Download or read book Applications of Continuum Damage Mechanics to Fatigue and Fracture written by David L. McDowell and published by ASTM International. This book was released on 1997 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains papers from the May 1996 Symposium on Applications of Continuum Damage Mechanics (CDM) to Fatigue and Fracture. Papers in Section I deal with various aspects of modeling damage in composite materials, such as high temperature environmental degradation, fatigue, and viscous damage in metal a
Download or read book Continuum Damage Mechanics written by Sumio Murakami and published by Springer Science & Business Media. This book was released on 2012-02-24 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent developments in engineering and technology have brought about serious and enlarged demands for reliability, safety and economy in wide range of fields such as aeronautics, nuclear engineering, civil and structural engineering, automotive and production industry. This, in turn, has caused more interest in continuum damage mechanics and its engineering applications. This book aims to give a concise overview of the current state of damage mechanics, and then to show the fascinating possibility of this promising branch of mechanics, and to provide researchers, engineers and graduate students with an intelligible and self-contained textbook. The book consists of two parts and an appendix. Part I is concerned with the foundation of continuum damage mechanics. Basic concepts of material damage and the mechanical representation of damage state of various kinds are described in Chapters 1 and 2. In Chapters 3-5, irreversible thermodynamics, thermodynamic constitutive theory and its application to the modeling of the constitutive and the evolution equations of damaged materials are descried as a systematic basis for the subsequent development throughout the book. Part II describes the application of the fundamental theories developed in Part I to typical damage and fracture problems encountered in various fields of the current engineering. Important engineering aspects of elastic-plastic or ductile damage, their damage mechanics modeling and their further refinement are first discussed in Chapter 6. Chapters 7 and 8 are concerned with the modeling of fatigue, creep, creep-fatigue and their engineering application. Damage mechanics modeling of complicated crack closure behavior in elastic-brittle and composite materials are discussed in Chapters 9 and 10. In Chapter 11, applicability of the local approach to fracture by means of damage mechanics and finite element method, and the ensuing mathematical and numerical problems are briefly discussed. A proper understanding of the subject matter requires knowledge of tensor algebra and tensor calculus. At the end of this book, therefore, the foundations of tensor analysis are presented in the Appendix, especially for readers with insufficient mathematical background, but with keen interest in this exciting field of mechanics.
Download or read book Continuum Damage Mechanics Theory and Application written by Dusan Krajcinovic and published by Springer. This book was released on 2014-05-04 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Continuum Damage Mechanics written by Sumio Murakami and published by Springer Science & Business Media. This book was released on 2012-02-23 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent developments in engineering and technology have brought about serious and enlarged demands for reliability, safety and economy in wide range of fields such as aeronautics, nuclear engineering, civil and structural engineering, automotive and production industry. This, in turn, has caused more interest in continuum damage mechanics and its engineering applications. This book aims to give a concise overview of the current state of damage mechanics, and then to show the fascinating possibility of this promising branch of mechanics, and to provide researchers, engineers and graduate students with an intelligible and self-contained textbook. The book consists of two parts and an appendix. Part I is concerned with the foundation of continuum damage mechanics. Basic concepts of material damage and the mechanical representation of damage state of various kinds are described in Chapters 1 and 2. In Chapters 3-5, irreversible thermodynamics, thermodynamic constitutive theory and its application to the modeling of the constitutive and the evolution equations of damaged materials are descried as a systematic basis for the subsequent development throughout the book. Part II describes the application of the fundamental theories developed in Part I to typical damage and fracture problems encountered in various fields of the current engineering. Important engineering aspects of elastic-plastic or ductile damage, their damage mechanics modeling and their further refinement are first discussed in Chapter 6. Chapters 7 and 8 are concerned with the modeling of fatigue, creep, creep-fatigue and their engineering application. Damage mechanics modeling of complicated crack closure behavior in elastic-brittle and composite materials are discussed in Chapters 9 and 10. In Chapter 11, applicability of the local approach to fracture by means of damage mechanics and finite element method, and the ensuing mathematical and numerical problems are briefly discussed. A proper understanding of the subject matter requires knowledge of tensor algebra and tensor calculus. At the end of this book, therefore, the foundations of tensor analysis are presented in the Appendix, especially for readers with insufficient mathematical background, but with keen interest in this exciting field of mechanics.
Download or read book Mechanics of Fatigue written by Vladimir V. Bolotin and published by CRC Press. This book was released on 2020-07-09 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanics of Fatigue addresses the range of topics concerning damage, fatigue, and fracture of engineering materials and structures. The core of this resource builds upon the synthesis of micro- and macro-mechanics of fracture. In micromechanics, both the modeling of mechanical phenomena on the level of material structure and the continuous approach are based on the use of certain internal field parameters characterizing the dispersed micro-damage. This is referred to as continuum damage mechanics. The author develops his own theory for macromechanics, called analytical fracture mechanics. This term means the system cracked body - loading or loading device - is considered as a mechanical system and the tools of analytical (rational) mechanics are applied thoroughly to describe crack propagation until the final failure. Chapter discuss: preliminary information on fatigue and engineering methods for design of machines and structures against failures caused by fatigue fatigue crack nucleation, including microstructural and continuous models theory of fatigue crack propagation fatigue crack growth in linear elastic materials subject to dispersed damage fatigue cracks in elasto-plastic material, including crack growth retardation due to overloading as well as quasistationary approximation fatigue and related phenomena in hereditary solids application of the theory fatigue crack growth considering environmental factors unidirectional fiber composites with ductile matrix and brittle, initially continuous fibers laminate composites Mechanics of Fatigue serves students dealing with mechanical aspects of fatigue, conducting research in fracture mechanics, structural safety, mechanics of composites, as well as modern branches of mechanics of solids and structures.
Download or read book Introduction to continuum damage mechanics written by L. Kachanov and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern engineering materials subjected to unfavorable mechanical and environmental conditions decrease in strength due to the accumulation of microstructural changes. For example, considering damage in metals we can mention creep damage, ductile plastic damage, embrittlement of steels and fatigue damage. To properly estimate the value of damage when designing reliable structures it is necessary to formulate the damage phenomenon in terms of mechanics. Then it is possible to analyse various engineering problems using analytical and computational techniques. During the last two decades the basic principles of continuum damage mechanics were formulated and some special problems were solved. Many scientific papers were published and several conferences on damage mechanics took place. Now continuum damage mechanics is rapidly developing branch of fracture mechanics. This book is probably the first one on the subject; it contains a sys tematic description of the basic aspects of damage mechanics and some of its applications. In general, a theoretical description of damage can be rather compli cated. The experiments in this field are difficult (especially under multiax ial stress and non-proportional loading). Therefore, experimental data, as a rule, are scarce. Determination of functions and constants, which play a role in the complex variants of the theory, from available experimental data is often practically impossible. ix L.M. Kachanov The problems of damage mechanics are mainly engineering ones. Therefore, the author tries to avoid superfluous mathematical formalism. Some more details of the book's subject can be found in the list of con tents.
Download or read book Continuum Damage Mechanics of Materials and Structures written by O. Allix and published by Elsevier. This book was released on 2002-08-13 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: Created in 1975, LMT-Cachan is a joint laboratory École Normale Superieure de Cachan, Pierre & Marie Curie (Paris 6) University and the French Research Council CNRS (Department of Engineering Sciences). The Year 2000 marked the 25th anniversary of LMT. On this occasion, a series of lectures was organized in Cachan in September-October, 2000. This publication contains peer-reviewed proceedings of these lectures and is aimed to present engineers and scientists with an overview of the latest developments in the field of damage mechanics. The formulation of damage models and their identification procedures were discussed for a variety of materials.
Download or read book Engineering Damage Mechanics written by Jean Lemaitre and published by Springer Science & Business Media. This book was released on 2006-01-16 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting his major contributions to the field, Jean Lemaitre’s "Engineering Damage Mechanics" presents simplified and advanced methods organized within a unified framework for designers of any mechanical component. Explains how to apply continuous damage mechanics to failures of mechanical and civil engineering components in ductile, creep, fatigue and brittle conditions. Incorporates many basic examples, while emphasizing key practical considerations such as material parameter identification, and provides perspective on the advantage and disadvantages of various approaches.
Download or read book Continuum Damage Mechanics and Numerical Applications written by Wohua Zhang and published by Springer Science & Business Media. This book was released on 2010-11-19 with total page 937 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Continuum Damage Mechanics and Numerical Applications" presents a systematic development of the theory of Continuum Damage Mechanics and its numerical engineering applications using a unified form of the mathematical formulations in anisotropic and isotropic damage models. The theoretical framework is based on the thermodynamic theory of energy and material dissipation and is described by a set of fundamental formulations of constitutive equations of damaged materials, development equations of the damaged state, and evolution equations of micro-structures. According to concepts of damage-dissipation of the material state and effective evolution of material properties, all these advanced equations, which take nonsymmetrized effects of damage aspects into account, are developed and modified from the traditional general failure models so they are more easily applied and verified in a wide range of engineering practices by experimental testing. Dr. Wohua Zhang is a Professor at Engineering Mechanics Research Center in Zhejiang University of China. Dr. Yuanqiang Cai is a Professor at Department of Civil Engineering in Zhejiang University of China.
Download or read book Continuum damage mechanics written by Michel Hendrik Julius Wilhelm Paas and published by . This book was released on 1990 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applications of Continuum Damage Mechanics to Fatigue and Fracture written by David L. McDowell and published by ASTM International. This book was released on 1997 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains papers from the May 1996 Symposium on Applications of Continuum Damage Mechanics (CDM) to Fatigue and Fracture. Papers in Section I deal with various aspects of modeling damage in composite materials, such as high temperature environmental degradation, fatigue, and viscous damage in metal a
- Author : Nima Salajegheh
- Publisher :
- Release : 2004
- ISBN :
- Pages : 260 pages
Theoretical Derivation and Numerical Implementation of Continuum Damage Based Constitutive Equations
Download or read book Theoretical Derivation and Numerical Implementation of Continuum Damage Based Constitutive Equations written by Nima Salajegheh and published by . This book was released on 2004 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fracture and Fatigue Control in Structures written by Stanley Theodore Rolfe and published by ASTM International. This book was released on 1977 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emphasizes applications of fracture mechanics to prevent fracture and fatigue failures in structures, rather than the theoretical aspects of fracture mechanics. The concepts of driving force and resistance force are used to differentiate between the mathematical side and the materials side. Case studies of actual failures are new to the third edition. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book Fatigue of Materials written by Subra Suresh and published by Cambridge University Press. This book was released on 1998-10-29 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a leading researcher in the field, this revised and updated second edition of a highly successful book provides an authoritative, comprehensive and unified treatment of the mechanics and micromechanisms of fatigue in metals, non-metals and composites. The author discusses the principles of cyclic deformation, crack initiation and crack growth by fatigue, covering both microscopic and continuum aspects. The book begins with discussions of cyclic deformation and fatigue crack initiation in monocrystalline and polycrystalline ductile alloys as well as in brittle and semi-/non-crystalline solids. Total life and damage-tolerant approaches are then introduced in metals, non-metals and composites followed by more advanced topics. The book includes an extensive bibliography and a problem set for each chapter, together with worked-out example problems and case studies. This will be an important reference for anyone studying fracture and fatigue in materials science and engineering, mechanical, civil, nuclear and aerospace engineering, and biomechanics.
Download or read book Mechanics of Fracture Initiation and Propagation written by George C. Sih and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: The assessment of crack initiation and/or propagation has been the subject of many past discussions on fracture mechanics. Depending on how the chosen failure criterion is combined with the solution of a particular theory of continuum mechanics, the outcome could vary over a wide range. Mod elling of the material damage process could be elusive if the scale level of observation is left undefined. The specification of physical dimension alone is not sufficient because time and temperature also play an intimate role. It is only when the latter two variables are fixed that failure predictions can be simplified. The sudden fracture of material with a pre-existing crack is a case in point. Barring changes in the local temperature,* the energy released to create a unit surface area of an existing crack can be obtained by considering the change in elastic energy of the system before and after crack extension. Such a quantity has been referred to as the critical energy release rate, G e, or stress intensity factor, K Ie. Other parameters, such as the crack opening displacement (COD), path-independent J-integral, etc. , have been proposed; their relation to the fracture process is also based on the energy release concept. These one-parameter approaches, however, are unable simultaneously to account for the failure process of crack initiation, propagation and onset of rapid fracture. A review on the use of G, K I, COD, J, etc. , has been made by Sih [1,2].
Download or read book Creep and Damage in Materials and Structures written by Holm Altenbach and published by Springer. This book was released on 2014-05-04 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook gives a concise survey of constitutive and structural modeling for high temperature creep, damage, low – cycle fatigue and other inelastic conditions. The book shows the creep and continuum damage mechanics as rapidly developing discipline which interlinks the material science foundations, the constitutive modeling and computer simulation application to analysis and design of simple engineering components. It is addressed to young researchers and scientists working in the field of mechanics of inelastic, time-dependent materials and structures, as well as to PhD students in computational mechanics, material sciences, mechanical and civil engineering.
Download or read book Application of Fracture Mechanics to Cementitious Composites written by S.P. Shah and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 701 pages. Available in PDF, EPUB and Kindle. Book excerpt: Portland cement concrete is a relatively brittle material. As a result, mechanical behavior of concrete, conventionally reinforced concrete, prestressed concrete, and fiber reinforced concrete is critically influenced by crack propagation. It is, thus, not surprising that attempts are being made to apply the concepts of fracture mechanics to quantify the resistance to cracking in cementious composites. The field of fracture mechanics originated in the 1920's with A. A. Griffith's work on fracture of brittle materials such as glass. Its most significant applications, however, have been for controlling brittle fracture and fatigue failure of metallic structures such as pressure vessels, airplanes, ships and pipe lines. Considerable development has occurred in the last twenty years in modifying Griffith's ideas or in proposing new concepts to account for the ductility typical of metals. As a result of these efforts, standard testing techniques have been available to obtain fracture parameters for metals, and design based on these parameters are included in relevant specifications. Many attempts have been made, in the last two decades or so, to apply the fracture mechanics concepts to cement, mortar, con crete and reinforced concrete. So far, these attempts have not led to a unique set of material parameters which can quantify the resistance of these cementitious composites to fracture. No standard testing methods and a generally accepted theoretical analysis are established for concrete as they are for metals.