Download or read book The Art of Gem Cutting Including Cabochons Faceting Spheres Tumbling and Special Techniques written by H. C. Dake and published by Read Books Ltd. This book was released on 2012-12-21 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: This antiquarian book contains a detailed and practical guide to gem cutting as a hobby, with information on cabochons, faceting, spheres, tumbling, special techniques, and more. An exhaustive manual with complete instructions for tool use and all the elementary information a prospective lapidary might need to know, this book constitutes a must-read for anyone looking to begin a hobby in gem cutting. The chapters of this book include: “Gem Cutting as a Hobby”, “Type of Equipment”, “Four Operations”, “Sawing”, “Mud Sawing”, “Diamond Blade Saws”, “Sawing Coolants Water Versus Kerosene”, “Diamond Saw Trouble”, “Power Feed Saws”, “Sawing Large Specimens”, etcetera. This vintage text is being republished now in an affordable, modern, high quality edition - complete with a specially commissioned new introduction on gemmology.
Download or read book Gem Cutting written by John Sinkankas and published by . This book was released on 1955 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Art of Gem Cutting written by Henry Carl Dake and published by . This book was released on 1963 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Faceting History Cutting Diamonds and Colored Stones written by Glenn Klein and published by Xlibris Corporation. This book was released on 2005-10-13 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author of, "FACETING HISTORY: CUTTING DIAMONDS AND COLORED STONES" has for a long time had a deep interest in learning how the early faceters (cutters) of diamonds and colored gemstones were able to complete their work. What methods did they use? What equipment did they have to make success possible? How soon did they discover how to complete the many phases necessary to accomplish their work? How did the equipment and methods differ between fashioning diamonds and faceting colored stones? These are just a few of the questions that the author wanted to find the answers for. In looking for answers to these and other questions, the author found that there were bits and pieces of information available in many previous books, but there was not a good book available that would answer most of his questions. Upon hearing the author ́s remarks about this fact, one of the librarians at the wonderful library located at the Gemological Institute of America ́s Carlsbad campus said that if such a book was not available, "maybe you should write the book!" Well, the author had been thinking of doing just that, but the remark caused the author to see the light and agree to get started on the project. Little did he know then that the project would require many months of eight hour days over seven day weeks to get the book completed. He decided to write a book that would answer these and other related questions that he had. The thought also occurred to him that such a book would be a valuable volume to be placed in libraries of individual faceters around the world. He realized that such a book would also be of great value to anyone who works behind a Jewelry store counter. A successful sales person is one who is knowledgeable about the products that they are selling. A book of faceting information would be extremely valuable if read and re-read from time to time. A customer in the Jewelry store will no doubt be favorably impressed by a sales presentation that is made with the use of interesting and informative information about diamonds and the various colored gemstones. The customer will be convinced that the sales person knows about what they are talking. The author has spent nearly three years on the project of researching the GIA library and other libraries, along with the extensive personal library of gemstone related books that he personally possesses. Many conflicting reports were noted in his study. He has made the statements in his book reflect the most commonly accepted opinions, of the most respected authors ́ works that he has found in his research. History is only obtainable from the earlier works of other authors. We cannot go back to the long past centuries ourselves, to see first hand what really happened and when it happened. A study of faceting history requires making the best choices of the information that is available. This completed book answers questions as to why the fashioning of diamonds was/is so different from the faceting of colored gemstones. The book compares the needed equipment and the methods that have brought the greatest successes. In addition, a great deal of other information connected to faceting is included. There are seven chapters in the book and there are over 125 photographs of the early equipment and methods that were used. The photographs show the faceters, the workroom conditions, and the tools and equipment that they used to complete beautiful and lasting gemstones. The book chapters are titled: An Introduction to Faceting, Early Man ́s Stone Appreciation, Diamond Fashioning Procedure and Equipment, Colored Stone Faceting Procedure and Equipment, The Evolution of Cut Designs, Famous and Historic Gemstones, Sources of Diamond and Colored Stone Rough, and lastly, Advances in Faceting Over the Past One Hundred Years. By books end, the reader will be well informed as to what is r
Download or read book Gemstone Tumbling Cutting Drilling Cabochon Making written by Jim Magnuson and published by Adventure Publications. This book was released on 2015-05-15 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Beginner Instructions, Professional Results! Gemstones are naturally beautiful, but you can make them glisten and shine. This beginner’s guide covers all the techniques you need to know: tumbling, cutting, face polishing and more. By following the authors’ simple approach, you’ll create finished stones worthy of displaying, selling or making into jewelry. Book Features: pertains to a wide range of popular gemstones, from agates to turquoise prevents frustration, with detailed photos and easy-to-follow instructions offers helpful tips from the authors’ years of experience provides information about recommended equipment and supplies briefly introduces jewelry making, with seven simple jewelry projects
Download or read book The Art of Gem Cutting written by Fred S. Young and published by Codman Press. This book was released on 2011-06 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: The working of rough materials into useful tools, weapons, and ornaments dates back to time immemorial. It is known that man lived in the stone age for thousands of years, when the only useful tools and weapons available were those which could be fashioned from the minerals and rocks provided by Nature. At least one hundred thousand years ago primitive man first learned the art of working an edge or point on some hard mineral, to be used as a tool or weapon. Later came the development of the lapidary art for the production of ornaments, and, ever since, precious stones have been an important part of human culture. Contained within this fascinating book is an interesting and informative treatise on gem-cutting, detailing its history, development, and modern application. A perfect book for anyone interested in the subject, this book will also make a great addition to any collection of gemmological literature. The sections of this book are: Cabochon Cutting, Facet Cutting, and Gemmology, each containing detailed subchapters within. We are proud to republish this scarce antiquarian book complete with a new introduction to the subject.
Download or read book Cabochon Cutting A Collection of Historical Articles on the Methods and Equipment Used for Working Gemstones written by Various and published by Read Books Ltd. This book was released on 2015-05-06 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains classic material dating back to the 1900s and before. The content has been carefully selected for its interest and relevance to a modern audience. Carefully selecting the best articles from our collection we have compiled a series of historical and informative publications on the subjects of gemology and crystallography. The titles in this range include "Gemstone Manufacturing" "The Optical Properties of Gemstones and Crystals" "The Thirty-Two Classes of Crystal Symmetry" and many more. Each publication has been professionally curated and includes all details on the original source material. This particular instalment, "Cabochon Cutting" contains information on the methods and equipment of the gem cutter. Intended to illustrate the main aspects of cabochon cutting it is a comprehensive guide for anyone wishing to obtain a general knowledge of the subject and to understand the field in its historical context. We are republishing these classic works in affordable, high quality, modern editions, using the original text and artwork.
Download or read book Gem Cutting for Beginners written by Dustin Kaitlyn and published by Independently Published. This book was released on 2022-11-02 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Beginners techniques on how to begin gem cutting and more This book will walk you through the step-by-step procedures needed to cut your own gemstones and look like a pro while doing it.You already possess the drive necessary to begin making your dream a reality because you are interested in learning more about gemstone cutting. But as you are aware, having a dream and actually achieving it are two very different things. You might be considering... How on earth do people sculpt tiny bits of stone into elaborate patterns? Do I possess the necessary skills to cut gemstones? What supplies do I need to purchase in order to fulfill my dream in terms of tools and equipment? How long will it take to learn lapidary, exactly? Before you dive into lapidary, you may want to think about these and other issues. However, the fact that you are considering them proves that this book is exactly what you require. We will go over subjects like: How to begin, including an understanding of what lapidary is and its fundamentals For beginners, the ins and outs of tumbling, as well as how to go about the tumbling process Basic cutting techniques for beginners The act of cutting a cabochon The fundamentals of faceting for beginners, including step-by-step instructions for the faceting procedure plus a lot more! This book will show you the different methods you can use to simplify your work, even if you have no idea where to begin!
Download or read book Beginner Lapidary written by Dorian Getachew and published by . This book was released on 2021-08-15 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gem cutting, or lapidary, most certainly got its start as an offshoot of mundane everyday activities. A stone may have fallen into a fire where the heat caused it to break or flake. Perhaps a sharp edge resulted. Certainly, flint and other hard stone possess sharp edges, but a blade-like cutting edge on a newly flaked piece of rock suggested some very interesting possibilities. Hobbyists enjoyed cutting and polishing gemstones and mounting them in prefabricated jewelry settings or in the metalwork of their own creation (silversmithing). Primarily, lapidary hobbyists enjoyed creating three types of stonework: cabochons, faceting, tumbling stones. In all fields of lapidary, you'll need to take large pieces of stone and turn them into useful, smaller-sized pieces. If you're in the field, you might be able to drop them off a precipice and retrieve the pieces at the bottom. This book will show you how to do lapidary with techniques and easy patterns to follow. You will find it interesting to make jewelry for yourself or even sell it as a souvenir. Buy this book now and you will be amazed by its elegance and nobleness.
Download or read book Gemstone Facet Cutting A Collection of Historical Articles on Methods and Equipment Used for Working Gems written by Various and published by Read Books Ltd. This book was released on 2016-08-26 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains classic material dating back to the 1900s and before. The content has been carefully selected for its interest and relevance to a modern audience. Carefully selecting the best articles from our collection we have compiled a series of historical and informative publications on the subjects of gemology and crystallography. The titles in this range include "Gemstone Manufacturing" "The Optical Properties of Gemstones and Crystals" "The Thirty-Two Classes of Crystal Symmetry" and many more. Each publication has been professionally curated and includes all details on the original source material. This particular instalment, "Gemstone Facet Cutting" contains information on the methods and equipment of the gem cutter. Intended to illustrate the main aspects of facet cutting it is a comprehensive guide for anyone wishing to obtain a general knowledge of the subject and to understand the field in its historical context. We are republishing these classic works in affordable, high quality, modern editions, using the original text and artwork.
Download or read book Lapidary Made Easy written by Adria Laverde and published by . This book was released on 2021-08-15 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gem cutting, or lapidary, most certainly got its start as an offshoot of mundane everyday activities. A stone may have fallen into a fire where the heat caused it to break or flake. Perhaps a sharp edge resulted. Certainly, flint and other hard stone possess sharp edges, but a blade-like cutting edge on a newly flaked piece of rock suggested some very interesting possibilities. Hobbyists enjoyed cutting and polishing gemstones and mounting them in prefabricated jewelry settings or in the metalwork of their own creation (silversmithing). Primarily, lapidary hobbyists enjoyed creating three types of stonework: cabochons, faceting, tumbling stones. In all fields of lapidary, you'll need to take large pieces of stone and turn them into useful, smaller-sized pieces. If you're in the field, you might be able to drop them off a precipice and retrieve the pieces at the bottom. This book will show you how to do lapidary with techniques and easy patterns to follow. You will find it interesting to make jewelry for yourself or even sell it as a souvenir. Buy this book now and you will be amazed by its elegance and nobleness.
Download or read book The Art of Gem Cutting written by Henry Carl Dake and published by . This book was released on 1945 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Jewelry Gem Cutting and Metalcraft written by William T. Baxter and published by Read Books Ltd. This book was released on 2012-12-03 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: This vintage book contains a complete and comprehensive guide to metal craft and jewellery making, with sections on gemstone-cutting and the proper identification of gem stones and gem minerals. Written in clear, plain language and full of and handy tips and invaluable information, this book is recommended for anyone with an interest in making jewellery, and it would make for a great addition to collections of allied literature. The chapters of this volume include: “Copper”, “Brass”, “Nickel Silver”, “Money Metal”, “Pewter”, “Soft-Soldering”, “Etching”, “Jeweller’s Saw and Frames and Blades”, “Paper Knives”, “Match Box Holders”, “Book Ends”, “Letter Holders”, “Desk Calendar”, “Tray Making”, “Making a Bowl”, etcetera. We are republishing this book now in an affordable, high quality edition - complete with a specially commissioned new introduction on gemmology.
Download or read book Gemstone Tumbling Cutting Drilling and Cabochon Making written by James Magnuson and published by . This book was released on 2018-07 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gemstones are naturally beautiful, but you can make them glisten and shine. This beginner's guide covers all the techniques you need to know: tumbling, cutting, face polishing and more. It pertains to a wide range of popular gemstones, from agates to turquoise, and it provides information about recommended equipment and supplies. Plus, it introduces jewelry making with seven projects. By following the authors' simple approach, you'll create finished stones worthy of displaying, selling or making into jewelry.
Download or read book The Art of the Lapidary written by Francis J. Sperisen and published by . This book was released on 1961 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discusses the properties and physical characteristics of precious and semi-precious stones, including directions for selecting, grinding, polishing, and carving stones.
Download or read book Cutting and Polishing Gemstones A Collection of Historical Articles on the Methods and Equipment Used for Working Gems written by Various and published by Read Books Ltd. This book was released on 2014-07-07 with total page 85 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains classic material dating back to the 1900s and before. The content has been carefully selected for its interest and relevance to a modern audience. Carefully selecting the best articles from our collection we have compiled a series of historical and informative publications on the subjects of gemology and crystallography. The titles in this range include "Gemstone Manufacturing" "The Optical Properties of Gemstones and Crystals" "The Thirty-Two Classes of Crystal Symmetry" and many more. Each publication has been professionally curated and includes all details on the original source material. This particular instalment, "Cutting and Polishing Gemstones" contains information on the methods and equipment of the gem cutter. Intended to illustrate the main aspects of cutting and polishing it is a comprehensive guide for anyone wishing to obtain a general knowledge of the subject and to understand the field in its historical context. We are republishing these classic works in affordable, high quality, modern editions, using the original text and artwork.
Download or read book Handbook for the Amateur Lapidary written by James Harry Howard and published by Ravenio Books. This book was released on 1935 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Man was cutting, carving and polishing gems long before he began to leave written records of his doings. Many Museums have countless examples of the lapidary work done by those artisans and artists, who wrought from raw materials, with exceedingly primitive equipment, objects of art that our modern workers would be hard taxed to surpass. Today, in the Far East, native artisans with hand or foot driven wheels are producing perfect polishes on difficult gems, showing workmanship of which we amateurs with full complement of tools may well be envious. Gem cutting is only one of many arts that are old. Ceramics, wood working, metal working and so forth are old arts. The thing that is peculiar is that these other arts all have their extensive literatures. One may go to any public library and find many volumes on any of these subjects except gem cutting. These volumes are all-revealing, authoritative and detailed. But the subject of gem cutting is shrouded in mystery. Few have written even in generalities on the subject. The Author, several years ago, conducted a search for such literature. He found absolutely nothing. Much later he learned of and borrowed, a copy of Oliver Byrnes, “Handbook for the Mechanic, Artisan and Engineer” and found in it an exceedingly interesting chapter on gem cutting. But the volume was written about 75 years ago, probably had a very limited circulation, was never reprinted, and not one library in fifty ever heard of it. That is the only volume the Author has ever found that treats even briefly of gem cutting. This excludes of course such texts as “The Gem Cutters Craft” by Leopold Cleremont which have chapters on the technique of cutting, but that treat of it so generally that they cannot be used as instructions. The art for some reason has always been passed down from generation to generation by apprenticeship only. When the Author began the above mentioned investigation he was told “The cutting of gems can be learned only through an apprenticeship.” There is no desire here to picture the art as an easy one to learn nor to minimize the skill that is shown by the work of the professional lapidaries, nor to intimate that the professional could, if he would, reveal all his secrets in one brief volume. The desire is to lift the cloud of mystery that has always surrounded the operation and show that actually there is nothing mysterious in the practices of the profession, but only certain basic rules, which, if obeyed, will bring definite results. It is hoped that the instructions herein given are sufficiently explicit that the beginner in the work will have no especial difficulties. It is hoped also that they are not so tedious but that they will be readable by those who do not propose to cut gems but who are, nevertheless, interested in the operation.