Download or read book Assessment of High Temperature Low Cycle Fatigue Life of Austenitic Stainless Steels by Using Intergranular Damage as a Correlating Parameter written by C. Levaillant and published by . This book was released on 1982 with total page 25 pages. Available in PDF, EPUB and Kindle. Book excerpt: Strain-controlled continuous fatigue and creep-fatigue experiments are reported for two types of 316 steel tested at 600°C (1112°F). It is shown that, although the continuous fatigue properties of the two materials are very similar, the one containing a controlled amount of nitrogen exhibits a better creep-fatigue resistance than the other alloy. Detailed measurements of intergranular damage made either on the fracture surfaces or in the bulk of creep-fatigue specimens indicate that the susceptibility of the materials to the effect of tensile hold times can be related to their propensity to intergranular cracking. A stress relaxation-propagation reduction factor per cycle correlation is proposed in order to account for the detrimental effect of tensile hold times on the fatigue life. This correlation relies upon experimental results on austenitic stainless steels published in the literature. It is shown that the proposed approach, derived largely from the quantitative measurement of intergranular damage, holds some promise for predictive purposes.
Download or read book Low cycle Fatigue and Life Prediction written by Claude Amzallag and published by ASTM International. This book was released on 1982 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Temperature Component Life Assessment written by G.A. Webster and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to investigate and explain the rapid advances in the characterization of high temperature crack growth behaviour which have been made in recent years, with reference to industrial applications. Complicated mathematics has been minimized with the emphasis placed instead on finding solutions using simplified procedures without the need for complex numerical analysis.
Download or read book Low cycle Thermal Fatigue written by Gary R. Halford and published by . This book was released on 1986 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Temperature Fatigue written by R.P. Skelton and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: About 35 years ago, thermal fatigue was identified as an important phenomenon which limited the lifetime of high temperature plant. In the intervening years many investigations have been carried out, primarily to give guidance on likely endurance (especially in the presence of time dependent deformation) but latterly, with the introduction of sophisticated testing machines, to provide knowledge of the underlying mechanisms of failure. A previous edited book (Fatigue at High Temperature, Elsevier Applied Science Publishers, 1983) summarised the state-of-the-art of high temperature fatigue testing and examined the factors influencing life, such as stress state, environment and microstructural effects. It also considered, in some detail, cyclic crack growth as a more rigorous approach to life limitation. The aim of the present volume (which in style and format follows exactly the same lines as its predecessor) is once again to pursue the desire to translate detailed laboratory knowledge into engineering design and assessment. There is, for example, a need to consider the limitations of the laboratory specimen and its relationship with engineering features. Many design procedures still rely on a simple endurance approach based on failure of a smooth specimen, and this is taken to indicate crack initiation in the component. In this volume, therefore, crack propagation is covered only incidentally, emphasis being placed instead on basic cyclic stress strain properties, non-isothermal behaviour, metallography, failure criteria and the need for agreed testing procedures.
Download or read book Theoretical and Applied Mechanics written by P. Germain and published by Elsevier. This book was released on 2012-12-02 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contained in this volume are the full texts of the invited general and sectional lectures presented at this conference. The entire field of mechanics is covered, including analytical, solid and fluid mechanics and their applications. Invited papers on the following topics are also presented: Mechanics of large deformation and damage; The dynamics of two-phase flows; Mechanics of the earth's crust.The papers are written by leading experts and provide a valuable key to the latest and most important developments in various sub-fields of mechanics.
Download or read book Mechanical Behaviour of Materials at High Temperature written by C. Moura Branco and published by Springer Science & Business Media. This book was released on 1996-06-30 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the edited version of lectures and selected research contributions presented at the NATO ADVANCED STUDY INSTITUTE on MECHANICAL BEHA VI OUR OF MATERIALS AT HIGH TEMPERATURE, held in Sesimbra, Portugal, 12th-22nd September 1995, and organized by 1ST-Lisbon Institute of Technology, PortugaL The Institute was attended by 88 participants, including 15 lecturers from 17 countries including five CP countries. The lecturers were leading scientists and technologists from universities, research institutions and industry. The students were mainly young PhD students and junior academic or research staff with postgraduate qualifications (MSc or PhD). Fourteen students were from the five CP countries. The students presented research papers or posters during the Institute reporting the current progress of their research projects. A total of thirty three lectures, ten research papers and fifty posters were presented. This book does not contain the poster presentations and seven research papers were selected for publication. All the sessions were very active and quite extensive discussions on scientific aspects took place during the Institute. The Advanced Study Institute provided a forum for interaction among scientists and engineers from different areas of research, and young researchers.
Download or read book Comprehensive Structural Integrity written by Ian Milne and published by Elsevier. This book was released on 2003-07-25 with total page 4647 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this major reference work is to provide a first point of entry to the literature for the researchers in any field relating to structural integrity in the form of a definitive research/reference tool which links the various sub-disciplines that comprise the whole of structural integrity. Special emphasis will be given to the interaction between mechanics and materials and structural integrity applications. Because of the interdisciplinary and applied nature of the work, it will be of interest to mechanical engineers and materials scientists from both academic and industrial backgrounds including bioengineering, interface engineering and nanotechnology. The scope of this work encompasses, but is not restricted to: fracture mechanics, fatigue, creep, materials, dynamics, environmental degradation, numerical methods, failure mechanisms and damage mechanics, interfacial fracture and nano-technology, structural analysis, surface behaviour and heart valves. The structures under consideration include: pressure vessels and piping, off-shore structures, gas installations and pipelines, chemical plants, aircraft, railways, bridges, plates and shells, electronic circuits, interfaces, nanotechnology, artificial organs, biomaterial prostheses, cast structures, mining... and more. Case studies will form an integral part of the work.
Download or read book Fatigue of Materials and Structures written by Claude Bathias and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of mechanical structures with improved and predictable durability cannot be achieved without a thorough understanding of the mechanisms of fatigue damage and more specifically the relationships between the microstructure of materials and their fatigue properties. Written by leading experts in the field, this book (which is complementary to Fatigue of Materials and Structures: Application to Damage and Design, also edited by Claude Bathias and André Pineau), provides an authoritative, comprehensive and unified treatment of the mechanics and micromechanisms of fatigue in metals, polymers and composites. Each chapter is devoted to one of the major classes of materials or to different types of fatigue damage, thereby providing overall coverage of the field. The book deals with crack initiation, crack growth, low-cycle fatigue, gigacycle fatigue, shorts cracks, fatigue micromechanisms and the local approach to fatigue damage, corrosion fatigue, environmental effects and variable amplitude loadings, and will be an important and much used reference for students, practicing engineers and researchers studying fracture and fatigue in numerous areas of mechanical, structural, civil, design, nuclear, and aerospace engineering as well as materials science.
Download or read book ASTM Special Technical Publication written by and published by . This book was released on 1988 with total page 1322 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Behaviour of Materials written by Dominique François and published by Springer Science & Business Media. This book was released on 2012-12-24 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designing new structural materials, extending lifetimes and guarding against fracture in service are among the preoccupations of engineers, and to deal with these they need to have command of the mechanics of material behaviour. This ought to reflect in the training of students. In this respect, the first volume of this work deals with elastic, elastoplastic, elastoviscoplastic and viscoelastic behaviours; this second volume continues with fracture mechanics and damage, and with contact mechanics, friction and wear. As in Volume I, the treatment links the active mechanisms on the microscopic scale and the laws of macroscopic behaviour. Chapter I is an introduction to the various damage phenomena. Chapter II gives the essential of fracture mechanics. Chapter III is devoted to brittle fracture, chapter IV to ductile fracture and chapter V to the brittle-ductile transition. Chapter VI is a survey of fatigue damage. Chapter VII is devoted to hydrogen embrittlement and to environment assisted cracking, chapter VIII to creep damage. Chapter IX gives results of contact mechanics and a description of friction and wear mechanisms. Finally, chapter X treats damage in non metallic materials: ceramics, glass, concrete, polymers, wood and composites. The volume includes many explanatory diagrams and illustrations. A third volume will include exercises allowing deeper understanding of the subjects treated in the first two volumes.
Download or read book Aerospace Structural Metals Handbook written by and published by . This book was released on 1989 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Component Reliability under Creep Fatigue Conditions written by Janos Ginsztler and published by Springer. This book was released on 2014-05-04 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: Failure prevention, residual life assessment and life extension of materials in components operating at high temperatures are becoming increasingly important problems in the modern power plant industry. These problems are covered, and industrial examples will be introduced to illustrate the applications of those subjects covered using the results from service records.
Download or read book Advances in Fatigue Science and Technology written by C. Moura Branco and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 982 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the edited version of lectures and selected research contributions presented at the NATO ADVANCED STUDY INSTITUTE on ADVANCES IN FATIGUE SCIENCE AND TECHNOLOGY. held in Alvor. Portugal, 4th to 15th of April 1988. and organized by CEMUL - Center of Mechanics and Materials of The Technical University of Lisbon. The Institute was attended by 101 participants, including 15 lecturers. from 14 countries. The participants were leading scientists and engineers from universities, research institutions and industry. and also Ph.D~ students. Some participants presented papers during the Institute reporting the state-of-art of their research projects. All the sessions wel'e very active and quite extensive discussions on scientific aspects took place during the Institute. The Advanced Study Institute provided a forum for interaction among eminent scientists and engineers. from different schools of thought and young researchers. The Institute addressed the foundations and current state of the art of essential aspects related to fatigue science and technology, namely: Short Cracks, Metallurgical Aspects, Environmental Fatigue, Threshold Behaviour, Notch Behaviour. Creep and Fatigue Interactions at High Temperature, Multiaxial Fatigue, Low Cycle Fatigue, Methodology of Fatigue Testing, Variable Amplitude Fatigue, Fatigue of Advanced Materials. Elastic-Plastic Fatigue, and several engineering applications such as welded joints, energy systems, offshore structures, automotive industry, machine and engine components. This book is organized in three parts: Part I: Fundamentals of Fatigue Part II: Engineering Applications Part III: Research Contributions The research contributions covered most of the areas referred above.
Download or read book Grain Boundaries and Crystalline Plasticity written by Louisette Priester and published by John Wiley & Sons. This book was released on 2013-02-07 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main purpose of this book is to put forward the fundamental role of grain boundaries in the plasticity of crystalline materials. To understand this role requires a multi-scale approach to plasticity: starting from the atomic description of a grain boundary and its defects, moving on to the elemental interaction processes between dislocations and grain boundaries, and finally showing how the microscopic phenomena influence the macroscopic behaviors and constitutive laws. It involves bringing together physical, chemical and mechanical studies. The investigated properties are: deformation at low and high temperature, creep, fatigue and rupture.
Download or read book Behaviour of Defects at High Temperature written by R. A. Ainsworth and published by Wiley-Blackwell. This book was released on 1993-04-15 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: A collection of papers presented at the international conference on behaviour defects at high temperatures. Topics covered include basic observations of deformation and damage, damage modelling and the initiation of short cracks, thermo-mechanical testing including notches, parameters for creep-fatigue crack growth and assessment code development.
Download or read book Metals Abstracts written by and published by . This book was released on 1990 with total page 1590 pages. Available in PDF, EPUB and Kindle. Book excerpt:
