Download or read book Expert Systems in Engineering Applications written by Spyros Tzafestas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Expert system technology is receiving increasing popularity and acceptance in the engineering community. This is due to the fact that there actually exists a close match between the capabilities of the current generation expert systems and the requirements of engineering practice. Prepared by a distinguished team of experts, this book provides a balanced state-of-the-art presentation of the design principles of engineering expert systems, and a representative picture of their capabilities to assist efficiently the design, diagnosis and operation of complex industrial plants. Among the application areas covered are the following: hardware synthesis, industrial plant layout design, fault diagnosis, process control, image analysis, computer communication, electric power systems, intelligent control, robotics, and manufacturing systems. The book is appropriate for the researcher and the professional. The researcher can save considerable time in searching the scattered technical information on engineering expert systems. The professional can have readily available a rich set of guidelines and techniques that are applicable to a wide class of engineering domains.
Download or read book Expert Systems Applications in Engineering and Manufacturing written by Adedeji Bodunde Badiru and published by Pearson Education. This book was released on 1992 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive, integrated guide to engineering and manufacturing applications of expert systems.
Download or read book Fuzzy Engineering Expert Systems with Neural Network Applications written by Adedeji Bodunde Badiru and published by John Wiley & Sons. This book was released on 2002-10-08 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an up-to-date integration of expert systems with fuzzy logic and neural networks. Includes coverage of simulation models not present in other books. Presents cases and examples taken from the authors' experience in research and applying the technology to real-world situations.
Download or read book Handbook of Expert Systems Applications in Manufacturing Structures and rules written by A. Mital and published by Springer Science & Business Media. This book was released on 2013-03-08 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is aimed at both researchers and practitioners, and provides a collection of expert systems in manufacturing and production engineering along with their knowledge base and rules. We believe that inclusion of the knowledge base and associated rules is essential if practitioners are to derive full benefit from these expert systems. This unique book is the result of our belief and the efforts of our distinguished colleagues who subscribe to this philosophy. A total of 15 different expert systems are included in this book. These expert systems are preceded by an introductory chapter written by Kuo, Preface XVll Mital and Anand. The expert system rules are included on a floppy disk in ASCII and can be easily accessed. These rules and the description of the expert system's structure should assist the users in customizing these systems. Overall, the expert systems included in this volume cover a fairly wide variety of manufacturing and production engineering topics.
Download or read book Industrial and Engineering Applications of Artificial Intelligence and Expert Systems written by Manton Matthews and published by CRC Press. This book was released on 2020-01-08 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the Proceedings of the Tenth International Conference on Industrial and Engineering Applications of Artificial Intelligence and Expert Systems, focusing on the theoretical aspects of intelligent systems research as well as extensions of theory of intelligent thinking machines.
Download or read book Design and Implementation of Intelligent Manufacturing Systems written by Mohammed Jamshidi and published by Pearson Education. This book was released on 1995-05-24 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: The introduction of artificial intelligence, neural networks, and fuzzy logic into industry has given a new perspective to manufacturing processes in the U.S. and abroad. To help readers keep pace, this book addresses topics of intelligent manufacturing from a variety of theoretical, empirical, design, and implementation perspectives.
Download or read book Industrial And Engineering Applications Of Artificial Intelligence And Expert Systems written by Moonis Ali and published by CRC Press. This book was released on 1988-08 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Expert Systems and Related Topics written by Marlene A. Palmer and published by IGI Global. This book was released on 1990-01-01 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive reference to all areas of expert systems and applications, plus advanced related topics, lets you spend your time reading expert systems literature rather than searching for it. It gives you a source of historical perspectives and outlooks on the future of the field. Whether you are a manager, a developer or an end user or researcher, Expert Systems and Related Topics: Selected Bibliography & Guide to Information Sources puts all the sources of expert systems literature at your fingertips.
Download or read book Applications of Artificial Intelligence in Additive Manufacturing written by Sachin Salunkhe and published by Engineering Science Reference. This book was released on 2021-10-30 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book provides introductory instruction on how to learn how to use artificial intelligence to produce additively manufactured parts, including a description of the starting points, what you can know, how it blends and how artificial intelligence in additive manufacturing apply"--
Download or read book Database and Expert Systems Applications written by Dimitris Karagiannis and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Database and Expert Systems Applications - DEXA - conferences are dedi cated to providing an international forum for the presentation of applications in the database and expert systems field, for the exchange of ideas and experiences, and for defining requirements for the future systems in these fields. After the very promising DEXA 90 in Vienna, Austria, we hope to have successfully established wjth this year's DEXA 91 a stage where scientists from diverse fields interested in application-oriented research can present and discuss their work. This year there was a total of more than 250 submitted papers from 28 different countries, in all continents. Only 98 of the papers could be accepted. The collection of papers in these proceedings offers a cross-section of the issues facing the area of databases and expert systems, i.e., topics of basic research interest on one hand and questions occurring when developing applications on the other. Major credit for the success of the conference goes to all of our colleagues who submitted papers for consideration and to those who have organized and chaired the panel sessions. Many persons contributed numerous hours to organize this conference. The names of most of them will appear on the following pages. In particular we wish to thank the Organization Committee Chairmen Johann Gordesch, A Min Tjoa, and Roland Wag ner, who also helped establishing the program. Special thanks also go to Gabriella Wagner and Anke Ruckert. Dimitris Karagiannis General Conference Chairman Contents Conference Committee.
Download or read book Industrial and Engineering Applications of Artificial Intelligence and Expert Systems written by Graham F. Forsyth and published by CRC Press. This book was released on 1995-08-08 with total page 888 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the areas of industry and engineering, AI techniques have become the norm in sectors including computer-aided design, intelligent manufacturing, and control. Papers in this volume represent work by both computer scientists and engineers separately and together. They directly and indirectly represent a real collaboration between computer science and engineering, covering a wide variety of fields related to intelligent systems technology ranging from neural networks, knowledge acquisition and representation, automated scheduling, machine learning, multimedia, genetic algorithms, fuzzy logic, robotics, automated reasoning, heuristic searching, automated problem solving, temporal, spatial and model-based reasoning, clustering, blackboard architectures, automated design, pattern recognition and image processing, automated planning, speech recognition, simulated annealing, and intelligent tutoring, as well as various computer applications of intelligent systems including financial analysis, artificial
Download or read book Research and Development in Expert Systems VII written by British Computer Society. Specialist Group on Expert Systems. Technical Conference and published by Cambridge University Press. This book was released on 1990-10-26 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the refereed and invited papers presented at Expert Systems 90, the tenth annual conference of the British Computer Society's Specialist Group on Expert Systems, held in London in September 1990. The theme of the conference,"Business Benefits of Expert Systems," is particularly pertinent, as expert systems mature and begin to be applied in a much wider range of settings. This year three issues in particular were examined: cybernetics, databases, and programming languages. They reflect the ubiquity of expert systems and show how these methods are helping to expand other areas of technology. This is the seventh volume in the conference series, "Research and Development in Expert Systems," and is essential reading for those working in expert systems and artificial intelligence who wish to keep up to date with developments and opportunities in these important fields.
Download or read book Identifying Product and Process State Drivers in Manufacturing Systems Using Supervised Machine Learning written by Thorsten Wuest and published by Springer. This book was released on 2015-04-20 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book reports on a novel approach for holistically identifying the relevant state drivers of complex, multi-stage manufacturing systems. This approach is able to utilize complex, diverse and high-dimensional data sets, which often occur in manufacturing applications, and to integrate the important process intra- and interrelations. The approach has been evaluated using three scenarios from different manufacturing domains (aviation, chemical and semiconductor). The results, which are reported in detail in this book, confirmed that it is possible to incorporate implicit process intra- and interrelations on both a process and programme level by applying SVM-based feature ranking. In practice, this method can be used to identify the most important process parameters and state characteristics, the so-called state drivers, of a manufacturing system. Given the increasing availability of data and information, this selection support can be directly utilized in, e.g., quality monitoring and advanced process control. Importantly, the method is neither limited to specific products, manufacturing processes or systems, nor by specific quality concepts.
