Download or read book 3D Printing written by Jasjit S. Suri and published by Elsevier Health Sciences. This book was released on 2021-09-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: New technologies in 3D printing offer innovative capabilities in surgery, from planning complex operations to providing alternatives to traditional training with more cost-effective outcomes. In 3D Printing: Application in Medical Surgery, Volume 2, Drs. Vasileios N. Papadopoulos, Vassilios Tsioukas, and Jasjit S. Suri bring together up-to-date information on 3D printing and its application in surgical specialties such as hebatobilliary and pancreatic surgery, vascular surgery, orthopedic surgery, obstetrics and gynecology, cardiovascular and thoracic surgery, and more. Discusses challenges and opportunities of 3D printing across surgical sub-specialties. Covers 3D printing and its application in major surgical specialties, as well as dentistry, transplantation, global surgery, and diagnostic and interventional radiology. Consolidates today's available information on this burgeoning topic into a single convenient resource.

Download or read book 3D Printing Applications in Cardiovascular Medicine written by James K Min and published by Academic Press. This book was released on 2018-07-04 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D Printing Applications in Cardiovascular Medicine addresses the rapidly growing field of additive fabrication within the medical field, in particular, focusing on cardiovascular medicine. To date, 3D printing of hearts and vascular systems has been largely reserved to anatomic reconstruction with no additional functionalities. However, 3D printing allows for functional, physiologic and bio-engineering of products to enhance diagnosis and treatment of cardiovascular disease. This book contains the state-of-the-art technologies and studies that demonstrate the utility of 3D printing for these purposes. - Addresses the novel technology and cardiac and vascular application of 3D printing - Features case studies and tips for applying 3D technology into clinical practice - Includes an accompanying website that provides 3D examples from cardiovascular clinicians, imagers, computer science and engineering experts

Download or read book 3D Printing for Energy Applications written by Albert Tarancón and published by John Wiley & Sons. This book was released on 2021-03-03 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D PRINTING FOR ENERGY APPLICATIONS Explore current and future perspectives of 3D printing for the fabrication of high value-added complex devices 3D Printing for Energy Applications delivers an insightful and cutting-edge exploration of the applications of 3D printing to the fabrication of complex devices in the energy sector. The book covers aspects related to additive manufacturing of functional materials with applicability in the energy sector. It reviews both the technology of printable materials and 3D printing strategies itself, and its use in energy devices or systems. Split into three sections, the book covers the 3D printing of functional materials before delving into the 3D printing of energy devices. It closes with printing challenges in the production of complex objects. It also presents an interesting perspective on the future of 3D printing of complex devices. Readers will also benefit from the inclusion of: A thorough introduction to 3D printing of functional materials, including metals, ceramics, and composites An exploration of 3D printing challenges for production of complex objects, including computational design, multimaterials, tailoring AM components, and volumetric additive manufacturing Practical discussions of 3D printing of energy devices, including batteries, supercaps, solar panels, fuel cells, turbomachinery, thermoelectrics, and CCUS Perfect for materials scientists, 3D Printing for Energy Applications will also earn a place in the libraries of graduate students in engineering, chemistry, and material sciences seeking a one-stop reference for current and future perspectives on 3D printing of high value-added complex devices.

Download or read book Fundamentals of 3D Food Printing and Applications written by Fernanda C. Godoi and published by Academic Press. This book was released on 2018-11-02 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of 3D Food Printing and Applications provides an update on this emerging technology that can not only create complex edible shapes, but also enable the alteration of food texture and nutritional content required by specific diets. This book discusses 3D food printing technologies and their working mechanisms within a broad spectrum of application areas, including, but not limited to, the development of soft foods and confectionary designs. It provides a unique and contemporary guide to help correlate supply materials (edible inks) and the technologies (e.g., extrusion and laser based) used during the construction of computer-aided 3D shapes. Users will find a great reference that will help food engineers and research leaders in food science understand the characteristics of 3D food printing technologies and edible inks. - Details existing 3D food printing techniques, with an in-depth discussion on the mechanisms of formation of self-supporting layers - Includes the effects of flow behaviour and viscoelastic properties of printing materials - Presents strategies to enhance printability, such as the incorporation of hydrocolloids and lubricant enhancers - 3D printing features of a range of food materials, including cereal based, insect enriched, fruits and vegetables, chocolate and dairy ingredients - Business development for chocolate printing and the prospects of 3D food printing at home for domestic applications - Prosumer-driven 3D food printing - Safety and labelling of 3D printed food

Download or read book 3D Printing written by Rafiq Noorani and published by CRC Press. This book was released on 2017-08-25 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D Printing is a faster, more cost-effective method for building prototypes from three-dimensional computer-aided design (CAD) drawings. 3D Printing provides a fundamental overview of the general product design and manufacturing process and presents the technology and application for designing and fabricating parts in a format that makes learning easy. This user-friendly book clearly covers the 3D printing process for designers, teachers, students, and hobbyists and can also be used as a reference book in a product design and process development.

Download or read book Additive Manufacturing and 3D Printing Technology written by G. K. Awari and published by CRC Press. This book was released on 2021-02-10 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing and 3D Printing Technology: Principles and Applications consists of the construction and working details of all modern additive manufacturing and 3D-printing technology processes and machines, while also including the fundamentals, for a well-rounded educational experience. The book is written to help the reader understand the fundamentals of the systems. This book provides a selection of additive manufacturing techniques suitable for near-term application with enough technical background to understand the domain, its applicability, and to consider variations to suit technical and organizational constraints. It highlights new innovative 3D-printing systems, presents a view of 4D printing, and promotes a vision of additive manufacturing and applications toward modern manufacturing engineering practices. With the block diagrams, self-explanatory figures, chapter exercises, and photographs of lab-developed prototypes, along with case studies, this new textbook will be useful to students studying courses in Mechanical, Production, Design, Mechatronics, and Electrical Engineering.

Download or read book 3D Concrete Printing Technology written by Jay G. Sanjayan and published by Butterworth-Heinemann. This book was released on 2019-02-15 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D Concrete Printing Technology provides valuable insights into the new manufacturing techniques and technologies needed to produce concrete materials. In this book, the editors explain the concrete printing process for mix design and the fresh properties for the high-performance printing of concrete, along with commentary regarding their extrudability, workability and buildability. This is followed by a discussion of three large-scale 3D printings of ultra-high performance concretes, including their processing setup, computational design, printing process and materials characterization. Properties of 3D-printed fiber-reinforced Portland cement paste and its flexural and compressive strength, density and porosity and the 3D-printing of hierarchical materials is also covered. - Explores the factors influencing the mechanical properties of 3D printed products out of magnesium potassium phosphate cement material - Includes methods for developing Concrete Polymer Building Components for 3D Printing - Provides methods for formulating geopolymers for 3D printing for construction applications

Download or read book 3D Printing in Medicine written by Deepak M. Kalaskar and published by Woodhead Publishing. This book was released on 2022-10-18 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D Printing in Medicine, Second Edition examines the rapidly growing market of 3D-printed biomaterials and their clinical applications. With a particular focus on both commercial and premarket tools, the book looks at their applications within medicine and the future outlook for the field. The chapters are written by field experts actively engaged in educational and research activities at the top universities in the world. The earlier chapters cover the fundamentals of 3D printing, including topics such as materials and hardware. The later chapters go on to cover innovative applications within medicine such as computational analysis of 3D printed constructs, personalized 3D printing - including 3D cell and organ printing and the role of AI - with a subsequent look at the applications of high-resolution printing, 3D printing in diagnostics, drug development, 4D printing, and much more. This updated new edition features completely revised content, with additional new chapters covering organs-on-chips, bioprinting regulations and standards, intellectual properties, and socio-ethical implications of organs-on-demand. - Reviews a broad range of biomedical applications of 3D printing biomaterials and technologies - Provides an interdisciplinary look at 3D printing in medicine, bridging the gap between engineering and clinical fields - Includes completely updated content with additional new chapters, covering topics such as organs-on-chips, bioprinting regulations, intellectual properties, medical standards in 3D printing, and more

Download or read book 3D Printing written by Andreas Gebhardt and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2018-12-10 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a clear and concise guide to Additive Manufacturing (AM), now a well-established valuable tool for making models and prototypes, and also a manufacturing method for molds and final parts finding applications in industries such as medicine, car manufacturing, and aerospace engineering. The book was designed as a supporting material for special courses on advanced manufacturing technology, and for supplementing the content of traditional manufacturing lessons. This second edition has been updated to account for the recent explosion of availability of small, inexpensive 3D printers for domestic use, as well as new industrial printers for series production that have come onto the market. Contents: • Basics of 3D Printing Technology • Additive Manufacturing Processes/3D Printing • The Additive Manufacturing Process Chain and Machines for Additive Manufacturing • Applications of Additive Manufacturing • Perspectives and Strategies of Additive Manufacturing • Materials and Design • Glossary of Terms, Abbreviations, and Definitions

Download or read book 3D Printing Technology and Its Diverse Applications written by H. B. Muralidhara and published by CRC Press. This book was released on 2021-12-23 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new volume explores the exciting and diverse applications of three-dimensional printing in a variety of industries, including food processing, environmental sciences, biotechnology, medical devices, energy storage, civil engineering, the textile and fashion industry, and more. It describes the various 3D printing methods, the commonly used materials, and the pros and cons. It also presents an overview of the historical development and modern-day trends in additive manufacturing, as well as an exploration of the prospects of 3D printing technology in promoting academic education.

Download or read book 3D Printing for the Radiologist E Book written by Nicole Wake and published by Elsevier Health Sciences. This book was released on 2021-05-27 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive, yet concise, 3D Printing for the Radiologist presents an overview of three-dimensional printing at the point of care. Focusing on opportunities and challenges in radiology practice, this up-to-date reference covers computer-aided design principles, quality assurance, training, and guidance for integrating 3D printing across radiology subspecialties. Practicing and trainee radiologists, surgeons, researchers, and imaging specialists will find this an indispensable resource for furthering their understanding of the current state and future outlooks for 3D printing in clinical medicine. - Covers a wide range of topics, including basic principles of 3D printing, quality assurance, regulatory perspectives, and practical implementation in medical training and practice. - Addresses the challenges associated with 3D printing integration in clinical settings, such as reimbursement, regulatory issues, and training. - Features concise chapters from a team of multidisciplinary chapter authors, including practicing radiologists, researchers, and engineers. - Consolidates today's available information on this timely topic into a single, convenient, resource.

Download or read book 3D Printing in Chemical Sciences written by Vipul Gupta and published by Royal Society of Chemistry. This book was released on 2019-03-20 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D printing has rapidly established itself as an essential enabling technology within research and industrial chemistry laboratories. Since the early 2000s, when the first research papers applying this technique began to emerge, the uptake by the chemistry community has been both diverse and extraordinary, and there is little doubt that this fascinating technology will continue to have a major impact upon the chemical sciences going forward. This book provides a timely and extensive review of the reported applications of 3D Printing techniques across all fields of chemical science. Describing, comparing, and contrasting the capabilities of all the current 3D printing technologies, this book provides both background information and reader inspiration, to enable users to fully exploit this developing technology further to advance their research, materials and products. It will be of interest across the chemical sciences in research and industrial laboratories, for chemists and engineers alike, as well as the wider science community.

Download or read book 3D Printing Intellectual Property and Innovation written by Rosa Maria Ballardini and published by Kluwer Law International B.V.. This book was released on 2016-04-24 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D printing (or, more correctly, additive manufacturing) is the general term for those software-driven technologies that create physical objects by successive layering of materials. Due to recent advances in the quality of objects produced and to lower processing costs, the increasing dispersion and availability of these technologies have major implications not only for manufacturers and distributors but also for users and consumers, raising unprecedented challenges for intellectual property protection and enforcement. This is the first and only book to discuss 3D printing technology from a multidisciplinary perspective that encompasses law, economics, engineering, technology, and policy. Originating in a collaborative study spearheaded by the Hanken School of Economics, the Aalto University and the University of Helsinki in Finland and engaging an international consortium of legal, design and production engineering experts, with substantial contributions from industrial partners, the book fully exposes and examines the fundamental questions related to the nexus of intellectual property law, emerging technologies, 3D printing, business innovation, and policy issues. Twenty-five legal, technical, and business experts contribute sixteen peer-reviewed chapters, each focusing on a specific area, that collectively evaluate the tensions created by 3D printing technology in the context of the global economy. The topics covered include: • current and future business models for 3D printing applications; • intellectual property rights in 3D printing; • essential patents and technical standards in additive manufacturing; • patent and bioprinting; • private use and 3D printing; • copyright licences on the user-generated content (UGC) in 3D printing; • copyright implications of 3D scanning; and • non-traditional trademark infringement in the 3D printing context. Specific industrial applications – including aeronautics, automotive industries, construction equipment, toy and jewellery making, medical devices, tissue engineering, and regenerative medicine – are all touched upon in the course of analyses. In a legal context, the central focus is on the technology’s implications for US and European intellectual property law, anchored in a comparison of relevant laws and cases in several legal systems. This work is a matchless resource for patent, copyright, and trademark attorneys and other corporate counsel, innovation economists, industrial designers and engineers, and academics and policymakers concerned with this complex topic.

Download or read book 3D Printing of Pharmaceuticals written by Abdul W. Basit and published by Springer. This book was released on 2018-08-06 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D printing is forecast to revolutionise the pharmaceutical sector, changing the face of medicine development, manufacture and use. Potential applications range from pre-clinical drug development and dosage form design through to the fabrication of functionalised implants and regenerative medicine. Within clinical pharmacy practice, printing technologies may finally lead to the concept of personalised medicines becoming a reality. This volume aims to be the definitive resource for anyone thinking of developing or using 3D printing technologies in the pharmaceutical sector, with a strong focus on the translation of printing technologies to a clinical setting. This text brings together leading experts to provide extensive information on an array of 3D printing techniques, reviewing the current printing technologies in the pharmaceutical manufacturing supply chain, in particular, highlighting the state-of-the-art applications in medicine and discussing modern drug product manufacture from a regulatory perspective. This book is a highly valuable resource for a range of demographics, including academic researchers and the pharmaceutical industry, providing a comprehensive inventory detailing the current and future applications of 3D printing in pharmaceuticals. Abdul W. Basit is Professor of Pharmaceutics at the UCL School of Pharmacy, University College London. Abdul’s research sits at the interface between pharmaceutical science and gastroenterology, forging links between basic science and clinical outcomes. He leads a large and multidisciplinary research group, and the goal of his work is to further the understanding of gastrointestinal physiology by fundamental research. So far, this knowledge has been translated into the design of new technologies and improved disease treatments, many of which are currently in late-stage clinical trials. He has published over 350 papers, book chapters and abstracts and delivered more than 250 invited research presentations. Abdul is also a serial entrepreneur and has filed 25 patents and founded 3 pharmaceutical companies (Kuecept, Intract Pharma, FabRx). Abdul is a frequent speaker at international conferences, serves as a consultant to many pharmaceutical companies and is on the advisory boards of scientific journals, healthcare organisations and charitable bodies. He is the European Editor of the International Journal of Pharmaceutics. Abdul was the recipient of the Young Investigator Award in Pharmaceutics and Pharmaceutical Technology from the American Association of Pharmaceutical Scientists (AAPS) and is the only non-North American scientist to receive this award. He was also the recipient of the Academy of Pharmaceutical Sciences (APS) award. Simon Gaisford holds a Chair in Pharmaceutics and is Head of the Department of Pharmaceutics at the UCL School of Pharmacy, University College London. He has published 110 papers, 8 book chapters and 4 authored books. His research is focused on novel technologies for manufacturing medicines, particularly using ink-jet printing and 3D printing, and he is an expert in the physico-chemical characterisation of compounds and formulations with thermal methods and calorimetry.

Download or read book 3D Printing in Medicine and Surgery written by Daniel J. Thomas and published by Woodhead Publishing. This book was released on 2020-08-14 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D Printing in Medicine and Surgery: Applications in Healthcare is an advanced book on surgical and enhanced medical applications that can be achieved with 3D printing. It is an essential handbook for medical practitioners, giving access to a range of practical methods, while also focusing on applied knowledge. This comprehensive resource features practical experiments and processes for preparing 3D printable materials. Early chapters cover foundational knowledge and background reading, while later chapters discuss and review the current technologies used to engineer specific tissue types, experiments and methods, medical approaches and the challenges that lie ahead for future research. The book is an indispensable reference guide to the various methods used by current medical practitioners working at the forefront of 3D printing applications in medicine. - Provides a detailed introduction and narrative on how 3-D printing can be used towards developing future medicine-based therapies - Covers up-to-date methods across a range of application areas for the first time in book form - Presents the only book on all current areas of 3D printing in medicine that is catered to a medical rather than engineering audience

Download or read book Biosynthetic Polymers for Medical Applications written by Laura Poole-Warren and published by Elsevier. This book was released on 2015-11-23 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biosynthetic Polymers for Medical Applications provides the latest information on biopolymers, the polymers that have been produced from living organisms and are biodegradable in nature. These advanced materials are becoming increasingly important for medical applications due to their favorable properties, such as degradability and biocompatibility. This important book provides readers with a thorough review of the fundamentals of biosynthetic polymers and their applications. Part One covers the fundamentals of biosynthetic polymers for medical applications, while Part Two explores biosynthetic polymer coatings and surface modification. Subsequent sections discuss biosynthetic polymers for tissue engineering applications and how to conduct polymers for medical applications. - Comprehensively covers all major medical applications of biosynthetic polymers - Provides an overview of non-degradable and biodegradable biosynthetic polymers and their medical uses - Presents a specific focus on coatings and surface modifications, biosynthetic hydrogels, particulate systems for gene and drug delivery, and conjugated conducting polymers

Download or read book The 3D Printing Handbook written by Ben Redwood and published by . This book was released on 2018-03 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 3D Printing Handbook provides practical advice on selecting the right technology and how-to design for 3D printing, based upon first-hand experience from the industry's leading experts.