Download or read book Identification of Dynamic Systems written by Rolf Isermann and published by Springer. This book was released on 2011-04-08 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: Precise dynamic models of processes are required for many applications, ranging from control engineering to the natural sciences and economics. Frequently, such precise models cannot be derived using theoretical considerations alone. Therefore, they must be determined experimentally. This book treats the determination of dynamic models based on measurements taken at the process, which is known as system identification or process identification. Both offline and online methods are presented, i.e. methods that post-process the measured data as well as methods that provide models during the measurement. The book is theory-oriented and application-oriented and most methods covered have been used successfully in practical applications for many different processes. Illustrative examples in this book with real measured data range from hydraulic and electric actuators up to combustion engines. Real experimental data is also provided on the Springer webpage, allowing readers to gather their first experience with the methods presented in this book. Among others, the book covers the following subjects: determination of the non-parametric frequency response, (fast) Fourier transform, correlation analysis, parameter estimation with a focus on the method of Least Squares and modifications, identification of time-variant processes, identification in closed-loop, identification of continuous time processes, and subspace methods. Some methods for nonlinear system identification are also considered, such as the Extended Kalman filter and neural networks. The different methods are compared by using a real three-mass oscillator process, a model of a drive train. For many identification methods, hints for the practical implementation and application are provided. The book is intended to meet the needs of students and practicing engineers working in research and development, design and manufacturing.

Download or read book Modelling and Control of Dynamic Systems Using Gaussian Process Models written by Juš Kocijan and published by Springer. This book was released on 2015-11-21 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph opens up new horizons for engineers and researchers in academia and in industry dealing with or interested in new developments in the field of system identification and control. It emphasizes guidelines for working solutions and practical advice for their implementation rather than the theoretical background of Gaussian process (GP) models. The book demonstrates the potential of this recent development in probabilistic machine-learning methods and gives the reader an intuitive understanding of the topic. The current state of the art is treated along with possible future directions for research. Systems control design relies on mathematical models and these may be developed from measurement data. This process of system identification, when based on GP models, can play an integral part of control design in data-based control and its description as such is an essential aspect of the text. The background of GP regression is introduced first with system identification and incorporation of prior knowledge then leading into full-blown control. The book is illustrated by extensive use of examples, line drawings, and graphical presentation of computer-simulation results and plant measurements. The research results presented are applied in real-life case studies drawn from successful applications including: a gas–liquid separator control; urban-traffic signal modelling and reconstruction; and prediction of atmospheric ozone concentration. A MATLAB® toolbox, for identification and simulation of dynamic GP models is provided for download.

Download or read book Iterative Identification and Control written by P. Albertos Pérez and published by Springer Science & Business Media. This book was released on 2002-05-21 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: An exposition of the interplay between the modelling of dynamic systems and the design of feedback controllers based on these models. The authors of individual chapters are some of the most renowned and authoritative figures in the fields of system identification and control design.

Download or read book Modeling of Dynamic Systems written by Lennart Ljung and published by Prentice Hall. This book was released on 1994 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a recognized authority in the field of identification and control, this book draws together into a single volume the important aspects of system identification AND physical modelling. KEY TOPICS: Explores techniques used to construct mathematical models of systems based on knowledge from physics, chemistry, biology, etc. (e.g., techniques with so called bond-graphs, as well those which use computer algebra for the modeling work). Explains system identification techniques used to infer knowledge about the behavior of dynamic systems based on observations of the various input and output signals that are available for measurement. Shows how both types of techniques need to be applied in any given practical modeling situation. Considers applications, primarily simulation. MARKET: For practicing engineers who are faced with problems of modeling.

Download or read book Modeling Analysis And Control Of Dynamical Systems With Friction And Impacts written by Pawel Olejnik and published by #N/A. This book was released on 2017-07-07 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is aimed primarily towards physicists and mechanical engineers specializing in modeling, analysis, and control of discontinuous systems with friction and impacts. It fills a gap in the existing literature by offering an original contribution to the field of discontinuous mechanical systems based on mathematical and numerical modeling as well as the control of such systems. Each chapter provides the reader with both the theoretical background and results of verified and useful computations, including solutions of the problems of modeling and application of friction laws in numerical computations, results from finding and analyzing impact solutions, the analysis and control of dynamical systems with discontinuities, etc. The contents offer a smooth correspondence between science and engineering and will allow the reader to discover new ideas. Also emphasized is the unity of diverse branches of physics and mathematics towards understanding complex piecewise-smooth dynamical systems. Mathematical models presented will be important in numerical experiments, experimental measurements, and optimization problems found in applied mechanics.

Download or read book Data Driven Science and Engineering written by Steven L. Brunton and published by Cambridge University Press. This book was released on 2022-05-05 with total page 615 pages. Available in PDF, EPUB and Kindle. Book excerpt: A textbook covering data-science and machine learning methods for modelling and control in engineering and science, with Python and MATLAB®.

