Download or read book Applications of Organometallic Chemistry in the Preparation and Processing of Advanced Materials written by J.F. Harrod and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the ten years since the scientific rationale for the design, synthesis and application of inorganic and organometallic polymers (IOPs) was first conceptualised, we have witnessed the first tentative exploration of IOPs as precursors to new materials, with efforts focusing on the design and synthesis of novel ceramic precursors. Developing expertise led to precursor studies combined with the characterisation of the transformation processes that occur when IOPs are converted to ceramic materials. Now at maturity, the science presented in this volume reveals the polymer precursor approach to materials synthesis together with examples of processing ceramic shapes for a range of mechanical properties, the development of sophisticated, noninvasive analytical techniques, and IOP design rationales relying on well-defined processing-property relationships. The production of multifunctional IOPs is described, providing ion conductivity, gas sensing, bioactivity, magnetic properties, etc., combined with processability. The existence of well-defined IOPs and the exquisite control that can be exerted on sol-gel systems now provide access to such a variety of mixed organic-organometallic and/or inorganic hybrid systems that their exploitation is likely to develop into an entirely new field of materials chemistry. Future exciting avenues of research are also being opened up with the advent of buckyballs, Met-Cars, dopable preceramics, rigid-rod organometallics, and molecular tinkertoys.
Download or read book Science and Technology of Polymers and Advanced Materials written by Paras N. Prasad and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 859 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes the state ofthe art research presented at the Fourth International Conference on Frontiers of Polymersand Advanced Materialsheld in Cairo, Egypt in January 4-9, 1997. This conference follows the successful conferences held in Kuala Lumpur, Malaysia in 1995, in Jakarta, Indonesia in 1993 andin New Delhi, India in 1991. These conferences focussed on the most recent and important advances in a wide range of carefully chosen subject areas dealing with advanced materials, their science and technology and new business opportunities resulting from recent technological advances. As its predecessors, the conference held in Cairo was truly international with strong participation of 488 deiegales representing 37 countries from the USA and Egypt, as weil as Europe, South East Asia, Japan, South Africa and the Middle East. The conference was organized by the Egyptian Academy of Scientific Research and Technology, The Arab Society ofMaterials Science and the State University ofNew Y ork at Butfalo. The stated goals ofthe conference were: • To highlight advances and new. findings in the general area of polymers and advanced materials. - • T o foster global collaboration between the USA, Egypt and other nations in the general field of polymers and advanced materials. • To promote the development of scientific ilifrastructure in this field among the different participating countries, especially in the Middle East. • To create a basisforfuture long-term scientific exchanges between the USA and Egypt, and/or other countries.
Download or read book Green Synthetic Processes and Procedures written by Roberto Ballini and published by Royal Society of Chemistry. This book was released on 2019-06-28 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: The principles of Green Chemistry aim to improve the sustainability of chemical processes and reduce the generation of hazardous substances. There has been great growth in the field over the past few years and the number of research groups working in this area is still increasing. Now one of the biggest challenges is to embed the Green Chemistry ideals of safety and sustainability as standard, both in industry and academia. In order to do this, it is important to create resources that detail different applications and approaches. Green Synthetic Processes and Procedures brings together expert contributors from across a number of areas of green synthesis to cover a diverse array of subjects. Providing a thorough overview of the current green synthetic toolbox, from biocatalysis to sonochemistry, this book is a useful resource for any chemist wishing to design cleaner and safer processes.
Download or read book Sol Gel Materials written by John D. Wright and published by CRC Press. This book was released on 2000-12-21 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sol-Gel processing methods, first used historically for decorative and constructional materials, were extensively developed in the last century for applications such as glasses, ceramics, catalysts, coatings, composites and fibres. Today they are reaching their full potential, enabling the preparation of new generations of advanced materials not easily accessible by other methods yet using mild, low-energy conditions. The topic is therefore increasingly included in advanced undergraduate, MSc and PhD programmes in the areas of chemistry, physics and materials science. This concise introductory text, written at the advanced undergraduate/first-year postgraduate level, is also suitable as an introduction to the development, mechanisms, chemistry, characterisation methods and applications of the technique. It provides readers with an extensive yet concise grounding in the theory of each area of the subject and details the real and potential applications and the future prospects of sol-gel chemistry.
Download or read book Organometallic Polymers written by Charles E. Jr. Carraher and published by Elsevier. This book was released on 2012-12-02 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organometallic Polymers focuses on the synthesis, characterization, and potential applications of organometallic polymers. The discussion is organized around seven themes: vinyl polymerization of organometallic monomers; condensation polymerization of organometallic monomers; polymer-bound catalysts; applications of organotin polymers; developments in organosilicon polymers; phosphonitrile and sulfur nitride polymers; and coordination polymers. This book is comprised of 33 chapters and begins with a general review of polymerized vinyl monomers containing transition metals, as well as the reactivity of such monomers in addition to homo- and copolymerizations. The following chapters explore the participation of the ferrocene nucleus in the polymerization of vinylferrocene and its effect on polymer properties; thermomechanical transitions of ferrocene-containing polymers; photocrosslinkable organometallic polyesters; and supported catalysts for ethylene polymerization. The remaining sections discuss antifouling applications of various tin-containing organometallic polymers; structure and applications of polyphosphazenes and polymeric sulfur nitride; and coordination of inorganic ions to polymers. This monograph will be a useful resource for organic chemists and research workers in the field.
Download or read book Illustrated Official Journal patents written by Great Britain. Patent Office and published by . This book was released on 1996 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Materials Processing and Manufacturing written by Yogesh Jaluria and published by Springer. This book was released on 2018-05-24 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on advanced processing of new and emerging materials, and advanced manufacturing systems based on thermal transport and fluid flow. It examines recent areas of considerable growth in new and emerging manufacturing techniques and materials, such as fiber optics, manufacture of electronic components, polymeric and composite materials, alloys, microscale components, and new devices and applications. The book includes analysis, mathematical modeling, numerical simulation and experimental study of processes for prediction, design and optimization. It discusses the link between the characteristics of the final product and the basic transport mechanisms and provides a foundation for the study of a wide range of manufacturing processes. Focuses on new and advanced methods of manufacturing and materials processing with traditional methods described in light of the new approaches; Maximizes reader understanding of the fundamentals of how materials change, what transport processes are involved, and how these can be simulated and optimized - concepts not covered elsewhere; Introduces new materials and applications in manufacturing and summarizes traditional processing methods, such as heat treatment, extrusion, casting, injection molding, and bonding, to show how they have evolved and how they could be used for meeting the challenges that we face today.
Download or read book 23nd Annual Conference on Composites Advanced Ceramics Materials and Structures A Volume 20 Issue 3 written by Ersan Ustundag and published by John Wiley & Sons. This book was released on 2009-09-28 with total page 655 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is part of the Ceramic Engineering and Science Proceeding (CESP) series. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.
Download or read book Application of Chemical Engineering written by Zhong Cao and published by Trans Tech Publications Ltd. This book was released on 2011-05-12 with total page 3124 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 2011 International Conference on Chemical Engineering and Advanced Materials, (CEAM 2011), 28-30 May, 2011
Download or read book Advanced Materials and Techniques for Biosensors and Bioanalytical Applications written by Pranab Goswami and published by CRC Press. This book was released on 2020-11-01 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioanalytical science and its technological subdomain, biosensors, are ever-evolving subjects, striving for rapid improvement in terms of performance and expanding the target range to meet the vast societal and market demands. The key performance factors for a biosensor that drive the research are selectivity, sensitivity, response time, accuracy, and reproducibility, with additional requirements of its portability and inexpensive nature. These performance factors are largely governed by the materials and techniques being used in these bioanalytical platforms. The selection of materials to meet these requirements is critical, as their interaction or involvement with the biological recognition elements should initiate or improve these performance factors. The technique discussed primarily applies to transducers involved in converting a biochemical signal to optical or electrical signals. Over the years, the emergence of novel materials and techniques has drastically improved the performance of these bioanalytical systems, enabling them to expand their analytical horizon. These advanced materials and techniques are central to modern bioanalytical and biosensor research. Advanced Materials and Techniques for Biosensors and Bioanalytical Applications provides a comprehensive review of the subject, including a knowledge platform for both academics and researchers. Considering biosensors as a central theme to this book, an outline on this subject with background principles has been included, with a scope of extending the utility of the book to coursework in graduate and postgraduate schools. Features: • Basic principles on different classes of biosensors, recent advances and applications • Smart materials for biosensors and other rapid, portable detection devices • Metal nanoparticles and nanocrystals for analytical applications • Carbon-based nanoparticles and quantum dots for sensing applications • Nanozymes as potential catalysts for sensing applications • Bioelectrochemiluminescence and photoelectrochemical-based biosensors • Paper electronics and paper-based biosensors • Microbial biosensors: artificial intelligence, genetic engineering, and synthetic biology • Biofuel cells as a signal transduction platform • FET-based biosensors, including ISFET and BioFET This book serves as a reference for scientific investigators and a textbook for a graduate-level course in biosensors and advanced bioanalytical techniques.
Download or read book Nanostructured Thin Films and Coatings written by Sam Zhang and published by CRC Press. This book was released on 2010-06-18 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authored by leading experts from around the world, the three-volume Handbook of Nanostructured Thin Films and Coatings gives scientific researchers and product engineers a resource as dynamic and flexible as the field itself. The first two volumes cover the latest research and application of the mechanical and functional properties of thin films an
Download or read book Handbook on Synthesis Strategies for Advanced Materials written by A. K. Tyagi and published by Springer Nature. This book was released on 2021-08-17 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents state-of-the-art coverage of synthesis of advanced functional materials. Unconventional synthetic routes play an important role in the synthesis of advanced materials as many new materials are metastable and cannot be synthesized by conventional methods. This book presents various synthesis methods such as conventional solid-state method, combustion method, a range of soft chemical methods, template synthesis, molecular precursor method, microwave synthesis, sono-chemical method and high-pressure synthesis. It provides a comprehensive overview of synthesis methods and covers a variety of materials, including ceramics, films, glass, carbon-based, and metallic materials. Many techniques for processing and surface functionalization are also discussed. Several engineering aspects of materials synthesis are also included. The contents of this book are useful for researchers and professionals working in the areas of materials and chemistry.
Download or read book Functionalized Polymers written by Narendra Pal Singh Chauhan and published by CRC Press. This book was released on 2021-05-14 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Functionalized polymers are macromolecules to which chemically bound functional groups are attached which can be used as catalysts, reagents, protective groups, etc. Functionalized polymers have low cost, ease of processing and attractive features for functional organic molecules. Chemical reactions for the introduction of functional groups in polymers and the conversion of functional groups in polymers depend on different properties. Such properties are of great importance for functionalization reactions for possible applications of reactive polymers. This book deals with the synthesis and design of various functional polymers, the modification of preformed polymer backbones and their various applications.
Download or read book Summary of the Power Systems Workshop on Nanotechnology for the Intelligence Community written by National Research Council and published by National Academies Press. This book was released on 2004-02-20 with total page 47 pages. Available in PDF, EPUB and Kindle. Book excerpt: The emergence of nanotechnology as a major science and technology research topic has sparked substantial interest by the intelligence community. In particular the community is interested both in the potential for nanotechnology to assist intelligence operations and threats it could create. To explore these questions, the Intelligence Technology Innovation Center asked the National Research Council to conduct a number of activities to illustrate the potential for nanotechnology to address key intelligence community needs. The first of these was a workshop to explore technology opportunities and challenges in power systems that could be addressed by nanotechnology. This report presents a summary of that workshop. It includes an overview of power technologies and discussions on nanoscale properties of energy storage materials, device experience, manufacturing and material handling considerations, and natural power.
Download or read book Summary of the Sensing and Positioning Technology Workshop of the Committee on Nanotechnology for the Intelligence Community written by National Research Council and published by National Academies Press. This book was released on 2004-07-14 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: The emergence of nanotechnology as a major science and technology research topic has sparked substantial interest by the intelligence community. In particular the community is interested both in the potential for nanotechnology to assist intelligence operations and threats it could create. To explore these questions, the Intelligence Technology Innovation Center asked the National Research Council to conduct a number of activities to illustrate the potential for nanotechnology to address key intelligence community needs. The second of these was a workshop to explore how nanotechnology might enable advances in sensing and locating technology. This report presents a summary of that workshop. In includes an overview of security technologies, and discussions of systems, natural chemical/biological tags, passive chemical/biological tags, and radio/radar/optical tags.
Download or read book Advanced Materials for Membrane Preparation written by Maria Giovanna Buonomenna and published by Bentham Science Publishers. This book was released on 2012 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need to reduce pollution and the waste of energy and resources imposes a wider diffusion of environmentally friendly membrane systems. The expanding domain of membrane operations demands tailored materials with unprecedented performances and resistanc
Download or read book The Nanotechnology Revolution written by Dale A. Stirling and published by CRC Press. This book was released on 2018-01-17 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology is changing the world in a very big way, but at the atomic and sub-atomic level. Although the roots of nanotechnology can be traced back to more than a century ago, the last three decades have witnessed an explosion of nano-based technologies and products. This reference work examines the history, current status, and future directions of nanotechnology through an exhaustive search of the technical and scientific literature. The more than 4000 bibliographic citations it includes are carefully organized into core subject areas, and a geographic and subject index allows readers to quickly locate documents of interest. Although a sense of the global reach and interest in nanotechnology can be gleaned from the reference sections of countless journal articles, conference papers, and books, this is the only reference work providing an in-depth global perspective that is ready-made for nanotechnology professionals and those interested in learning more about all things nanotechnology. Despite the abundance of online resources, there is still an urgent need for well-researched, well-presented, concise, and thematically organized reference works. Instead of relying on wiki pages, citation aggregators, and related websites, the author searched the databases and databanks of scholarly literature search providers such as EBSCO, ProQuest, PUBMED, STN International, and Thomson Reuters. In addition, he used select serials-related databases to account for pertinent documents from countries in which English is not the primary national language (i.e., China Online Journals, e-periodica, J-STAGE, and SciELO Brazil among others).
