Download or read book Architecting A Knowledge Based Platform for Design Engineering 4 0 written by Zhenjun Ming and published by Springer Nature. This book was released on 2022-02-10 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Design Engineering for Industry 4.0 (DE4.0) represents the 'human-cyber-physical view of the systems realization ecosystem “that is necessary to accommodate the drivers of Industry 4.0 (IoX) and provide an open ecosystem for the realization of complex systems. Seamless integration of digital threads and digital twins throughout the product design, the development and fulfillment lifecycle; the ability to accommodate diverse and rapidly changing technologies; and the mechanisms to facilitate the creation of new opportunities for the design of products, processes, services, and systems are some of the desired characteristics of DE4.0." Jiao, R., Commuri, S. Panchal, J., Milisavljevic-Syed, J, Allen, J.K., Mistree, F. and Schaefer, D., "Design Engineering in the Age of Industry 4.0," ASME Journal of Mechanical Design, 143(7), 070801, 25 pages. In keeping with the Design Engineering 4.0 construct the authors describe architecting a computer platform to support human designers make decisions associated with the realization of complex engineered systems. The platform is designed to facilitate end-to-end digital integration, customization and personalization, agile collaboration networks, open innovation, co-creation and crowdsourcing, product servitization and anything-as-a-service. Recognizing that simulation models are abstractions of reality the authors opt for a satisficing strategy instead of an optimization strategy. They include fundamentals and then describe tools for architecting a knowledge-based platforms for decision support. Challenges associated with developing a computational platform for decision support for the realization of complex engineered systems in the context of Design Engineering 4.0 are identified. Constructs for formulating design decisions (e.g., selection, compromise, and coupled decisions), knowledge modelling schemes (e.g., ontologies and modular templates), diagrams for designing decision workflows (e.g., the PEI-X diagram), and some analytical methods for robust design under uncertainty are presented. The authors describe integrating the knowledge-based platform to architect a cloud-based platform for decision support promoting co-design and cloud-based design communication essential for mass collaboration and open innovation for Design Engineering 4.0. This book is a valuable resource for researchers, design engineers, and others working on pushing the boundary of digitized manufacturing to include Design Engineering 4.0 principles in designing products, processes, and services.
Download or read book Computer Aided Design Guide for Architecture Engineering and Construction written by Ghassan Aouad and published by Routledge. This book was released on 2013-06-17 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent years have seen major changes in the approach to Computer Aided Design (CAD) in the architectural, engineering and construction (AEC) sector. CAD is increasingly becoming a standard design tool, facilitating lower development costs and a reduced design cycle. Not only does it allow a designer to model designs in two and three dimensions but also to model other dimensions, such as time and cost into designs. Computer Aided Design Guide for Architecture, Engineering and Construction provides an in-depth explanation of all the common CAD terms and tools used in the AEC sector. It describes each approach to CAD with detailed analysis and practical examples. Analysis is provided of the strength and weaknesses of each application for all members of the project team, followed by review questions and further tasks. Coverage includes: 2D CAD 3D CAD 4D CAD nD modelling Building Information Modelling parametric design, virtual reality and other areas of future expansion. With practical examples and step-by step guides, this book is essential reading for students of design and construction, from undergraduate level onwards.
Download or read book eWork and eBusiness in Architecture Engineering and Construction written by Ardeshir Mahdavi and published by CRC Press. This book was released on 2014-08-21 with total page 962 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last two decades, the biannual ECPPM (European Conference on Product and Process Modelling) conference series has provided a unique platform for the presentation and discussion of the most recent advances with regard to the ICT (Information and Communication Technology) applications in the AEC/FM (Architecture, Engineering, Construction and Facilities Management) domains. ECPPM 2014, the 10th European Conference on Product and Process Modelling, was hosted by the Department of Building Physics and Building Ecology of the Vienna University of Technology, Austria (17-19 September 2014). This book entails a substantial number of high-quality contributions that cover a large spectrum of topics pertaining to ICT deployment instances in AEC/FM, including: - BIM (Building Information Modelling) - ICT in Civil engineering & Infrastructure - Human requirements & factors - Computational decision support - Commissioning, monitoring & occupancy - Energy & management - Ontology, data models, and IFC (Industry Foundation Classes) - Energy modelling - Thermal performance simulation - Sustainable buildings - Micro climate modelling - Model calibration - Project & construction management - Data & information management As such, eWork and eBusiness in Architecture, Engineering and Construction 2014 represents a rich and comprehensive resource for academics and professionals working in the interdisciplinary areas of information technology applications in architecture, engineering, and construction.
Download or read book Advances in Civil Engineering and Building Materials written by Shuenn-Yih Chang and published by CRC Press. This book was released on 2012-10-31 with total page 976 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Civil Engineering and Building Materials presents the state-of-the-art development in: - Structural Engineering - Road & Bridge Engineering - Geotechnical Engineering - Architecture & Urban Planning - Transportation Engineering - Hydraulic Engineering - Engineering Management - Computational Mechanics - Construction Technology - Building Materials - Environmental Engineering - Computer Simulation - CAD/CAE Emphasis was given to basic methodologies, scientific development and engineering applications. Advances in Civil Engineering and Building Materials will be useful to professionals, academics, and Ph.D. students interested in the above mentioned areas.
Download or read book Knowledge based Design Systems written by Richard Coyne and published by Addison Wesley Publishing Company. This book was released on 1990 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Business Architecture Strategy and Platform Based Ecosystems written by Young Won Park and published by Springer. This book was released on 2017-10-31 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a framework and real case analyses concerning business architecture strategy and platform-based ecosystems. Firstly, the book introduces a framework of business architecture strategy and suggests an engineering process that employs a business architecture analysis system in which the various business best-practices information technology (IT) tools are integrated into an interface. More specifically, this architecture analysis provides the means to realize two essential features: a strategy that allows global firms to sense changing market needs, and a tool that combines mechanical engineering with electronics and software IT tools. Secondly, the book discusses platform-based ecosystems. Crucial issues for today’s firms are associated with value creation through their platform and ecosystem framework. With a major emphasis on modular product architecture, US firms have focused heavily on platform development in modular industries. Their base is operation system (OS) software, so that IT firms in general focus on software capabilities—and digital control in particular. In contrast, the advantage for Japanese firms is not digital but analog control. Without any drastic changes in their industry practices, Japanese firms are likely to sustain their analog platform advantage. The book subsequently puts forward a holistic view through the connection of business architecture strategy and platform-based ecosystems. The theoretical framework and case illustrations are especially useful to firms involved in a variety of industries that must respond to the turbulent environmental changes of the digital era. Most of the cases target not only Japanese firms but also many other global firms. Readers are systematically shown how to balance technological competence and customer competence by using the framework of business architecture strategy and platform-based ecosystems.
Download or read book Product Lifecycle Management Leveraging Digital Twins Circular Economy and Knowledge Management for Sustainable Innovation written by Christophe Danjou and published by Springer Nature. This book was released on with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book eWork and eBusiness in Architecture Engineering and Construction ECPPM 2016 written by Symeon Christodoulou and published by CRC Press. This book was released on 2017-03-27 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: eWork and eBusiness in Architecture, Engineering and Construction 2016 collects the papers presented at the 11th European Conference on Product & Process Modelling (ECPPM 2016, Cyprus, 7-9 September 2016), The contributions cover complementary thematic areas that hold great promise for the advancement of research and technological development in the modelling of complex engineering systems, encompassing a substantial number of high quality contributions on a large spectrum of topics pertaining to ICT deployment instances in AEC/FM, including: • Information and Knowledge Management • Construction Management • Description Logics and Ontology Application in AEC • Risk Management • 5D/nD Modelling, Simulation and Augmented Reality • Infrastructure Condition Assessment • Standardization of Data Structures • Regulatory and Legal Aspects • Multi-Model and distributed Data Management • System Identification • Industrialized Production, Smart Products and Services • Interoperability • Smart Cities • Sustainable Buildings and Urban Environments • Collaboration and Teamwork • BIM Implementation and Deployment • Building Performance Simulation • Intelligent Catalogues and Services
Download or read book Research in Interactive Design Vol 4 written by Xavier Fischer and published by Springer. This book was released on 2016-03-02 with total page 637 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering key topics in the field such as technological innovation, human-centered sustainable engineering and manufacturing, and manufacture at a global scale in a virtual world, this book addresses both advanced techniques and industrial applications of key research in interactive design and manufacturing. Featuring the full papers presented at the 2014 Joint Conference on Mechanical Design Engineering and Advanced Manufacturing, which took place in June 2014 in Toulouse, France, it presents recent research and industrial success stories related to implementing interactive design and manufacturing solutions.
Download or read book Knowledge Based and Intelligent Information and Engineering Systems Part III written by Andreas König and published by Springer. This book was released on 2011-09-15 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: The four-volume set LNAI 6881-LNAI 6884 constitutes the refereed proceedings of the 15th International Conference on Knowledge-Based Intelligent Information and Engineering Systems, KES 2011, held in Kaiserslautern, Germany, in September 2011. Part 3: The total of 244 high-quality papers presented were carefully reviewed and selected from numerous submissions. The 67 papers of Part 3 are organized in topical sections on skill acquisition and ubiquitous human computer interaction, intelligent network and service, management technologies from the perspective of kansei engineering and emotion, data mining and service science for innovation, knowledge-based systems for e-business, knowledge engineering applications in process systems and plant operations, advanced design techniques for adaptive hardware and systems, human-oriented learning technology and learning support environment, design of social intelligence and creativity environment.
Download or read book ECPPM 2022 eWork and eBusiness in Architecture Engineering and Construction 2022 written by Eilif Hjelseth and published by CRC Press. This book was released on 2023-03-29 with total page 1412 pages. Available in PDF, EPUB and Kindle. Book excerpt: ECPPM 2022 - eWork and eBusiness in Architecture, Engineering and Construction contains the papers presented at the 14th European Conference on Product & Process Modelling (ECPPM 2022, Trondheim, Norway, 14-16 September 2022), and builds on a long-standing history of excellence in product and process modelling in the construction industry, which is currently known as Building Information Modelling (BIM). The following topics and applications are given special attention: Sustainable and Circular Driven Digitalisation: Data Driven Design and/or Decision Support Assessment and Documentation of Sustainability Information lifecycle Data Management: Collection, Processing and Presentation of Environmental Product Documentation (EPD) and Product Data Templates (PDT) Digital Enabled Collaboration: Integrated and Multi-Disciplinary Processes Virtual Design and Construction (VDC): Production Metrics, Integrated Concurrent Engineering, Lean Construction and Information Integration Automation of Processes: Automation of Design and Engineering Processes, Parametric Modelling and Robotic Process Automation Expert Systems: BIM based model and compliance checking Enabling Technologies: Machine Learning, Big Data, Artificial and Augmented Intelligence, Digital Twins, Semantic Technology Sensors and IoT Production with Autonomous Machinery, Robotics and Combinations of Existing and New Technical Solutions Frameworks for Implementation: International Information Management Series (ISO 19650), and Other International Standards (ISO), European (CEN) and National Standards, Digital Platforms and Ecosystems Human Factors in Digital Application: Digital Innovation, Economy of Digitalisation, Client, Organisational, Team and/or Individual Perspectives Over the past 25 years, the biennial ECPPM conference proceedings series has provided researchers and practitioners with a unique platform to present and discuss the latest developments regarding emerging BIM technologies and complementary issues for their adoption in the AEC/FM industry.
