Download or read book An Introduction to the Approximation of Functions written by Theodore J. Rivlin and published by Courier Corporation. This book was released on 1981-01-01 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematics of Computing -- Numerical Analysis.
Download or read book Functional Analysis Approximation Theory and Numerical Analysis written by John Michael Rassias and published by World Scientific. This book was released on 1994 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book consists of papers written by outstanding mathematicians. It deals with both theoretical and applied aspects of the mathematical contributions of BANACH, ULAM, and OSTROWSKI, which broaden the horizons of Functional Analysis, Approximation Theory, and Numerical Analysis in accordance with contemporary mathematical standards.
Download or read book Approximation Theory and Methods written by M. J. D. Powell and published by Cambridge University Press. This book was released on 1981-03-31 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most functions that occur in mathematics cannot be used directly in computer calculations. Instead they are approximated by manageable functions such as polynomials and piecewise polynomials. The general theory of the subject and its application to polynomial approximation are classical, but piecewise polynomials have become far more useful during the last twenty years. Thus many important theoretical properties have been found recently and many new techniques for the automatic calculation of approximations to prescribed accuracy have been developed. This book gives a thorough and coherent introduction to the theory that is the basis of current approximation methods. Professor Powell describes and analyses the main techniques of calculation supplying sufficient motivation throughout the book to make it accessible to scientists and engineers who require approximation methods for practical needs. Because the book is based on a course of lectures to third-year undergraduates in mathematics at Cambridge University, sufficient attention is given to theory to make it highly suitable as a mathematical textbook at undergraduate or postgraduate level.
Download or read book Approximation Theory and Approximation Practice Extended Edition written by Lloyd N. Trefethen and published by SIAM. This book was released on 2019-01-01 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a textbook on classical polynomial and rational approximation theory for the twenty-first century. Aimed at advanced undergraduates and graduate students across all of applied mathematics, it uses MATLAB to teach the fields most important ideas and results. Approximation Theory and Approximation Practice, Extended Edition differs fundamentally from other works on approximation theory in a number of ways: its emphasis is on topics close to numerical algorithms; concepts are illustrated with Chebfun; and each chapter is a PUBLISHable MATLAB M-file, available online. The book centers on theorems and methods for analytic functions, which appear so often in applications, rather than on functions at the edge of discontinuity with their seductive theoretical challenges. Original sources are cited rather than textbooks, and each item in the bibliography is accompanied by an editorial comment. In addition, each chapter has a collection of exercises, which span a wide range from mathematical theory to Chebfun-based numerical experimentation. This textbook is appropriate for advanced undergraduate or graduate students who have an understanding of numerical analysis and complex analysis. It is also appropriate for seasoned mathematicians who use MATLAB.
Download or read book Approximation of Functions Theory and Numerical Methods written by Günter Meinardus and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: for example, the so-called Lp approximation, the Bernstein approxima tion problem (approximation on the real line by certain entire functions), and the highly interesting studies of J. L. WALSH on approximation in the complex plane. I would like to extend sincere thanks to Professor L. COLLATZ for his many encouragements for the writing of this book. Thanks are equally due to Springer-Verlag for their ready agreement to my wishes, and for the excellent and competent composition of the book. In addition, I would like to thank Dr. W. KRABS, Dr. A. -G. MEYER and D. SCHWEDT for their very careful reading of the manuscript. Hamburg, March 1964 GUNTER MEINARDUS Preface to the English Edition This English edition was translated by Dr. LARRY SCHUMAKER, Mathematics Research Center, United States Army, The University of Wisconsin, Madison, from a supplemented version of the German edition. Apart from a number of minor additions and corrections and a few new proofs (e. g. , the new proof of JACKSON'S Theorem), it differs in detail from the first edition by the inclusion of a discussion of new work on comparison theorems in the case of so-called regular Haar systems (§ 6) and on Segment Approximation (§ 11). I want to thank the many readers who provided comments and helpful suggestions. My special thanks are due to the translator, to Springer-Verlag for their ready compliance with all my wishes, to Mr.
Download or read book Numerical Approximation Methods written by Harold Cohen and published by Springer Science & Business Media. This book was released on 2011-09-28 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents numerical and other approximation techniques for solving various types of mathematical problems that cannot be solved analytically. In addition to well known methods, it contains some non-standard approximation techniques that are now formally collected as well as original methods developed by the author that do not appear in the literature. This book contains an extensive treatment of approximate solutions to various types of integral equations, a topic that is not often discussed in detail. There are detailed analyses of ordinary and partial differential equations and descriptions of methods for estimating the values of integrals that are presented in a level of detail that will suggest techniques that will be useful for developing methods for approximating solutions to problems outside of this text. The book is intended for researchers who must approximate solutions to problems that cannot be solved analytically. It is also appropriate for students taking courses in numerical approximation techniques.
Download or read book Weighted Polynomial Approximation and Numerical Methods for Integral Equations written by Peter Junghanns and published by Birkhäuser. This book was released on 2022-08-13 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents a combination of two topics: one coming from the theory of approximation of functions and integrals by interpolation and quadrature, respectively, and the other from the numerical analysis of operator equations, in particular, of integral and related equations. The text focusses on interpolation and quadrature processes for functions defined on bounded and unbounded intervals and having certain singularities at the endpoints of the interval, as well as on numerical methods for Fredholm integral equations of first and second kind with smooth and weakly singular kernel functions, linear and nonlinear Cauchy singular integral equations, and hypersingular integral equations. The book includes both classic and very recent results and will appeal to graduate students and researchers who want to learn about the approximation of functions and the numerical solution of operator equations, in particular integral equations.
Download or read book Mathematical Analysis Approximation Theory and Their Applications written by Themistocles M. Rassias and published by Springer. This book was released on 2016-06-03 with total page 745 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed for graduate students, researchers, and engineers in mathematics, optimization, and economics, this self-contained volume presents theory, methods, and applications in mathematical analysis and approximation theory. Specific topics include: approximation of functions by linear positive operators with applications to computer aided geometric design, numerical analysis, optimization theory, and solutions of differential equations. Recent and significant developments in approximation theory, special functions and q-calculus along with their applications to mathematics, engineering, and social sciences are discussed and analyzed. Each chapter enriches the understanding of current research problems and theories in pure and applied research.
Download or read book Fourier Analysis and Approximation of Functions written by Roald M. Trigub and published by Springer Science & Business Media. This book was released on 2004-09-07 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Fourier Analysis and Approximation of Functions basics of classical Fourier Analysis are given as well as those of approximation by polynomials, splines and entire functions of exponential type. In Chapter 1 which has an introductory nature, theorems on convergence, in that or another sense, of integral operators are given. In Chapter 2 basic properties of simple and multiple Fourier series are discussed, while in Chapter 3 those of Fourier integrals are studied. The first three chapters as well as partially Chapter 4 and classical Wiener, Bochner, Bernstein, Khintchin, and Beurling theorems in Chapter 6 might be interesting and available to all familiar with fundamentals of integration theory and elements of Complex Analysis and Operator Theory. Applied mathematicians interested in harmonic analysis and/or numerical methods based on ideas of Approximation Theory are among them. In Chapters 6-11 very recent results are sometimes given in certain directions. Many of these results have never appeared as a book or certain consistent part of a book and can be found only in periodics; looking for them in numerous journals might be quite onerous, thus this book may work as a reference source. The methods used in the book are those of classical analysis, Fourier Analysis in finite-dimensional Euclidean space Diophantine Analysis, and random choice.
Download or read book Approximation of Functions written by Günter Meinardus and published by . This book was released on 1967 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Exact Constants in Approximation Theory written by Nikolaĭ Pavlovich Korneĭchuk and published by Cambridge University Press. This book was released on 1991-06-06 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended as a self-contained introduction for non-specialists, or as a reference work for experts, to the particular area of approximation theory that is concerned with exact constants. The results apply mainly to extremal problems in approximation theory, which in turn are closely related to numerical analysis and optimization. The book encompasses a wide range of questions and problems: best approximation by polynomials and splines; linear approximation methods, such as spline-approximation; optimal reconstruction of functions and linear functionals. Many of the results are based on deep facts from analysis and function theory, such as duality theory and comparison theorems; these are presented in chapters 1 and 3. In keeping with the author's intention to make the book as self-contained as possible, chapter 2 contains an introduction to polynomial and spline approximation. Chapters 4 to 7 apply the theory to specific classes of functions. The last chapter deals with n-widths and generalises some of the ideas of the earlier chapters. Each chapter concludes with commentary, exercises and extensions of results. A substantial bibliography is included. Many of the results collected here have not been gathered together in book form before, so it will be essential reading for approximation theorists.
Download or read book Rational Approximation of Real Functions written by P. P. Petrushev and published by Cambridge University Press. This book was released on 2011-03-03 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 1987 book examines the approximation of real functions by real rational functions. These are a more convenient tool than polynomials, and interest in them was growing, especially after D. Newman's work in the mid-sixties. The authors present the basic achievements of the subject and also discuss some topics from complex rational approximation.
Download or read book Numerical Methods for Special Functions written by Amparo Gil and published by SIAM. This book was released on 2007-01-01 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special functions arise in many problems of pure and applied mathematics, mathematical statistics, physics, and engineering. This book provides an up-to-date overview of numerical methods for computing special functions and discusses when to use these methods depending on the function and the range of parameters. Not only are standard and simple parameter domains considered, but methods valid for large and complex parameters are described as well. The first part of the book (basic methods) covers convergent and divergent series, Chebyshev expansions, numerical quadrature, and recurrence relations. Its focus is on the computation of special functions; however, it is suitable for general numerical courses. Pseudoalgorithms are given to help students write their own algorithms. In addition to these basic tools, the authors discuss other useful and efficient methods, such as methods for computing zeros of special functions, uniform asymptotic expansions, Padé approximations, and sequence transformations. The book also provides specific algorithms for computing several special functions (like Airy functions and parabolic cylinder functions, among others).
Download or read book Methods of Approximation Theory in Complex Analysis and Mathematical Physics written by Andrei A. Gonchar and published by Springer. This book was released on 2008-01-03 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book incorporates research papers and surveys written by participants ofan International Scientific Programme on Approximation Theory jointly supervised by Institute for Constructive Mathematics of University of South Florida at Tampa, USA and the Euler International Mathematical Instituteat St. Petersburg, Russia. The aim of the Programme was to present new developments in Constructive Approximation Theory. The topics of the papers are: asymptotic behaviour of orthogonal polynomials, rational approximation of classical functions, quadrature formulas, theory of n-widths, nonlinear approximation in Hardy algebras,numerical results on best polynomial approximations, wavelet analysis. FROM THE CONTENTS: E.A. Rakhmanov: Strong asymptotics for orthogonal polynomials associated with exponential weights on R.- A.L. Levin, E.B. Saff: Exact Convergence Rates for Best Lp Rational Approximation to the Signum Function and for Optimal Quadrature in Hp.- H. Stahl: Uniform Rational Approximation of x .- M. Rahman, S.K. Suslov: Classical Biorthogonal Rational Functions.- V.P. Havin, A. Presa Sague: Approximation properties of harmonic vector fields and differential forms.- O.G. Parfenov: Extremal problems for Blaschke products and N-widths.- A.J. Carpenter, R.S. Varga: Some Numerical Results on Best Uniform Polynomial Approximation of x on 0,1 .- J.S. Geronimo: Polynomials Orthogonal on the Unit Circle with Random Recurrence Coefficients.- S. Khrushchev: Parameters of orthogonal polynomials.- V.N. Temlyakov: The universality of the Fibonacci cubature formulas.
Download or read book Numerical Approximation of Partial Differential Equations written by Alfio Quarteroni and published by Springer Science & Business Media. This book was released on 2009-02-11 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: Everything is more simple than one thinks but at the same time more complex than one can understand Johann Wolfgang von Goethe To reach the point that is unknown to you, you must take the road that is unknown to you St. John of the Cross This is a book on the numerical approximation ofpartial differential equations (PDEs). Its scope is to provide a thorough illustration of numerical methods (especially those stemming from the variational formulation of PDEs), carry out their stability and convergence analysis, derive error bounds, and discuss the algorithmic aspects relative to their implementation. A sound balancing of theoretical analysis, description of algorithms and discussion of applications is our primary concern. Many kinds of problems are addressed: linear and nonlinear, steady and time-dependent, having either smooth or non-smooth solutions. Besides model equations, we consider a number of (initial-) boundary value problems of interest in several fields of applications. Part I is devoted to the description and analysis of general numerical methods for the discretization of partial differential equations. A comprehensive theory of Galerkin methods and its variants (Petrov Galerkin and generalized Galerkin), as wellas ofcollocationmethods, is devel oped for the spatial discretization. This theory is then specified to two numer ical subspace realizations of remarkable interest: the finite element method (conforming, non-conforming, mixed, hybrid) and the spectral method (Leg endre and Chebyshev expansion).
Download or read book Splines and PDEs From Approximation Theory to Numerical Linear Algebra written by Angela Kunoth and published by Springer. This book was released on 2018-09-20 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book takes readers on a multi-perspective tour through state-of-the-art mathematical developments related to the numerical treatment of PDEs based on splines, and in particular isogeometric methods. A wide variety of research topics are covered, ranging from approximation theory to structured numerical linear algebra. More precisely, the book provides (i) a self-contained introduction to B-splines, with special focus on approximation and hierarchical refinement, (ii) a broad survey of numerical schemes for control problems based on B-splines and B-spline-type wavelets, (iii) an exhaustive description of methods for computing and analyzing the spectral distribution of discretization matrices, and (iv) a detailed overview of the mathematical and implementational aspects of isogeometric analysis. The text is the outcome of a C.I.M.E. summer school held in Cetraro (Italy), July 2017, featuring four prominent lecturers with different theoretical and application perspectives. The book may serve both as a reference and an entry point into further research.
Download or read book Computer Aided Geometric Design written by Robert E. Barnhill and published by Academic Press. This book was released on 2014-05-10 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer Aided Geometric Design covers the proceedings of the First International Conference on Computer Aided Geometric Design, held at the University of Utah on March 18-21, 1974. This book is composed of 15 chapters and starts with reviews of the properties of surface patch equation and the use of computers in geometrical design. The next chapters deal with the principles of smooth interpolation over triangles and without twist constraints, as well as the graphical representation of surfaces over triangles and rectangles. These topics are followed by discussions of the B-spline curves and surfaces; mathematical and practical possibilities of UNISURF; nonlinear splines; and some piecewise polynomial alternatives to splines under tension. Other chapters explore the smooth parametric surfaces, the space curve as a folded edge, and the interactive computer graphics application of the parametric bi-cubic surface to engineering design problems. The final chapters look into the three-dimensional human-machine communication and a class of local interpolating splines. This book will prove useful to design engineers.
