Download or read book Approximate Boundary Conditions in Electromagnetics written by Thomas B. A. Senior and published by IET. This book was released on 1995 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprehensively describes a variety of methods for the approximate simulation of material surfaces.
Download or read book Impedance Boundary Conditions In Electromagnetics written by Daniel J. Hoppe and published by CRC Press. This book was released on 2018-10-08 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electromagnetic scattering from complex objects has been an area of in-depth research for many years. A variety of solution methodologies have been developed and utilised for the solution of ever increasingly complex problems. Among these methodologies, the subject of impedance boundary conditions has interested the authors for some time. In short, impedance boundary conditions allow one to replace a complex structure with an appropriate impedance relationship between the electric and magnetic fields on the surface of the object. This simplifies the solution of the problem considerably, allowing one to ignore the complexity of the internal structure beneath the surface. This book examines impedance boundary conditions in electromagnetics. The introductory chapter provides a presentation of the role of the impedance boundary conditions in solving practical electromagnetic problems and some historical background. One of the main objectives of this book is to present a unified and thorough discussion of this important subject. A method based on a spectral domain approach is presented to derive the Higher Order Impedance Boundary Conditions (HOIBC). The method includes all of the existing approximate boundary conditions, such as the Standard Impedence Boundary Condition, the Tensor Impedence Boundary Condition and the Generalised Impedance Boundary Conditions, as special cases. The special domain approach is applicable to complex coatings and surface treatments as well as simple dielectric coatings. The spectral domain approach is employed to determine the appropriate boundary conditions for planar dielectric coatings, chiral coatings and corregated conductors. The accuracy of the proposal boundary conditions is discussed. The approach is then extended to include the effects of curvature and is applied to curved dielectric and chiral coatings. Numerical data is presented to critically assess the accuracy of the results obtained using various forms of the impedence boundary conditions. A number of appendices that provide more detail on some of the topics addressed in the main body of the book and a selective list of references directly related to the topics addressed in this book are also included.
Download or read book Surface Impedance Boundary Conditions written by Sergey V. Yuferev and published by CRC Press. This book was released on 2018-09-03 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface Impedance Boundary Conditions is perhaps the first effort to formalize the concept of SIBC or to extend it to higher orders by providing a comprehensive, consistent, and thorough approach to the subject. The product of nearly 12 years of research on surface impedance, this book takes the mystery out of the largely overlooked SIBC. It provides an understanding that will help practitioners select, use, and develop these efficient modeling tools for their own applications. Use of SIBC has often been viewed as an esoteric issue, and they have been applied in a very limited way, incorporated in computation as an ad hoc means of simplifying the treatment for specific problems. Apply a Surface Impedance "Toolbox" to Develop SIBCs for Any Application The book not only outlines the need for SIBC but also offers a simple, systematic method for constructing SIBC of any order based on a perturbation approach. The formulation of the SIBC within common numerical techniques—such as the boundary integral equations method, the finite element method, and the finite difference method—is discussed in detail and elucidated with specific examples. Since SIBC are often shunned because their implementation usually requires extensive modification of existing software, the authors have mitigated this problem by developing SIBCs, which can be incorporated within existing software without system modification. The authors also present: Conditions of applicability, and errors to be expected from SIBC inclusion Analysis of theoretical arguments and mathematical relationships Well-known numerical techniques and formulations of SIBC A practical set of guidelines for evaluating SIBC feasibility and maximum errors their use will produce A careful mix of theory and practical aspects, this is an excellent tool to help anyone acquire a solid grasp of SIBC and maximize their implementation potential.
Download or read book Exact and Approximate Boundary Conditions in the Theory of Electromagnetic Wave Propagation written by G. N. Krylov and published by . This book was released on 1968 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: The paper deals with the methods of investigating waves propagated above the earth. Such a problem generally requires different degrees of approximation of conditions existing on the earth's surface. The present discussion is based on the assumption that the earth surface can be approximated as being flat. The Hertz vector is used for the solution of the problems relating to the theory of electromagnetic wave propagation. Two transformations relating the Hertz vector to vectros of electric and magnetic fields are given. A vertical electric dipole is located in space as the next step and the conditions of the interphase surfaces are then formulated. Construction of precise and approximate solutions is discussed for two locations of the dipole: one in the upper half-space and the other in the lower half-space. Two methods of selecting proper constants are reviewed. (Author).
Download or read book Boundary Conditions in Electromagnetics written by Ismo V. Lindell and published by John Wiley & Sons. This book was released on 2019-11-26 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive survey of boundary conditions as applied in antenna and microwave engineering, material physics, optics, and general electromagnetics research. Boundary conditions are essential for determining electromagnetic problems. Working with engineering problems, they provide analytic assistance in mathematical handling of electromagnetic structures, and offer synthetic help for designing new electromagnetic structures. Boundary Conditions in Electromagnetics describes the most-general boundary conditions restricted by linearity and locality, and analyzes basic plane-wave reflection and matching problems associated to a planar boundary in a simple-isotropic medium. This comprehensive text first introduces known special cases of particular familiar forms of boundary conditions — perfect electromagnetic conductor, impedance, and DB boundaries — and then examines various general forms of boundary conditions. Subsequent chapters discuss sesquilinear boundary conditions and practical computations on wave scattering by objects defined by various boundary conditions. The practical applications of less-common boundary conditions, such as for metamaterial and metasurface engineering, are referred to throughout the text. This book: Describes the mathematical analysis of fields associated to given boundary conditions Provides examples of how boundary conditions affect the scattering properties of a particle Contains ample in-chapter exercises and solutions, complete references, and a detailed index Includes appendices containing electromagnetic formulas, Gibbsian 3D dyadics, and four-dimensional formalism Boundary Conditions in Electromagnetics is an authoritative text for electrical engineers and physicists working in electromagnetics research, graduate or post-graduate students studying electromagnetics, and advanced readers interested in electromagnetic theory.
Download or read book Electromagnetic Boundary Problems written by Edward F. Kuester and published by CRC Press. This book was released on 2015-10-28 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electromagnetic Boundary Problems introduces the formulation and solution of Maxwell's equations describing electromagnetism. Based on a one-semester graduate-level course taught by the authors, the text covers material parameters, equivalence principles, field and source (stream) potentials, and uniqueness, as well as:Provides analytical solutions
Download or read book Approximate Boundary Conditions for Thin Structures written by and published by . This book was released on 2008 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surface Electromagnetics written by Fan Yang and published by Cambridge University Press. This book was released on 2019-06-20 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by the leading experts in the field, this text provides systematic coverage of the theory, physics, functional designs, and engineering applications of advanced engineered electromagnetic surfaces. All the essential topics are included, from the fundamental theorems of surface electromagnetics, to analytical models, general sheet transmission conditions (GSTC), metasurface synthesis, and quasi-periodic analysis. A plethora of examples throughout illustrate the practical applications of surface electromagnetics, including gap waveguides, modulated metasurface antennas, transmit arrays, microwave imaging, cloaking, and orbital angular momentum (OAM ) beam generation, allowing readers to develop their own surface electromagnetics-based devices and systems. Enabling a fully comprehensive understanding of surface electromagnetics, this is an invaluable text for researchers, practising engineers and students working in electromagnetics antennas, metasurfaces and optics.
Download or read book Electromagnetic Field Near Conducting Half Space written by Yuriy Vasetsky and published by Springer Nature. This book was released on 2023-09-12 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is devoted to the solution of one general problem of the theory of a three-dimensional quasi-stationary sinusoidal and pulse electromagnetic field. These studies, unlike many well-known works, are based on obtained exact analytical solution of the problem for the field, generated by external current sources near the conducting body with plane surface. The solution for the vector and scalar potentials, electric and magnetic intensities in the dielectric and conducting media is found without restrictions on the configuration of current sources, properties of the media and field frequency. Some general properties of field formation for arbitrary field in the considered system are obtained (in particular, full compensation by the field of the electric charge distributed on the interface between the media, the normal component of the induced external electric field and, accordingly, the equality to zero the components both of the current density and the electric field intensity perpendicular to the interface; the non-uniform electromagnetic field decreases in depth of conducting medium faster than uniform field). It is shown that the exact analytical solution depends on the values of the parameter proportional to the ratio of the field penetration depth to the distance between the external field sources and the body. The concept of strong skin effect is extended to the case of small value of the introduced parameter. A significant simplification of the expressions was obtained as an asymptotic expansion on this small parameter. In the case of pulsed fields approximate method gives the highest accuracy during important initial period of pulse time. For asymptotic expansion the approximate impedance boundary condition is generalized to the diffusion of non-uniform field into conducting medium. The book is intended for the researchers, postgraduate students and students specialized in theory and calculations of electromagnetic fields.
Download or read book Numerical Analysis of Electromagnetic Fields written by Pei-bai Zhou and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical methods for solving boundary value problems have developed rapidly. Knowledge of these methods is important both for engineers and scientists. There are many books published that deal with various approximate methods such as the finite element method, the boundary element method and so on. However, there is no textbook that includes all of these methods. This book is intended to fill this gap. The book is designed to be suitable for graduate students in engineering science, for senior undergraduate students as well as for scientists and engineers who are interested in electromagnetic fields. Objective Numerical calculation is the combination of mathematical methods and field theory. A great number of mathematical concepts, principles and techniques are discussed and many computational techniques are considered in dealing with practical problems. The purpose of this book is to provide students with a solid background in numerical analysis of the field problems. The book emphasizes the basic theories and universal principles of different numerical methods and describes why and how different methods work. Readers will then understand any methods which have not been introduced and will be able to develop their own new methods. Organization Many of the most important numerical methods are covered in this book. All of these are discussed and compared with each other so that the reader has a clear picture of their particular advantage, disadvantage and the relation between each of them. The book is divided into four parts and twelve chapters.
Download or read book Finite Element Method Electromagnetics written by John L. Volakis and published by John Wiley & Sons. This book was released on 1998-06-15 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Employed in a large number of commercial electromagnetic simulation packages, the finite element method is one of the most popular and well-established numerical techniques in engineering. This book covers the theory, development, implementation, and application of the finite element method and its hybrid versions to electromagnetics. FINITE ELEMENT METHOD FOR ELECTROMAGNETICS begins with a step-by-step textbook presentation of the finite method and its variations then goes on to provide up-to-date coverage of three dimensional formulations and modern applications to open and closed domain problems. Worked out examples are included to aid the reader with the fine features of the method and the implementation of its hybridization with other techniques for a robust simulation of large scale radiation and scattering. The crucial treatment of local boundary conditions is carefully worked out in several stages in the book. Sponsored by: IEEE Antennas and Propagation Society.
Download or read book Engineering Electromagnetics written by Nathan Ida and published by Springer. This book was released on 2015-03-20 with total page 1062 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides students with a thorough theoretical understanding of electromagnetic field equations and it also treats a large number of applications. The text is a comprehensive two-semester textbook. The work treats most topics in two steps – a short, introductory chapter followed by a second chapter with in-depth extensive treatment; between 10 to 30 applications per topic; examples and exercises throughout the book; experiments, problems and summaries. The new edition includes: modifications to about 30-40% of the end of chapter problems; a new introduction to electromagnetics based on behavior of charges; a new section on units; MATLAB tools for solution of problems and demonstration of subjects; most chapters include a summary. The book is an undergraduate textbook at the Junior level, intended for required classes in electromagnetics. It is written in simple terms with all details of derivations included and all steps in solutions listed. It requires little beyond basic calculus and can be used for self-study. The wealth of examples and alternative explanations makes it very approachable by students. More than 400 examples and exercises, exercising every topic in the book Includes 600 end-of-chapter problems, many of them applications or simplified applications Discusses the finite element, finite difference and method of moments in a dedicated chapter
Download or read book Electromagnetic Fields written by István Vágó and published by Akademiai Kiads. This book was released on 1998 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The book is primarily aimed at experts working in electrical engineering and physics and intends to give an overview of the theory of electromagnetic fields and of the basic principles of their analytical and numerical analysis."--BOOK JACKET.Title Summary field provided by Blackwell North America, Inc. All Rights Reserved
Download or read book Analytical Modeling in Applied Electromagnetics written by Sergei Tretyakov and published by Artech House. This book was released on 2003 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analytical Modeling in Applied Electromagnets encompasses the most complete treatment on the subject published to date, focusing on the nature of models in radio engineering. This leading-edge resource brings you detailed coverage of the latest topics, including metamaterials, photonic bandgaps and artificial impedance surfaces, and applies these concepts to a wide range of applications. The book provides you with working examples that are mainly directed to antenna applications, but the modeling methods and results can be used for other practical devices as well.
Download or read book Electromagnetics and Calculation of Fields written by Nathan Ida and published by Springer Science & Business Media. This book was released on 2013-03-07 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introduction to electromagnetic fields emphasizes the computation of fields and the development of theoretical relations. It presents the electromagnetic field and Maxwell's equations with a view toward connecting the disparate applications to the underlying relations, along with computational methods of solving the equations.
Download or read book Dynamic Electromagnetics written by Paul Diament and published by . This book was released on 2000 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawn from the author's decades of experience teaching the subject, Dynamic Electromagnetics offers a uniquely accessible approach to a discipline often viewed as complicated and mysterious. The text addresses the key principles with extensive problems and examples and provides comprehensive coverage without overwhelming the student with advanced math.Gauss's Law, Surface Integrals, and Electric Fields, Ampère's Law, Line Integrals, and Magnetic Fields, Emf, Field Dynamics, and Maxwell's Equations, Maxwell's Equations and Quasistatic Analysis, Transmission Lines, Time Delay, and Wave Propagation, Steady-State Wave Transmission and Plane Waves, Impedance Matching Techniques and Oblique Waves, Poynting Theorems and Lossy Transmission Lines, Waveguiding and Radiating Structures.For individuals interested in an accessible approach to Electromagnetics.
Download or read book Electromagnetic Fields and Waves written by Eugene I. Nefyodov and published by Springer. This book was released on 2018-08-27 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is intended for a course in electromagnetism for upper undergraduate and graduate students. The main concepts and laws of classical macroscopic electrodynamics and initial information about generalized laws of modern electromagnetics are discussed, explaining some paradoxes of the modern theory. The reader then gets acquainted with electrodynamics methods of field analysis on the basis of wave equation solution. Emission physics are considered using an example of the Huygens-Fresnel-Kirchhoff canonic principle. The representation about strict electrodynamics task statement on the base of Maxwell equations, boundary conditions, emission conditions and the condition on the edge is given. Different classes of approximate boundary conditions are presented, which essentially simplify understanding of process physics. The canonic Fresnel functions are given and their generalization on the case of anisotropic impedance. The free waves in closed waveguides and in strip-slotted and edge-dielectric transmission lines are described. A large number of Mathcad programs for illustration of field patterns and its properties in different guiding structures are provided. The material is organized for self-study as well as classroom use.