Download or read book ECPPM 2021 eWork and eBusiness in Architecture Engineering and Construction written by Vitaly Semenov and published by CRC Press. This book was released on 2021-07-25 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: eWork and eBusiness in Architecture, Engineering and Construction 2021 collects the papers presented at the 13th European Conference on Product and Process Modelling (ECPPM 2021, Moscow, 5-7 May 2021). The contributions cover a wide spectrum of thematic areas that hold great promise towards the advancement of research and technological development targeted at the digitalization of the AEC/FM (Architecture, Engineering, Construction and Facilities Management) domains. High quality contributions are devoted to critically important problems that arise, including: Information and Knowledge Management Semantic Web and Linked Data Communication and Collaboration Technologies Software Interoperability BIM Servers and Product Lifecycle Management Systems Digital Twins and Cyber-Physical Systems Sensors and Internet of Things Big Data Artificial and Augmented Intelligence in AEC Construction Management 5D/nD Modelling and Planning Building Performance Simulation Contract, Cost and Risk Management Safety and Quality Sustainable Buildings and Urban Environments Smart Buildings and Cities BIM Standardization, Implementation and Adoption Regulatory and Legal Aspects BIM Education and Training Industrialized Production, Smart Products and Services Over the past quarter century, the biennial ECPPM conference series, as the oldest BIM conference, has provided researchers and practitioners with a unique platform to present and discuss the latest developments regarding emerging BIM technologies and complementary issues for their adoption in the AEC/FM industry.
Download or read book Building the Knowledge Economy written by Paul M. Cunningham and published by IOS Press. This book was released on 2003 with total page 882 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of the Internet and information and communication technologies to the global economy has never been greater. This volume aims to facilitate knowledge sharing relevant to everyone, irrespective of background, thematic or goegraphic focus.
Download or read book COTS Based Software Systems written by Xavier Franch and published by Springer Science & Business Media. This book was released on 2005-01-31 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 4th International Conference on COTS-Based Software Systems, ICCBSS 2005, held in Bilbao, Spain in February 2005. The 28 revised full papers presented together with summaries of panels, workshops, tutorials, and posters were carefully reviewed and selected from numerous submissions. The papers are organized in topical sections on COTS at business, integration and interoperability, evaluation and requirements, safety and dependability, architecture and design, COTS management, and open source software.
Download or read book Knowledge Management in the Development of Data Intensive Systems written by Ivan Mistrik and published by CRC Press. This book was released on 2021-06-15 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Data-intensive systems are software applications that process and generate Big Data. Data-intensive systems support the use of large amounts of data strategically and efficiently to provide intelligence. For example, examining industrial sensor data or business process data can enhance production, guide proactive improvements of development processes, or optimize supply chain systems. Designing data-intensive software systems is difficult because distribution of knowledge across stakeholders creates a symmetry of ignorance, because a shared vision of the future requires the development of new knowledge that extends and synthesizes existing knowledge. Knowledge Management in the Development of Data-Intensive Systems addresses new challenges arising from knowledge management in the development of data-intensive software systems. These challenges concern requirements, architectural design, detailed design, implementation and maintenance. The book covers the current state and future directions of knowledge management in development of data-intensive software systems. The book features both academic and industrial contributions which discuss the role software engineering can play for addressing challenges that confront developing, maintaining and evolving systems;data-intensive software systems of cloud and mobile services; and the scalability requirements they imply. The book features software engineering approaches that can efficiently deal with data-intensive systems as well as applications and use cases benefiting from data-intensive systems. Providing a comprehensive reference on the notion of data-intensive systems from a technical and non-technical perspective, the book focuses uniquely on software engineering and knowledge management in the design and maintenance of data-intensive systems. The book covers constructing, deploying, and maintaining high quality software products and software engineering in and for dynamic and flexible environments. This book provides a holistic guide for those who need to understand the impact of variability on all aspects of the software life cycle. It leverages practical experience and evidence to look ahead at the challenges faced by organizations in a fast-moving world with increasingly fast-changing customer requirements and expectations.
Download or read book System Design Interview An Insider s Guide written by Alex Xu and published by Independently Published. This book was released on 2020-06-12 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: The system design interview is considered to be the most complex and most difficult technical job interview by many. Those questions are intimidating, but don't worry. It's just that nobody has taken the time to prepare you systematically. We take the time. We go slow. We draw lots of diagrams and use lots of examples. You'll learn step-by-step, one question at a time.Don't miss out.What's inside?- An insider's take on what interviewers really look for and why.- A 4-step framework for solving any system design interview question.- 16 real system design interview questions with detailed solutions.- 188 diagrams to visually explain how different systems work.
Download or read book The Building News and Engineering Journal written by and published by . This book was released on 1893 with total page 938 pages. Available in PDF, EPUB and Kindle. Book excerpt:
