Download or read book Applied Geophysics for Geologists and Engineers written by D. H. Griffiths and published by Elsevier. This book was released on 2013-10-22 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the fundamentals of all currently used methods (seismic, electrical, electromagnetic, gravity, magnetic, borehole logging and remote sensing) and pays special attention to the seismic refraction and electrical resistivity techniques which are the ones most commonly used in engineering and groundwater geophysics. The main changes in this new edition of Applied Geophysics for Engineers and Geologists, apart from a general updating, and conversion to SI units, is a more extensive treatment of electromagnetic and induced polarisation methods, and of geophysical borehole logging. The seismic reflection method is also treated more fully in view of its great importance in petroleum prospecting. Problems, with answers are also included. Taken together, the changes are so great that this is virtually a new book, as is suggested by the change in title
Download or read book Applied Geophysics for Geologists and Engineers written by Donald Harrison Griffiths and published by . This book was released on 2000 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Geophysics for Geologists and Engineers written by Donald Harrison Griffiths and published by . This book was released on 1965 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Geophysics for Engineers and Geologists written by D. H.K. Griffiths and published by . This book was released on 1975 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Geophysics in Hydrogeological and Engineering Practice written by W.E. Kelly and published by Elsevier. This book was released on 1993-01-28 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering geology and hydrogeology are applied sciences which utilize other applied sciences such as geophysics to solve practical problems. The book is written in the monograph format with seven chapters. The first chapter introduces the engineering and hydrogeological tasks to be discussed in the book. Relations between the physical, geomechanical and hydrogeological parameters are discussed in chapters three and five. Methods for field measurements and interpretation of field data are discussed in chapters four and six. Some special methods not routinely used in current practice are discussed in chapter seven. To illustrate and analyze the various applications, the authors have drawn from the extensive literature including many studies not previously described in english texts. Theoretical analyzes are supplemented by numerous examples.This book is addressed to university students of geology especially engineering geology and hydrogeology, geophysics and earth sciences, and post graduate, reseachers, and practising engineering geologists, geotechnical engineers, and hydrogeologists.
Download or read book Applied Geophysics for engineers and geologists written by Donald Harisson Griffiths and published by . This book was released on 1969 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Geophysics for Engineers and Geologists written by Donald Harrison Griffiths and published by . This book was released on 1965 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book APPLIED GEOPHYSICS FOR GEOLOGISTS AND ENGINEERS 2 ED written by DONALD HARRISON. GRIFFITHS and published by . This book was released on 1981 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Geophysics for Engineers and Geologists With Illustrations written by Donald Harrison GRIFFITHS (and KING (Roy Favell)) and published by . This book was released on 1965 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Geophysics for Geologists Engineers written by King Griffiths and published by . This book was released on 1981 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Manual of Applied Geology for Engineers written by Institution of Civil Engineers (Great Britain) and published by Thomas Telford. This book was released on 1976 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: All engineering structures react with the ground, and most structures make use of materials extracted from the earth. While an engineer cannot be expected to be also an expert geologist, he must have a working knowledge of the subject if his structures are to be economically designed, safely built and safely used. He must also be able to recognise where and when he needs the advice of a specialist. A Manual of Applied Geology is designed as a guide for practising engineers. A team of distinguished engineers and scientists has been assembled to present the basic information which an engineer needs and to explain how best to use this information to deal with problems in his work. Chaptes cover general theory, Formation of rocks, their properties and identification, landforms and soils, geophysical methods, maps and other information sources. the particular problems of terrain evaluation, site selection and investigation and common construction problems (including groundwater control, stability, foundations and underground work) are examined and there are chapters on materials and hydrogeology.Aimed principally at the engineer who is meeting geological problems in his everyday work, this generously illustrated volume will also be useful as an introduction to the subject for first degree engineering students
Download or read book Near Surface Applied Geophysics written by Mark E. Everett and published by Cambridge University Press. This book was released on 2013-04-25 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: Just a few meters below the Earth's surface lie features of great importance, from geological faults which can produce devastating earthquakes, to lost archaeological treasures. This refreshing, up-to-date book explores the foundations of interpretation theory and the latest developments in near-surface techniques, used to complement traditional geophysical methods for deep-exploration targets. Clear but rigorous, the book explains theory and practice in simple physical terms, supported by intermediate-level mathematics. Techniques covered include magnetics, resistivity, seismic reflection and refraction, surface waves, induced polarization, self-potential, electromagnetic induction, ground-penetrating radar, magnetic resonance, interferometry, seismoelectric and more. Sections on data analysis and inverse theory are provided and chapters are illustrated by case studies, giving students and professionals the tools to plan, conduct and analyze a near-surface geophysical survey. This is an important textbook for advanced-undergraduate and graduate students in geophysics and a valuable reference for practising geophysicists, geologists, hydrologists, archaeologists, and civil and geotechnical engineers.
Download or read book Applied Geophysics with Case Studies on Environmental Exploration and Engineering Geophysics written by Ali Ismet Kanlı and published by BoD – Books on Demand. This book was released on 2019-06-05 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a general introduction to the most important methods of applied geophysics with a variety of case studies. These methods represent a primary tool for investigation of the subsurface and are applicable to a very wide range of problems. Applied geophysics is based on physics principles that collect and interpret data on subsurface conditions for practical purposes, including oil and gas exploration, mineral prospecting, geothermal exploration, groundwater exploration, engineering applications, archeological interests, and environmental concerns. The depth of investigation into applied geophysics is shallow, typically from the ground surface to several kilometers deep, where economic, cultural, engineering, or environmental concerns often arise. Applied geophysics uses almost all of the current geophysical methods, including electrical, magnetic, electromagnetic, gravimetric, geothermal, seismic, seismoelectric, magnetotelluric, nuclear, and radioactive methods. In applied geophysics, geophysicists are usually required to have a good understanding of math and physics principles, knowledge of geology and computer skills, and hands-on experience of electronic instruments. A geophysicist's routine job includes survey designs, data acquisition, data processing, and data interpretation with detailed explanation of the study. Applied geophysics consists of three main subject and interest areas, which are exploration geophysics, engineering geophysics, and environmental geophysics.
Download or read book Geology Applied to Engineering written by Terry R. West and published by Waveland Press. This book was released on 2018-03-19 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geology Applied to Engineering bridges the gap between the two fields through its versatile application of the physical aspects of geology to engineering design and construction. The Second Edition elucidates real-world practices, concerns, and issues for today’s engineering geologists and geotechnical engineers. Both undergraduate and graduate students will benefit from the book’s thorough coverage, as will professionals involved in assessing sites for engineering projects, evaluating construction materials, developing water resources, and conducting tests using industry standards. West and Shakoor offer expanded coverage of important topics such as slope stability and ground subsidence and significant fields in engineering geology, such as highways, dams, tunnels, and rock blasting. In order to allow for the diverse backgrounds of geologists and engineers, material on the properties of minerals, rocks, and soil provides a working knowledge of applied geology as a springboard to more comprehensive subjects in engineering. Example problems throughout the text demonstrate the practical applications of soil mechanics, rock weathering and soils, structural geology, groundwater, and geophysics. Thought-provoking and challenging exercises supplement core concepts such as determining shear strength and failure conditions, calculating the depth needed for borings, reading and analyzing maps, and constructing stratigraphic cross sections.
Download or read book Applied Geophysics for Engineers and Geologists written by David Maurice Brink and published by . This book was released on 1965 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Geophysics for Engineers and Geologists By D H Griffiths and R F King written by Donald Harrison Griffiths and published by . This book was released on 1965 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Geophysics written by W. M. Telford and published by Cambridge University Press. This book was released on 1990-10-26 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the completely revised and updated version of the popular and highly regarded textbook, Applied Geophysics. It describes the physical methods involved in exploration for hydrocarbons and minerals, which include gravity, magnetic, seismic, electrical, electromagnetic, radioactivity, and well-logging methods. All aspects of these methods are described, including basic theory, field equipment, techniques of data acquisition, data processing and interpretation, with the objective of locating commercial deposits of minerals, oil, and gas and determining their extent. In the fourteen years or so since the first edition of Applied Geophysics, many changes have taken place in this field, mainly as the result of new techniques, better instrumentation, and increased use of computers in the field and in the interpretation of data. The authors describe these changes in considerable detail, including improved methods of solving the inverse problem, specialized seismic methods, magnetotellurics as a practical exploration method, time-domain electromagnetic methods, increased use of gamma-ray spectrometers, and improved well-logging methods and interpretation.
