Download or read book Advanced technologies in flow dynamics and combustion in propulsion and power volume II written by Lei Luo and published by Frontiers Media SA. This book was released on 2023-02-09 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Active Flow and Combustion Control 2018 written by Rudibert King and published by Springer. This book was released on 2018-09-03 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book reports on the latest theoretical and experimental findings in the field of active flow and combustion control. It covers new developments in actuator technology and sensing, in robust and optimal open- and closed-loop control, as well as in model reduction for control, constant volume combustion and dynamic impingement cooling. The chapters reports oncutting-edge contributions presented during the fourth edition of the Active Flow and Combustion Control conference, held in September 19 to 21, 2018 at the Technische Universität Berlin, in Germany. This conference, as well as the research presented in the book, have been supported by the collaborative research center SFB 1029 on “Substantial efficiency increase in gas turbines through direct use of coupled unsteady combustion and flow dynamics”, funded by the DFG (German Research Foundation). It offers a timely guide for researchers and practitioners in the field of aeronautics, turbomachinery, control and combustion.

Download or read book Proceedings of the 10th International Conference on Rotor Dynamics IFToMM written by Katia Lucchesi Cavalca and published by Springer. This book was released on 2018-08-20 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: IFToMM conferences have a history of success due to the various advances achieved in the field of rotor dynamics over the past three decades. These meetings have since become a leading global event, bringing together specialists from industry and academia to promote the exchange of knowledge, ideas, and information on the latest developments in the dynamics of rotating machinery. The scope of the conference is broad, including e.g. active components and vibration control, balancing, bearings, condition monitoring, dynamic analysis and stability, wind turbines and generators, electromechanical interactions in rotor dynamics and turbochargers. The proceedings are divided into four volumes. This first volume covers the following main topics: Active Components and Vibration Control; Balancing; Bearings: Fluid Film Bearings, Magnetic Bearings, Rolling Bearings and Seals; and Blades, Bladed Systems and Impellers.

Download or read book Marine Engines Performance and Emissions written by María Isabel Lamas Galdo and published by MDPI. This book was released on 2021-09-02 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains a collection of peer-review scientific papers about marine engines’ performance and emissions. These papers were carefully selected for the “Marine Engines Performance and Emissions” Special Issue of the Journal of Marine Science and Engineering. Recent advancements in engine technology have allowed designers to reduce emissions and improve performance. Nevertheless, further efforts are needed to comply with the ever increased emission legislations. This book was conceived for people interested in marine engines. This information concerning recent developments may be helpful to academics, researchers, and professionals engaged in the field of marine engineering.

Download or read book Fiber Reinforced Composites Recent Advances New Perspectives and Applications written by Longbiao Li and published by BoD – Books on Demand. This book was released on 2024-09-18 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fiber-reinforced composites have been widely applied in different industrial areas. This book focuses on the recent advances, new perspectives, and applications of different fiber-reinforced composites, such, as ceramic-matrix composites, fiber-reinforced concrete, wood–plastic composites, and so on. The design, fabrication, and application of fiber-reinforced composites are related to the high mechanical properties and nondestructive damage monitoring techniques. The experimental and damage monitoring method can reveal the internal damage evolution process inside of the fiber-reinforced composites and improve the operation reliability and safety of the composites and components. The book can help composite researchers better understand the engineering application, mechanical behavior, and damage detection of fiber-reinforced composites.

Download or read book Wind Energy Exploitation in Urban Environment written by Lorenzo Battisti and published by Springer. This book was released on 2019-04-23 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents numerical and experimental research in the field of wind energy exploitation in urban environments. It comprises a selection of the best papers from the international colloquium “Research and Innovation on Wind Energy Exploitation in Urban Environment” (TUrbWind), held in Riva del Garda, Italy in September 2018. The book includes contributions from different research fields in urban wind resources, wind energy conversion systems, and urban integration, mainly focusing on the following topics: · turbine concepts for urban and sub-urban environment; · measuring and modelling wind resource; · rotor aerodynamics, wakes and noise; · design, loads, and supporting structures; · novel shapes and materials; · building concepts for wind energy exploitation; · planning approaches for wind exploitation in urban areas. It is a valuable resource for researchers and practitioners interested in the integration of wind energy systems and turbines in urban areas.

Download or read book Small Scale Energy Systems with Gas Turbines and Heat Pumps written by Satoru Okamoto and published by MDPI. This book was released on 2021-03-29 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: A heat pump system can produce an amount of heat energy that is greater than the amount of energy used to run the heat pump system. Thus, a heat pump system is considered to be a machine system that can use energies efficiently, as is the load leveling air-conditioning system utilizing unutilized energies at high levels. Adaptations of gas turbines for industrial, utility, and marine-propulsion applications have long been accepted as means for generating power with high efficiency and ease of maintenance. Cogeneration with gas turbine is frequently defined as the sequential production of useful thermal energy and shaft power from a single energy source. For applications that generate electricity, the power can either be used internally or supplied to the utility grid. This Special Issue intends to provide an overviews of the existing knowledge related with various aspects of “Small-Scale Energy Systems with Gas Turbines and Heat Pumps”, and contributions on, but not limited to the following subjects were encouraged: wake of stator vane to improve sealing effectiveness; gas turbine cycle with external combustion chamber for prosumer and distributed energy systems; computational simulation of gas turbine engine operating with different blends of biodiesel; experimental methodology and facility for the engine performance and emissions evaluation using jet and biodiesel blends; experimental analysis of an air heat pump for heating service; hybrid fuel cell-Brayton cycle for combined heat and power; design analysis of micro gas turbines in closed cycles. Seven papers were published in the Special Issue out of a total of 12 submitted.

Download or read book Stabilization and Dynamic of Premixed Swirling Flames written by Paul Palies and published by Academic Press. This book was released on 2020-07-03 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stabilization and Dynamic of Premixed Swirling Flames: Prevaporized, Stratified, Partially, and Fully Premixed Regimes focuses on swirling flames in various premixed modes (stratified, partially, fully, prevaporized) for the combustor, and development and design of current and future swirl-stabilized combustion systems. This includes predicting capabilities, modeling of turbulent combustion, liquid fuel modeling, and a complete overview of stabilization of these flames in aeroengines. The book also discusses the effects of the operating envelope on upstream fresh gases and the subsequent impact of flame speed, combustion, and mixing, the theoretical framework for flame stabilization, and fully lean premixed injector design. Specific attention is paid to ground gas turbine applications, and a comprehensive review of stabilization mechanisms for premixed, partially-premixed, and stratified premixed flames. The last chapter covers the design of a fully premixed injector for future jet engine applications. - Features a complete view of the challenges at the intersection of swirling flame combustors, their requirements, and the physics of fluids at work - Addresses the challenges of turbulent combustion modeling with numerical simulations - Includes the presentation of the very latest numerical results and analyses of flashback, lean blowout, and combustion instabilities - Covers the design of a fully premixed injector for future jet engine applications

Download or read book Aerospace and Associated Technology written by Anup Ghosh and published by Taylor & Francis. This book was released on 2022-09-24 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Conference on Theoretical Applied Computational and Experimental Mechanics is organized every three years by the Department of Aerospace Engineering IIT Kharagpur. The conference is devoted to providing a platform for scientists and engineers to exchange their views on the latest developments in Mechanics since 1998. ICTACEM Conference is aimed at bringing together academics and researchers working in various disciplines of mechanics to exchange views as well as to share knowledge between people from different parts of the globe. The 8th ICTACEM was held from December 20-22, 2021, at the Indian Institute of Technology, Kharagpur.

Download or read book Optimum Choice of Energy System Configuration and Storages for a Proper Match between Energy Conversion and Demands written by Andrea Lazzaretto and published by MDPI. This book was released on 2020-01-31 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue addresses the general problem of a proper match between the demands of energy users and the units for energy conversion and storage, by means of proper design and operation of the overall energy system configuration. The focus is either on systems including single plants or groups of plants, connected or not to one or more energy distribution networks. In both cases, the optimum design and operation involve decisions about thermodynamic processes, about the type, number, design parameters of components/plants, and storage capacities, and about mutual interconnections and the interconnections with the distribution grids. The problem is absolutely general, encompassing design and operation of energy systems for single houses, groups of houses, industries, industrial districts, municipal areas, regions and countries. The presented papers show that similar approaches can be used in different applications, although a general standard has not been achieved yet.

Download or read book Incentives to value the dispatchable fleet s operational flexibility across energy markets written by Eglantine Künle and published by Cuvillier Verlag. This book was released on 2018-11-07 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: The work at hand participates with the energy transition toward decarbonized electricity production by providing a method to analyze the incentives for the dispatchable fleet to provide flexibility. It analyzes the signals set by the energy markets to investors and power plant operators regarding flexible power plant operation and the future requirement of thermal plant flexibilisation, with improvement suggestions. A method for the quantitative, long-term, high-resolution techno-economic assessment of an individual power plant’s operational flexibility is proposed. It includes the single unit self-scheduling problem of a merchant power plant solved from a price-taker perspective in the day-ahead, intraday and frequency control markets, as well as a parametric power plant model suited for operational flexibility assessments. The retroactive observation of the merchant power plants’ operation strategies in these markets is used to identify best practices in terms of market design for flexibility incentives. The value of operational flexibility improvements is quantified using various metrics, for different technologies and market environments. Despite their sensitivity to market design, technologies and cost structures, these results indicate that if investors further expect a three to five-year return on investment, the existing European conventional fleet is unlikely to experience a significant flexibilization.

Download or read book Design and Manufacturing written by Evren Yasa and published by BoD – Books on Demand. This book was released on 2020-07-29 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: In product development, decisions taken in design and manufacturing are considered the most influential factors for succeeding commercialisation. Product development is a complex integrated process of several steps starting from design where the market needs are identified and turned into competitive product specifications and different design concepts. In other words, design is about identifying a problem, developing solution proposals, and validating the most feasible solution with real users. Manufacturing technologies, on the other hand, help designers to make those virtual models into physical parts by transforming different types of raw materials. This book on design and manufacturing, written by a number of experts from all over the world, presents a design perspective and different manufacturing applications from various industrial sectors.

Download or read book 15th International Conference on Turbochargers and Turbocharging written by Institution of Mechanical Engineers and published by CRC Press. This book was released on 2023-05-05 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Institution’s International Conference on Turbochargers and Turbocharging (Twickenham, London, UK, 16-17 May 2023) returns to address the latest advances, research and developments in turbocharging system designs and boosting solutions. This volume presents a peer-reviewed collection of papers which will address current and novel turbocharging system choices and components with a renewed emphasis to address the challenges posed by emission regulations and market trends. The latest developments leading to enhanced performance and efficiency, increased durability and reduced emissions in line with meeting Net-Zero and global emissions targets. Topics include: Air management in powertrains: conventional, hybrids, fuel cells and novel configurations Alternate fuels and their needs in boosting (e.g. hydrogen, synthetic fuels) Electrification of turbochargers, compressors, and exhaust turbines Simulation and testing techniques, data analytics, including AI and digital twins Thermal management, waste heat recovery and expanders Turbomachinery aerodynamic: novel compressors & turbines and multi-stage systems. Component fatigue life, bearing design, rotor-dynamics and durability prediction Mechatronics, control, sensors and power electronics High speed turbomachinery in propulsion and power systems Future Legislation needs for thermal propulsion systems

Download or read book Mathematical Modelling of Energy Systems and Fluid Machinery written by Mirko Morini and published by MDPI. This book was released on 2021-06-04 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ongoing digitalization of the energy sector, which will make a large amount of data available, should not be viewed as a passive ICT application for energy technology or a threat to thermodynamics and fluid dynamics, in the light of the competition triggered by data mining and machine learning techniques. These new technologies must be posed on solid bases for the representation of energy systems and fluid machinery. Therefore, mathematical modelling is still relevant and its importance cannot be underestimated. The aim of this Special Issue was to collect contributions about mathematical modelling of energy systems and fluid machinery in order to build and consolidate the base of this knowledge.

Download or read book Theoretical Computational and Experimental Solutions to Thermo Fluid Systems written by Muthukumar Palanisamy and published by Springer Nature. This book was released on 2021-03-09 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the International Conference on Innovations in Thermo-Fluid Engineering and Sciences (ICITFES 2020). It covers topics in theoretical and experimental fluid dynamics, numerical methods in heat transfer and fluid mechanics, different modes of heat transfer, multiphase flow, fluid machinery, fluid power, refrigeration and air conditioning, and cryogenics. The book will be helpful to the researchers, scientists, and professionals working in the field of fluid mechanics and machinery, and thermal engineering.

Download or read book High Performance Computing in Science and Engineering 21 written by Wolfgang E. Nagel and published by Springer Nature. This book was released on 2023-03-03 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state-of-the-art in supercomputer simulation. It includes the latest findings from leading researchers using systems from the High Performance Computing Center Stuttgart (HLRS) in 2021. The reports cover all fields of computational science and engineering ranging from CFD to computational physics and from chemistry to computer science with a special emphasis on industrially relevant applications. Presenting findings of one of Europe’s leading systems, this volume covers a wide variety of applications that deliver a high level of sustained performance. The book covers the main methods in high-performance computing. Its outstanding results in achieving the best performance for production codes are of particular interest for both scientists and engineers. The book comes with a wealth of color illustrations and tables of results.

Download or read book Innovative Design Analysis and Development Practices in Aerospace and Automotive Engineering written by Nicolas Gascoin and published by Springer Nature. This book was released on 2020-09-26 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the best articles presented by researchers and industrial experts at the International Conference on “Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering (I-DAD 2020)”. The papers discuss new design concepts, and analysis and manufacturing technologies, with a focus on achieving improved performance by downsizing; improving the strength-to-weight ratio, fuel efficiency and operational capability at room and elevated temperatures; reducing wear and tear; addressing NVH aspects, while balancing the challenges of Euro VI/Bharat Stage VI emission norms, greenhouse effects and recyclable materials. Presenting innovative methods, this book is a valuable reference resource for professionals at educational and research organizations, as well as in industry, encouraging them to pursue challenging projects of mutual interest.