Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS)* at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dis semination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volumes were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 38 (thesis year 1993) a total of 13,787 thesis titles from 22 Canadian and 164 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this impor tant annual reference work. While Volume 38 reports theses submitted in 1993, on occasion, certain uni versities do report theses submitted in previous years but not reported at the time.

Download or read book CJChE written by and published by . This book was released on 1996-02 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Masters Theses in the Pure and Applied Sciences written by Sade H Shafer and published by Springer Science & Business Media. This book was released on 1995 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cited in Sheehy, Chen, and Hurt . Volume 38 (thesis year 1993) reports a total of 13,787 thesis titles from 22 Canadian and 164 US universities. As in previous volumes, thesis titles are arranged by discipline and by university within each discipline. Any accredited university or college with a grad

Download or read book Energy Research Abstracts written by and published by . This book was released on 1987 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1989 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Dissertation Abstracts International written by and published by . This book was released on 1999 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Classical Thermodynamics of Non Electrolyte Solutions written by H. C. Van Ness and published by Elsevier. This book was released on 2013-10-22 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Classical Thermodynamics of Non-Electrolyte Solutions covers the historical development of classical thermodynamics that concerns the properties of vapor and liquid solutions of non-electrolytes. Classical thermodynamics is a network of equations, developed through the formal logic of mathematics from a very few fundamental postulates and leading to a great variety of useful deductions. This book is composed of seven chapters and begins with discussions on the fundamentals of thermodynamics and the thermodynamic properties of fluids. The succeeding chapter presents the equations of state for the calculation of the thermodynamic behavior of constant-composition fluids, both liquid and gaseous. These topics are followed by surveys of the mixing of pure materials to form a solution under conditions of constant temperature and pressure. The discussion then shifts to general equations for calculation of partial molal properties of homogeneous binary systems. The last chapter considers the approach to equilibrium of systems within which composition changes are brought about either by mass transfer between phases or by chemical reaction within a phase, or by both.

Download or read book Modeling Vapor Liquid Equilibria written by Hasan Orbey and published by Cambridge University Press. This book was released on 1998-05-28 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews the latest developments in a subject relevant to professionals involved in the simulation and design of chemical processes - includes disk of computer programs.

Download or read book Molecular Thermodynamics of Fluid Phase Equilibria written by John M. Prausnitz and published by Pearson Education. This book was released on 1998-10-22 with total page 1150 pages. Available in PDF, EPUB and Kindle. Book excerpt: The classic guide to mixtures, completely updated with new models, theories, examples, and data. Efficient separation operations and many other chemical processes depend upon a thorough understanding of the properties of gaseous and liquid mixtures. Molecular Thermodynamics of Fluid-Phase Equilibria, Third Edition is a systematic, practical guide to interpreting, correlating, and predicting thermodynamic properties used in mixture-related phase-equilibrium calculations. Completely updated, this edition reflects the growing maturity of techniques grounded in applied statistical thermodynamics and molecular simulation, while relying on classical thermodynamics, molecular physics, and physical chemistry wherever these fields offer superior solutions. Detailed new coverage includes: Techniques for improving separation processes and making them more environmentally friendly. Theoretical concepts enabling the description and interpretation of solution properties. New models, notably the lattice-fluid and statistical associated-fluid theories. Polymer solutions, including gas-polymer equilibria, polymer blends, membranes, and gels. Electrolyte solutions, including semi-empirical models for solutions containing salts or volatile electrolytes. Coverage also includes: fundamentals of classical thermodynamics of phase equilibria; thermodynamic properties from volumetric data; intermolecular forces; fugacities in gas and liquid mixtures; solubilities of gases and solids in liquids; high-pressure phase equilibria; virial coefficients for quantum gases; and much more. Throughout, Molecular Thermodynamics of Fluid-Phase Equilibria strikes a perfect balance between empirical techniques and theory, and is replete with useful examples and experimental data. More than ever, it is the essential resource for engineers, chemists, and other professionals working with mixtures and related processes.

Download or read book Thermodynamic Models written by Michael L. Michelsen and published by . This book was released on 2007 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Vapor Liquid Equilibria Using Unifac written by Aage Fredenslund and published by Elsevier. This book was released on 2012-12-02 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vapor-Liquid Equilibria Using UNIFAC: A Group-Contribution Method focuses on the UNIFAC group-contribution method used in predicting quantitative information on the phase equilibria during separation by estimating activity coefficients. Drawing on tested vapor-liquid equilibrium data on which UNIFAC is based, it demonstrates through examples how the method may be used in practical engineering design calculations. Divided into nine chapters, this volume begins with a discussion of vapor and liquid phase nonidealities and how they are calculated in terms of fugacity and activity coefficients, respectively. It then introduces the reader to the UNIFAC method and how it works, the procedure used in establishing the parameters needed for the model, prediction of binary and multicomponent vapor-liquid equilibria for a large number of systems, the potential of UNIFAC for predicting liquid-liquid equilibria, and how UNIFAC can be used to solve practical distillation design problems. This book will benefit process design engineers who want to reliably predict phase equilibria for designing distillation columns and other separation processes.

Download or read book Nbs Nrc Steam Tables written by Lester Haar and published by CRC Press. This book was released on 1984-01-01 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Vapor liquid Equilibrium Data Collection Aqueous organic systems written by Jürgen Gmehling and published by . This book was released on 2004 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Introduction to Applied Colloid and Surface Chemistry written by Georgios M. Kontogeorgis and published by John Wiley & Sons. This book was released on 2016-03-28 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Colloid and Surface Chemistry is a subject of immense importance and implications both to our everyday life and numerous industrial sectors, ranging from coatings and materials to medicine and biotechnology. How do detergents really clean? (Why can't we just use water?) Why is milk "milky"? Why do we use eggs so often for making sauces? Can we deliver drugs in better and controlled ways? Coating industries wish to manufacture improved coatings e.g. for providing corrosion resistance, which are also environmentally friendly i.e. less based on organic solvents and if possible exclusively on water. Food companies want to develop healthy, tasty but also long-lasting food products which appeal to the environmental authorities and the consumer. Detergent and enzyme companies are working to develop improved formulations which clean more persistent stains, at lower temperatures and amounts, to the benefit of both the environment and our pocket. Cosmetics is also big business! Creams, lotions and other personal care products are really just complex emulsions. All of the above can be explained by the principles and methods of colloid and surface chemistry. A course on this topic is truly valuable to chemists, chemical engineers, biologists, material and food scientists and many more.

Download or read book Green Petroleum written by M. R. Islam and published by John Wiley & Sons. This book was released on 2012-09-25 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Can "green petroleum" reverse global warming and bring down high gasoline prices? Written in non-technical language for the layperson, this book investigates and details how the oil and gas industry can "go green" with new processes and technologies, thus bringing the world's most important industry closer to environmental and economic sustainability. This book unravels the mysteries of the current energy crisis and argues that solutions to global warming will come only from the development of new technologies. Discussed here are the reasons why petroleum operations, as they are now, are not sustainable; how each practice treads an inherently implosive path; and how each spells irreversible damage to the planet's ecosystem. Fossil fuel consumption is not the culprit; rather, the practices involved, from exploration to refining and processing, are responsible for the current damage to the environment.

Download or read book The Law of Mass Action written by Andrei B. Koudriavtsev and published by Springer Science & Business Media. This book was released on 2011-06-27 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: 'Why are atoms so small?' asks 'naive physicist' in Erwin Schrodinger's book 'What is Life? The Physical Aspect of the Living Cell'. 'The question is wrong' answers the author, 'the actual problem is why we are built of such an enormous number of these particles'. The idea that everything is built of atoms is quite an old one. It seems that l Democritus himself borrowed it from some obscure Phoenician source . The arguments for the existence of small indivisible units of matter were quite simple. 2 According to Lucretius observable matter would disappear by 'wear and tear' (the world exists for a sufficiently long, if not infinitely long time) unless there are some units which cannot be further split into parts. th However, in the middle of the 19 century any reference to the atomic structure of matter was considered among European physicists as a sign of extremely bad taste and provinciality. The hypothesis of the ancient Greeks (for Lucretius had translated Epicurean philosophy into Latin hexameters) was at that time seen as bringing nothing positive to exact science. The properties of gaseous, liquid and solid bodies, as well as the behaviour of heat and energy, were successfully described by the rapidly developing science of thermodynamics.

Download or read book Equations of State for Fluids and Fluid Mixtures written by J.V. Sengers and published by Elsevier. This book was released on 2000-10-30 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been prepared under the auspices of Commission I.2 on Thermodynamics of the International Union of Pure and Applied Chemistry (IUPAC). The authors of the 18 chapters are all recognized experts in the field. The book gives an up-to-date presentation of equations of state for fluids and fluid mixtures. All principal approaches for developing equations of state are covered. The theoretical basis and practical use of each type of equation is discussed and the strength and weaknesses of each is addressed. Topics addressed include the virial equation of state, cubic equations and generalized van der Waals equations, perturbation theory, integral equations, corresponding stated and mixing rules. Special attention is also devoted to associating fluids, polydisperse fluids, polymer systems, self-assembled systems, ionic fluids and fluids near critical points.