Download or read book Mathematical Programming Methods in Structural Plasticity written by D. Lloyd Smith and published by Springer. This book was released on 2014-05-04 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: Civil engineering structures tend to be fabricated from materials that respond elastically at normal levels of loading. Most such materials, however, would exhibit a marked and ductile inelasticity if the structure were overloaded by accident or by some improbable but naturally occuring phenomeon. Indeed, the very presence of such ductility constitutes an important safety provision for large-scale constructions where human life is at risk. In the comprehensive evaluation of safety in structural design, it is therefore unrealistic not to consider the effects of ductility. This book sets out to show that the bringing together of the theory and methods of mathematical programming with the mathematical theory of plasticity furnishes a model which has a unifying theoretical nature and is entirely representative of observed structural behaviour. The contents of the book provide a review of the relevant aspects of mathematical programming and plasticity theory, together with a detailed presentation of the most interesting and potentially useful applications in both framed and continuum structures: ultimate strength and elastoplastic deformability; shakedown and practical upper bounds on deformation measures; evolutive dynamic response; large displacements and instability; stochastic and fuzzy programming for representing uncertainty in ultimate strength calculations. Besides providing a ready fund of computational algorithms, mathematical programming invests applications in mechanics with a refined mathematical formalism, rich in fundamental theorems, which often gives addi- tional insight into known results and occasionally lead to new ones. In addition to its obvious practical utility, the educational value of the material thoroughly befits a university discipline.
Download or read book Elements of Structural Optimization written by Raphael T. Haftka and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of structural optimization is still a relatively new field undergoing rapid changes in methods and focus. Until recently there was a severe imbalance between the enormous amount of literature on the subject, and the paucity of applications to practical design problems. This imbalance is being gradually redressed now. There is still no shortage of new publications, but there are also exciting applications of the methods of structural optimizations in the automotive, aerospace, civil engineering, machine design and other engineering fields. As a result of the growing pace of applications, research into structural optimization methods is increasingly driven by real-life problems. Most engineers who design structures employ complex general-purpose software packages for structural analysis. Often they do not have any access to the source the details of program, and even more frequently they have only scant knowledge of the structural analysis algorithms used in this software packages. Therefore the major challenge faced by researchers in structural optimization is to develop methods that are suitable for use with such software packages. Another major challenge is the high computational cost associated with the analysis of many complex real-life problems. In many cases the engineer who has the task of designing a structure cannot afford to analyze it more than a handful of times.
Download or read book Structural Design Applications of Mathematical Programming Techniques written by North Atlantic Treaty Organization. Advisory Group for Aerospace Research and Development. Structures and Materials Panel and published by . This book was released on 1971 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: The document describes the present state of development of the use of mathematical programming techniques in the optimum design of aerospace and similar structures. Although optimization with respect to cost is considered when possible, the main emphasis is on the minimization of weight, due to the overwhelming importance of this parameter in aerospace applications, and also due to the fact that it is one of the few merit functions that can be defined with reasonable precision. The use of mathematical programming techniques in the selection of materials is also discussed to the limited extent meaningful at the present time. (Author).
Download or read book Structural Seismic Design Optimization and Earthquake Engineering Formulations and Applications written by Plevris, Vagelis and published by IGI Global. This book was released on 2012-05-31 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Throughout the past few years, there has been extensive research done on structural design in terms of optimization methods or problem formulation. But, much of this attention has been on the linear elastic structural behavior, under static loading condition. Such a focus has left researchers scratching their heads as it has led to vulnerable structural configurations. What researchers have left out of the equation is the element of seismic loading. It is essential for researchers to take this into account in order to develop earthquake resistant real-world structures. Structural Seismic Design Optimization and Earthquake Engineering: Formulations and Applications focuses on the research around earthquake engineering, in particular, the field of implementation of optimization algorithms in earthquake engineering problems. Topics discussed within this book include, but are not limited to, simulation issues for the accurate prediction of the seismic response of structures, design optimization procedures, soft computing applications, and other important advancements in seismic analysis and design where optimization algorithms can be implemented. Readers will discover that this book provides relevant theoretical frameworks in order to enhance their learning on earthquake engineering as it deals with the latest research findings and their practical implementations, as well as new formulations and solutions.
Download or read book Modeling Solving and Application for Topology Optimization of Continuum Structures ICM Method Based on Step Function written by Yunkang Sui and published by Butterworth-Heinemann. This book was released on 2017-08-29 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modelling, Solving and Applications for Topology Optimization of Continuum Structures: ICM Method Based on Step Function provides an introduction to the history of structural optimization, along with a summary of the existing state-of-the-art research on topology optimization of continuum structures. It systematically introduces basic concepts and principles of ICM method, also including modeling and solutions to complex engineering problems with different constraints and boundary conditions. The book features many numerical examples that are solved by the ICM method, helping researchers and engineers solve their own problems on topology optimization. This valuable reference is ideal for researchers in structural optimization design, teachers and students in colleges and universities working, and majoring in, related engineering fields, and structural engineers. - Offers a comprehensive discussion that includes both the mathematical basis and establishment of optimization models - Centers on the application of ICM method in various situations with the introduction of easily coded software - Provides illustrations of a large number of examples to facilitate the applications of ICM method across a variety of disciplines
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Engineering Materials Structures and Systems Innovations Mechanics and Applications written by Alphose Zingoni and published by CRC Press. This book was released on 2019-08-21 with total page 2435 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications comprises 411 papers that were presented at SEMC 2019, the Seventh International Conference on Structural Engineering, Mechanics and Computation, held in Cape Town, South Africa, from 2 to 4 September 2019. The subject matter reflects the broad scope of SEMC conferences, and covers a wide variety of engineering materials (both traditional and innovative) and many types of structures. The many topics featured in these Proceedings can be classified into six broad categories that deal with: (i) the mechanics of materials and fluids (elasticity, plasticity, flow through porous media, fluid dynamics, fracture, fatigue, damage, delamination, corrosion, bond, creep, shrinkage, etc); (ii) the mechanics of structures and systems (structural dynamics, vibration, seismic response, soil-structure interaction, fluid-structure interaction, response to blast and impact, response to fire, structural stability, buckling, collapse behaviour); (iii) the numerical modelling and experimental testing of materials and structures (numerical methods, simulation techniques, multi-scale modelling, computational modelling, laboratory testing, field testing, experimental measurements); (iv) innovations and special structures (nanostructures, adaptive structures, smart structures, composite structures, bio-inspired structures, shell structures, membranes, space structures, lightweight structures, long-span structures, tall buildings, wind turbines, etc); (v) design in traditional engineering materials (steel, concrete, steel-concrete composite, aluminium, masonry, timber, glass); (vi) the process of structural engineering (conceptualisation, planning, analysis, design, optimization, construction, assembly, manufacture, testing, maintenance, monitoring, assessment, repair, strengthening, retrofitting, decommissioning). The SEMC 2019 Proceedings will be of interest to civil, structural, mechanical, marine and aerospace engineers. Researchers, developers, practitioners and academics in these disciplines will find them useful. Two versions of the papers are available. Short versions, intended to be concise but self-contained summaries of the full papers, are in this printed book. The full versions of the papers are in the e-book.
Download or read book University of Michigan Official Publication written by University of Michigan and published by UM Libraries. This book was released on 1989 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Each number is the catalogue of a specific school or college of the University.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1972 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Optimization written by Uri Kirsch and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book was developed while teaching a graduate course at several universities in the United States. Europe and Israel. during the last two decades. The purpose of the book is to introduce the fundamentals and applications of optimum structural design. Much work has been done in this area recently and many studies have been published. The book is an attempt to collect together selected topics of this literature and to present them in a unified approach. It meets the need for an introductory text covering the basic concepts of modem structural optimization. A previous book by the author on this subject ("Optimum Structural Design". published by McGraw-Hill New York in 1981 and by Maruzen Tokyo in 1983). has been used extensively as a text in many universities throughout the world. The present book reflects the rapid progress and recent developments in this area. A major difficulty in studying structural optimization is that integration of concepts used in several areas. such as structural analysis. numerical optimization and engineering design. is necessary in order to solve a specific problem. To facilitate the study of these topics. the book discusses in detail alternative problem formulations. the fundamentals of different optimization methods and various considerations related to structural design. The advantages and the limitations of the presented approaches are illustrated by numerous examples.
Download or read book Topics in Applied Mechanics written by J.F. Dijksman and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: In collaboration with the Contact Group Experimental Mechanics in The Netherlands and under the auspices of the Technological Institute of the Koninklijke Vlaamse Ingenieurs Vereniging (Royal Flemish Society of Engineers), the Department of Ap plied Mechanics of the Koninklijk Instituut van Ingenieurs (Royal Institution of Engineers in The Netherlands) organised the second National Mechanics Congress in The Netherlands, on November 16-18, 1992. About hundred participants from universities and industrial research laboratories in The Netherlands and Belgium discussed topics around the theme: Building Bridges, Integration of Theory and Applications in Applied Mechanics. Building bridges is of course one of the main tasks of a civil engineer, in order to improve the infrastructure of our society. Strength, stiffness and stability have to be guaranteed for a large number of years of service. Localised effects such as shear lag in longitudinal stiffeners, small cracks in concrete structures and effects of corrosion may on the long tenn lead to catastrofic failure of bridges. During the congress J.P. Gailliez presented a talk about the hydraulic ship lifts in the Canal du Centre in south Belgium. Built more than a hundred years ago, the elevators still are in a perfect condition and are recognized now as an industrial archeological monument.
Download or read book Annual Catalogue written by United States Air Force Academy and published by . This book was released on 1983 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book United States Air Force Academy written by United States Air Force Academy and published by . This book was released on 1983 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reliability based Structural Design written by Seung-Kyum Choi and published by Springer Science & Business Media. This book was released on 2006-11-15 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with an understanding of the fundamentals and applications of structural reliability, stochastic finite element method, reliability analysis via stochastic expansion, and optimization under uncertainty. It examines the use of stochastic expansions, including polynomial chaos expansion and Karhunen-Loeve expansion for the reliability analysis of practical engineering problems.
Download or read book Discretization Methods and Structural Optimization Procedures and Applications written by Hans A. Eschenauer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, the Finite Element Methods FEM were more and more employed in development and design departments as very fast working tools in order to determine stresses, deformations, eigenfrequencies etc. for all kinds of constructions under complex loading conditions. Meanwhile. very effective software systems have been developed by various research teams although some mathematical problems (e. g. convergence) have not been solved satisfac torily yet. In order to make further advances and to find a common language between mathe maticians and mechanicians the "Society for Applied Mathematics and Mechanics" (GAMM) agreed on the foundation of a special Committee: "Discretization Methods in Solid Mechanics" focussing on the following problems: - Structuring of various methods (displacement functions, hybrid and mixed approaches, etc. >, - Survey of approach functions (Lagrange-/Hermite-polynominals, Spline-functions), - Description of singularities, - Convergence and stability, - Practical and theoretical optimality to all mentioned issues (single and interacting). One of the basic aims of the GAMM-Committee is the interdisciplinary cooperation between mechanicians, mathematicians, and users which shall be intensified. Thus, on September 22, 1985 the committee decided to hold a seminar on "Structural Optimization" in order to allow an exchange of experiences and thoughts between the experts of finite element methods and those of structural optimization. A GAMM-seminar entitled "Discretization Methods and Structural Optimization - Procedures and Applications" was hold on October 5-7, 1988 at the Unversity of Siegen.
Download or read book NASA Technical Memorandum written by and published by . This book was released on 1994 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optimization Methods and Applications Possibilities and Limitations written by H.W. Bergmann and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of an International Seminar Organized by Deutsche Forschungsanstalt für Luft- und Raumfahrt (DLR) Bonn, June 1989