Download or read book NASA SP 7500 written by United States. National Aeronautics and Space Administration and published by . This book was released on 1986 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Encyclopedia of Production and Manufacturing Management written by Paul M. Swamidass and published by Springer Nature. This book was released on 2006-09-21 with total page 1012 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Encyclopedia of Production and Manufacturing Management is an encyclopedia that has been developed to serve this field as the fundamental reference work. Over the past twenty years, the field of production and operations management has grown more rapidly than ever and consequently its boundaries have been stretched in all directions. For example, in the last two decades, production and manufacturing management absorbed in rapid succession several new production management concepts: manufacturing strategy, focused factory, just-in-time manufacturing, concurrent engineering, total quality management, supply chain management, flexible manufacturing systems, lean production, and mass customization, to name a few. This explosive growth makes the need for this volume abundantly clear. The manufacturing industry thinks and acts more broadly than it did several decades ago. The most notable change has been the need for manufacturing managers to think in technological, strategic and competitive terms. This is a very favorable development, and it leads to manufacturing success. The entries in this encyclopedia include the most recent technical and strategic innovations in production and manufacturing management. The encyclopedia consists of articles of varying lengths. The longer articles on important concepts and practices range from five to fifteen pages. There are about 100 such articles written by nearly 100 authors from around the world. In addition, there are over 1000 shorter entries on concepts, practices and principles. The range of topics and depth of coverage is intended to suit both student and professional audiences. The shorter entries provide digests of unfamiliar and complicated subjects. Difficult subjects are made intelligible to the reader without oversimplification. The strategic and technological perspectives on various topics give this Encyclopedia its distinctiveness and uniqueness. The world of manufacturing today is increasingly competitive. It is apparent that manufacturers must respond to these competitive pressures with technical and strategic innovation. This encyclopedia has been developed to help researchers, students and those in the manufacturing industry to understand and implement these ongoing changes in the field.
Download or read book Computational Collective Intelligence Technologies and Applications written by Dosam Hwang and published by Springer. This book was released on 2014-09-04 with total page 723 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 6th International Conference on Collective Intelligence, ICCCI 2014, held in Seoul, Korea, in September 2014. The 70 full papers presented were carefully reviewed and selected from 205 submissions. They address topics such as knowledge integration, data mining for collective processing, fuzzy, modal and collective systems, nature inspired systems, language processing systems, social networks and semantic web, agent and multi-agent systems, classification and clustering methods, multi-dimensional data processing, Web systems, intelligent decision making, methods for scheduling, image and video processing, collective intelligence in web systems, computational swarm intelligence, cooperation and collective knowledge.
Download or read book Optimizing Decision Making in the Apparel Supply Chain Using Artificial Intelligence AI written by Calvin Wong and published by Elsevier. This book was released on 2013-01-24 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practitioners in apparel manufacturing and retailing enterprises in the fashion industry, ranging from senior to front line management, constantly face complex and critical decisions. There has been growing interest in the use of artificial intelligence (AI) techniques to enhance this process, and a number of AI techniques have already been successfully applied to apparel production and retailing. Optimizing decision making in the apparel supply chain using artificial intelligence (AI): From production to retail provides detailed coverage of these techniques, outlining how they are used to assist decision makers in tackling key supply chain problems. Key decision points in the apparel supply chain and the fundamentals of artificial intelligence techniques are the focus of the opening chapters, before the book proceeds to discuss the use of neural networks, genetic algorithms, fuzzy set theory and extreme learning machines for intelligent sales forecasting and intelligent product cross-selling systems. - Helps the reader gain an understanding of the key decision points in the apparel supply chain - Discusses the fundamentals of artificial intelligence techniques for apparel management techniques - Considers the use of neural networks in selecting the location of apparel manufacturing plants
