Download or read book Army Techniques Publication Atp 3 34 81 Mcwp 3 17 4 Engineer Reconnaissance Marc written by United States Government US Army and published by Createspace Independent Publishing Platform. This book was released on 2016-09-30 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Army Techniques Publication ATP 3-34.81 MCWP 3-17.4 Engineer Reconnaissance MARCH 2016 United States Government US Army provides techniques for the performance of tactical and technical engineer reconnaissance in support of military activities that are conducted across the full range of military operations. This publication supports doctrine found in ADP 3-0, FM 3-34, ADRP 5-0, and ADRP 6-0. This publication supersedes FM 3-34.170/MCWP 3-17.4. The engineer contribution to operational success is highly desired by the commander. Demands for engineer reconnaissance support will often exceed capabilities. These capabilities are spread thin, and they compete with the commander's needs for other engineer applications. The same engineer elements and capabilities are often required for each of these areas. Resolution of these competing priorities is one of the goals of the planning process. The staff-running estimate is created during mission analysis, and the engineer staff planner identifies the specified and implied engineer tasks (more than M/CM/S) and their associated purposes
Download or read book Army Techniques Publication 3 34 81 Mcwp 3 17 4 Engineer Reconnaissance March 2016 written by Us Army, United States Government and published by Createspace Independent Publishing Platform. This book was released on 2016-11-14 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: ATP 3-34.81 provides techniques for the performance of tactical and technical engineer reconnaissance in support of military activities that are conducted across the full range of military operations. This publication supports doctrine found in ADP 3-0, FM 3-34, ADRP 5-0, and ADRP 6-0. Although primarily oriented on the brigade combat team (BCT)/regimental combat team (RCT) based Marine air-ground task force (MAGTF) and below, the principal audience for ATP 3-34.81 is all members of the profession of arms. Commanders and staffs of Army and Marine Corps headquarters serving as joint task force or multinational headquarters should also refer to applicable joint or multinational doctrine concerning the range of military operations and joint or multinational forces. Trainers and educators throughout the Army and Marine Corps will also use this publication. The three engineer disciplines are combat (with the capabilities and activities of mobility, countermobility, and survivability [M/CM/S]), general, and geospatial engineering. These disciplines include significant reconnaissance capabilities. The three engineer disciplines include extensive discussion on integrating the planning for, and conduct of, engineer reconnaissance support within the tactical operations of the combined arms team. This publication discusses the capability resident within combat engineer units to form and employ engineer reconnaissance teams (ERTs). It also describes the capability resident within general engineer elements to form and employ ERTs, augment combat engineer ERTs, or provide assessment and survey teams. Finally, geospatial engineering enables reconnaissance and may play a large role, especially during the planning process. Engineer reconnaissance, like chemical, biological, radiological, and nuclear (CBRN) and other technical applications, is not a form of reconnaissance. Engineer reconnaissance is a focused application of special or unique capabilities supporting reconnaissance, and it is applicable to all forms of reconnaissance. The engineer disciplines provide reconnaissance capabilities that vary in linkages to warfighting functions, degrees of technical expertise, and effort applied to the assigned mission and tasks. Engineer reconnaissance is directly linked to geospatial intelligence because combat and general engineer units use technical measuring or survey devices to confirm, correct, or update the accuracy of available geospatial information. After analysis and comparison against other intelligence collections, this updated geospatial information becomes intelligence, which feeds the commander's decisionmaking process. Finally, this publication is written with the acknowledgement that the operational environment is more variable now. Engineers must be prepared to go into any operational environment and perform a full range of reconnaissance tasks in support of the maneuver commander while dealing with a wide range of threats and other influences. It builds on the collective knowledge and experience gained through nearly a dozen years of sustained military operations and exercises. It is rooted in time-tested principles and fundamentals, while accommodating new technologies and diverse threats to national security. This publication consists of five chapters and six appendixes that discuss the integration of engineer reconnaissance within the operational planning, execution, and assessment process that is presented in ADRP 5-0, ADRP 6-0, and MCWP 5-1.
Download or read book Engineer Reconnaissance written by Department of the Army and published by Createspace Independent Publishing Platform. This book was released on 2017-07-08 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: The three engineer disciplines are combat (with the capabilities and activities of mobility, countermobility, and survivability [M/CM/S]), general, and geospatial engineering. These disciplines include significant reconnaissance capabilities. The three engineer disciplines include extensive discussion on integrating the planning for, and conduct of, engineer reconnaissance support within the tactical operations of the combined arms team. This publication discusses the capability resident within combat engineer units to form and employ engineer reconnaissance teams (ERTs). It also describes the capability resident within general engineer elements to form and employ ERTs, augment combat engineer ERTs, or provide assessment and survey teams. Finally, geospatial engineering enables reconnaissance and may play a large role, especially during the planning process. Engineer reconnaissance, like chemical, biological, radiological, and nuclear (CBRN) and other technical applications, is not a form of reconnaissance. Engineer reconnaissance is a focused application of special or unique capabilities supporting reconnaissance, and it is applicable to all forms of reconnaissance. The engineer disciplines provide reconnaissance capabilities that vary in linkages to warfighting functions, degrees of technical expertise, and effort applied to the assigned mission and tasks. Engineer reconnaissance is directly linked to geospatial intelligence because combat and general engineer units use technical measuring or survey devices to confirm, correct, or update the accuracy of available geospatial information. After analysis and comparison against other intelligence collections, this updated geospatial information becomes intelligence, which feeds the commander's decisionmaking process. The engineer contribution to operational success is highly desired by the commander. Demands for engineer reconnaissance support will often exceed capabilities. These capabilities are spread thin, and they compete with the commander's needs for other engineer applications. The same engineer elements and capabilities are often required for each of these areas. Resolution of these competing priorities is one of the goals of the planning process. The staff-running estimate is created during mission analysis, and the engineer staff planner identifies the specified and implied engineer tasks (more than M/CM/S) and their associated purposes. This results in the recommendation of essential tasks for M/CM/S to the supported commander. Finally, this publication is written with the acknowledgement that the operational environment is more variable now. Engineers must be prepared to go into any operational environment and perform a full range of reconnaissance tasks in support of the maneuver commander while dealing with a wide range of threats and other influences. It builds on the collective knowledge and experience gained through nearly a dozen years of sustained military operations and exercises. It is rooted in time-tested principles and fundamentals, while accommodating new technologies and diverse threats to national security.
Download or read book Engineer Reconnaissance FM 3 34 170 5 170 MCWP 3 17 4 written by Department Army and published by CreateSpace. This book was released on 2012-11-30 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Doctrine provides a military organization with unity of effort and a common philosophy, language, and purpose. This field manual provides doctrine for the application of engineer reconnaissance capabilities in support of the combined arms team conducting full spectrum operations. Engineer reconnaissance, like chemical, biological, radiological, and nuclear (CBRN) and other technical applications, is not a form of reconnaissance (see chapter 3 for a discussion of the four forms of reconnaissance). Engineer reconnaissance is instead a focused application of special/unique capabilities supporting reconnaissance operations and is applicable over/pertinent to all four forms of reconnaissance. Field manual (FM) 3-34.170/Marine Corps Warfighting Publication (MCWP) 3-17.4 updates the FM that provides doctrinal guidance for engineer reconnaissance in support of full spectrum operations, including engineer reconnaissance in support of tactical operations as well as engineer technical reconnaissance support. This manual supersedes FM 5-170 and supports the doctrine found in FM 3-0, FM 3-34, and FM 6-0, and Field Manual Interim (FMI) 5-0.1. This manual will serve as a reference document for engineer commanders and staff, leaders, training developers, and doctrine developers throughout the Army and Marine Corps. It will also provide guidance to commanders for the employment of engineer reconnaissance capabilities in support of all operations. It is also the primary reference for engineer reconnaissance for Joint Publication (JP) 3-34. The target audience for this manual is focused at the brigade and below maneuver commander and supporting staff. This also includes nonorganic unit commanders and staffs that will support brigade and below maneuver organizations. Additionally, it is pertinent to other commanders and staffs at all echelons. This doctrine will assist branch schools in teaching the integration of engineer capabilities. Engineer involvement is a virtual certainty for nearly every military operation. FM 3-34.170 is intended to inform all Service components of the types of engineer reconnaissance tasks and the variety of capabilities available to perform them.
Download or read book Field Manual FM 3 34 170 MCWP 3 17 4 FM 5 170 Engineer Reconnaissance March 2008 written by United States Government US Army and published by Createspace Independent Pub. This book was released on 2012-08-06 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Doctrine provides a military organization with unity of effort and a common philosophy, language, and purpose. This field manual provides doctrine for the application of engineer reconnaissance capabilities in support of the combined arms team conducting full spectrum operations. Engineer reconnaissance, like chemical, biological, radiological, and nuclear (CBRN) and other technical applications, is not a form of reconnaissance (see chapter 3 for a discussion of the four forms of reconnaissance). Engineer reconnaissance is instead a focused application of special/unique capabilities supporting reconnaissance operations and is applicable over/pertinent to all four forms of reconnaissance. Field manual (FM) 3-34.170/Marine Corps Warfighting Publication (MCWP) 3-17.4 updates the FM that provides doctrinal guidance for engineer reconnaissance in support of full spectrum operations, including engineer reconnaissance in support of tactical operations as well as engineer technical reconnaissance support. This manual supersedes FM 5-170 and supports the doctrine found in FM 3-0, FM 3-34, and FM 6-0, and Field Manual Interim (FMI) 5-0.1. This manual will serve as a reference document for engineer commanders and staff, leaders, training developers, and doctrine developers throughout the Army and Marine Corps. It will also provide guidance to commanders for the employment of engineer reconnaissance capabilities in support of all operations. It is also the primary reference for engineer reconnaissance for Joint Publication (JP) 3-34. This FM has an introduction and six chapters. It includes significant discussion on integrating the planning for engineer reconnaissance support within the planning doctrine in FM 5-0 and the command and control (C2) doctrine in FM 6-0. The introduction expands upon the manual's purpose and summarizes the doctrinal changes it contains. Chapter 1 provides a doctrinal framework for the provision of engineer reconnaissance capabilities resident within engineer functions and supporting the warfighting functions, describes a range of tactical to technical engineer reconnaissance capabilities, and provides capabilities and limitations of the engineer reconnaissance team (ERT). Chapter 2 provides doctrine for integrating the planning for engineer reconnaissance within information management and planning processes of the combined arms team. It specifically addresses integration of geospatial support and provides specific C2 considerations for integration of engineer reconnaissance. Chapter 3 provides doctrine for integrating the application of engineer reconnaissance within tactical reconnaissance operations of the combined arms team. It also addresses considerations for the sustainment of engineer reconnaissance elements. Chapter 4 provides doctrine for the conduct of ERT operations providing engineer reconnaissance support at the tactical end of the range described in Chapter 1. ERTs conduct zone, area, and route reconnaissance with a specified additional focus on required technical information. Chapters 5 and 6 provide doctrine for the conduct of engineer assessments and surveys which provide engineer reconnaissance support at the technical end of the range described in Chapter 1. Assessment and survey teams conduct reconnaissance specifically focused on collecting detailed technical information. Appendix B illustrates the preparation of required engineer reconnaissance reports and forms. Appendix C incorporates the smartcard tools developed for infrastructure assessment. Appendix D provides the environmental baseline assessment tool. Appendix H includes a collection of other useful tools and resources.
Download or read book Engineer Reconnaissance Atp 3 34 81 McWp 3 17 4 written by Department Of The Army and published by Lulu.com. This book was released on 2018-08-09 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: The three engineer disciplines are combat (with the capabilities and activities of mobility, countermobility, and survivability [M/CM/S]), general, and geospatial engineering. These disciplines include significant reconnaissance capabilities. The three engineer disciplines include extensive discussion on integrating the planning for, and conduct of, engineer reconnaissance support within the tactical operations of the combined arms team. This publication discusses the capability resident within combat engineer units to form and employ engineer reconnaissance teams (ERTs). It also describes the capability resident within general engineer elements to form and employ ERTs, augment combat engineer ERTs, or provide assessment and survey teams. Finally, geospatial engineering enables reconnaissance and may play a large role, especially during the planning process. Engineer reconnaissance, like chemical, biological, radiological, and nuclear (CBRN) and other technical applications, is not a form of reconnaissance.
