraft to space craft. The reader's product to be designed can directly or indirectly be related to product design reviews in the book. Important are behaviors associated and interrelated with plastic materials (thermoplastics, thermosets, elastomers, reinforced plastics, etc.) and fabricating processes (extrusion, injec tion molding, blow molding, forming, foaming, rotational molding, etc.). They are presented so that the technical or non-technical reader can readily understand the interrelationships.

Download or read book SPE ANTEC 2001 Proceedings written by Spe and published by CRC Press. This book was released on 2001-05-07 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conference proceedings from 'Antec 2001' held on 6-10 May 2001 in Dallas, Texas. This includes the Volume III topic of Special Areas Color and Appearance Division.

Download or read book Handbook of Molded Part Shrinkage and Warpage written by Jerry Fischer and published by William Andrew. This book was released on 2012-12-31 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: How easy life would be if only moldings were the same size and shape as the mold. But they never are, as molders, toolmakers, designers and end users know only too well. Shrinkage means that the size is always different; warpage often changes the shape too. The effects are worse for some plastics than others. Why is that? What can you do about it? The Handbook of Molded Part Shrinkage and Warpage is the first and only book to deal specifically with this fundamental problem. Jerry Fischer’s Handbook explains in plain terms why moldings shrink and warp, shows how additives and reinforcements change the picture, sets out the effect of molding process conditions, and explains why you never can have a single ‘correct’ shrinkage value. It goes on to demonstrate how to alleviate the problem through careful design of the molded part and the mold, and by proper material selection. It also examines computer-aided methods of forecasting shrinkage and warpage. And most important of all, the Handbook gives you the data you need to work with. Authoritative and rooted in extensive industrial experience, the expert guidance contained in this handbook offers practical understanding to novices, and new insights to readers already skilled in the art of injection molding and mold making Contains the answers to common problems and detailed advice on how to control mold and post-mold shrinkage and warpage Case Studies illustrate and enrich the text; Data tables provide the empirical data that is essential for success, but hard to come by

Download or read book Fluorinated Coatings and Finishes Handbook written by Laurence W. McKeen and published by William Andrew. This book was released on 2015-10-11 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluorinated Coatings and Finishes Handbook: The Definitive User's Guide, Second Edition, addresses important, frequently posed questions by end-user design engineers, coaters, and coatings suppliers on fluorinated coatings and finishes, thus enabling them to achieve superior product qualities and shorter product and process development times. The book provides broad coverage of these fluorinated polymer coatings, including the best known PTFE, polytetrafluoroethylene, first trademarked as Teflon® and ePTFE (GoreTex®). Their inherent qualities of low surface tension, non-stick, low friction, high melting point, and chemical inertness make fluoropolymer coatings widely desirable across thousands of industrial and consumer applications, but these properties also make it difficult to convert fluoropolymers to coatings that have sufficient adhesion to the substrate to be protected. In this book, readers learn how fluoropolymer coatings are used and made, about their pigments and fillers, binders, dispersion processes, additives, and solvents. The book includes substrate preparation, coating properties, baking and curing processes, performance tests, applications, and health and safety. - Provides a practical handbook that covers the theory and practice of fluorinated coatings, including the structure and properties of binders and how to get a non-stick coating to stick to the substrate - Covers liquid and power fluorocoatings, their applications methods, curing and baking processes, and their commercial end uses - Presents detailed discussions of testing methods related to fluorocoatings, common coating defects, how they form, how to eliminate them, and the health and safety aspects of using and applying fluorocoatings - Includes substrate preparation, coating properties, baking and curing processes, performance tests, applications, and health and safety

Download or read book Management Recycling and Reuse of Waste Composites written by Vannessa Goodship and published by Elsevier. This book was released on 2009-12-18 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authoritative reference work provides a comprehensive review of the management, recycling and reuse of waste composites. These are issues which are of increasing importance due to the growing use of composites in many industries, increasingly strict legislation and concerns about disposal of composites by landfill or incineration.Part one discusses the management of waste composites and includes an introduction to composites recycling and a chapter on EU legislation for recycling waste composites. Part two reviews thermal technologies for recycling waste composites with chapters on pyrolysis, catalytic transformation, thermal treatments for energy recovery and fluidized bed pyrolysis. Part three covers mechanical methods of recycling waste composites. This section includes chapters on additives for recycled plastic composites, improving mechanical recycling and the quality and durability of mechanically recycled composites. Parts four discusses improving sustainable manufacture of composites, with chapters on environmentally-friendly filament winding of FRP composites, process monitoring and new developments in producing more functional and sustainable composites. Part five gives a review of case studies including end-of-life wind turbine blades, aerospace composites, marine composites, composites in construction and the recycling of concrete.With its distinguished editor and international team of contributors, Management, recycling and reuse of waste composites is a standard reference for anyone involved in the disposal or recycling of waste composites. - Reviews the increasingly important issues of recycling and reuse as a result of the increased use of composites - Discusses the management of waste composites and EU legislation with regards to recycling - Examines methods for recycling, including thermal technologies and mechanical methods

Download or read book Specification for Pentachlorophenol written by British Standards Institute Staff and published by . This book was released on 1959-11-30 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chlorophenol, Phenols, Crystallization, Microbiological-growth-resisting materials, Antifungal reagents, Temperature measurement, Acidimetry, Volumetric analysis, Acidity, Chemical analysis and testing, Determination of content, Insoluble matter determination, Test equipment, Gravimetric analysis, Flakes, Crystallization, Testing conditions, Dimensions

Download or read book Plastisols and Organosols written by Harold A. Sarvetnick and published by . This book was released on 1971 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: