Download or read book Applied Stress Analysis of Plastics written by S.I. Krishnamachari and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a product of the understanding I developed of stress analysis applied to plastics, while at work at L. J. Broutman and Associates (UBA) and as a lecturer in the seminars on this topic co-sponsored by UBA and Society of Plastics Engineers. I believe that by its extent and level of treatment, this book would serve as an easy-to-read desktop reference for professionals, as well as a text book at the junior or senior level in undergraduate programs. The main theme of this book is what to do with computed stress. To approach the theme effectively, I have taken the "stress category ap proach" to stress analysis. Such an approach is being successfully used in the nuclear power field. In plastics, this approach helps in the prediction of long term behavior of structures. To maintain interest I have limited derivations and proofs to a minimum, and provided them, if at all, as flow charts. In this way, I believe that one can see better the connection between the variables, assumptions, and mathematics.
Download or read book Environmental Stress Cracking of Plastics written by D. C. Wright and published by iSmithers Rapra Publishing. This book was released on 1996 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simultaneous action of stress and strain on plastics in contact with specific fluids causes the onset of cracking and embrittlement of plastic known as environmental stress cracking. Since this is responsible for 15% of all failures of plastics components, environmental stress cracking has long been the subject of intensive research. This volume reviews factors that influence environmental stress cracking, and the state of knowledge regarding many families of plastics. Various types of damage, from disfiguring to catastrophic, are discussed in this volume, with the period of time over which the damage occurs. Plastics designers and specifiers will benefit from the wealth of information and data provided.
Download or read book Time Dependent and Nonlinear Effects in Polymers and Composites written by Richard Allan Schapery and published by ASTM International. This book was released on 2000 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Improved reliability in commercial and military applications requires improved understanding of and predictive models for the time- dependent and nonlinear mechanical behavior of polymeric composites. The May 1998 American Society for Testing and Materials symposium sought to fuse the efforts in this direction of specialists in polymers and composites; these 18 papers are therefore grouped under the subheadings of polymers and composites. Primary polymer topics are chemical and physical aging, nonlinear viscoelasticity, and viscoplasticity. Composites' issues include: the effect of physical aging on time-dependent behavior, multiaxial nonlinear effects, compressive behavior, nonlinear viscoelasticity and viscoplasticity, failure mechanisms, hygrothermal effects, durability, and accelerated strength testing. Schapery is affiliated with the U. of Texas at Austin, and Sun is at Purdue U. Annotation copyrighted by Book News, Inc., Portland, OR.
Download or read book Plastic Bending Theory And Applications written by T X Yu and published by World Scientific. This book was released on 1996-03-20 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the point of view of mechanics, this monograph systematically demonstrates the theory of plastic bending and its engineering applications; most of the contents of the book are based on the authors' research in the past decade. The monograph not only expounds the contributions of the authors to the fundamental theory of plastic bending, but also presents various applications of the theory in sheet metal forming, particularly in the analysis and prediction of springback and wrinkling of strips and plates subjected to bending or stamping. In addition to theoretical modelling, attention has also been paid to the development of related numerical methods; comparisons with experimental results are also presented.
Download or read book Some applications of elastic plastic stress analysis to fracture mechanics written by David James Hayes and published by . This book was released on 1970 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stress Analysis in Elastic plastic Structures written by William Prager and published by . This book was released on 1949 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Characterization and Analysis of Polymers written by Wiley and published by John Wiley & Sons. This book was released on 2008-02-08 with total page 987 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on Wiley's renowned Encyclopedia of Polymer Science and Technology, this book provides coverage of key methods of characterization of the physical and chemical properties of polymers, including atomic force microscopy, chromatographic methods, laser light scattering, nuclear magnetic resonance, and thermal analysis, among others. Written by prominent scholars from around the world, this reference presents over twenty-five self -contained articles on the most used analytical techniques currently practiced in polymer science.
Download or read book Engineering Design Basis for Plastics Products written by F. J. Lockett and published by . This book was released on 1982 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Plastics Testing and Failure Analysis written by Vishu Shah and published by John Wiley & Sons. This book was released on 2007-02-26 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written in easy-to-read and -use format, this book updates and revises its bestselling predecessor to become the most complete, comprehensive resource on plastics testing. This book has an emphasis on significance of test methods and interpretation of results. The book covers all aspects of plastics testing, failure analysis, and quality assurance - including chapters on identification analysis, failure analysis, and case studies. The book concludes with a substantial appendix with useful data, charts and tables for ready reference. Note: CD-ROM/DVD and other supplementary materials are not included as part of eBook file.
Download or read book Dynamic Mechanical Analysis written by Kevin P. Menard and published by CRC Press. This book was released on 2002-01-01 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although dynamical mechanical analysis or spectroscopy has left the domain of the rheologist and has become a prevalent tool in the analytical laboratory, it is still common to hear, "What is DMA, and what will it tell me?" or "I think I could use a DMA, but I cannot justify its cost." Previously, the novice in the field had to sort through texts on thermal analysis, rheology, and materials science just to find basic information — until now.
Download or read book Structural Analysis of Thermoplastic Components written by Gerald G. Trantina and published by McGraw Hill Professional. This book was released on 1994 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: How to predict thermoplastics behavior in high-performance structural applications Here's the very first engineering resource with all the data and design/analysis techniques you need to work with even the newest thermoplastics. Structural Analysis of Thermoplastic Components by Gerry Trantina and Ron Nimmer shows you how to predict stiffness, creep and fatigue of polymeric components--PLUS non-homogeneous materials such as structural foams and composites. You'll benefit from detailed comparisons of analytic prediction versus measured behavior and much more: Nonstandard property measurement and analysis; Nonlinearities associated with large deformations; Using structural geometry to offset low material stiffness; Designing thermoplastics to withstand impacts; Important loading variables, component lifetimes, frequency effects, hysteric heating and cyclic crack growth.
Download or read book Plastics Technology Handbook Fourth Edition written by Manas Chanda and published by CRC Press. This book was released on 2006-12-19 with total page 890 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because the field of plastics is one of the fastest changing areas today, the need arises to offer relevant, comprehensive material on polymers. An established source of information on modern plastics, the Plastics Technology Handbook continues to provide up-to-date coverage on the properties, processing methods, and applications of polymers. Retaining the easy-to-follow structure of the previous editions, this fourth edition includes new topics of interest that reflect recent developments and lead to better insights into the molecular behavior of polymers. New to the Fourth Edition Advances in supramolecular polymerization, flame retardancy, polymer-based nanomedicines, and drug delivery The new concept of oxo-biodegradable polymers Broadened discussion on plastic foams and foam extrusion processes More information on the processing and applications of industrial polymers, including the emerging field of nanoblends Developments in polymer synthesis and applications, such as polymeric sensors, hydrogels and smart polymers, hyperbranched polymers, shape memory polymers, polymeric optical fibers, scavenger resins, polymer nanocomposites, polymerization-filled composites, and wood-polymer composites A state-of-the-art account of the various available methods for plastics recycling Advances in the use of polymers in packaging, construction, the automotive and aerospace industries, agriculture, electronics and electrical technology, biomedical applications, corrosion prevention, and sports and marine applications Plastics Technology Handbook, Fourth Edition thoroughly covers traditional industrial polymers and their processing methods as well as contemporary polymeric materials, recent trends, and the latest applications.
Download or read book Plastics Technology Handbook Third Edition written by Manas Chanda and published by CRC Press. This book was released on 1998-04-10 with total page 1310 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Completely updated and enlarged to reflect the advances that have taken place since the publication of the Second Edition. Third Edition offers concise examinations of the chemical nature, characteristic properties, and uses of traditional industrial polymers, such as acrylics, polyolefins, vinyl polymers, polyesters, epoxies, and silicones, among others."
Download or read book Plastics Technology Handbook written by Manas Chanda and published by CRC Press. This book was released on 2017-11-07 with total page 1012 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated throughout to reflect advances over the last decade, the Fifth Edition continues the handbook’s tradition of authoritative coverage of fundamentals, production methods, properties, and applications of plastics and polymer-based materials. It covers tooling for plastics fabrication processes, thermoplastics, thermosetting plastics, foamed plastics, reinforced plastics, plastisols, and new developments in mold design. It also discusses rubber compounding and processing technologies. More recent developments in polymer fabrication and processing, including electrospinning, electrografted coating, polymer-metal hybrid joining, flex printing, and rapid prototyping/ 3D printing, are also presented. The handbook highlights advanced materials including natural and synthetic gfnanosize polymers, their unusual properties, and innovative applications, as well as polymer-carbon nanocomposites, graphene-based polymer nanocomposites, smart healable polymer composites, smart polymer coatings, electroactive polymers, polymer nanomaterials, and novel nano-/microfibrillar polymer composites. It offers updates on polymer solar battery development, plastics recycling and disposal methods, new concepts of "upcycling" and single-polymer composites, renewable synthetic polymers, biodegradable plastics and composites, and toxicity of plastics. The book also provides an overview of new developments in polymer applications in various fields including packaging, building and construction, corrosion prevention and control, automotive, aerospace applications, electrical and electronic applications, agriculture and horticulture, domestic appliances and business machines, medical and biomedical applications, marine and offshore applications, and sports.
Download or read book Concise Encyclopedia of Plastics written by Marlene G. Rosato and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: After over a century of worldwide production of all kinds trol persons, cost estimators, buyers, vendors, consultants, of products, the plastics industry is now the fourth largest and others. industry in the United States. This brief, concise, and prac The bulk of the book is the alphabetical listing of en tical book is a cutting edge compendium of the plastics tries. Preceding those entries is A Plastics Overview: Fig industry's information and terminology-ranging from ures and Tables (which presents eight summary guides on design, materials, and processes, to testing, quality control, the subjects examined in the text) and then the World of regulations, legal matters, and profitability. New and use Plastics Reviews (which presents 14 articles that provide ful developments in plastic materials and processing con general introductory information, comprehensive updates, tinually are on the horizon, and the examples of these de and important networking avenues within the world of velopments that are discussed in the book provide guides plastics). Following the alphabetical listing of entries, at the to past and future trends. end of the encyclopedia, seven appendices provide back This practical and comprehensive book reviews the ground and source guide information keyed to the text of the book. The extensive and useful Appendix A, List of plastics industry virtually from A to Z through its more than 25,000 entries. Its concise entries cover the basic is Abbreviations, lists all abbreviations used in the text.
Download or read book Deformation and Fracture Behaviour of Polymer Materials written by Wolfgang Grellmann and published by Springer. This book was released on 2017-07-12 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the most recent advances in the deformation and fracture behaviour of polymer material. It provides deeper insight into related morphology–property correlations of thermoplastics, elastomers and polymer resins. Each chapter of this book gives a comprehensive review of state-of-the-art methods of materials testing and diagnostics, tailored for plastic pipes, films and adhesive systems as well as elastomeric components and others. The investigation of deformation and fracture behaviour using the experimental methods of fracture mechanics has been the subject of intense research during the last decade. In a systematic manner, modern aspects of fracture mechanics in the industrial application of polymers for bridging basic research and industrial development are illustrated by multifarious examples of innovative materials usage. This book will be of value to scientists, engineers and in polymer materials science.
Download or read book Toughened Plastics written by C. Bucknall and published by Springer. This book was released on 2013-12-19 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: