Download or read book Aqueous Polymeric Coatings for Pharmaceutical Dosage Forms Third Edition written by Linda A. Felton and published by CRC Press. This book was released on 2008-01-09 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thoroughly updated and expanded, this new Third Edition provides the latest information on dosage, forms, film defects, and polymer characterization. Written by renowned leaders in the field, Aqueous Polymeric Coatings for Pharmaceutical Dosage Forms is easily the most comprehensive book available on the market today. New to the Third Edition: the interaction of drugs with functional polymers the influence of processing parameters on coating quality the stabilization of polymeric film coats plasticizers and their applications in pharmaceutical coatings adhesion of polymeric films to solid substrates basic properties of latex and pseudolatex colloidal dispersions Key topics included: polymer interactions with drugs and excipients physical aging of polymeric films a complete overview and in-depth analysis of recent advances in the field, which includes information on the latest equipment used to apply polymers to a pharmaceutical system illustrated examples explaining the appropriate steps to be taken in order to solve formulation, processing, and stability problems to achieve an optimized dosage form
Download or read book Aqueous Polymeric Coatings for Pharmaceutical Dosage Forms written by Linda A. Felton and published by CRC Press. This book was released on 2016-09-19 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aqueous-based film coating has become routine in the pharmaceutical industry. This process eliminates the use of organic solvents and thus avoids economic, environmental, and toxicological issues related to residual solvents and solvent recovery. Aqueous-based coating, however, is complex and many variables may impact the final product and its performance. This fourth edition of Aqueous Polymeric Coatings for Pharmaceutical Dosage Forms aims to provide insight into the factors and parameters that should be considered and controlled for the successful development and commercialization of a coated product. The fourth edition has been revised and expanded to reflect the most recent scientific advancements from the literature. The contributing authors explain in detail, using illustrated examples, appropriate steps to solve and ideally avoid formulation, processing, and stability problems and to achieve an optimized dosage form. Trade names and chemical names of commercially marketed coatings are used throughout the text to help familiarize the reader with the various materials available for pharmaceutical applications. This book will be a valuable resource for anyone in the pharmaceutical industry working in the area of aqueous-based film coating.
Download or read book Polymers Coatings written by Inamuddin and published by John Wiley & Sons. This book was released on 2020-05-27 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The explores the cutting-edge technology of polymer coatings. It discusses fundamentals, fabrication strategies, characterization techniques, and allied applications in fields such as corrosion, food, pharmaceutical, biomedical systems and electronics. It also discusses a few new innovative self-healing, antimicrobial and superhydrophobic polymer coatings. Current industrial applications and possible potential activities are also discussed.
Download or read book Handbook of Waterborne Coatings written by Peter Zarras and published by Elsevier. This book was released on 2020-08-13 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Waterborne Coatings comprehensively reviews recent developments in the field of waterborne coatings. Crucial aspects associated with coating research are presented, with close attention paid to the essential aspects that are necessary to understand the properties of novel materials and their use in coating materials. The work introduces the reader to progress in the field, also outlining applications, methods and techniques of synthesis and characterization that are demonstrated throughout. In addition, insights into ongoing research, current trends and challenges are previewed. Topics chosen ensure that new scholars or advanced learners will find the book an essential resource. - Serves as a reference guide to recent developments in waterborne coatings for industrialists, scientists and engineers involved in the field of coatings - Presents coverage of the unique application methods for waterborne coatings and when those methods should be used - Provides foundational information on waterborne coatings and discusses current market trends that impact the field
Download or read book Coatings for Biomedical Applications written by Mike Driver and published by Elsevier. This book was released on 2012-02-22 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: The biomaterials sector is rapidly expanding and significant advances have been made in the technology of biomedical coatings and materials, which provide a means to improve the wear of joints, change the biological interaction between implant and host and combine the properties of various materials to improve device performance. Coatings for biomedical applications provides an extensive review of coating types and surface modifications for biomedical applications.The first part of the book explores a range of coating types and their biomedical applications. Chapters look at hydrophilic, mineral and pyrolytic carbon coatings in and ex vivo orthopaedic applications and finally at surface modification and preparation techniques. Part two presents case studies of orthopaedic and ophthalmic coatings, and biomedical applications including vascular stents, cardiopulomonary by-pass equipment and ventricular assist devices.With its clear structure and comprehensive review of research, Coatings for biomedical applications is a valuable resource to researchers, scientists and engineers in the biomedical industry. It will also benefit anyone studying or working within the biomedical sector, particularly those specialising in biomedical coatings. - Provides an extensive review of coating types and surface modifications for biomedical applications - Chapters look at hydrophilic coatings for biomedical applications in and ex vivo, mineral coatings for orthopaedic applications, pyrolytic carbon coating and other commonly-used biomedical coatings - Presents case studies of orthopaedic and ophthalmic coatings, and biomedical applications including vascular stents, cardiopulomonary by-pass equipment and ventricular assist devices
Download or read book Aqueous Polymeric Coatings for Pharmaceutical Dosage Forms written by James W. McGinity and published by . This book was released on 1989 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents an analysis of advances in aqueous-based polymeric coatings used around the world, providing coverage of coated dosage forms, film defects, and the characterization of polymers. The second edition offers information on biodegradeable and sillicone-based elastomer dispersions, the physical and mechanical properties of polymeric films, and more.
Download or read book Modern Pharmaceutics written by Gilbert S. Banker and published by CRC Press. This book was released on 2002-05-24 with total page 1255 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Completely revised and expanded throughout. Presents a comprehensive integrated, sequenced approach to drug dosage formulation, design, and evaluation. Indentifies the pharmacodynamic and physicochemical factors influencing drug action through various routes of administration."
Download or read book Surface Application of Paper Chemicals written by J. Brander and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the exception of a slight hiccup during the height of the recent environmental movement (during the early 1990s), when for a year or two consumers were prepared to pay a price premium for lower quality recycled paper than for the virgin product, the inexorable improvement in the quality demanded of paper products continues. This demand for quality covers not only the aesthetics ofthe product but also its performance. Moreover, it is becoming increasingly the case that papers designed for a particular use must, as it were incidentally, also perform well in alternative applications. An example is that of office and printing papers, which are expected to perform as well in copier machines as in all the various forms of impact and non-impact printers. But even greater demands are made in other product areas, where board designed for dry foods can also be expected to protect moist and fatty materials and be made of 100% recycled fibre. The need to isolate foodstuffs from some of the contaminants that can affect recycled board is a· serious challenge. Thus, papermakers are constantly striving to meet a broadening spectrum of demands on their products; often while accepting declining quality of raw materials. The product design philosophy that has arisen in response to this is increasingly to isolate the bulk of a paper from its uses: to engineer the needed performance characteristics into the paper surfaces while more or less ignoring what happens inside.
Download or read book Polymer Dispersions and Their Industrial Applications written by Dieter Urban and published by Wiley-VCH. This book was released on 2002 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aqueous polymer dispersions are environmentally friendly and therefore they have replaced in many applications polymers dissolved in organic solvents. This substitution process is still ongoing. This book discusses the world of aqueous polymer dispersions from the viewpoint of how they are applied. For a better understanding it starts with a general description of the synthesis of polymer dispersions and their characterization. The following chapters are dedicated to a wide variety of applications, including history, modern processes, and typical formulations and performance. The selection and the usage of a polymer dispersion are not uniform around the world because of historical and regional differences of the technical developments and marketing demands. Leading scientists from industry contributed to this book ensuring that practical issues are emphasized.
Download or read book Library of Congress Subject Headings written by Library of Congress and published by . This book was released on 2011 with total page 1352 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A E written by Library of Congress. Office for Subject Cataloging Policy and published by . This book was released on 1990 with total page 1548 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Functional Polymer Coatings written by Limin Wu and published by John Wiley & Sons. This book was released on 2015-06-15 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on a variety of coatings, this book provides detailed discussion on preparation, novel techniques, recent developments, and design theories to present the advantages of each function and provide the tools for better product performance and properties. • Presents advantages and benefits of properties and applications of the novel coating types • Includes chapters on specific and novel coatings, like nanocomposite, surface wettability tunable, stimuli-responsive, anti-fouling, antibacterial, self-healing, and structural coloring • Provides detailed discussion on recent developments in the field as well as current and future perspectives • Acts as a guide for polymer and materials researchers in optimizing polymer coating properties and increasing product performance
Download or read book Polymer Coatings written by Jyotishkumar Parameswaranpillai and published by . This book was released on 2022-05-18 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer coating methods / Dr. Raj Kumar Arya -- Polymer coatings based on nanocomposites / Dr. Alfonso Pérez -- Mechanism, anti-corrosion protection and components of anti-corrosion polymer coatings / (Dr). Akarsh Verma.
Download or read book Aqueous Polymeric Coatings for Pharmaceutical Dosage Forms Second Edition written by McGinity James and published by CRC Press. This book was released on 1996-10-11 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents an analysis of advances in aqueous-based polymeric coatings used around the world, providing coverage of coated dosage forms, film defects, and the characterization of polymers. The second edition offers information on biodegradeable and sillicone-based elastomer dispersions, the physical and mechanical properties of polymeric films, and more.
Download or read book Surfactants and Polymers in Aqueous Solution written by Krister Holmberg and published by Wiley. This book was released on 2002-11-22 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many industrial formulations such as detergents, paints, foodstuff and cosmetics contain both surfactants and polymers and their interaction govern many of the properties. This book is unique in that it discusses the solution chemistry of both surfactants and polymers and also the interactions between the two. The book, which is based on successful courses given by the authors since 1992, is a revised and extended version of the first edition that became a market success with six reprints since 1998. Surfactants and Polymers in Aqueous Solution is broad in scope, providing both theoretical insights and practical help for those active in the area. This book contains a thorough discussion of surfactant types and gives information of main routes of preparation. A chapter on novel surfactants has been included in the new edition. Physicochemical phenomena such as self-assembly in solution, adsorption, gel formation and foaming are discussed in detail. Particular attention is paid to the solution behaviour of surfactants and polymers containing polyoxyethylene chains. Surface active polymers are presented and their interaction with surfactants is a core topic of the book. Protein-surfactant interaction is also important and a new chapter deals with this issue. Microemulsions are treated in depth and several important application such as detergency and their use as media for chemical reactions are presented. Emulsions and the choice of emulsifier is discussed in some detail. The new edition also contains chapters on rheology and wetting. Surfactants and Polymers in Aqueous Solution is aimed at those dealing with surface chemistry research at universities and with surfactant formulation in industry.
Download or read book Green Adhesives written by Inamuddin and published by John Wiley & Sons. This book was released on 2020-06-03 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Green Adhesives: Preparation, Properties and Applications deals with the fabrication methods, characterization, and applications of green adhesives. It also includes the collective properties of waterborne, bio, and wound-healing green adhesives. Exclusive attention is devoted to discussing the applications of green adhesives in biomedical coatings, food, and industrial applications.
Download or read book Drug Delivery Aspects written by Ranjita Shegokar and published by Elsevier. This book was released on 2020-03-30 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drug Delivery Aspects reviews additional features of drug delivery systems, along with the standard formulation development, like preclinical testing, conversion into solid dosage forms, roles of excipients and polymers used on stability and sterile processing. There is a focus on formulation engineering and related large scale (GMP) manufacturing, regulatory, and functional aspects of drug delivery systems. A detailed discussion on biologics and vaccines gives insights to readers on new developments in this direction. The series Expectations and Realities of Multifunctional Drug Delivery Systems examines the fabrication, optimization, biological aspects, regulatory and clinical success of wide range of drug delivery carriers. This series reviews multifunctionality and applications of drug delivery systems, industrial trends, regulatory challenges and in vivo success stories. Throughout the volumes discussions on diverse aspects of drug delivery carriers, such as clinical, engineering, and regulatory, facilitate insight sharing across expertise area and form a link for collaborations between industry-academic scientists and clinical researchers. Expectations and Realities of Multifunctional Drug Delivery Systems connects formulation scientists, regulatory experts, engineers, clinical experts and regulatory stake holders. The wide scope of the book ensures it as a valuable reference resource for researchers in both academia and the pharmaceutical industry who want to learn more about drug delivery systems.