- Author : United States Government Us Army
- Publisher :
- Release : 2021-04-15
- ISBN :
- Pages : 134 pages
Army Techniques Publication ATP 3 34 22 Engineer Operations Brigade Combat Team and Below April 2021
Download or read book Army Techniques Publication ATP 3 34 22 Engineer Operations Brigade Combat Team and Below April 2021 written by United States Government Us Army and published by . This book was released on 2021-04-15 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: This United States Army field manual, Army Techniques Publication ATP 3-34.22 Engineer Operations - Brigade Combat Team and Below April 2021, provides a doctrinal foundation for the conduct of engineer operations in support of unified land operations, focused on tactical maneuvers at the brigade combat team (BCT) level and below. The engineer organizations organic to the BCT are optimized to perform combat engineering tasks (primarily mobility with limited capabilities in countermobility and survivability), with geospatial engineering teamsproviding organic capability. Additional engineering support (combat and general) comes from engineer organizations that are task-organized to the BCT or that provide support from echelons above brigade (EAB) organizations. This manual is aligned with current BCT doctrine (see FM 3-96) and describes engineer support for the armored brigade combat team (ABCT), infantry brigade combat team (IBCT), and Stryker brigade combat team (SBCT). Although the security force assistance BCT and its respective engineer battalions are not addressed in detail, the basic principles of this manual also apply to those organizations. The principal audience for ATP 3-34.22 consists of commanders, officers, noncommissioned officers (NCOs), and staff at the BCT level and below as well as EAB units that support BCTs. ATP 3-34.22 is a primary manual for instructional purposes within the United States Army Engineer School and assists other Army branch schools in teaching the integration of engineer capabilities into Army operations. ATP 3-34.22 applies to the Active Army, Army National Guard/Army National Guard of the United States and United States Army Reserve unless otherwise stated.
Download or read book Army Techniques Publication Atp 3 34 80 Geospatial Engineering February 2017 written by United States Government US Army and published by Createspace Independent Publishing Platform. This book was released on 2017-03-24 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: Army Techniques Publication ATP 3-34.80 Geospatial Engineering February 2017 The geospatial engineering discipline is one of three engineering disciplines. It plays a major role in supporting the combat and general engineering disciplines. This discipline is essential to all lines of engineering support (assure mobility, enhance protection, enable force projection and logistics, and build partner capacity and develop infrastructure). Geospatial engineering is an art and a science that pertains to the generation, management, analysis, and dissemination of geospatial information that is accurately referenced to a precise location on the earth and is used in offense, defense, stability, or defense support of civil authorities tasks. These tasks provide mission-tailored data, tactical decision aids, and visualization products that enable the commander and staff to visualize the operational environment. Geospatial engineers aid in the analysis of physical and cultural mapping and other activities that significantly contribute to anticipating, estimating, and warning of possible future events. Providing geospatial information that is timely, accurate, and relevant is a critical enabler throughout the operations process for developing shared situational awareness, improving the understanding of capabilities and limitations for friendly forces and the adversary, and highlighting other conditions of the operational environment that are required for mission command. Today, geospatial engineering leverages finer temporal, spatial, and spectral resolutions from additional sensors and platforms that allow increased volumes and more complex data. New methods and technologies provide additional utility and capability and the ability to work effectively and efficiently within a broad pool of partners and allies. In addition to mastering their respective areas of expertise, engineer staff officers and other staff members must possess a thorough understanding of geospatial engineering to tailor geospatial information to support the mission command warfighting function. Advancements in technology and access to an abundance of information can quickly lead to information overload. Planners must be able to analyze the situation through the mission and operational variables, grasp the military significance of the challenges and opportunities presented, and manage information to enable situational understanding to support decision making. This manual describes the application of geospatial engineering in support of Army forces conducting unified land operations. It also acknowledges that Army doctrine remains dynamic-balancing current capabilities and situations with projected requirements for future operations. As geospatial engineering capabilities continue to improve through organizational changes, technological advancements, and emerging best practices, leaders and planners at all levels will be charged to leverage those improvements and adapt the processes and procedures that are described in this manual to meet the demands of, and provide the most effective geospatial support possible to, the commander.
Download or read book Army Techniques Publication Atp 3 34 23 Engineer Operations Echelons Above Brigade Combat Team June 2015 written by United States Government US Army and published by CreateSpace. This book was released on 2015-06-16 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication, Army Techniques Publication ATP 3-34.23 Engineer Operations - Echelons Above Brigade Combat Team June 2015, describes engineer operations at echelons above brigade (EAB) combat team level. It is the doctrinal manual for engineer support to division, corps, and theater Army echelons. This manual is an extension of FM 3-34 and is linked to joint and Army doctrine to ensure that it is useful for operational commanders and staffs. This manual serves as a guide for the application of engineer combat power and the employment of engineer forces in support of decisive action primarily at higher echelons and within a joint framework. The principal audience for ATP 3-34.23 is engineer commanders and trainers at higher echelons. This manual forms the foundation for the engineer curriculum contained in the engineer portions of the Army Education System. The information contained in this manual will assist multinational forces and other Services and branches of the Army in planning and integrating engineer capabilities. This manual will also assist Army branch schools in teaching the integration of engineer capabilities into Army and joint operations. This manual describes the engineer operations integrated through the warfighting functions in a combined arms application of combat power. It describes the engineer capabilities available to commanders and provides information for force-tailoring these capabilities at higher echelons to ensure synchronization throughout the operations process and across the range of military operations. It discusses the foundation of engineer operations to ensure integration at each echelon and develops considerations for engineer operations within the operations process, tailored organization, range of military operations, and headquarters configuration unique to the division, corps, and theater Army echelons. This manual emphasizes the simultaneous combination of offensive, defensive, and stability or defense support of civil authorities (DSCA) tasks. It describes engineer support to Army forces conducting decisive action within the framework of joint operations. It also addresses the engineer roles and functions with unified action partners (potentially under multinational or interagency leadership) and within diverse command relationships. The manual is organized into 5 chapters and 3 appendixes that provide additional details on selected operational topics. A brief description of each chapter is below: Chapter 1 describes the engineer view of the operational environment as it pertains to operations at EAB combat team. It describes the forces and capabilities available (including unified action partners) and addresses the tailoring of engineer force pool capabilities in support of engineer operations. Chapter 2 lays the foundation for engineer operations at EAB. It focuses on integration at each echelon and throughout the operations process. It discusses the engineer staff by echelon, capabilities within the engineer disciplines, and synchronized application of these capabilities through the warfighting functions. Chapter 3 describes engineer operations at the theater echelon. It discusses integration into the theater Army design methods, force-tailoring considerations at the theater echelon, and engineer support in each of the operational configurations described for a theater Army headquarters. Chapter 4 describes engineer operations at the corps echelon. It discusses integration into the corps operations processes, force-tailoring considerations, decisive action at the corps echelon, and engineer support in each of the operational configurations described for a corps headquarters. Chapter 5 describes engineer operations at the division echelon. It discusses integration into division operations processes, force-tailoring considerations, decisive action at the division echelon, and engineer support in each of the operational configurations described for a division headquarters.
Download or read book Army Techniques Publication Atp 3 34 22 Engineer Operations brigade Combat Team and Below December 2014 written by United States Government US Army and published by Createspace Independent Publishing Platform. This book was released on 2016-10-01 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual, Army Techniques Publication ATP 3-34.22 ENGINEER OPERATIONS-BRIGADE COMBAT TEAM AND BELOW December 2014, provides a doctrinal foundation for the conduct of engineer operations in support of unified land operations that are focused on tactical maneuvers at the brigade combat team (BCT) level and below. The engineer support doctrine for the BCT is focused on tactical-level maneuvers. The engineer organizations that are organic to the BCT are optimized to perform combat engineering tasks (primarily mobility with limited capabilities in countermobility and survivability). Geospatial engineering support is provided by organic terrain teams. Additional engineering support (combat and general) comes from engineer organizations that are task-organized to the BCT or that provide support from echelons above brigade (EAB) organizations. This manual is aligned with current BCT doctrine and describes engineer support for the armored BCT, infantry BCT, and Stryker BCT. (See FM 3-90.6.) Although the armored cavalry regiment and engineer company are not specifically addressed, the basic principles of this manual also apply to those organizations.
Download or read book FM 3 34 Engineer Operations written by U S Army and published by . This book was released on 2021-02-17 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: FM 3-34 is the Army doctrinal publication that contains the capstone doctrinal guidance for U.S. Army engineers. FM 3-34 demonstrates how engineers contribute to decisive action and provides a common framework and language for engineer support to operations. It also constitutes the doctrinal foundation for developing other fundamentals and tactics, techniques, and procedures detailed in subordinate engineer publications. This manual is the integrating publication that nests engineer doctrine with Army capstone doctrine and joint doctrine. It focuses on synchronizing and coordinating the diverse range of capabilities in the Engineer Regiment to support the Army and its mission successfully. FM 3-34 provides operational guidance for engineer commanders and trainers at all echelons and forms the foundation for the United StatesArmy Engineer School (USAES) curricula.
Download or read book Engineer Operations FM 3 34 written by Headquarters Department of the Army and published by . This book was released on 2019-08-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: FM 3-34 is the Army doctrine publication that presents the overarching doctrinal guidance and direction for conducting engineer activities and shows how it contributes to decisive action. It provides a common framework and language for engineer support to operations and constitutes the doctrinal foundation for developing other fundamentals and tactics, techniques, and procedures detailed in subordinate doctrine manuals. This manual is a key integrating publication that links the doctrine for the Engineer Regiment with Army capstone doctrine and joint doctrine. It focuses on synchronizing and coordinating the diverse range of capabilities in the Engineer Regiment to support the Army and its mission successfully. FM 3-34 provides operational guidance for engineer commanders and trainers at all echelons and forms the foundation for United States (U.S.) Army Engineer School curricula.
Download or read book Army Tactics Techniques and Procedures Attp 3 34 23 FM 5 71 100 5 100 15 5 116 Engineer Operations Echelons Above Brigade Combat Team July 2010 written by United States Government US Army and published by CreateSpace. This book was released on 2013-04-19 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Army Tactics, Techniques, and Procedures (ATTP) 3-34.23 describes engineer operations at echelons above brigade (EAB) combat team level. It is the engineer doctrinal manual for engineer support to division, corps, and theater army echelons. The manual is an extension of Field Manual (FM) 3-34, and is linked to joint and Army doctrine to ensure its usefulness for operational-level commanders and staff. This manual serves as a guide for the application of engineer combat power and employment of engineer forces in support of full spectrum operations primarily at higher echelons and within a joint framework.ATTP 3-34.23 consolidates doctrine previously published in three separate manuals: FM 5-71-100, FM 5-100-15, and FM 5-116. The consolidated doctrine has been updated and revised to align with revisions to FM 3-34 and other Army and joint doctrine. The manual is organized into seven chapters plus numerous appendixes to provide additional details on selected operational topics. The first three chapters follow the flow of FM 3-34 and generally describe engineer operations at higher echelons. The next three chapters focus on operations at each of the higher echelons and operational configurations. The final chapter discusses sustainment support to the engineer forces operating at these echelons. A brief description of each of the chapters is provided below:* Chapter 1 describes the engineer view of the operational environment (OE) as it pertains to operations at echelons above BCT. It discusses the challenges and opportunities that translate to requirements for engineer capabilities and combat power. It describes the forces and capabilities available including joint, interagency, and multinational forces. It concludes with a discussion of categorizing capabilities within the engineer functions and synchronizing their application through the warfighting functions.* Chapter 2 discusses implications of the modular force organization for operations at higher echelons. It includes a discussion of the modular engineer force implications and the implications of the modular force headquarters at each higher echelon. It also addresses tailoring engineer force pool capabilities in support of engineer operations.* Chapter 3 lays the foundations for engineer operations at EAB. It focuses on integration at each echelon and throughout the entire operations process. It includes a discussion of the engineer coordinator (ENCOORD). It also describes command and support relationships as the critical linkage for engineer integration throughout the force.* Chapter 4 describes engineer operations at the theater echelon. It includes a discussion on integration in theater operational design, force-tailoring considerations, and operational themes at this echelon. It also includes a focused discussion on engineer support in each of the operational configurations described for a theater army headquarters.* Chapter 5 describes engineer operations at the corps echelon. It includes a discussion on integration in corps operations processes, force-tailoring considerations, and full spectrum operations at this echelon. It also includes a focused discussion on engineer support in each of the operational configurations described for a corps headquarters.* Chapter 6 describes engineer operations at the division echelon. It includes a discussion on integration in division operations processes, force-tailoring considerations, and full spectrum operations at this echelon. It also includes a focused discussion on engineer support in each of the operational configurations described for a division headquarters.* Chapter 7 discusses sustainment of engineer capabilities. Successful engineer operations include effective incorporation of sustainment support. This chapter describes the integrated sustainment effort required to support engineer operations.
Download or read book Engineer Operations Echelons Above Brigade Combat Team ATTP 3 34 23 written by Department of the Army and published by Createspace Independent Pub. This book was released on 2012-12-02 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Army Tactics, Techniques, and Procedures (ATTP) 3-34.23, “Engineer Operations – Echelons Above Brigade Combat Team,” describes engineer operations at echelons above brigade (EAB) combat team level. It is the engineer doctrinal manual for engineer support to division, corps, and theater army echelons. The manual is an extension of Field Manual (FM) 3-34, and is linked to joint and Army doctrine to ensure its usefulness for operational-level commanders and staff. This manual serves as a guide for the application of engineer combat power and employment of engineer forces in support of full spectrum operations primarily at higher echelons and within a joint framework. ATTP 3-34.23 consolidates doctrine previously published in three separate manuals: FM 5-71-100, FM 5-100-15, and FM 5-116. The consolidated doctrine has been updated and revised to align with revisions to FM 3-34 and other Army and joint doctrine. ATTP 3-34.23 provides operational guidance for engineer commanders and trainers at all higher echelons and forms the foundation for established curriculum within the engineer portions of the Army's education system. Information contained in this manual will assist multinational forces and other Services and branches of the Army to plan and integrate engineer capabilities. This doctrine also will assist Army branch schools in teaching the integration of engineer capabilities into Army and joint operations.
Download or read book Engineer Operations written by Department of the Army and published by . This book was released on 2009-04-02 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Field Manual (FM) 3-34 describes the Engineer Regiment's keystone operational doctrine. The manual is linked to joint and Army doctrine to ensure its usefulness for all joint and Army-level commanders and staff. All other engineer FMs (see Appendix A) are based on the foundations described in this manual and are synchronized with their respective joint publications. The foundations of engineer operations are based on the successful employment of engineers, past and present. This manual describes engineer support to Army forces conducting full spectrum operations within the framework of joint operations. As in FM 3-0, this version of FM 3-34 increases the emphasis on simultaneous offensive, defensive, and stability or civil support operations. This manual has been revised to align with revisions to FM 3-0 and other Army and joint doctrine. A series of conferences at the United States Army Engineer School (USAES) convened to guide the changes in this version of FM 3-34. This revision has been driven by major changes to Army and joint doctrine, including the- * Revision of the Army's capstone manual, FM 3-0. * Revision of Joint Publication (JP) 3-34. * Lessons learned from experience fighting the War on Terrorism. * Conversion of the Army to a brigade combat team (BCT)-based modular force that is joint and expeditionary. * Conversion of the Engineer Regiment to the modular engineer force. * Change from maintaining readiness within the "band of excellence" to achieving readiness through the force pool progression dictated by the Army Force Generation (ARFORGEN) Model. FM 3-34 provides operational guidance for engineer commanders and trainers at all echelons and forms the foundation for established curriculum within the engineer portions of the Army's education system. Information contained in this manual will assist multinational forces and other Services and branches of the Army to plan and integrate engineer capabilities. This doctrine also will assist Army branch schools in teaching the integration of engineer capabilities into Army and joint operations. Terms that have joint or Army definitions are identified in both the glossary and the text. Glossary terms: The glossary lists most terms used in FM 3-34 that have joint or Army definitions. Terms with an asterisk in the glossary indicate that this FM is the proponent FM (the authority). Text references: Definitions printed in boldface in the text indicate that this FM is the proponent FM. These terms and their definitions will be incorporated into the next revision of FM 1-02. For other definitions in the text, the term is italicized, and the number of the proponent FM follows the definition.
Download or read book FM 5 170 Engineer Reconnaissance written by U S Army and published by . This book was released on 2021-04-25 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Field Manual (FM) 5-170 describes how engineer recon teams support and augment a maneuver battalion or brigade's recon effort. It is designed as an engineer extension of FMs 17-95 and 17-98. This manual serves as a guide for both brigade and task force (TF) engineers, as well as for subordinate leaders (especially recon team leaders) in planning, integrating, and conducting recon operations. It also serves as a guide for the brigade and TF staffs and subordinate maneuver commanders on the organization, capabilities, and employment of engineer recon teams.
Download or read book Fm 5 34 Engineer Field Data written by Headquarters Department of The Army and published by Createspace Independent Publishing Platform. This book was released on 2017-10-09 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineer Field Data is designed as an authoritative reference for the military engineer. It covers everything from concreting to improvised munitions!