Download or read book Application Of High performance Computing To Earthquake related Problems written by Muneo Hori and published by World Scientific. This book was released on 2024-07-02 with total page 647 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the continued improvements in computing power and digital information availability, we are witnessing the increasing use of high-performance computers to enhance simulations for the forecasting of hazards, disasters, and responses. This major reference work summarizes the theories, analysis methods, and computational results of various earthquake simulations by the use of supercomputers. It covers simulations in the fields of seismology, physical geology, earthquake engineering — specifically the seismic response of structures — and the socioeconomic impact of post-earthquake recovery on cities and societies. Individual chapters address phenomena such as earthquake cycles and plate boundary behavior, tsunamis, structural response to strong ground motion, and post-disaster traffic flow and economic activity. The methods used for these simulations include finite element methods, discrete element methods, smoothed particle hydrodynamics, and multi-agent models, among others.The simulations included in this book provide an effective bird's-eye view of cutting-edge simulations enhanced with high-performance computing for earthquake occurrence, earthquake damage, and recovery from the damage, combining three of the major fields of earthquake studies: earth science, earthquake engineering, and disaster-mitigation-related social science. The book is suitable for advanced undergraduates, graduates, and researchers in these fields.

Download or read book Application High Performance Computinghb written by Muneo Hori and published by Wspc (Europe). This book was released on 2023-12 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This major reference summarizes the theory, analysis methods, and computational results from supercomputers of various earthquake simulations using supercomputers. It covers simulations in the fields of physical geology, earthquake engineering - specifically the seismic response of structures - and the socioeconomic impact of post-earthquake recovery on cities and societies. These simulations provide an effective bird's-eye view of earthquake occurrence, earthquake damage, and recovery from the damage"--

Download or read book Special Issue on Application of High Performance Computing to Earthquake Engineering written by Tsuyoshi Ichimura and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High Performance Computing for Structural Mechanics and Earthquake Tsunami Engineering written by Shinobu Yoshimura and published by Springer. This book was released on 2015-10-26 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: Huge earthquakes and tsunamis have caused serious damage to important structures such as civil infrastructure elements, buildings and power plants around the globe. To quantitatively evaluate such damage processes and to design effective prevention and mitigation measures, the latest high-performance computational mechanics technologies, which include telascale to petascale computers, can offer powerful tools. The phenomena covered in this book include seismic wave propagation in the crust and soil, seismic response of infrastructure elements such as tunnels considering soil-structure interactions, seismic response of high-rise buildings, seismic response of nuclear power plants, tsunami run-up over coastal towns and tsunami inundation considering fluid-structure interactions. The book provides all necessary information for addressing these phenomena, ranging from the fundamentals of high-performance computing for finite element methods, key algorithms of accurate dynamic structural analysis, fluid flows with free surfaces, and fluid-structure interactions, to practical applications with detailed simulation results. The book will offer essential insights for researchers and engineers working in the field of computational seismic/tsunami engineering.

Download or read book Introduction To Computational Earthquake Engineering Third Edition written by Muneo Hori and published by World Scientific. This book was released on 2018-06-14 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides rigorous foundations of applying modern computational mechanics to earthquake engineering. The scope covers the numerical analysis of earthquake wave propagation processes and the faulting processes, and also presents the most advanced numerical simulations of earthquake hazards and disasters that can take place in an urban area.Two new chapters included are advanced topics on high performance computing and for constructing an analysis model.This is the first book in earthquake engineering that explains the application of modern numerical computation (which includes high performance computing) to various engineering seismology problems.

Download or read book Grand Challenges in Earthquake Engineering Research written by National Research Council and published by National Academies Press. This book was released on 2011-09-30 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: As geological threats become more imminent, society must make a major commitment to increase the resilience of its communities, infrastructure, and citizens. Recent earthquakes in Japan, New Zealand, Haiti, and Chile provide stark reminders of the devastating impact major earthquakes have on the lives and economic stability of millions of people worldwide. The events in Haiti continue to show that poor planning and governance lead to long-term chaos, while nations like Chile demonstrate steady recovery due to modern earthquake planning and proper construction and mitigation activities. At the request of the National Science Foundation, the National Research Council hosted a two-day workshop to give members of the community an opportunity to identify "Grand Challenges" for earthquake engineering research that are needed to achieve an earthquake resilient society, as well as to describe networks of earthquake engineering experimental capabilities and cyberinfrastructure tools that could continue to address ongoing areas of concern. Grand Challenges in Earthquake Engineering Research: A Community Workshop Report explores the priorities and problems regions face in reducing consequent damage and spurring technological preparedness advances. Over the course of the Grand Challenges in Earthquake Engineering Research workshop, 13 grand challenge problems emerged and were summarized in terms of five overarching themes including: community resilience framework, decision making, simulation, mitigation, and design tools. Participants suggested 14 experimental facilities and cyberinfrastructure tools that would be needed to carry out testing, observations, and simulations, and to analyze the results. The report also reviews progressive steps that have been made in research and development, and considers what factors will accelerate transformative solutions.

