Download or read book Architectural Glass to Resist Seismic and Extreme Climatic Events written by Richard A. Behr and published by Elsevier. This book was released on 2009-09-14 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: Glass is a popular cladding material for modern buildings. The trend for steel-framed, glass-clad buildings instead of those using traditional materials such as brick and concrete has inherent problems. These include, for example, the performance of architectural glass in extreme climatic events such as windstorms and heavy snow loads and also during earthquakes. This book reviews the state-of-the-art in glass and glazing technology to resist failure due to these natural events.Building code seismic requirements for architectural glass in the United States are considered first of all, followed by a chapter on glazing and curtain wall systems to resist earthquakes. The next two chapters discuss snow loads on building envelopes and glazing systems, and types and design of glazing systems to resist snow loads. Wind pressures and the impact of wind-borne debris are then considered in the next group of chapters which also review special types of glazing systems to resist windstorms. A final chapter reviews test methods for the performance of glazing systems during earthquakes and extreme climatic events.With its distinguished editor and team of contributors, Architectural glass to resist seismic and extreme climatic events is an essential resource for architects, structural, civil and architectural engineers, researchers and those involved in designing and specifying building glazing and cladding materials in areas where severe windstorms, snow and earthquakes are a threat. - Considers the state of the art in glass and glazing technology to resist failure due to extreme climatic events - Reviews specific building techniques and test methods to enhance glazing performance during snow storms, wind storms and earthquakes

Download or read book Fa ade Design written by and published by BoD – Books on Demand. This book was released on 2024-01-24 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: Façade design is a challenging task, in which multidisciplinary issues and aspects should be optimally considered and addressed. This is especially the case of building façades exposed to seismic events, impacts, or fire. Special attention and major efforts are required for the detection and application of new technologies in the generation of modern, adaptive façade systems. This book presents a selection of research contributions to provide a comprehensive overview of façade design. It discusses the experimental analysis and numerical investigation of existing or traditional façades, as well as the development and optimal application of new technologies for modern adaptive façades and building envelopes.

Download or read book Challenging Glass 4 COST Action TU0905 Final Conference written by Christian Louter and published by CRC Press. This book was released on 2014-01-28 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume of the Challenging Glass 4 & COST Action TU0905 Final Conference, held 6-7 February 2014 at the EPFL in Lausanne, Switzerland, represents the Final Action Publication of the European research network COST Action TU0905 “Structural Glass – Novel design methods and next generation products”. It contains nearly 100 peer-reviewed papers – published by more than 180 authors from 22 different countries – that focus on the architectural and structural applications of glass in structures and facades. As such, it provides a profound state-of-the-art of structural glass design and engineering. A must-read for all architects, engineers, scientists, industry partners and other enthusiasts interested in this rapidly evolving and challenging domain.

Download or read book Characteristics and Uses of Steel Slag in Building Construction written by Ivanka Netinger Grubeša and published by Woodhead Publishing. This book was released on 2016-05-20 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: Characteristics and Uses of Steel Slag in Building Construction focuses predominantly on the utilization of ferrous slag (blast furnace and steel slag) in building construction. This extensive literature review discusses the worldwide utilization of ferrous slag and applications in all sectors of civil engineering, including structural engineering, road construction, and hydro-technical structures. It presents cutting-edge research on the characteristics and properties of ferrous slag, and its overall impact on the environment. - Comprehensively reviews the literature on the use of blast furnace and steel slag in civil engineering - Examines the environmental impact of slag production and its effect on human health - Presents cutting-edge research from worldwide studies on the use of blast furnace and steel slag

Download or read book ETHICS Endorse Technologies for Heritage Innovation written by Alessandra Battisti and published by Springer Nature. This book was released on 2024-01-04 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book outlines, within the Italian national framework, the current and potential paths oriented towards a new concept of Architectural Heritage, through actions referring to Innovation and Experimentation and Protection and Transformation of the Architectural Heritage. The development of the themes is articulated in two sessions dealing with the aspects related to the analysis and mapping of Architectural Heritage to face the context of the current Climate Crisis and the development of projects and experimentations oriented to the Green and Digital Transition. The evolution of the concept of Heritage, as conceived by the United Nations 2030 Agenda and in the Green Deal and New European Bauhaus, aimed at constructing an inclusive and universally recognised definition to support supranational objectives of sustainable human development, gives rise to innovative strategies, methodologies and technologies that—in a direction of mitigation, contrast and adaptation to climate change—allow for the safeguard, renewed management and a hope for valorisation of Heritage on a national scale. In this direction, the understanding of Architectural Heritage as a 'non-renewable resource' determines the need to activate design experimentation laboratories oriented towards regeneration, articulated and complex, which require, in order to respond to the challenges posed by our era, a sensitive and dialogic multidisciplinary vision of a holistic type. In fact, on the one hand, it is necessary to redefine the usability and management methods of built heritage through the adoption of digital, mobility, energy, ecological, social, green and blue infrastructures; on the other hand, it is necessary to introduce new qualitative and quantitative parameters and performance indicators, adequate to verify the validity of the implemented strategies in a perspective of adaptation to climate change, able to clarify contents, processes and tools to contrast future risks. The pursuit of these objectives refers to the innovation of training paths, professionalising procedures, administrative regulations, and public policies that involve citizens and the private partnership towards a different project qualification and empowerment of stakeholders, inhabitants, professionals, and clients. The Technological Project makes it possible to activate different interventions aimed at acting, in an integrated manner, on assets, context and communities, according to an approach that reinterprets them on a common score, as proposed by the European Next Generation programme in three priority aspects: digitalisation and innovation, environmental transition, increased resilience and social sustainability of national economies. In this scenario, the interventions aimed at outlining sustainable development actions will have to place these concepts at the centre in a harmonious vision that starts from the recognition and enhancement of the Architectural Heritage, recognising it as a fundamental asset of the territories.

Download or read book Eco efficient Materials for Mitigating Building Cooling Needs written by F. Pacheco-Torgal and published by Woodhead Publishing. This book was released on 2015-02-27 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Climate change is one of the most important environmental problems faced by Planet Earth. The majority of CO2 emissions come from burning fossil fuels for energy production and improvements in energy efficiency shows the greatest potential for any single strategy to abate global greenhouse gas (GHG) emissions from the energy sector. Energy related emissions account for almost 80% of the EU's total greenhouse gas emissions. The building sector is the largest energy user responsible for about 40% of the EU's total final energy consumption. In Europe the number of installed air conditioning systems has increased 500% over the last 20 years, but in that same period energy cooling needs have increased more than 20 times. The increase in energy cooling needs relates to the current higher living and working standards. In urban environments with low outdoor air quality (the general case) this means that in summer-time one cannot count on natural ventilation to reduce cooling needs. Do not forget the synergistic effect between heat waves and air pollution which means that outdoor air quality is worse in the summer aggravating cooling needs. Over the next few years this phenomenon will become much worse because more people will live in cities, more than 2 billion by 2050 and global warming will aggravate cooling needs. - An overview of materials to lessen the impact of urban heat islands - Excellent coverage of building materials to reduce air condtioning needs - Innovative products discussed such as Thermo and Electrochromic materials

Download or read book Eco efficient Construction and Building Materials written by Fernando Pacheco-Torgal and published by Woodhead Publishing. This book was released on 2014-02-14 with total page 641 pages. Available in PDF, EPUB and Kindle. Book excerpt: Eco-efficient Construction and Building Materials reviews ways of assessing the environmental impact of construction and building materials. Part one discusses the application of life cycle assessment (LCA) methodology to building materials as well as eco-labeling. Part two includes case studies showing the application of LCA methodology to different types of building material, from cement and concrete to wood and adhesives used in building. Part three includes case studies applying LCA methodology to particular structures and components. - Reviews ways of assessing the environmental impact of construction and building materials - Provides a thorough overview, including strengths and shortcomings, of the life cycle assessment (LCA) and eco-labeling of eco-efficient construction and building materials - Includes case studies showing the application of LCA methodology to different types of building material, from cement and concrete to wood and adhesives used in building

Download or read book Handbook of Alkali Activated Cements Mortars and Concretes written by F. Pacheco-Torgal and published by Elsevier. This book was released on 2014-11-20 with total page 855 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an updated state-of-the-art review on new developments in alkali-activation. The main binder of concrete, Portland cement, represents almost 80% of the total CO2 emissions of concrete which are about 6 to 7% of the Planet's total CO2 emissions. This is particularly serious in the current context of climate change and it could get even worse because the demand for Portland cement is expected to increase by almost 200% by 2050 from 2010 levels, reaching 6000 million tons/year. Alkali-activated binders represent an alternative to Portland cement having higher durability and a lower CO2 footprint. - Reviews the chemistry, mix design, manufacture and properties of alkali-activated cement-based concrete binders - Considers performance in adverse environmental conditions. - Offers equal emphasis on the science behind the technology and its use in civil engineering.

Download or read book Advances in Asphalt Materials written by Shin-Che Huang and published by Woodhead Publishing. This book was released on 2015-04-08 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: The urgent need for infrastructure rehabilitation and maintenance has led to a rise in the levels of research into bituminous materials. Breakthroughs in sustainable and environmentally friendly bituminous materials are certain to have a significant impact on national economies and energy sustainability. This book will provide a comprehensive review on recent advances in research and technological developments in bituminous materials. Opening with an introductory chapter on asphalt materials and a section on the perspective of bituminous binder specifications, Part One covers the physiochemical characterisation and analysis of asphalt materials. Part Two reviews the range of distress (damage) mechanisms in asphalt materials, with chapters covering cracking, deformation, fatigue cracking and healing of asphalt mixtures, as well as moisture damage and the multiscale oxidative aging modelling approach for asphalt concrete. The final section of this book investigates alternative asphalt materials. Chapters within this section review such aspects as alternative binders for asphalt pavements such as bio binders and RAP, paving with asphalt emulsions and aggregate grading optimization. - Provides an insight into advances and techniques for bituminous materials - Comprehensively reviews the physicochemical characteristics of bituminous materials - Investigate asphalt materials on the nano-scale, including how RAP/RAS materials can be recycled and how asphalt materials can self-heal and rejuvenator selection

Download or read book Sustainability of Construction Materials written by Jamal Khatib and published by Woodhead Publishing. This book was released on 2016-08-12 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainability of Construction Materials, Second Edition, explores an increasingly important aspect of construction. In recent years, serious consideration has been given to environmental and societal issues in the manufacturing, use, disposal, and recycling of construction materials. This book provides comprehensive and detailed analysis of the sustainability issues associated with these materials, mainly in relation to the constituent materials, processing, recycling, and lifecycle environmental impacts. The contents of each chapter reflect the individual aspects of the material that affect sustainability, such as the preservation and repair of timber, the use of cement replacements in concrete, the prevention and control of metal corrosion and the crucial role of adhesives in wood products. - Provides helpful guidance on lifecycle assessment, durability, recycling, and the engineering properties of construction materials - Fully updated to take on new developments, with an additional nineteen chapters added to include natural stone, polymers and plastics, and plaster products - Provides essential reading for individuals at all levels who are involved in the construction and selection, assessment and use, and maintenance of materials

Download or read book Transport Properties of Concrete written by Peter A. Claisse and published by Elsevier. This book was released on 2014-05-09 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transport Properties of Concrete covers how to measure the ability of ions and fluids to move through concrete material, and how to use the results to model performance. These transport properties largely determine the durability of concrete and of steel embedded within it, as well as the effectiveness of structures such as landfill containment barriers. The book begins by explaining in detail what transport properties are and how to write computer models for transport processes. Early chapters present and explain computer models written in basic code. Coverage then proceeds to a wide range of tests for the transport properties of concrete, and methods for calculating the values for these properties from the test results using analytical and numerical models. The final chapters then show how the values obtained can be used to predict the durability of reinforced concrete, to model the effect of gas pressure, and to model waste containment structures. A number of practical examples are given, in which the calculations and computer models have been applied to real experimental data. Transport Properties of Concrete provides a comprehensive examination of the subject, and will be of use to all concerned with the durability and effectiveness of concrete structures. - Provides a detailed understanding of the various transport mechanisms that take place during testing in concrete - Shows how to obtain fundamental transport properties

Download or read book Smart Buildings written by Marco Casini and published by Woodhead Publishing. This book was released on 2016-05-27 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Buildings: Advanced Materials and Nanotechnology to Improve Energy Efficiency and Environmental Performance presents a thorough analysis of the latest advancements in construction materials and building design that are applied to maximize building efficiency in both new and existing buildings. After a brief introduction on the issues concerning the design process in the third millennium, Part One examines the differences between Zero Energy, Green, and Smart Buildings, with particular emphasis placed on the issue of smart buildings and smart housing, mainly the 'envelope' and how to make it more adaptive with the new possibilities offered by nanotechnology and smart materials. Part Two focuses on the last generation of solutions for smart thermal insulation. Based on the results of extensive research into more innovative insulation materials, chapters discuss achievements in nanotechnology, bio-ecological, and phase-change materials. The technical characteristics, performance level, and methods of use for each are described in detail, as are the achievements in the field of green walls and their use as a solution for upgrading the energy efficiency and environmental performance of existing buildings. Finally, Part Three reviews current research on smart windows, with the assumption that transparent surfaces represent the most critical element in the energy balance of the building. Chapters provide an extensive review on the technical features of transparent closures that are currently on the market or under development, from so-called dynamic glazing to bio-adaptive and photovoltaic glazing. The aesthetic potential and performance limits are also be discussed. - Presents valuable definitions that are given to explain the characteristics, requirements, and differences between 'zero energy', 'green' and 'smart' buildings - Contains particular focus on the next generation of construction materials and the most advanced products currently entering the market - Lists both the advantages and disadvantages to help the reader choose the most suitable solution - Takes into consideration both design and materials aspects - Promotes the existence of new advanced materials providing technical information to encourage further use and reduce costs compared to more traditional materials

Download or read book Acoustic Emission and Related Non destructive Evaluation Techniques in the Fracture Mechanics of Concrete written by Masayasu Ohtsu and published by Woodhead Publishing. This book was released on 2015-03-28 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of NDT (non-destructive testing) techniques used for the inspection of concrete structures is currently in high demand, because many existing structures have become aged and deteriorated in service. In order to formulate predictions on their stability and to estimate their safety, it is necessary to identify damage signals and to determine their causes. In this regard, the development and establishment of innovative and highly advanced non-destructive methods are required. Acoustic Emission (AE) and related NDE (non-destructive evaluation) techniques have been extensively used to determine crack detection and damage evaluation in concrete. With the move towards a more sustainable society, and the need to extend the long-term service life of infrastructure and aging and disastrous damage due to recent earthquakes, Acoustic Emission (AE) and Related Non-destructive Evaluation (NDE) Techniques in the Fracture Mechanics of Concrete: Fundamentals and Applications is a critical reference source for civil engineers, contractors working in construction and materials scientists working both in industry and academia. - Presents innovative Acoustic Emission (AE) and related non-destructive evaluation (NDE) techniques, used for damage detection and inspection of aged and deteriorated concrete structures - Contributions from recognized world-leaders in the application of acoustic emission (AE) and NDE techniques used for the damage assessment of concrete and concrete structures - With the move towards a more sustainable society, and the need to extend the long-term service life of infrastructure and damage due to recent earthquakes, this book is of critical importance - An essential knowledge resource for civil engineers, contractors working in construction and materials scientists working both in industry and academia

Download or read book The Utilization of Slag in Civil Infrastructure Construction written by George C. Wang and published by Woodhead Publishing. This book was released on 2016-06-24 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Utilization of Slag in Civil Infrastructure Construction strives to integrate the theory, research, and practice of slag utilization, including the production and processing of slags. The topics covered include: production and smelting processes for metals; chemical and physical properties of slags; pretreatment and post-treatment technology to enhance slag properties; potential environmental impact; mechanisms of potential expansion; special testing methods and characteristics; slag processing for aggregate and cementitious applications; suitability of slags for use in specific applications; overall properties of materials containing slags; and commercialization and economics. The focus of the book is on slag utilization technology, with a review of the basic properties and an exploration of how its use in the end product will be technically sound, environment-friendly, and economic. - Covers the production, processing, and utilization of a broad range of ferrous, non-ferrous, and non-metallurgical slags - Provides information on applicable methods for a particular slag and its utilization to reduce potential environmental impacts and promote natural resource sustainability - Presents the overall technology of transferring a slag from the waste stream into a useful materials resource - Provides a detailed review of the appropriate utilization of each slag from processing right through to aggregate and cementitious use requirements

Download or read book Start Up Creation written by F. Pacheco-Torgal and published by Woodhead Publishing. This book was released on 2016-05-14 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Start-Up Creation: The Smart Eco-efficient Built Environment provides a state-of-the-art review on high-technology applications and explains how these can be applied to improve the eco-efficiency of the built environment. Divided into four main parts, the book explains the key factors behind successful startup companies that grow from university research, including the development of a business plan, the importance of intellectual property, necessary entrepreneurial skills, and innovative thinking. Part Two presents the latest research findings on nano and bio-based technologies and their application and use to the energy efficiency of the built environment. Part Three focuses on the use of genetic algorithms, Big Data, and the Internet of Things applications. Finally, the book ends with an entire section dedicated to App development using selected case studies that illustrate their application and use for monitoring building energy-efficiency. Presents a definitive guide for startups that arise from college and university research, and how the application of advanced technologies can be applied to the built environment Includes case studies on new advanced technologies and apps development Links startup creation to the eco-efficient built environment through software applications

Download or read book Nonconventional and Vernacular Construction Materials written by Kent A. Harries and published by Woodhead Publishing. This book was released on 2016-01-28 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonconventional and Vernacular Construction Materials: Characterisation, Properties and Applications provides a comprehensive repository of information on materials science and the modern structural engineering application of ancient, vernacular, and nonconventional building materials, with leading experts contributing chapters that focus on current applications and the engineering of these construction materials. Opening with a historic retrospective of nonconventional materials, Part One includes a review of vernacular construction and a discussion of the future directions for nonconventional and vernacular materials research and applications. Chapters in Part Two focus on natural fibers, including their application in cementitious composites, non-cementitious composites, and strawbale construction. In Part Three, chapters cover the use of industrial by-products and natural ashes in cement mortar and concrete, and construction using soil-cement blocks, clay-based materials, adobe and earthen materials, and ancient stone masonry. Timber, bamboo, and paper construction materials are investigated in the final section of the book. - Provides a state-of-the-art review of the modern use and engineering of nonconventional building materials - Contains chapters that focus on individual construction materials and address both material characterization and structural applications - Covers sustainable engineering and the trend towards engineering for humanity

Download or read book Biopolymers and Biotech Admixtures for Eco Efficient Construction Materials written by Fernando Pacheco-Torgal and published by Woodhead Publishing. This book was released on 2016-01-11 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since 1930 more than 100,000 new chemical compounds have been developed and insufficient information exists on the health assessment of 95 percent of these chemicals in which a relevant percentage are used in construction products. For instance Portland cement concrete, the most used material on the Planet (10.000 million tons/year that in the next 40 years will increase around 100 %) currently used in around 15% of total concrete production contains chemicals used to modify their properties, either in the fresh or hardened state. Biopolymers are materials that are developed from natural resources. They reduce dependence on fossil fuels and reduce carbon dioxide emissions. There is a worldwide demand to replace petroleum-based materials with renewable resources. Currently bio-admixtures represent just a small fraction of the chemical admixtures market (around 20%) but with environmental awareness for constituents in construction materials generally growing (the Construction Products Regulation is being enforced in Europe since 2013), the trend towards bio-admixtures is expected to continue. This book provides an updated state-of-the-art review on biopolymers and their influence and use as admixtures in the development of eco-efficient construction materials. - Provides essential knowledge for researchers and producers working on the development of biopolymer-modified construction materials - Discusses the various types of biopolymers currently available, their different production techniques, their use as bio-admixtures in concretes and mortars and applications in other areas of civil engineering such as soil stability, wood preservation, adhesives and coatings - All contributions are made from leading researchers, who have intensive involvement in the design and use of biopolymers in construction materials