Download or read book Fuzzy Model Identification for Control written by Janos Abonyi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents new approaches to constructing fuzzy models for model-based control. Simulated examples and real-world applications from chemical and process engineering illustrate the main methods and techniques. Supporting MATLAB and Simulink files create a computational platform for exploration of the concepts and algorithms.

Download or read book Process Modelling Identification and Control written by Ján Mikleš and published by Springer Science & Business Media. This book was released on 2007-06-30 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: This compact and original reference and textbook presents the most important classical and modern essentials of control engineering in a single volume. It constitutes a harmonic mixture of control theory and applications, which makes the book especially useful for students, practicing engineers and researchers interested in modeling and control of processes. Well written and easily understandable, it includes a range of methods for the analysis and design of control systems.

Download or read book System Identification written by Rik Pintelon and published by John Wiley & Sons. This book was released on 2004-04-05 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrical Engineering System Identification A Frequency Domain Approach How does one model a linear dynamic system from noisy data? This book presents a general approach to this problem, with both practical examples and theoretical discussions that give the reader a sound understanding of the subject and of the pitfalls that might occur on the road from raw data to validated model. The emphasis is on robust methods that can be used with a minimum of user interaction. Readers in many fields of engineering will gain knowledge about: * Choice of experimental setup and experiment design * Automatic characterization of disturbing noise * Generation of a good plant model * Detection, qualification, and quantification of nonlinear distortions * Identification of continuous- and discrete-time models * Improved model validation tools and from the theoretical side about: * System identification * Interrelations between time- and frequency-domain approaches * Stochastic properties of the estimators * Stochastic analysis System Identification: A Frequency Domain Approach is written for practicing engineers and scientists who do not want to delve into mathematical details of proofs. Also, it is written for researchers who wish to learn more about the theoretical aspects of the proofs. Several of the introductory chapters are suitable for undergraduates. Each chapter begins with an abstract and ends with exercises, and examples are given throughout.

Download or read book Modeling Identification and Simulation of Dynamical Systems written by P. P. J. van den Bosch and published by CRC Press. This book was released on 2020-12-17 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives an in-depth introduction to the areas of modeling, identification, simulation, and optimization. These scientific topics play an increasingly dominant part in many engineering areas such as electrotechnology, mechanical engineering, aerospace, and physics. This book represents a unique and concise treatment of the mutual interactions among these topics. Techniques for solving general nonlinear optimization problems as they arise in identification and many synthesis and design methods are detailed. The main points in deriving mathematical models via prior knowledge concerning the physics describing a system are emphasized. Several chapters discuss the identification of black-box models. Simulation is introduced as a numerical tool for calculating time responses of almost any mathematical model. The last chapter covers optimization, a generally applicable tool for formulating and solving many engineering problems.

Download or read book Modelling and Identification with Rational Orthogonal Basis Functions written by Peter S.C. Heuberger and published by Springer Science & Business Media. This book was released on 2005-06-30 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Models of dynamical systems are of great importance in almost all fields of science and engineering and specifically in control, signal processing and information science. A model is always only an approximation of a real phenomenon so that having an approximation theory which allows for the analysis of model quality is a substantial concern. The use of rational orthogonal basis functions to represent dynamical systems and stochastic signals can provide such a theory and underpin advanced analysis and efficient modelling. It also has the potential to extend beyond these areas to deal with many problems in circuit theory, telecommunications, systems, control theory and signal processing. Modelling and Identification with Rational Orthogonal Basis Functions affords a self-contained description of the development of the field over the last 15 years, furnishing researchers and practising engineers working with dynamical systems and stochastic processes with a standard reference work.

Download or read book Technology for Large Space Systems written by and published by . This book was released on 1986 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modeling Identification and Control for Cyber Physical Systems Towards Industry 4 0 written by Paolo Mercorelli and published by Elsevier. This book was released on 2024-01-09 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling, Identification, and Control for Cyber-Physical Systems Towards Industry 4.0 studies and analyzes the role of algorithms in identifying and controlling such a system towards Industry 4.0, which is the digital transformation of manufacturing and related industries and value creation processes. This book focuses on the conception and implementation of intelligent algorithms. It will help readers who work on sensors, virtual sensors, actuators and virtual actuators embedded systems, network infrastructures, servers with computing and storage capacity, autonomous computing software, real-time data processing, and database graphical user interfaces wireless networking technologies. Cyber-Physical Systems are network components that coordinate physical actions with each other. These autonomous systems perceive their surroundings using virtual sensors and actively influence them via virtual actuators. Adaptable and continuously evolving, these systems free up skilled workers to perform complex tasks, avoiding productivity loss and re-work. - Provides the new and cutting-edge research and development and a series of guidance procedures for potential applications from academic research to industrial R&D - Focuses on the conception and implementation of intelligent algorithms - Covers a wide spectrum of topics, including sensors, virtual sensors, actuators and virtual actuators embedded systems, network infrastructures, servers with computing and storage capacity, autonomous computing software, real-time data processing, and database graphical user interfaces wireless networking technologies

Download or read book Lectures on Nonlinear Dynamics written by José Roberto Castilho Piqueira and published by Springer Nature. This book was released on 2024-01-03 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a compilation of lectures delivered at the São Paulo School of Advanced Sciences on Nonlinear Dynamics, categorized into four groups: parametric resonance, nonlinear modal analysis and model reduction, synchronization, and strongly nonlinear dynamics. Interwoven seamlessly, these groups cover a wide range of topics, from fundamental concepts to practical applications, catering to both introductory and advanced readers. The first group, consisting of chapters 1 and 2, serves as an introduction to the theory of parametric resonance and the dynamics of parametrically excited slender structures. Chapters 3, 4, and 5 form the second group, offering insights into normal forms, nonlinear normal modes, and nonlinear system identification. Chapters 6 and 7 delve into asynchronous modes of structural vibration and master-slave topologies for time signal distribution within synchronous systems, respectively, representing the third group. Finally, the last four chapters tackle the fourth group, exploring nonlinear dynamics of variable mass oscillators, advanced analytical methods for strong nonlinear vibration problems, chaos theory, and dynamic integrity from the perspectives of safety and design. This book harmoniously combines theoretical depth and practical relevance to provide a comprehensive understanding of nonlinear dynamics.

Download or read book Spatio Temporal Modeling of Nonlinear Distributed Parameter Systems written by Han-Xiong Li and published by Springer Science & Business Media. This book was released on 2011-02-24 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this volume is to provide a brief review of the previous work on model reduction and identifi cation of distributed parameter systems (DPS), and develop new spatio-temporal models and their relevant identifi cation approaches. In this book, a systematic overview and classifi cation on the modeling of DPS is presented fi rst, which includes model reduction, parameter estimation and system identifi cation. Next, a class of block-oriented nonlinear systems in traditional lumped parameter systems (LPS) is extended to DPS, which results in the spatio-temporal Wiener and Hammerstein systems and their identifi cation methods. Then, the traditional Volterra model is extended to DPS, which results in the spatio-temporal Volterra model and its identification algorithm. All these methods are based on linear time/space separation. Sometimes, the nonlinear time/space separation can play a better role in modeling of very complex processes. Thus, a nonlinear time/space separation based neural modeling is also presented for a class of DPS with more complicated dynamics. Finally, all these modeling approaches are successfully applied to industrial thermal processes, including a catalytic rod, a packed-bed reactor and a snap curing oven. The work is presented giving a unifi ed view from time/space separation. The book also illustrates applications to thermal processes in the electronics packaging and chemical industry. This volume assumes a basic knowledge about distributed parameter systems, system modeling and identifi cation. It is intended for researchers, graduate students and engineers interested in distributed parameter systems, nonlinear systems, and process modeling and control.

Download or read book Model Identification and Adaptive Control written by Graham Goodwin and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on a workshop entitled.: Model " Identification and Adap tive Control: From Windsurfing to Telecommunications" held in Sydney, Aus tralia, on December 16, 2000. The workshop was organized in honour of Pro fessor Brian (BDO) Anderson in recognition of his seminal contributions to systems science over the past 4 decades. . The chapters in the book have been written by colleagues, friends and stu dents of Brian Anderson. A central theme of the book is the inter relationship between identification and the use of models in real world applications. This theme has underpinned much of Brian Anderson's own contributions. The book reflects on these contributions as well as makirig important statements about possible future research directions. The subtitle of the book (From Windsurfing to Telecommunications) rec ognizes the fact that many common life experiences, such as those we en counter when learning to ride a windsurfer are models for design methods that can be used on real world advanced technological control problems. In deed, Brian Anderson extensively explored this link in his research work.

Download or read book Automating Data Driven Modelling of Dynamical Systems written by Dhruv Khandelwal and published by Springer Nature. This book was released on 2022-02-03 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a user-friendly, evolutionary algorithms-based framework for estimating data-driven models for a wide class of dynamical systems, including linear and nonlinear ones. The methodology addresses the problem of automating the process of estimating data-driven models from a user’s perspective. By combining elementary building blocks, it learns the dynamic relations governing the system from data, giving model estimates with various trade-offs, e.g. between complexity and accuracy. The evaluation of the method on a set of academic, benchmark and real-word problems is reported in detail. Overall, the book offers a state-of-the-art review on the problem of nonlinear model estimation and automated model selection for dynamical systems, reporting on a significant scientific advance that will pave the way to increasing automation in system identification.