Download or read book Architecture and CAD for Deep Submicron FPGAS written by Vaughn Betz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since their introduction in 1984, Field-Programmable Gate Arrays (FPGAs) have become one of the most popular implementation media for digital circuits and have grown into a $2 billion per year industry. As process geometries have shrunk into the deep-submicron region, the logic capacity of FPGAs has greatly increased, making FPGAs a viable implementation alternative for larger and larger designs. To make the best use of these new deep-submicron processes, one must re-design one's FPGAs and Computer- Aided Design (CAD) tools. Architecture and CAD for Deep-Submicron FPGAs addresses several key issues in the design of high-performance FPGA architectures and CAD tools, with particular emphasis on issues that are important for FPGAs implemented in deep-submicron processes. Three factors combine to determine the performance of an FPGA: the quality of the CAD tools used to map circuits into the FPGA, the quality of the FPGA architecture, and the electrical (i.e. transistor-level) design of the FPGA. Architecture and CAD for Deep-Submicron FPGAs examines all three of these issues in concert. In order to investigate the quality of different FPGA architectures, one needs CAD tools capable of automatically implementing circuits in each FPGA architecture of interest. Once a circuit has been implemented in an FPGA architecture, one next needs accurate area and delay models to evaluate the quality (speed achieved, area required) of the circuit implementation in the FPGA architecture under test. This book therefore has three major foci: the development of a high-quality and highly flexible CAD infrastructure, the creation of accurate area and delay models for FPGAs, and the study of several important FPGA architectural issues. Architecture and CAD for Deep-Submicron FPGAs is an essential reference for researchers, professionals and students interested in FPGAs.

Download or read book Low Energy FPGAs Architecture and Design written by Varghese George and published by Springer Science & Business Media. This book was released on 2001-06-30 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low-Energy FPGAs: Architecture and Design is a primary resource for both researchers and practicing engineers in the field of digital circuit design. The book addresses the energy consumption of Field-Programmable Gate Arrays (FPGAs). FPGAs are becoming popular as embedded components in computing platforms. The programmability of the FPGA can be used to customize implementations of functions on an application basis. This leads to performance gains, and enables reuse of expensive silicon. Chapter 1 provides an overview of digital circuit design and FPGAs. Chapter 2 looks at the implication of deep-submicron technology onFPGA power dissipation. Chapter 3 describes the exploration environment to guide and evaluate design decisions. Chapter 4 discusses the architectural optimization process to evaluate the trade-offs between the flexibility of the architecture, and the effect on the performance metrics. Chapter 5 reviews different circuit techniques to reduce the performance overhead of some of the dominant components. Chapter 6 shows methods to configure FPGAs to minimize the programming overhead. Chapter 7 addresses the physical realization of some of the critical components and the final implementation of a specific low-energy FPGA. Chapter 8 compares the prototype array to an equivalent commercial architecture.

Download or read book Principles and Structures of FPGAs written by Hideharu Amano and published by Springer. This book was released on 2018-09-03 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive textbook on the field programmable gate array (FPGA) covers its history, fundamental knowledge, architectures, device technologies, computer-aided design technologies, design tools, examples of application, and future trends. Programmable logic devices represented by FPGAs have been rapidly developed in recent years and have become key electronic devices used in most IT products. This book provides both complete introductions suitable for students and beginners, and high-level techniques useful for engineers and researchers in this field. Differently developed from usual integrated circuits, the FPGA has unique structures, design methodologies, and application techniques. Allowing programming by users, the device can dramatically reduce the rising cost of development in advanced semiconductor chips. The FPGA is now driving the most advanced semiconductor processes and is an all-in-one platform combining memory, CPUs, and various peripheral interfaces. This book introduces the FPGA from various aspects for readers of different levels. Novice learners can acquire a fundamental knowledge of the FPGA, including its history, from Chapter 1; the first half of Chapter 2; and Chapter 4. Professionals who are already familiar with the device will gain a deeper understanding of the structures and design methodologies from Chapters 3 and 5. Chapters 6–8 also provide advanced techniques and cutting-edge applications and trends useful for professionals. Although the first parts are mainly suitable for students, the advanced sections of the book will be valuable for professionals in acquiring an in-depth understanding of the FPGA to maximize the performance of the device.

Download or read book FPGA Architecture written by Ian Kuon and published by Now Publishers Inc. This book was released on 2008 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews the historical development of programmable logic devices, the fundamental programming technologies that the programmability is built on, and then describes the basic understandings gleaned from research on architectures. It is an invaluable reference for engineers and computer scientists.

Download or read book Nanotechnology written by Rainer Waser and published by John Wiley & Sons. This book was released on 2008-07-21 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second of two volumes on applications in information technology is divided into two main sections. The first covers logic devices and concepts, ranging from advanced and non-conventional CMOS and semiconductor nanowire devices, via various spin-controlled logic devices and concepts involving carbon nanotubes, organic thin films, as well as single organic molecules, right up to the visionary idea of intramolecular computation. The second part, architectures and computational concepts, discusses biologically inspired structures and quantum cellular automata, finishing off by summarizing the main principles and current approaches to coherent solid-state-based quantum computation.

Download or read book Design of Interconnection Networks for Programmable Logic written by Guy Lemieux and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: Programmable Logic Devices (PLDs) have become the key implementation medium for the vast majority of digital circuits designed today. While the highest-volume devices are still built with full-fabrication rather than field programmability, the trend towards ever fewer ASICs and more FPGAs is clear. This makes the field of PLD architecture ever more important, as there is stronger demand for faster, smaller, cheaper and lower-power programmable logic. PLDs are 90% routing and 10% logic. This book focuses on that 90% that is the programmable routing: the manner in which the programmable wires are connected and the circuit design of the programmable switches themselves. Anyone seeking to understand the design of an FPGA needs to become lit erate in the complexities of programmable routing architecture. This book builds on the state-of-the-art of programmable interconnect by providing new methods of investigating and measuring interconnect structures, as well as new programmable switch basic circuits. The early portion of this book provides an excellent survey of interconnec tion structures and circuits as they exist today. Lemieux and Lewis then provide a new way to design sparse crossbars as they are used in PLDs, and show that the method works with an empirical validation. This is one of a few routing architecture works that employ analytical methods to deal with the routing archi tecture design. The analysis permits interesting insights not typically possible with the standard empirical approach.

Download or read book Quantifying and Exploring the Gap Between FPGAs and ASICs written by Ian Kuon and published by Springer Science & Business Media. This book was released on 2010-07-03 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Field-programmable gate arrays (FPGAs), which are pre-fabricated, programmable digital integrated circuits (ICs), provide easy access to state-of-the-art integrated circuit process technology, and in doing so, democratize this technology of our time. This book is about comparing the qualities of FPGA – their speed performance, area and power consumption, against custom-fabricated ICs, and exploring ways of mitigating their de ciencies. This work began as a question that many have asked, and few had the resources to answer – how much worse is an FPGA compared to a custom-designed chip? As we dealt with that question, we found that it was far more dif cult to answer than we anticipated, but that the results were rich basic insights on fundamental understandings of FPGA architecture. It also encouraged us to nd ways to leverage those insights to seek ways to make FPGA technology better, which is what the second half of the book is about. While the question “How much worse is an FPGA than an ASIC?” has been a constant sub-theme of all research on FPGAs, it was posed most directly, some time around May 2004, by Professor Abbas El Gamal from Stanford University to us – he was working on a 3D FPGA, and was wondering if any real measurements had been made in this kind of comparison. Shortly thereafter we took it up and tried to answer in a serious way.

Download or read book Nanoelectronic Circuit Design written by Niraj K. Jha and published by Springer Science & Business Media. This book was released on 2010-12-21 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is about large-scale electronic circuits design driven by nanotechnology, where nanotechnology is broadly defined as building circuits using nanoscale devices that are either implemented with nanomaterials (e.g., nanotubes or nanowires) or following an unconventional method (e.g., FinFET or III/V compound-based devices). These nanoscale devices have significant potential to revolutionize the fabrication and integration of electronic systems and scale beyond the perceived scaling limitations of traditional CMOS. While innovations in nanotechnology originate at the individual device level, realizing the true impact of electronic systems demands that these device-level capabilities be translated into system-level benefits. This is the first book to focus on nanoscale circuits and their design issues, bridging the existing gap between nanodevice research and nanosystem design.

Download or read book Field Programmable Logic and Applications written by Gordon Brebner and published by Springer. This book was released on 2003-05-15 with total page 681 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 11th International Conference on Field-Programmable Logic and Application, FPL 2001, held in Belfast, Northern Ireland, UK, in August 2001. The 56 revised full papers and 15 short papers presented were carefully reviewed and selected from a total of 117 submissions. The book offers topical sections on architectural framework, place and route, architecture, DSP, synthesis, encryption, runtime reconfiguration, graphics and vision, networking, processor interaction, applications, methodology, loops and systolic, image processing, faults, and arithmetic.

Download or read book Language driven Exploration and Implementation of Partially Re configurable ASIPs written by Anupam Chattopadhyay and published by Springer Science & Business Media. This book was released on 2008-12-02 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increasing complexity of modern embedded systems demands system designers to ramp up their design productivity without compromising performance goals. This is promoted by modern Electronic System Level (ESL) techniques. Language-driven Exploration and Implementation of Partially Re-configurable ASIPs addresses an important segment of the ESL area by modeling partially re-configurable processors via high-level Architecture Description Language (ADL). This approach also hints an imminent evolution in the area of re-configurable system design.

Download or read book Reconfigurable Computing written by Scott Hauck and published by Elsevier. This book was released on 2010-07-26 with total page 945 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reconfigurable Computing marks a revolutionary and hot topic that bridges the gap between the separate worlds of hardware and software design— the key feature of reconfigurable computing is its groundbreaking ability to perform computations in hardware to increase performance while retaining the flexibility of a software solution. Reconfigurable computers serve as affordable, fast, and accurate tools for developing designs ranging from single chip architectures to multi-chip and embedded systems. Scott Hauck and Andre DeHon have assembled a group of the key experts in the fields of both hardware and software computing to provide an introduction to the entire range of issues relating to reconfigurable computing. FPGAs (field programmable gate arrays) act as the "computing vehicles to implement this powerful technology. Readers will be guided into adopting a completely new way of handling existing design concerns and be able to make use of the vast opportunities possible with reconfigurable logic in this rapidly evolving field. - Designed for both hardware and software programmers - Views of reconfigurable programming beyond standard programming languages - Broad set of case studies demonstrating how to use FPGAs in novel and efficient ways

Download or read book System on Chip written by Bashir M. Al-Hashimi and published by IET. This book was released on 2006-01-31 with total page 940 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights both the key achievements of electronic systems design targeting SoC implementation style, and the future challenges presented by the continuing scaling of CMOS technology.

Download or read book Disruptive Logic Architectures and Technologies written by Pierre-Emmanuel Gaillardon and published by Springer Science & Business Media. This book was released on 2012-04-24 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the opportunities offered by disruptive technologies to overcome the economical and physical limits currently faced by the electronics industry. It provides a new methodology for the fast evaluation of an emerging technology from an architectural prospective and discusses the implications from simple circuits to complex architectures. Several technologies are discussed, ranging from 3-D integration of devices (Phase Change Memories, Monolithic 3-D, Vertical NanoWires-based transistors) to dense 2-D arrangements (Double-Gate Carbon Nanotubes, Sublithographic Nanowires, Lithographic Crossbar arrangements). Novel architectural organizations, as well as the associated tools, are presented in order to explore this freshly opened design space.

Download or read book System on Chip for Real Time Applications written by Wael Badawy and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: System-on-Chip for Real-Time Applications will be of interest to engineers, both in industry and academia, working in the area of SoC VLSI design and application. It will also be useful to graduate and undergraduate students in electrical and computer engineering and computer science. A selected set of papers from the 2nd International Workshop on Real-Time Applications were used to form the basis of this book. It is organized into the following chapters: -Introduction; -Design Reuse; -Modeling; -Architecture; -Design Techniques; -Memory; -Circuits; -Low Power; -Interconnect and Technology; -MEMS. System-on-Chip for Real-Time Applications contains many signal processing applications and will be of particular interest to those working in that community.

Download or read book Low Power Designs in Nanodevices and Circuits for Emerging Applications written by Shilpi Birla and published by CRC Press. This book was released on 2023-11-14 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference textbook discusses low power designs for emerging applications. This book focuses on the research challenges associated with theory, design, and applications towards emerging Microelectronics and VLSI device design and developments, about low power consumptions. The advancements in large-scale integration technologies are principally responsible for the growth of the electronics industry. This book is focused on senior undergraduates, graduate students, and professionals in the field of electrical and electronics engineering, nanotechnology. This book: • Discusses various low power techniques and applications for designing efficient circuits. • Covers advance nanodevices such as FinFETs, TFETs, CNTFETs. • Covers various emerging areas like Quantum-Dot Cellular Automata Circuits and FPGAs and sensors. • Discusses applications like memory design for low power applications using nanodevices. The number of options for ICs in control applications, telecommunications, high-performance computing, and consumer electronics continues to grow with the emergence of VLSI designs. Nanodevices have revolutionized the electronics market and human life; it has impacted individual life to make it more convenient. They are ruling every sector such as electronics, energy, biomedicine, food, environment, and communication. This book discusses various emerging low power applications using CMOS and other emerging nanodevices.

Download or read book VLSI SoC Design Methodologies for SoC and SiP written by Christian Piguet and published by Springer Science & Business Media. This book was released on 2010-04-06 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains extended and revised versions of the best papers that were p- sented during the 16th edition of the IFIP/IEEE WG10.5 International Conference on Very Large Scale Integration, a global System-on-a-Chip Design & CAD conference. The 16th conference was held at the Grand Hotel of Rhodes Island, Greece (October 13–15, 2008). Previous conferences have taken place in Edinburgh, Trondheim, V- couver, Munich, Grenoble, Tokyo, Gramado, Lisbon, Montpellier, Darmstadt, Perth, Nice and Atlanta. VLSI-SoC 2008 was the 16th in a series of international conferences sponsored by IFIP TC 10 Working Group 10.5 and IEEE CEDA that explores the state of the art and the new developments in the field of VLSI systems and their designs. The purpose of the conference was to provide a forum to exchange ideas and to present industrial and research results in the fields of VLSI/ULSI systems, embedded systems and - croelectronic design and test.

Download or read book Reconfigurable Computing Architectures Tools and Applications written by Phaophak Sirisuk and published by Springer. This book was released on 2010-03-10 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recon?gurable computing (RC) systems have generated considerable interest in the embedded and high-performance computing communities over the past two decades, with ?eld programmable gate arrays (FPGAs) as the leading techn- ogy at the helm of innovation in this discipline. Achieving orders of magnitude performance and power improvements using FPGAs over traditional microp- cessorsis not uncommon for well-suitedapplications. But even with two decades of research and technological advances, FPGA design still presents a subst- tial challenge and often necessitates hardware design expertise to exploit its true potential. Although the challenges to address the design productivity - sues are steep, the promise and the potential of the RC technology in terms of performance, power, size, and versatility continue to attract application design engineers and RC researchers alike. The International Symposium on Applied Recon?gurable Computing (ARC) aims to bring together researchers and practitioners of RC systems with an emphasis on practical applications and design methodologies of this promising technology. This year’s ARC symposium (The sixth ARC symposium) was held in Bangkok, Thailand during March 17–19, 2010, and attracted papers in three primary focus areas:RC applications, RC architectures, and RC design meth- ologies.