Download or read book Tools for High Performance Computing 2013 written by Andreas Knüpfer and published by Springer. This book was released on 2014-10-06 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current advances in High Performance Computing (HPC) increasingly impact efficient software development workflows. Programmers for HPC applications need to consider trends such as increased core counts, multiple levels of parallelism, reduced memory per core, and I/O system challenges in order to derive well performing and highly scalable codes. At the same time, the increasing complexity adds further sources of program defects. While novel programming paradigms and advanced system libraries provide solutions for some of these challenges, appropriate supporting tools are indispensable. Such tools aid application developers in debugging, performance analysis, or code optimization and therefore make a major contribution to the development of robust and efficient parallel software. This book introduces a selection of the tools presented and discussed at the 7th International Parallel Tools Workshop, held in Dresden, Germany, September 3-4, 2013.

Download or read book High Performance Computing in Science and Engineering Garching Munich 2007 written by Siegfried Wagner and published by Springer Science & Business Media. This book was released on 2008-10-22 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the fourth time, the Leibniz Supercomputing Centre (LRZ) and the Com- tence Network for Technical, Scienti c High Performance Computing in Bavaria (KONWIHR) publishes the results from scienti c projects conducted on the c- puter systems HLRB I and II (High Performance Computer in Bavaria). This book reports the research carried out on the HLRB systems within the last three years and compiles the proceedings of the Third Joint HLRB and KONWIHR Result and Reviewing Workshop (3rd and 4th December 2007) in Garching. In 2000, HLRB I was the rst system in Europe that was capable of performing more than one Tera op/s or one billion oating point operations per second. In 2006 it was replaced by HLRB II. After a substantial upgrade it now achieves a peak performance of more than 62 Tera op/s. To install and operate this powerful system, LRZ had to move to its new facilities in Garching. However, the situation regarding the need for more computation cycles has not changed much since 2000. The demand for higher performance is still present, a trend that is likely to continue for the foreseeable future. Other resources like memory and disk space are currently in suf cient abundance on this new system.

Download or read book Integrated Earthquake Simulation written by M. Hori and published by CRC Press. This book was released on 2022-09-26 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrated earthquake simulation (IES) is a new method for evaluating earthquake hazards and disasters induced in cities and urban areas. It utilises a sequence of numerical simulations of such aspects as earthquake wave propagation, ground motion amplification, structural seismic response, and mass evacuation. This book covers the basics of numerical analysis methods of solving wave equations, analyzing structural responses, and developing agent models for mass evaluation, which are implemented in IES. IES makes use of Monte-Carlo simulation, which takes account of the effects of uncertainties related to earthquake scenarios and the modeling of structures both above and below ground, and facilitates a better estimate of overall earthquake and disaster hazard. It also presents the recent achievement of enhancing IES with high-performance computing capability that can make use of automated models which employ various numerical analysis methods. Detailed examples of IES for the Tokyo Metropolis Earthquake and the Nankai Trough Earthquake are given, which use large scale analysis models of actual cities and urban areas.

Download or read book Introduction to Computational Earthquake Engineering written by Muneo Hori and published by World Scientific. This book was released on 2011 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Computational Earthquake Engineering covers solid continuum mechanics, finite element method and stochastic modeling comprehensively, with the second and third chapters explaining the numerical simulation of strong ground motion and faulting, respectively. Stochastic modeling is used for uncertain underground structures, and advanced analytical methods for linear and non-linear stochastic models are presented. The verification of these methods by comparing the simulation results with observed data is then presented, and examples of numerical simulations which apply these methods to practical problems are generously provided. Furthermore three advanced topics of computational earthquake engineering are covered, detailing examples of applying computational science technology to earthquake engineering problems.

Download or read book Use Of High Performance Computing In Meteorology Proceedings Of The Eleventh Ecmwf Workshop written by George Mozdzynski and published by World Scientific. This book was released on 2005-09-20 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geosciences and, in particular, numerical weather prediction are demanding the highest levels of available computer power. The European Centre for Medium-Range Weather Forecasts, with its experience in using supercomputers in this field, organizes every other year a workshop bringing together manufacturers, computer scientists, researchers and operational users to share their experiences and to learn about the latest developments. This volume provides an excellent overview of the latest achievements and plans for the use of new parallel techniques in the fields of meteorology, climatology and oceanography.

Download or read book High Performance Computing written by Michèle Weiland and published by Springer. This book was released on 2019-06-05 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 34th International Conference on High Performance Computing, ISC High Performance 2019, held in Frankfurt/Main, Germany, in June 2019. The 17 revised full papers presented were carefully reviewed and selected from 70 submissions. The papers cover a broad range of topics such as next-generation high performance components; exascale systems; extreme-scale applications; HPC and advanced environmental engineering projects; parallel ray tracing - visualization at its best; blockchain technology and cryptocurrency; parallel processing in life science; quantum computers/computing; what's new with cloud computing for HPC; parallel programming models for extreme-scale computing; workflow management; machine learning and big data analytics; and deep learning and HPC.

