Download or read book Industrial Applications of Lasers written by John F. Ready and published by Elsevier. This book was released on 1997-04-25 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical book with a variety of uses, this book can help applications engineers spark problem-solving techniques through the use of lasers. Industrial Application of Lasers, Second Edition takes the reader through laser fundamentals, unusual properties of laser light, types of practical lasers available, and commonly used accessory equipment. The book also applies this information to existing and developing applications. Current uses of lasers, including laser welding and cutting, electronic fabrication techniques, lightwave communications, laser-based applications in alignment, surveying, and metrology are all covered as well as discussing the potential for future applications such as all-optical computers,remote environmental monitoring, and laser-assisted thermonuclear fusion. Explains basic laser fundamentals as well as emphasizing how lasers are used for real applications in industry Describes the importance of laser safety Discusses potentially important future applications such as remote environmental monitoring Includes rare expert lore and opinion
Download or read book Lasers written by Hans Joachim Eichler and published by Springer. This book was released on 2018-11-19 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of laser sources and their applications in various fields of science, industry, and technology. After an introduction to the basics of laser physics, different laser types and materials for lasers are summarized in the context of a historical survey, outlining the evolution of the laser over the past five decades. This includes, amongst other aspects, gas lasers, excimer lasers, the wide range of solid-state and semiconductor lasers, and femtosecond and other pulsed lasers where particular attention is paid to high-power sources. Subsequent chapters address related topics such as laser modulation and nonlinear frequency conversion. In closing, the enormous importance of the laser is demonstrated by highlighting its current applications in everyday life and its potential for future developments. Typical applications in advanced material processing, medicine and biophotonics as well as plasma and X-ray generation for nanoscale lithography are discussed. The book provides broad and topical coverage of laser photonics and opto-electronics, focusing on significant findings and recent advances rather than in-depth theoretical studies. Thus, it is intended not only for university students and engineers, but also for scientists and professionals applying lasers in biomedicine, material processing and everyday consumer products. Further, it represents essential reading for engineers using or developing high-power lasers for scientific or industrial applications.
Download or read book Lasers for Medical Applications written by Helena Jelínková and published by Elsevier. This book was released on 2013-09-30 with total page 827 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lasers have a wide and growing range of applications in medicine. Lasers for Medical Applications summarises the wealth of recent research on the principles, technologies and application of lasers in diagnostics, therapy and surgery. Part one gives an overview of the use of lasers in medicine, key principles of lasers and radiation interactions with tissue. To understand the wide diversity and therefore the large possible choice of these devices for a specific diagnosis or treatment, the respective types of the laser (solid state, gas, dye, and semiconductor) are reviewed in part two. Part three describes diagnostic laser methods, for example optical coherence tomography, spectroscopy, optical biopsy, and time-resolved fluorescence polarization spectroscopy. Those methods help doctors to refine the scope of involvement of the particular body part or, for example, to specify the extent of a tumor. Part four concentrates on the therapeutic applications of laser radiation in particular branches of medicine, including ophthalmology, dermatology, cardiology, urology, gynecology, otorhinolaryngology (ORL), neurology, dentistry, orthopaedic surgery and cancer therapy, as well as laser coatings of implants. The final chapter includes the safety precautions with which the staff working with laser instruments must be familiar. With its distinguished editor and international team of contributors, this important book summarizes international achievements in the field of laser applications in medicine in the past 50 years. It provides a valuable contribution to laser medicine by outstanding experts in medicine and engineering. Describes the interaction of laser light with tissue Reviews every type of laser used in medicine: solid state, gas, dye and semiconductor Describes the use of lasers for diagnostics
Download or read book Medical Applications of Lasers written by D.R. Vij and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: A careful review of the literature covering various aspects of applications of lasers in science and technology reveals that lasers are being applied very widely throughout the entire gamut of physical medicine. After surveying the current developments taking place in the field of medical applications of lasers, it was considered appropriate to bring together these efforts of international research scientists and experts into one volume. It is with this aim that the editors have prepared this volume which brings current research and recent developments to the attention of a wide spectrum of readership associated with hospitals, medical institutions and universities world wide, including also the medical instrument industry. Both teachers and students in the medical faculties will especially find this compendium quite useful. This book is comprised of eleven chapters. All of the important medical applications of lasers are featured. The editors have made every effort that individual chapters are self-contained and written by experts. Emphasis has been placed on straight and simple presentation of the subject matter so that even the new entrants into the field will find the book of value.
Download or read book Industrial Applications of Lasers written by John Ready and published by Elsevier. This book was released on 2012-12-02 with total page 605 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Applications of Lasers focuses on how lasers have been used for practical applications in industry. This text aims to stimulate the imagination of the readers, who can then evaluate the potential application of lasers to solve their own problems. Comprised of 21 chapters, this book starts with an overview of the fundamental background of lasers, and then discusses the basic principles of how lasers operate. Other chapters provide an understanding of how holograms really work. This text also discusses several topics relevant to lasers, themselves, including the types of practical lasers and laser properties. This book considers laser safety, which is very important for anyone considering a laser application. Finally, this text explores the various developed laser applications, including scribing of ceramics, laser welding and cutting of metals, as well as applications in surveying, alignment, and metrology. This book is a valuable resource to laser technicians, physicists, scientists, researchers, and readers whose interests span a variety of fields.
Download or read book Lasers and Their Applications written by Phoenix Walsh and published by Scientific e-Resources. This book was released on 2018-11-26 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: A laser is a device that emits light through a process of optical amplification based on the stimulated emission of electromagnetic radiation. The term "e;laser"e; originated as an acronym for "e;light amplification by stimulated emission of radiation"e;. Laser Applications provides a firm grounding in the fundamental concepts over governing the field on Optics. This reference book is useful for the students of B.E., B.Tech. and M.Tech., courses. The present book is an attempt to treat the subject of Laser as an introductory course. With recent major breakthroughs in ultrafast laser technology and femtosecond nonlinear spectroscopic techiques, Femtosecond Laser Spectroscopy is currently a burgeoning field in many branches of science, including physics, chemistry, biology, and materials science. Attempts have also been made to cover the frontline areas in the subject. The development of Laser and its various applications in Communications, Radiation, medicine, Holography etc., has been given due importance.
Download or read book Lasers in the Preservation of Cultural Heritage written by Costas Fotakis and published by CRC Press. This book was released on 2006-10-25 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the maturation of laser technology in diagnostic and conservation applications, conservation scientists, archeologists, art historians, researchers, and advanced science-oriented students now have the tools necessary for preserving the future of our past-our cultural heritage. Presenting recent developments in the field, Lasers in the Preservation of Cultural Heritage: Principles and Applications addresses the basic concepts of laser applications and supplies case studies of analytical, structural diagnostic, and laser cleaning applications. The book provides a comprehensive presentation of the fundamental principles and applications of modern laser technology in the analysis of composition, diagnostics of structural integrity, and conservation of artworks and antiquities. Beginning with an introduction to the basic techniques used in art conservation and archeology, the book describes the fundamental aspects of laser-matter interactions, emphasizing laser diagnostics and laser processing applications. The next few chapters focus on laser-based spectroscopic techniques for the analysis of the composition of materials in art and archaeology, including laser-induced breakdown, Raman, and laser-induced fluorescence spectroscopic techniques. The book proceeds to highlight nondestructive diagnostic techniques, laser processing applications, laser applications for the cleaning of paintings and stone, and methods for the removal of encrustations. It concludes with case studies for the conservation of materials like parchment, paper, metal, ivory, and wood, and includes conservation approaches for modern paintings. Bridging science with art, Lasers in the Preservation of Cultural Heritage presents a systematic overview of the fundamentals and applications of laser techniques in artwork conservation and archeological science.
Download or read book Opportunities in Intense Ultrafast Lasers written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2018-01-31 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: The laser has revolutionized many areas of science and society, providing bright and versatile light sources that transform the ways we investigate science and enables trillions of dollars of commerce. Now a second laser revolution is underway with pulsed petawatt-class lasers (1 petawatt: 1 million billion watts) that deliver nearly 100 times the total world's power concentrated into a pulse that lasts less than one-trillionth of a second. Such light sources create unique, extreme laboratory conditions that can accelerate and collide intense beams of elementary particles, drive nuclear reactions, heat matter to conditions found in stars, or even create matter out of the empty vacuum. These powerful lasers came largely from U.S. engineering, and the science and technology opportunities they enable were discussed in several previous National Academies' reports. Based on these advances, the principal research funding agencies in Europe and Asia began in the last decade to invest heavily in new facilities that will employ these high-intensity lasers for fundamental and applied science. No similar programs exist in the United States. Opportunities in Intense Ultrafast Lasers assesses the opportunities and recommends a path forward for possible U.S. investments in this area of science.
Download or read book Chemical and Biochemical Applications of Lasers written by Charles Bradley Moore and published by . This book was released on 1974 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Solid State Lasers and Applications written by Alphan Sennaroglu and published by CRC Press. This book was released on 2017-12-19 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of the favorable characteristics of solid-state lasers, they have become the preferred candidates for a wide range of applications in science and technology, including spectroscopy, atmospheric monitoring, micromachining, and precision metrology. Presenting the most recent developments in the field, Solid-State Lasers and Applications focuses on the design and applications of solid-state laser systems. With contributions from leading international experts, the book explores the latest research results and applications of solid-state lasers as well as various laser systems. The beginning chapters discuss current developments and applications of new solid-state gain media in different wavelength regions, including cerium-doped lasers in the ultraviolet range, ytterbium lasers near 1μm, rare-earth ion-doped lasers in the eye-safe region, and tunable Cr2+:ZnSe lasers in the mid-infrared range. The remaining chapters study specific modes of operation of solid-state laser systems, such as pulsed microchip lasers, high-power neodymium lasers, ultrafast solid-state lasers, amplification of femtosecond pulses with optical parametric amplifiers, and noise characteristics of solid-state lasers. Solid-State Lasers and Applications covers the most important aspects of the field to provide current, comprehensive coverage of solid-state lasers.
Download or read book Tunable Laser Applications written by F.J. Duarte and published by CRC Press. This book was released on 2016-02-22 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Broadly tunable lasers continue to have a tremendous impact in many and diverse fields of science and technology. From a renaissance in laser spectroscopy to Bose-Einstein condensation, the one nexus is the tunable laser. Tunable Laser Applications describes the physics and architectures of widely applied tunable laser sources. Fully updated and ex
Download or read book Lasers Principles Types and Applications written by K. R. Nambiar and published by New Age International. This book was released on 2006 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Book On Lasers Is The Culmination Of Several Years Of Relentless Personal Research, Exhaustive Literature Survey, Critical Analysis Of All The Facets Of The Subject And Interactions With The Subject Experts And Students In India And Abroad, By The Author.This Book Has Been Very Systematically Structured And Organised. The Subject Has Been Divided Into Three Parts. Part A Deals With All The Established Principles And Theories Of Laser Science Prefixed With A Journey Through The Relevant Areas Of Optics And Modern Physics. Part B Presents A Galaxy Of All The Available Laser Schemes Of The Day, With A Peep Into The Future. Part C Deals With The Myriads Of Applications Of This 'Wonder Beam' In Every Walk Of Life.While Giving An Exhaustive Account About Lasers, The Book Also Covers All The, Relevant Aspects Of Related Subjects Such As Fibre Optics, Holography, Laser Safety Etc. Apart From The Excellent Presentation Of The Topics, As They Unfold, This Book Contains A Rich Fund Of Worked Out Examples And Student Exercises, With Answers.The Language Is Simple And Reader-Friendly, The Treatise Logical, And Even The Intricate Mathematical Derivations And Clear And Lucid. This Book Is Meant To Be A Very Valuable Guide To Students At Graduate And Postgraduate Levels And To Those Working Or Intending To Work In The Field Of Lasers, To Add To What They Already Know. This Is Perhaps The Only Book, At Present, On Lasers By An Indian Author With Such A Vast Coverage Of The Subject Itself And The Associated Disciplines.
Download or read book CO2 Lasers Effects and Applications written by W Duley and published by Elsevier. This book was released on 2012-12-02 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: CO2 Lasers: Effects and Applications examines and summarizes the important applications of the device in different areas of study like physics, chemistry, and engineering. In some parts of the book, the reader is assumed to be knowledgeable in university level mathematics or some specialized area in physics or chemistry. The book consists of 10 chapters where the first two establish the general concepts on lasers and CO2 lasers, respectively. Chapter 3 takes the reader further and presents a comprehensive review of optical components for use such as detectors, windows, and mirrors. Because the CO2 laser is mostly used as a heat source, the theory of laser-surface heating is relevant in the discussion. This theory is presented in Chapter 4. Chapters 5 and 6 meanwhile present a summary of observations on cutting, welding, and some related topics. The following chapters discuss the different applications of CO2 lasers in different areas and processes. Some of these applications include in the generation of thermal effect, laser deposition of thin films, spectroscopy, laser photochemistry, and meteorology and communication systems. The text is a good source of reference to both students and scientists in the areas of physics, chemistry, and engineering.
Download or read book Understanding Lasers written by Jeff Hecht and published by John Wiley & Sons. This book was released on 2018-12-27 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: The expanded fourth edition of the book that offers an essential introduction to laser technology and the newest developments in the field The revised and updated fourth edition of Understanding Lasers offers an essential guide and introduction that explores how lasers work, what they do, and how they are applied in the real world. The author—a Fellow of The Optical Society—reviews the key concepts of physics and optics that are essential for understanding lasers and explains how lasers operate. The book also contains information on the optical accessories used with lasers. Written in non-technical terms, the book gives an overview of the wide-variety laser types and configurations. Understanding Lasers covers fiber, solid-state, excimer, helium-neon, carbon dioxide, free-electron lasers, and more. In addition, the book also explains concepts such as the difference between laser oscillation and amplification, the importance of laser gain, and tunable lasers. The updated fourth edition highlights the most recent research and development in the field. This important resource: Includes a new chapter on fiber lasers and amplifiers Reviews new topics on physics of optical fibers and fiber lasers, disk lasers, and Ytterbium lasers Contains new sections on Laser Geometry and Implications, Diode Laser Structures, Optimal Parametric Sources, and 3D Printing and Additive Manufacturing Puts the focus on research and emerging developments in areas such as spectroscopy, slow light, laser cooling, and extremely precise measurements Contains appendices, glossary, and index that help make this book a useful reference Written for engineering and physics students, engineers, scientists, and technicians, the fourth edition of Understanding Lasers contains the basic concepts of lasers and the most recent advances in the technology.
Download or read book Handbook of Laser Technology and Applications written by Chunlei Guo and published by CRC Press. This book was released on 2021-06-23 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook gives a fully updated guide to lasers and laser technologies, including the complete range of their technical applications. This third volume covers modern applications in engineering and technology, including all new and updated case studies spanning telecommunications and data storage to medicine, optical measurement, defense and security, nanomaterials processing and characterization. Key Features: • Offers a complete update of the original, bestselling work, including many brand-new chapters. • Deepens the introduction to fundamentals, from laser design and fabrication to host matrices for solid-state lasers, energy level diagrams, hosting materials, dopant energy levels, and lasers based on nonlinear effects. • Covers new laser types, including quantum cascade lasers, silicon-based lasers, titanium sapphire lasers, terahertz lasers, bismuth-doped fiber lasers, and diode-pumped alkali lasers. • Discusses the latest applications, e.g., lasers in microscopy, high-speed imaging, attosecond metrology, 3D printing, optical atomic clocks, time-resolved spectroscopy, polarization and profile measurements, pulse measurements, and laser-induced fluorescence detection. • Adds new sections on laser materials processing, laser spectroscopy, lasers in imaging, lasers in environmental sciences, and lasers in communications. This handbook is the ideal companion for scientists, engineers, and students working with lasers, including those in optics, electrical engineering, physics, chemistry, biomedicine, and other relevant areas.
Download or read book Fiber Lasers written by Liang Dong and published by CRC Press. This book was released on 2016-09-19 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fiber laser, with its humble beginning in the late 1980s, has undergone tremendous development in the past decade or so, transforming itself from a research curiosity to a major force in modern manufacturing. Today, it is revolutionizing our economy by fundamentally changing the way we mark, machine, and process materials on an industrial scale. The recent development of high-power fiber lasers is also fundamentally shaping a wide range of other areas from physical sciences and medicine to geology and space exploration. In the past few years, the tactical deployment of direct energy weapons based on fiber lasers has become a reality. The development of fiber lasers is rooted in a number of technical areas including optical materials, optical waveguide design, nonlinear optics, optical fiber fabrication, and optical characterization, in addition to optical fiber components, and fiber laser design and architecture. No comprehensive in-depth coverage of such diverse topical areas has appeared in a single book. Many important developments have taken place in the past decade in both academia and industry. This book comprehensively covers the basics, technology and applications of fiber lasers including up-to-date developments in both academia and industry and is aimed to serve as both an introduction and research aid for graduate students, engineers, and scientists who are new to this field and also for veterans in the field
Download or read book Lasers in Materials Science written by Marta Castillejo and published by Springer Science & Business Media. This book was released on 2014-01-08 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers various aspects of lasers in materials science, including a comprehensive overview on basic principles of laser-materials interactions and applications enabled by pulsed laser systems. The material is organized in a coherent way, providing the reader with a harmonic architecture. While systematically covering the major current and emerging areas of lasers processing applications, the Volume provides examples of targeted modification of material properties achieved through careful control of the processing conditions and laser irradiation parameters. Special emphasis is placed on specific strategies aimed at nanoscale control of material structure and properties to match the stringent requirements of modern applications. Laser fabrication of novel nanomaterials, which expands to the domains of photonics, photovoltaics, sensing, and biomedical applications, is also discussed in the Volume. This book assembles chapters based on lectures delivered at the Venice International School on Lasers in Materials Science which was held in Isola di San Servolo, Venice, Italy, in July, 2012.