Download or read book High Performance Computing and Communications written by and published by . This book was released on 1994 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Parallel and High Performance Computing written by Robert Robey and published by Simon and Schuster. This book was released on 2021-06-22 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complex calculations, like training deep learning models or running large-scale simulations, can take an extremely long time. Efficient parallel programming can save hours--or even days--of computing time. Parallel and High Performance Computing shows you how to deliver faster run-times, greater scalability, and increased energy efficiency to your programs by mastering parallel techniques for multicore processor and GPU hardware. about the technology Modern computing hardware comes equipped with multicore CPUs and GPUs that can process numerous instruction sets simultaneously. Parallel computing takes advantage of this now-standard computer architecture to execute multiple operations at the same time, offering the potential for applications that run faster, are more energy efficient, and can be scaled to tackle problems that demand large computational capabilities. But to get these benefits, you must change the way you design and write software. Taking advantage of the tools, algorithms, and design patterns created specifically for parallel processing is essential to creating top performing applications. about the book Parallel and High Performance Computing is an irreplaceable guide for anyone who needs to maximize application performance and reduce execution time. Parallel computing experts Robert Robey and Yuliana Zamora take a fundamental approach to parallel programming, providing novice practitioners the skills needed to tackle any high-performance computing project with modern CPU and GPU hardware. Get under the hood of parallel computing architecture and learn to evaluate hardware performance, scale up your resources to tackle larger problem sizes, and deliver a level of energy efficiency that makes high performance possible on hand-held devices. When you''re done, you''ll be able to build parallel programs that are reliable, robust, and require minimal code maintenance. This book is unique in its breadth, with discussions of parallel algorithms, techniques to successfully develop parallel programs, and wide coverage of the most effective languages for the CPU and GPU. The programming paradigms include MPI, OpenMP threading, and vectorization for the CPU. For the GPU, the book covers OpenMP and OpenACC directive-based approaches and the native-based CUDA and OpenCL languages. what''s inside Steps for planning a new parallel project Choosing the right data structures and algorithms Addressing underperforming kernels and loops The differences in CPU and GPU architecture about the reader For experienced programmers with proficiency in a high performance computing language such as C, C++, or Fortran. about the authors Robert Robey has been active in the field of parallel computing for over 30 years. He works at Los Alamos National Laboratory, and has previously worked at the University of New Mexico, where he started up the Albuquerque High Performance Computing Center. Yuliana Zamora has lectured on efficient programming of modern hardware at national conferences, based on her work developing applications running on tens of thousands of processing cores and the latest GPU architectures.

Download or read book Computational Science and Its Applications ICCSA 2023 Workshops written by Osvaldo Gervasi and published by Springer Nature. This book was released on 2023-06-28 with total page 745 pages. Available in PDF, EPUB and Kindle. Book excerpt: This nine-volume set LNCS 14104 – 14112 constitutes the refereed workshop proceedings of the 23rd International Conference on Computational Science and Its Applications, ICCSA 2023, held at Athens, Greece, during July 3–6, 2023. The 350 full papers and 29 short papers and 2 PHD showcase papers included in this volume were carefully reviewed and selected from a total of 876 submissions. These nine-volumes includes the proceedings of the following workshops: Advances in Artificial Intelligence Learning Technologies: Blended Learning, STEM, Computational Thinking and Coding (AAILT 2023); Advanced Processes of Mathematics and Computing Models in Complex Computational Systems (ACMC 2023); Artificial Intelligence supported Medical data examination (AIM 2023); Advanced and Innovative web Apps (AIWA 2023); Assessing Urban Sustainability (ASUS 2023); Advanced Data Science Techniques with applications in Industry and Environmental Sustainability (ATELIERS 2023); Advances in Web Based Learning (AWBL 2023); Blockchain and Distributed Ledgers: Technologies and Applications (BDLTA 2023); Bio and Neuro inspired Computing and Applications (BIONCA 2023); Choices and Actions for Human Scale Cities: Decision Support Systems (CAHSC-DSS 2023); and Computational and Applied Mathematics (CAM 2023).

Download or read book Advances on Broadband and Wireless Computing Communication and Applications written by Leonard Barolli and published by Springer. This book was released on 2018-10-18 with total page 815 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents on the latest research findings, and innovative research methods and development techniques related to the emerging areas of broadband and wireless computing from both theoretical and practical perspectives. Information networking is evolving rapidly with various kinds of networks with different characteristics emerging and being integrated into heterogeneous networks. As a result, a number of interconnection problems can occur at different levels of the communicating entities and communication networks’ hardware and software design. These networks need to manage an increasing usage demand, provide support for a significant number of services, guarantee their QoS, and optimize the network resources. The success of all-IP networking and wireless technology has changed the way of life for people around the world, and the advances in electronic integration and wireless communications will pave the way for access to the wireless networks on the fly. This in turn means that all electronic devices will be able to exchange the information with each other in a ubiquitous way whenever necessary.

Download or read book From Tsunami Science to Hazard and Risk Assessment Methods and Models written by Stefano Lorito and published by Frontiers Media SA. This book was released on 2022-01-11 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: